SterlingメーカーSM3-615aの使用説明書/サービス説明書
ページ先へ移動 of 29
Op er ating In struc tions Con veyor Hop per SSK 5-DURO a 5 1 6 - 3 M S Ster ling Ma te rial Pro cess ing.
Tech ni cal ser vi ce: Ser vi ce de part ment Tele phone: (800) 423-3183 Edi ti on: 10/01 a 5 1 6 - 3 M S SSK 5-DURO 2 The se ope ra ting in struc tions are for:* (* Please fill in per son ally) Se ri.
Ster ling Ma te rial Pro cess ing re tains all rights to chan ge the in for ma ti on in the se ope ra ting in struc t ions at any time wit hout no ti ce. We as su me no lia bi li ty for any er rors or di rect or in di rect da ma ge re sul ting in con - text with the se ope ra ting in struc t ions.
Please note that our address and phone information has changed. Please reference this page for updat ed contact information. These manuals are obsolet e and are provided only for their technical information , data and capacities.
Tab le of con tents 1. Sa fe ty in struc tions ..........................................................5 1.1. War nings and sym bols ..............................................6 1.2. Ex pla na tions and in for ma ti on ...........................
1. Safety in struc tions » These safety in struc tions ap ply to all per sons within the range of ac tion of the equip ment. Please in form all per sons within the range of ac tion of the equip ment of the di rect and in di rect haz ards con nected with the equip ment.
1.1. Warn ings and sym bols The fol lo wing war nings and sym bols are used in the se ope ra ting in struc tions: » This sym bol in di cates dan ger to life! Fa tal or se ri ous in jury is pos si ble if the cor re spond ing in struc tions, reg u la tions or warn ings are not ob served.
1.2. Ex pla na tions and in for ma tion Var i ous terms and des ig na tions are used fre quently in these op er at ing in struc tions to en sure clar - ity. There fore please note that the terms used in the t ext stand for the cor re spond ing ex pla na tions listed be low.
1.3. For your safety · It is ab so lutely nec es sary that you ob serve the op er at ing in struc tions for the cor re spond ing con - vey ing sys tem. · The de vice is in tended ex clu sively for con vey ing plas tic gran ules and regrind. Any other us age is not per mit ted.
2. In stal la tion in struc tions » These in stal la tion in struc tions are in tended for per sons with skills in elec tri - cal and me chan i cal ar eas due to their train ing, ex pe ri ence and re ceived in - struc tions.
2.1. Trans port For trans port, only the ap pro pri ate lift ing gear should be used (e.g. fork lift or work shop crane). » Ob serve the car ry ing ca pac ity of the lift ing gear. Ob serve the safety in struc tions for the han dling of lift ing gear.
2.3. Com pressed-air sup ply (only with com pressed-air valves) For op er at ing the con trol valves, a com - pressed-air sup ply is nec es sary. Check com pressed-air pip ing for cor rect in stal la tion and as sem bly. Check fit tings, length and qual ity of the hose con nec tions for agree ment with re - quire ments.
2.4. Elec tri cal con nec tion » The elec tri cal con nec tion may only be car ried out by trained per son nel. Other per sons are not per mit ted to carry out the elec tri cal con nec tion. The rules of the lo cal elec tric ity board must be ob served.
a 5 1 6 - 3 M S SSK 5-DURO In stal la tion in struc tions 13 AV = clea ning val ve KS = flap switch SV = di aphragm val ve 1 = flap switch (KS) 2 = clea ning val ve (AV) 3 = di aphragm val ve (SV) 4 =.
3. Func tional de scrip t ion The con vey or hop per is used for the au to ma tic con vey an ce of ther mo set du ro plast ma te ri al as well as ther mo plas tic powder. The hop per can only func tion in con nec tion with a vac uum con veyor plant. The hop per works with a fil ter car trid ge.
4. Main te nance » This chap ter is in tended for per sons with skills in elec tri cal and me chan i cal ar eas due to their train ing, ex pe ri ence and re ceived in struc tions.
F Please ob serve the main te nance in ter vals. Be fore start ing main te nance work, clean the equip ment of oil, fuel or lu bri - cants. En sure that ma te ri als and in ci den tals re quired for op er a tion as well as spare parts are dis posed of prop erly and in an en vi ron men tally sound man ner.
4.1. Main te nance in ter val s Dai ly: check war ning signs on equip ment for good le gi bi li ty and com ple te ness. with com pres sed-air val ve: check the oil le vel in the oi ler emp ty the wa ter se pa ra tor check the ope ra ting pres su re in the fac to ry duct work sys tem (max.
4.2.1. Re place the seal ing rings Nonreturn valve Loo sen the tighte ning strap at the hop per lid. Re mo ve the hop per lid . Draw the old seal ing ring off the nozzle (A). In stall the new seal ing ring. Ob serve the di rec - tion of in stal la ti on (B).
Out let flap Draw the old seal ing ring off the noz zle of the ma te rial out let. In stall the new seal ing ring. F Ob serve the di rec tion of in stal la tion.
4.2.2. Ad just t he flap switch Re move the con nect ing plug “flap switch” from the con nec tion hous ing of the hop per. Con nect an ohm me ter to PINS 1 and 4 of the con nect ing plug “flap switch”. Re lease the nuts (A) of the flap switch (B) un til the sup port can be dis placed.
4.2.3. Repla cing the f il ter cartridge Loo sen the tighte ning strap (A). Re mo ve the hop per lid (B). Re mo ve the loc king pin from the threa ded rod (C). Loo sen the 2 flat nuts (D) and re mo ve the sa fe ty pla te (E). Re mo ve the was her (F).
4.2.4. Cleaning the hop per Loo sen the tighte ning strap. Re mo ve the hop per lid. Clean the hop per loader by means of a vac uum cleaner. Mount the hop per lid. Mount the tighte ning strap. Open the tog gle-type fas ten ers (A) on the flap of the hop per loader.
5. Spare parts list » This parts list is only for the use of trained per son nel only. All other per sons are not per mit ted to re pair or to change the equip ment.
V 66412 SSK 5-DURO, com plete a 5 1 6 - 3 M S SSK 5-DURO Spare parts list 24 75 78, 79 74 40 78, 79 41 44 13 2 4 8.
Pos. Or der no. De sig na ti on Wear Code 26487 com pres sed-air val ve, com ple te E 26491 di aphragm val ve, com ple te 2 23066 cy lin der with val ve C 4 09646 sea ling ring C 8 85489 sie ve C 13 0.
Pos. Or der no. De sig na ti on Wear Code 78 85533 ten si on ring E 26451 fastener E 79 28420 sea ling ring B 86 23091 wire cloth C 87 28626 fil ter cloth C 88 28625 sea ling B 89 28839 flap switch wi.
6. Tech ni cal data Di men si on Sheet a 5 1 6 - 3 M S SSK 5-DURO Tech ni cal data 27 Di men sions and data wit hout ob li ga ti on. Di men sions in mm (in.
Elec tri cal man ual » This elec tri cal man ual is in tended to be used only by St er ling ser vice per son - nel and trained per son nel au tho rized by Ster ling.
デバイスSterling SM3-615aの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Sterling SM3-615aをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSterling SM3-615aの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Sterling SM3-615aの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Sterling SM3-615aで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Sterling SM3-615aを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSterling SM3-615aの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Sterling SM3-615aに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSterling SM3-615aデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
