StarTech.comメーカーSV1107IPEXTの使用説明書/サービス説明書
ページ先へ移動 of 54
SV110 7IPEX T KVM over IP with Virtual Media.
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital de- vice, pursuant to par t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interf erence in a residential installation.
Instruction Manual i Instruction Manual T able of Contents Introduction ................................................................................... 1 Features ....................................................................................
Instruction Manual ii User Station Filtering – MAC Addresses ..................................... 21 Custom SSL Cer tificates ............................................................. 21 User Management ........................................
Instruction Manual 1 Introduction The SV1107IPEXT Server Remote Control KVM ov er IP with Vir tual Me- dia capability enables simple management of remote servers from any- where in the world, through remote administrative control, while pro viding a conv enient wa y to monitor computers and ser vers ov er a network, or ov er the Internet.
Instruction Manual 2 Hardware Requirements For best results , we recommend that the computers used to access the SV1107IPEXT control unit hav e at minimum a P entium III 1 GHz proces- sor , with the screen resolution set to 1024 x 768.
Instruction Manual 3 Hardware Guide 1 2 3 4 5 Component Description 1 Reset Switch System Reset: Pressing and holding this switch in f or more that three seconds performs a system reset Restore Factor.
Instruction Manual 4 Hardware Guide - Cont’d Please Note: if you are using a wireless k eyboard/mouse set, connect the receiver to the K eyboard por t of the KVM cable Component Description 1 P ower.
Instruction Manual 5 Computer Preliminary Setup Find your computer’ s IP address and default Gate wa y b y doing the follo w- ing: Click on 1. Start , then RUN . Enter 2. CMD in the text bo x. Click on [ 3. OK ] or press the [ Enter ] ke y . When the command line window opens, T ype 4.
Instruction Manual 6 SV1107IPEXT Preliminary Setup Connect the SV1107IPEXT and your computer to y our network using the follo wing diagram. This is a preliminary set up, so no other connections are needed. Most home networks use automatic IP Addressing, and the SV1107I- PEXT is provided with a def ault fix ed IP address of 192.
Instruction Manual 7 Windows XP and 2000 Locate, and doub le-click on the 1. Network Connections icon, within the Windows Control P anel. Right-click on 2. Local Area Connection (or Wireless network connection) Select 3. Properties . Under the General tab highlight Internet Protocol TCP/IP Click on the 4.
8 Instruction Manual SV1107IPEXT Initial Conguration Open your web bro wser . Y ou will get a P age cannot be displa yed 1. error message, this is normal. In the Address line, type: 2. http:// 192.168.0.60 , then press Enter . When the cer tificate windows pop 3.
Instruction Manual 9 After logging in, click on the 5. Network icon (sho wn below) along the top of the window . Select 6. Set IP Address manuall y (A static IP Address is preferred). The actual address you use is dependent on y our network’ s address range: As an example: In the preliminary set up, the IP Address noted is 192.
Instruction Manual 10 For no w leav e the rest of the settings at their default values (the y will 8. be cov ered later). Click on Apply , then Logout. The SV1107IPEXT will reset. (It is 9. impor tant to log out so the SV1107IPEXT will close the connection).
Instruction Manual 11 Hardware Setup Installation T o install the SV1107IPEXT , ref er to the installation diagram on the f ollow- ing page: Use the Console cable pro vided to connect the SV1107IPEXT’ s 1. Console por t, to the local ke yboard, monitor and mouse, the y are color coded for identification.
Instruction Manual 12 Installation - Cont ’d 1 2 3 4 5 6.
Instruction Manual 13 (Optional) Mounting to a Cabinet/Rack If you wish to mount the SV1107IPEXT in a server/storage rac k/cabinet, using the included brac ket: ( 1 . Figure 1) Remov e the two scre ws closest to the rear panel of the SV1107IPEXT , on the base of the unit.
Instruction Manual 14 Normal Logon T o operate the SV1107IPEXT from an Internet browser , begin by logging in. Open your browser and specify the IP address (assigned in the pre- liminary set up) of the SV1107IPEXT in the browser’ s Address bar . A Security Aler t dialog box, similar to the one below , appears.
Instruction Manual 15 The SV1107IPEXT Main Screen appears: The Main Screen consists of Administration icons arranged horizontally across the top of the screen (see pg. 15), and Utility icons arranged verti- cally on the left side of the screen (described in table below).
Instruction Manual 16 Administration The icons arranged v er tically on the left side of the screen (shown left) are linked to the administration utilities , which are used to configure the SV1107IPEXT . Y our ability to make configuration changes depends on the permissions associated with your login inf ormation.
Instruction Manual 17 Network The Network dialog is used to specify the SV1107IPEXT’ s network envi- ronment. Access P orts If a firew all is being used, the Administrator can specify (in the firew all set up) the por t numbers that it will allow .
Instruction Manual 18 IP Address The SV1107IPEXT can hav e its IP address assigned dynamically at boot- up (DHCP), or can be given a fix ed IP address.
Instruction Manual 19 the operability of the e-mail notification. An e-mail should be sent to the e-mail address specified in the T o: field Please Note: This will only notify you if the SV1107IPEXT changes its address on your local network, it will not notify y ou if your e xter nal ad- dress changes.
Instruction Manual 20 Filtering T o enable IP and/or MA C filter ing, place a checkmark in the IP Filter Enable and/or MA C Filter Enable checkbox. There is a maxim um of 100 filters allowed f or each option. If the • include b utton is check ed, all the addresses within the filter range are allow ed access to the SV1107IPEXT .
Instruction Manual 21 T o delete a filter , select it and click Remove . T o modify a filter , select it and click Edit . The Edit dialog bo x is similar to the Add dialog box. When it appears, simply delete the old address and replace it with the new one .
Instruction Manual 22 Enter the follo wing command: openssl req -x509 -nodes -days 365 -ne wke y rsa: 1024 -keyout m ycer t.pem -out mycert.pem In order to use a custom SSL cer tificate, the created PEM file must then be uploaded through the web interf ace.
Instruction Manual 23 T o delete a user profile, select it from the names displa y ed in the User List panel, and click Remo ve . The user’ s name is remov ed from the User List panel. T o modify a user profile, first select it from the list in the upper panel, then change the information that appears in the User Info dialog bo x.
Instruction Manual 24 Please Note: If a user is denied a permission, that per mission will not be visible on the Utility tool bar , when that user logs on. Customization This configuration page allows the Administr ator to set Timeout , Login Failure , and W orking mode parameters.
Instruction Manual 25 Firmware As new v ersions of the SV1107IPEXT firmware become av ailable , they can be downloaded from our website . Check the website regularly to find the latest inf ormation and packages. T o upgrade the firmware, do the f ollowing: After downloading the ne w firmware file to your computer , open your 1.
Instruction Manual 26 After the upload completes, clic k the 4. Apply icon at the left side of the web page. Enable the 5. Reset on Exit checkbox on the Customization page . Re-click the 6. Apply icon at the left of the w eb page. Click the 7. Logout icon at the upper right of the web page to exit and reset the SV1107IPEXT .
Instruction Manual 27 Open a web browser on the remote computer . 3. T ype in the IP Address you wrote do wn in step 6 of SV1107IPEXT 4. Initial configuration f or e xample http://192.168.1.60, then hit the enter key Y ou will be taken to the SV1107IPEXT Logon screen 5.
Instruction Manual 28 When a connection to the SV1107IPEXT has been established, a 2. screen similar to the one shown here will appear: After you clic k on the Switch b utton, the remote system appears on your monitor . Y ou can work on the remote system via the screen display ed on y our monitor , as if it were y our local system.
Instruction Manual 29 Please Note: Due to network lag, there might be a delay bef ore your ke ystrokes • appear on the screen. Y ou may also hav e to wait a bit for the remote mouse to catch up to your local mouse bef ore y ou click.
Instruction Manual 30 Icon Function Exit from the Windows Client F rom left to right, these icons indicate the current Num Lock , Caps Loc k and Scroll Lock state , respectively .
Instruction Manual 31 T o customize a hotk ey combination: Highlight the Action, and then click 1. Start . K ey in the Function k eys (one at a time). The k ey names appear in the 2. Key field as you press them. When you ha ve finished k eying in your sequence, Clic k 3.
Instruction Manual 32 Action Explanation Substitute Ctrl key If your local computer captures Ctrl ke y combinations, pre venting them from being sent to the remote system, you can implement their effects on the remote system by specifying a function k ey to substitute for the Ctrl k ey .
Instruction Manual 33 Option Usage Screen P osition Adjust the horizontal and vertical position of the remote computer window b y clicking the Arrow buttons . Auto-Sync Click A uto-Sync to detect the v er tical and horizontal offset values of the remote screen and automatically synchronize it with the local screen.
Instruction Manual 34 The Message Board The SV1107IPEXT suppor ts two user logins, (only one user has control at a given time), which can possib ly create access conflicts. T o alleviate this problem, a message board f eature has been provided, allo wing users to communicate with one other .
Instruction Manual 35 By default, messages are posted to all users . T o post a message to an • individual user , select the user’ s name before sending y our message. If a user’ s name is selected, and y ou want to post a message to all • users, select All Users prior to sending a message.
Instruction Manual 36 Show / Hide (User List): When you hide the User List, the User List panel closes. The button is shado wed when the User List is open Exit: Click to close the message board Please Note: Only users who are currently logged on can see the Mes- sage Board - it is not visible on the local monitor .
Instruction Manual 37 F rom the remote computer click on the Vir tual Media icon in the Windows Client Control P anel, this opens the Vir tual Media Connection dialog box: Please Note: More than one USB mass storage de vice ma y be connect- ed and recognized, b ut only the unit selected can be accessed.
Instruction Manual 38 work, once your configuration has been pro ven, the Internet connection will be cov ered. T o connect from y our local network: Ensure the “remote” computer is connected to your network. 1. Ensure the SV1107IPEXT is connected to your local network and to 2.
Instruction Manual 39 The Jav a Applet T oolbar The Ja va Applet’ s toolbar provides utilities to help y ou control remote KVM operations. Please Note: The tool bar is hidden in the blank area at the bottom cen- ter of the screen, and appears when you mo ve the mouse pointer o ver the area.
Instruction Manual 40 Set Video Parameter s: Clicking on this b utton brings up the Video Settings dialog box: Please Note: W e recommend that you perf or m Auto sync immediately follo wing connection, to ensure proper mouse synchronization.
Instruction Manual 41 Mouse Synchronization At times, the local mouse mov ement may lose sync with the remote mouse mov ement. Y ou can tr y getting them back in sync with fast mouse synchronization by mo ving the mouse pointer down into the J av a Applet toolbar .
Instruction Manual 42 When the front panel LEDs flash, disconnect the power adapter from 5. the SV1107IPEXT . Remov e the jumper cap from J9. 6. Close the housing and reconnect the SV1107IPEXT power adapter 7. and cables . After star ting back up , y ou can use the default Username and P ass 8.
Instruction Manual 43 If you ha ve assigned a static IP address to the SV1107IPEXT , this step 1. can be skipped. The SV1107IPEXT features IP Change Notification, which will automatically send an e-mail to your pref erred address, notifying y ou of the new IP Address .
Instruction Manual 44 If you are using A utomatic addressing, click on the drop down arrow labeled Computer Name and select the SV1107IPEXT by name . In the 6. P orts to Open [TCP] space, enter 9000 , 9002 (or the por t numbers you chose) and set the schedule .
Instruction Manual 45 T roubleshooting General Operation SV1107IPEXT is acting erratically: Press and hold the Reset button f or at least three seconds My Virtual Media device is set to “read only” under Windows Vista™ and cannot be made writable: Due to Windows Vista™ security features, no data can be written to a Vir tual Media device .
Instruction Manual 46 When I log in, the bro wser generates a CA Root certificate is not trusted, or a Certificate Error response The cer tificate name is not found on Microsoft’ s list of T r usted Authorities.
Instruction Manual 47 Mouse Synchronization Procedures If the mouse synchronization procedures mentioned in the manual f ail to resolve mouse pointer prob lems f or par ticular computers, try the follow- ing: Note: These procedures are to be performed on the computers attached to 1.
Instruction Manual 48 Windows XP / Windows Server 2003 / Vista™ Set the mouse speed to the middle position, then disable Enhance P ointer Precision (Control P anel −> Pr inters and Other Hardware −> Mouse −> P ointer Options).
Instruction Manual 49 T echnical Support StarT ech.com’ s lifetime technical support is an integr al par t of our commit- ment to pro vide industry-leading solutions. If y ou e ver need help with your product, visit www .star tech.com/suppor t and access our comprehensive selection of online tools, documentation, and downloads .
StarT ech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a div erse IT and A/V customer base that spans man y channels, including gov ernment, education and industrial f acilities to name just a f ew .
デバイスStarTech.com SV1107IPEXTの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
StarTech.com SV1107IPEXTをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはStarTech.com SV1107IPEXTの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。StarTech.com SV1107IPEXTの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。StarTech.com SV1107IPEXTで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
StarTech.com SV1107IPEXTを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はStarTech.com SV1107IPEXTの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、StarTech.com SV1107IPEXTに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちStarTech.com SV1107IPEXTデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
