BarcoメーカーR9841770の使用説明書/サービス説明書
ページ先へ移動 of 23
L amp K it f or iQ/S IM4/OV DR 1 20 Pr oject or s Installation M anual R9841770 - R9841 771 R9841100 - R9841 111 R9841760 - R9841 761 R5976375/05 20/04/2006.
Barco nv Presentations Noordl aan 5, 8520 Kuurne Phone: +32 56.36.82.11 Fax: +32 56.35.86.51 E-mail: presentations.bid@barco.com Visit us at the web: www.
Copyright © All rights reserved. No part of this document may be copied, reproduced o r translated. It shal l not otherwise be recorded, transmitted or stored in a retrieval system without the prior written consent of Barco.
.
1. Safety 1. SAFETY 1.1 Safety Guidelines This procedure is in tended for use only by qualified service technicians who h ave been trained and authorized by BARCO ! W ARNING : Hot Surfac e and Risk of Explosion:Switch the projector to stand by and let it cool down for at least 15 minutes .
1. Safety 2 R5976375 LAMP KIT FOR IQ/SIM4/OV DR 1 20 PROJECTORS 20/04/2 006.
2. Kit Content 2. KIT CONTENT 2.1 Contents Overview Depending on the Kitnumber ordered the k it may contain 1 or 2 lamps, the lamp power may also differ according to the type of Projector .
2. Kit Content 4 R5976375 LAMP KIT FOR IQ/SIM4/OV DR 1 20 PROJECTORS 20/04/2 006.
3. Replacement pr ocedure in case of an iQ Pr ojector 3. REPLACEMENT PROCEDURE IN CASE OF AN IQ PROJECT O R Overview • Reset lamp runtime • Access to the lamp unit(s) in the iQ projector • Removing the lamp unit(s) • Mounting the Lamp Unit • Mounting the cover .
3. Replacement proced ure in case of an iQ Project or Image 3-2 W ARNING : Lamp runtim e reset as well as the lamp replacement can only be done by a Barco authorized technician. How to reset the l amp runtime in the SIM5Pl us? 1. Press MENU to activate t he T ool bar 2.
3. Replacement pr ocedure in case of an iQ Pr ojector Image 3-4 W ARNING : Lamp runtim e reset as well as the lamp replacement can only be done by a Barco authorized technician. 3.2 Access to the lamp unit(s) in the iQ projector 3.2.1 Removing the back cov er Necessary t ools a flat screwdriver of 10 mm Necessary part s No parts.
3. Replacement proced ure in case of an iQ Project or Image 3-7 right view of the proje ctor , rear cover removed 3.3 Removing the lamp unit(s) 3.3.1 Removing the la mp unit(s) What has to be done ? 1. The lamp power connection has to be disconnected.
3. Replacement pr ocedure in case of an iQ Pr ojector Image 3-10 unlocking lamp 1 & la mp 2 Image 3-1 1 Image 3-12 Lamp 1 removed 3.4 Mounting the Lamp Unit 3.4.1 Mounting the lamp uni t(s) What has to be done ? 1. The lamp has to be mounted 2. The lamp has to be connected.
3. Replacement proced ure in case of an iQ Project or 2. Push the lamp inwards and turn the lamp locking handle over to lock the lamp (i mage 3-13) 3. Connect the lamp (image 3-14) Image 3-13 locking .
3. Replacement pr ocedure in case of an iQ Pr ojector Image 3- 16 3.6 Cleaning How to clean the dustfilters ? 1. Place the projector so as to access easily the filter to be cleaned 2. Push the handle downwards to unlock the filter . (image 3-17) 3. Slide out the filter (image 3-18, image 3-1 9, image 3-20) See image 3-21.
3. Replacement proced ure in case of an iQ Project or Image 3-20 Input filter remo val Image 3-21 Input filter rem oved If the airfl ow is falling under a predetermin ed treshold value a warning will be display ed on the screen. Image 3-22 At that time it is strongly recommende d to replace or clean the dustfilter under the X-cube.
4. Replacement in case of a SIM 4/OV DR120 project or 4. REPLACEMENT IN CASE OF A SIM 4/OV DR120 PROJECT O R 4.1 Lamp replacement C AUTION : Do not touch the cover glass with you r fingers. If the lamp is touched, finger prints can be removed by cleaning the lamp wi th alcohol.
4. Replacement in case of a SIM 4/OV DR120 pr ojector Image 4-1 Location of side door screw Image 4-2 side door open Image 4-3 Lamp discon nected LOCK UNLOCK Image 4-4 Lamp locking handle 14 R5976375 .
4. Replacement in case of a SIM 4/OV DR120 project or Image 4-5 Lamp removed When replacing the lamp it is strongly recom mended to check and clean (or repla ce if necessary) the dustfil- ters.
4. Replacement in case of a SIM 4/OV DR120 pr ojector 16 R5976375 LAMP KIT FOR IQ/SIM4/OV DR 1 20 PROJECTORS 20/04/2 006.
Index INDEX A access 7 C Content 3 cover 7, 10 mounting 10 removing 7 F Filters 1 1 cleaning 1 1 G guidelines 1 recycling 1 K Kit 3 content 3 L lamp 5, 7–9 access 7 mounting 9 removing 8 runtime res.
Index 18 R5976375 LAMP KIT FOR IQ/SIM4/OV DR 1 20 PROJECTORS 20/04/2 006.
Revision Sheet To : Barc o nv Prese ntations Noordlaan 5, 8520 Kuurne Phone: +32 56.36.8 2.1 1, Fax: +32 56.35.86.51 E-mail: presentations.bid@barco.com, Web: www .
デバイスBarco R9841770の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Barco R9841770をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBarco R9841770の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Barco R9841770の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Barco R9841770で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Barco R9841770を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBarco R9841770の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Barco R9841770に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBarco R9841770デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。