StrongメーカーSRT 7000の使用説明書/サービス説明書
ページ先へ移動 of 25
User Manual Digital High Definition Satellite Receiver SRT 7000 Picture similar.
.
.
1 PART 1 • English English T ABLE OF CONTENTS 1.0 INSTRUCTION 2 1.1 Safety Instructions 2 1.2 Storage 2 1.3 Equipment Set-up 2 1.4 Accessories 3 1.5 Usage of external USB devices 3 2.0 YOUR RECEIVER 3 2.1 PIN code default: 0000 3 2.2 F ront panel 3 2.
2 PART 1 • English 1.0 INSTRUCTION 1.1 Safety Instructions DO NOT INST ALL YOUR RECEIVER: In a closed or poorly ventilated cabinet; directly on top of or under any other equipment; on a surface which might obstruct the ventilation slots.
3 PART 1 • English English This manual provides complete instructions for installing and using this receiver . The following symbols will serve as follow . WARNING Indicates warning information. TIPS Indicates any other additional important or helpful information.
4 PART 1 • English 4. VIDEO (RCA) T o connect to the RCA video input of your TV or VCR using an RCA cable 5. AUDIO (L/R) T o connect to the audio input of your HIFI or television 6. TV SCART T o connect to TV using a SCART cable 7. VCR SCART T o connect to a Video or DVD recorder 8.
5 PART 1 • English English 25. u /PLAY Starts/resumes the playback. 26. 2 /PAUSE Starts/resumes timeshift when USB device is connected. F reezes/ resumes the playback of Multimedia files. 27. 3 /STOP Stops playback/timeshift/record 28. REPEA T Selects different repeat modes during playback 29.
6 PART 1 • English 4.0 FIRST TIME INST ALLA TION After all connections have been made properly , switch on TV and make sure the receiver is connected to the main power . Then switch on the receiver . If you are using the receiver for the first time or restored to factory default, the First Installation menu will appear on your TV screen.
7 PART 1 • English English 6.0 OPERA TION In viewing mode, several features are available to make watching TV a true pleasure. This paragraph describes these features. Please also read chapter 7 . 0 to get familiar with the menu of your new receiver .
8 PART 1 • English 6.4 T eletext Y our receiver includes a fully featured T eletext. T o access T eletext, press the TTX button in viewing mode and use the 0 ~ 9 or pq buttons to select the number of the page you wish to see. Subpages (once loaded and if available) can be selected with the tu buttons.
9 PART 1 • English English T o stop a recording press STOP button on remote control. Another way of doing recordings is to use the Timer – please refer to 7.4.1 Timer of this manual. Average record size (values are approximately , depend from bit rate of actual broadcast): MPEG2 SD channel – 1 hour take about 2.
10 PART 1 • English Disable favourite TV or radio program Repeat the step 1 described above and select Disable in the F avourite T ype window . View favourite program 1. In normal viewing mode (no menu mode) press the FA VOURITE to display a list of favourite programs.
11 PART 1 • English English 7.1.3 Sort Here you can sort your channels in the following orders: Default Sort the channels in the original order By Service Name Sort the channels in alphabetical order (A-Z) By F requency Sort the channels in frequency order (Low-High) By Encrypt Sort the channels from free to scrambled 7.
12 PART 1 • English 7.3 Channel Search T o access the menu press MENU and select Channel Search . It contains two options: Installation and DB ( Data Base ) Management . Select an option and press OK to enter it. Press EXIT to exit the menu. 7.3.1 Installation 7.
13 PART 1 • English English After configuring press OK or BLUE again to start scanning with the selected settings. Y our receiver will now perform an automatic channel search with scan progress shown on screen. During channel search you can skip T ransponders by pressing MENU button, or quit the scan process by EXIT .
14 PART 1 • English 7.3.2 DB Management (save your channel settings on an USB-Storage-Device and load it anytime back) This menu allows you to up/download the channel Data Base of your receiver from/to an USB-Device.
15 PART 1 • English English 7.5 Option Press MENU and select Option . In this menu you can adjust the OSD Language , Subtitle Language , Audio Language , Digital Audio mode and Banner Time . Select an option and press tu to adjust the setting. Press EXIT to exit the menu.
16 PART 1 • English Software update In Main Menu select Software Update and press OK or u to select. There are two software update options available: SW update By OT A The OT A (Over the Air) function allows you to search for software updates available on satellite.
17 PART 1 • English English 7.7 USB Press MENU and select USB . The menu provides Multimedia feature to playback Music , Photo , Movie and with the receiver Recorded files.
18 PART 1 • English Photo Y our receiver allows you to watch a slide show with all photo’s available in the chosen folder . T o use the slide show choose a folder with photo files. Press PLA Y ( u ) to start and STOP ( 3 ) or EXIT to stop the slide show .
19 PART 1 • English English 7.7.2 Photo Configure Slide Time: Y ou can adjust slide show interval to 1~8 seconds. Slide Mode: Y ou can select one of the 60 slide show effects or Random (mixed effects). Aspect Ratio: Keep - displays the picture as its original aspect Discard - displays the picture in full screen mode.
20 PART 1 • English 8.0 TROUBLESHOOTING There may be various reasons for abnormal operation of the receiver . Please check the receiver according to the procedures shown below . If the receiver does not work properly after checking it, please contact your local Serviceline or STRONG dealer .
21 PART 1 • English English 9.0 SPECIFICA TIONS Demodulator Demodulation: QPSK, 8PSK Input symbol rate: DVB-S QPSK: 1 ~ 45 Ms/s DVB-S2 8PSK/QPSK: 10~30 Ms/s FEC decoder: Auto, 1/2, 2/3, 3/4, 5/6, 7/.
22 PART 1 • English General Data Input voltage range: 100 – 240 V AC 50/60 Hz Power consumption: max. 18 W , typ. 8.5 W (without external storage device) Power consumption in standby: max.
デバイスStrong SRT 7000の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Strong SRT 7000をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはStrong SRT 7000の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Strong SRT 7000の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Strong SRT 7000で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Strong SRT 7000を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はStrong SRT 7000の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Strong SRT 7000に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちStrong SRT 7000デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。