SymbolメーカーMC9000-Kの使用説明書/サービス説明書
ページ先へ移動 of 534
MC9000-K/S Product Reference Guide for Embedded Windows ® CE .NET.
.
MC9000-K/S for Embedded Windows ® CE .NET Product Reference Guide 72-65262-03 Revision A June 2004.
© 2004 by Symbol T echnologies, Inc. All rights reserved. No part of this publication may be reproduced or used in any form, or by any electrical or mechanical means, without permission in writing from Symbol. This includes electronic o r mechanical means, such as photocopying, recording, or information storage and retrieval systems.
Revision History Changes to the previous manu al are listed below: Change Date Description -01 to -02 1/15/04 Updated Operatin g system to Win CE 4.2. Added n ew screens and menus, Chapter 2 and Ch apter 3. Updated Chapt er 6, to include Mo bile Companion up grade from vers ion 3.
.
Contents Chapter. About This Guide Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi x Chapter Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NET Product Refere nce Guide vi Battery Charging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-11 Main Battery and Memory Backup Battery Charging . . . . .
Contents vii Entering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-34 Entering Information Using Keypad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-34 Entering Information Using the Keyboard Input Panel .
MC9000-K/S for Embedded Windows® CE .NET Product Refere nce Guide viii Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-20 Background Tab . . . . . . . . . . . . . . . . . . . . . .
Contents ix Bluetooth Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-51 Date and Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-52 Printer Settings .
MC9000-K/S for Embedded Windows® CE .NET Product Refere nce Guide x Chapter 5. Applications Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 ScanSamp2 . . . . . . . . . .
Contents xi Chapter 6. Spectrum24 Network Configuration Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 Mobile Companion . . . . . . . . . . . . . . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NET Product Refere nce Guide xii Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-18 Power Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents xiii Commands . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-54 Modem LED Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-58 Wall Mounting Bracket and Shelf Slide .
MC9000-K/S for Embedded Windows® CE .NET Product Refere nce Guide xiv Chapter 10. Mobile Computer Configuration Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-3 Starting Terminal Configuration Manager .
Contents xv Battery Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-13 Status Tab . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-14 Using the Emulator .
MC9000-K/S for Embedded Windows® CE .NET Product Refere nce Guide xvi Appendix A. T echnical Specifications Mobile Computer Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3 MDM9000 Modem Module Technical Specifications .
About This Guide Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xix Chapter Descriptions . . . . . . . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide xviii.
About This Guide xix Introduction The MC9000-K/S Product Referen ce Guide provides information ab out the MC9000-K and MC9000-S mobile computers using the Embedded Windows® CE .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide xx Chapter Descriptions T opics covered in this guide are as follows: • Chapter 1, Getting Started describes the mobile comp uter�.
About This Guide xxi Notational Conventions The following conve ntions are used in this document: • “Mobile computer” refers to any Symbol terminal.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide xxii Related Documents and Software The following docume nts provide more in formation about the MC9000-K and MC9000-S.
About This Guide xxiii Symbol Support Center For service information, warranty information or technical assista nce contact or call the Symbol Support Center in: United States Symbol T echnologies, Inc. One Symbol Plaza Holtsville, New Y ork 11742-1300 T el: 1- 800-653-53 50 Canada Symbol T echnologies Canada, Inc.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide xxiv Germany/Deutchland Symbol T echno logies GmbH Waldstra sse 66 D-63128 Diet zenbach, Ger many T el: 6074-49020 (Inside Germany) T el: +49-6074-49020 (Ou tside Germany) Italy/Italia Symbol T echnol ogies Italia S.
About This Guide xxv If the Symbol product was purchased from a Sym bol Business Partner , contact that Business Partne r for service. For the latest version of this guid e go to: http://www .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide xxvi.
Getting Started Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Unpacking . . . . . . . . . . . . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 1-2 Spare Battery Charging. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-13 Stylus . . . . . . . . . .
Getting Start ed 1-3 Introduction This chapter describ es the mobile computer’ s physica l characteristics, how to install and cha rge the batteries, replace the strap lan yard, remove and replace the stylus an d start the mobile computer for the first time.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 1-4 Figure 1-2. MC9000-K and MC9000-S: Side V iew Exit Window Headphone Ja ck (optional) Exit Window Headphon e Jack (optional) Scan.
Getting Start ed 1-5 Figure 1-3. MC9000-K and MC9000-S: Back V iew MC9000-S Stylus Hand Strap MC9000-K Primary Batt ery Release Color Camera (optional) Color Camera (optional).
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 1-6 Unpacking Carefully remove all protective material from around the mob ile computer and save the shipping container for storage and/or re-shipping.
Getting Start ed 1-7 Accessories • Single Slot Serial/USB Cradle, charges the mobile computer main battery and a spare battery . It also synchronizes th e mobile computer with a host compute r through a serial or a USB connection.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 1-8 Symbol Windows CE SDK and SMDK Symbol offers two development kits for the MC9000-G: • Symbol Mobility Developer Kit for .NET (SMDK for .NET), available at: http://www .sym bol.com/mc9000-k and http://www .
Getting Start ed 1-9 Main Battery Insertion and Removal Insert the main ba ttery into the mobile computer b efore use. If the main ba ttery is charged th e mobile computer can be used immediately . If the main battery is not charged see Batte ry Charging on page 1-11 .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 1-10 Main Battery Removal T o remove the main battery: 1. Prior to removing the battery , press the red P o wer button to turn off the screen. This sets the mobile computer to suspend mode.
Getting Start ed 1-11 Figure 1-6. MC9000-S: Main Battery Removal Battery Charging Main Battery and Memory Backup Battery Charging The mobile computer’ s cradles, sna p-ons and spare battery chargers ca n be used to charge the mobile computer’ s main battery .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 1-12 Do not remove the main battery within th e first 15 hours of use. If the main battery is removed before the ba ckup battery is fully charged, data may be lost. The following access ories can be used to charge batterie s.
Getting Start ed 1-13 Mobile Computer Charging Procedures The mobile computer main and backup batteries can be charge d using a cradle, the CAM or the MSR.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 1-14 The battery usually fully charges in less than four hours. A Short Battery Adapter is require d to charge the MC9000-S spare ba.
Getting Start ed 1-15 Hand Strap The hand strap may be moved to either the left or right side of the mobile computer to suit use r preferences. T o re position the MC9000-K h and strap: 1. Disengage the upper portion of the hand strap by disconnecting the button from the loop connector .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 1-16 T o re move the MC9000-S hand strap: 1. Disengage the upper portion of the hand strap by sliding it through the clip connector . 2. Unscrew the two screws on either s ide of the mobile comp uter .
Getting Start ed 1-17 Starting the Mobile Computer Insert the battery , if the mobile computer does not power on perform a cold boot, see Resetting the Mobile Computer on page 2-39 . When the mobile computer is powered on for the firs t time, it initializes its flash file system.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 1-18 Calibration Screen Use calibrate screen to align the touch screen: 1. Remove the stylus fro m the handle. 2. Carefully press and briefly hold the tip of stylus on the cen ter of the calibration screen target.
Getting Start ed 1-19 Mobile Computer Configuration The following chapte rs provide the mobile computer configuration information: • T o customize the m obile computer s ettings, see Chapte r 3, Settings . • T o set up Activ eSync to synchronize the mobile comput er and accessories with the host computer , see Chapter 4, Co mmunications .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 1-20.
Operating the MC9000-K/S Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Keypads . . . . . . . . . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-2 Taskbar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-27 Sart Button . . .
Operatin g the MC9000 -K/S 2-3 Introduction This chapter provides basic instruc tions for using and navigating the mobile computer . Keypads The mobile compu ter has five interchangeable modular keypad c onfigurations: • 28-key keypad, see page 2-4 • 43-key keypad, see page 2-8 • 53-key keypad, see page 2-11 .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-4 28-Key Keypad The 28-key keypad is used on bo th the MC9000-K, see Figure 2-1 and the MC9000-S, see Figure 2-2 . It contains a Power button, applic ation keys, scroll key s and a function key .
Operatin g the MC9000 -K/S 2-5 Figure 2-2. MC9000-S: 28-Key Keypad CTRL SP ACE ALPHA BKSP SHIFT AL T 12 ABC 3 DEF 4 GHI 7 PQRS 8 0# TUV 9 WXYZ 5 JKL 6 MNO.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-6 T able 2-1. MC9000-K and MC9000- S: 28-Key Keypad Descriptions Key Description Power (red) Powers the mobile computer on and off. Used to reset the mobile comp uter , see Resetting th e Mobile Computer on page 2-39 .
Operatin g the MC9000 -K/S 2-7 For detailed keypad co nfigurations including ASCII values and VK cod es, see Appendix B, Keypad Maps . Function (blue) Press and r elease the b lue functio n key to act ivate the ke ypad altern ate functi ons (shown on the keypad in blue).
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-8 43-Key Keypad The 43-key keypad is availa ble only on the MC9000-K, see Figure 2-3 .
Operatin g the MC9000 -K/S 2-9 T able 2-2. MC9000-K: 43-Key Descriptions Key Description Power (red) Powers the mobile computer on an d off. Used to reset the mobile computer , see see Resettin g the Mobile Co mputer on page 2-39 . Green/Red D ot Unassi gned appli cation functio n key .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-10 For detailed keypad configuration s including ASCII values and VK codes, see Appendix B, Keypad Maps . AL T Press and r elease the AL T key to a ctivate the k eypad AL T (alternate) f unctions.
Operatin g the MC9000 -K/S 2-11 53-Key Keypad There are two physical configurations of the 53-key keyp ad, however both of the keypads are functionally identic al. The 53-key ke ypad is av ailable only on the MC9000-K. It contains a Power button, application keys , scroll keys and function keys.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-12 T able 2-3. MC9000-K: 53-Key Descriptions Key Description Power (red) Powers the mobile computer on and o ff. Used to reset the mobile computer , see Rese tting the Mo bile Computer on page 2-39 .
Operatin g the MC9000 -K/S 2-13 For detailed keypad co nfigurations including ASCII values and VK cod es, see Appendix B, Keypad Maps . Shift Press and release the SHIF T key to activate the keypad alternate SHIF T functions . The icon appears on the taskbar .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-14 3270 Emulator The 3270 emula tor keypad is ava ilable only on th e MC9000-K. It contains a Power button, application keys, scroll keys and a function key . The ke ypad is color -coded to indicate the alte rnate function key (blue) values.
Operatin g the MC9000 -K/S 2-15 T able 2-4. 3270 Emul ator Descriptions Key Description Power (red ) Powers the mo bile computer o n and off. Used to reset t h e mobile comp uter , see Resetting th e Mobile Computer on page 2-39 . Green/Red Dot Unassigned applicatio n function key .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-16 For detailed keypad configuration s including ASCII values and VK codes, see Appendix B, Keypad Maps . Shift Press and release the SH IF T key to activate the keypad alternate SHIF T function s.
Operatin g the MC9000 -K/S 2-17 5250 Emulator The 5250 emulator keypad is available only on the MC9000-K. It contains a Power button, application keys, scroll keys and a function key . The keypad is color - coded to indicate the a lternate function key (blue) values.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-18 T able 2-5. 5250 Emul ator Descriptions Key Description Power (red) Po wers the mobile comput er on and off. Used to reset the mobile computer , see see Resetting th e Mobile Computer on page 2-39 .
Operatin g the MC9000 -K/S 2-19 For detailed keypad co nfigurations including ASCII values and VK cod es, see Appendix B, Keypad Maps . Shift Press and release the SHIF T key to activate the keypad alternate SHIF T functions. The icon appears on the taskbar .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-20 VT Emulator The VT emulator keypad is available only on the MC90 00-K. It contains a Power button, application keys, scroll keys and a function key . The ke ypad is color -coded to indicate the alte rnate function key (blue) values.
Operatin g the MC9000 -K/S 2-21 T able 2-6. VT Emul ator Descriptions Key Description Power (red) Powers the mobi le computer on and of f. Used to rese t the mobile compu ter , s ee Resetting th e Mobile Computer on page 2- 39 . Green/Red Dot Unassigned ap plication funct ion key .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-22 For detailed keypad configuration s including ASCII values and VK codes, see Appendix B, Keypad Maps . Shift Press and release the SHIF T key to activate the keypad alternate SHIF T functions.
Operatin g the MC9000 -K/S 2-23 Keypad Special Functions The keypad special fun ctions are color coded on the keypads. For ex ample, on the 53-key keypad, th e display backlight icon is b lue indicating that the bl ue function ke y must be selected first to access the display backlight.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-24 Power Button Press the red Power button to turn the mo bile computer screen on and off. The mobile comp uter is on when the display is on and the mobile computer is in sus pend mode when the display is off.
Operatin g the MC9000 -K/S 2-25 Series 9000 Demo Window On initial power up (or on a warm or cold boot) the Series 9000 Demo window a ppears. The Serie s 9000 Demo windo w icon functions are provided in T able 2-8 . Figure 2-8. Series 9000 Demo Window T able 2-8.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-26 The Series 9000 Demo window is the factory default launche r menu. Application specific shells may vary . Displays the control panel menu, see Control Panel on page 3-40 . Starts the PC Link application, see PC Link on page 5-16 .
Operatin g the MC9000 -K/S 2-27 T askbar The taskbar (at the bottom of the window) displays the Start button, active programs (in this case PC Link and Mobile Companion ), batte ry status and the communication status. Th e default taskbar icons are described in T able 2-9 and the default task bar buttons are described in T able 2-10 on page 2-28 .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-28 T able 2-10. T askbar Buttons Icon Description The Start button. T ap t o display th e Start menu. The Keyboard Input Pan el, display button. T ap to display the Keyboard Input Pa nel.
Operatin g the MC9000 -K/S 2-29 Sart Button T ap the Start button to launch the Start Menu or tap the Start button while in the AL T state and the T ask Ma nager , Properties menu appears, see T ask Manager and Properties on page 2-31 .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-30 T askbar Icons The taskbar icons display the functio n status, indicate what programs are active and indicate the battery charge stat us. The taskbar ic ons are provided in T able 2-9 on page 2-27 .
Operatin g the MC9000 -K/S 2-31 T ask Manager and Properties Use the T ask Manager to stop applications and u se th e Properties functions to set display and clock options. T ask Manager 1. Select Function - CTRL , ( to activate the AL T state ) and tap the Start button to display the T ask Ma nager , Properties Selection menu.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-32 Properties 1. Select Function - CTRL , ( to activate the AL T state ) and tap the Start button to display the T ask Ma nager , Properties window , see Figure 2-11 on page 2- 31 .
Operatin g the MC9000 -K/S 2-33 Advanced T ab 1. T ap the Advanced tab to enter the T askbar and Start Menu, Advanced T ab. 2. T ap the Clear button to delete all of the documen ts listed in the Start - Documents entry , see Sart Bu tton on page 2-29 .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-34 Entering Information T o enter information: • Use the keypad. • Use the input panel (soft ke yboard) to enter typed text.
Operatin g the MC9000 -K/S 2-35 Data Capture The mobile computer has an integrat ed scanner used to collect data by scanning bar cod es. Laser Scanning T o s can bar codes w ith the mobile co mputer: 1. Ensure that the mobile computer is loaded with a scann ing application.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-36 Scanning Considerations T ypically , scanning is a simple matter of aim, scan/decode and a few quick trial efforts master it.
Operatin g the MC9000 -K/S 2-37 Imaging The imager version of the mobile compute r has the followin g features: • Omnidirectional reading of a variet y of bar c ode symbologie s, including the most popular linear , postal, PDF417 a nd 2-D matrix code types.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-38 Aiming the Imager The imager version of the m obile computer projects a laser aiming pattern (shown below) similar to those used on ca meras. The aiming pattern is u sed to position the bar cod e or object within the field of view .
Operatin g the MC9000 -K/S 2-39 2. The aiming pattern is smaller when the Imager is closer to the symb ol and larger when it is farther from the symbol. Scan symbols with smaller bars or elements (mil size) closer to the unit and those with larger bars or elements (mil size) farther from the unit.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-40 Performing a Cold Boot A cold boot restarts the mobile compu ter and erases all user stored records and entries. Never perform a cold b oot unless a warm b oot does not solve the problem.
Operatin g the MC9000 -K/S 2-41 W aking the Mobile Computer The wakeup conditions are configurable and the current factory default settings are subject to change/update.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-42 File Sy stem Directory Structure The mobile compu ter directory structure dis plays all of the file fold ers, see Figure 2-20 . The pre- installed folders are in flash file system memo ry and optional removable storage devices (MMC storage cards).
Operatin g the MC9000 -K/S 2-43 Flash Storage In addition to the RAM-b ased storage the mobile co mputer is also equipped with a non-volatile Flash- based storage area which can store data (partitions) that can not be corrupted by a cold boot, see Flash Storage on pag e 10-27 for a detailed dis cussion.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 2-44 T erminal Emulators Use the Terminal Em ulator s icon to enter the Wavelink terminal emulator application. From the Series 9000 Demo windo w , d ouble-tap the T ermin al Emulators icon .
Settings Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 Windows Control Panel Menu . . . . . . . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-2 Input Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22 Keyboard . . . . . . . . .
Settings 3-3 Comm Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-56 Display Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-4.
Settings 3-5 Introduction This chapter provides basic instruc tions for customizing the mobile computer by adjusting settings. The system settings are acce ssed from the Windows CE Control Panel menu .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-6 T able 3-1. Windows Control Panel Menu Icons Icon Description Scan for , and se tup Blueto oth compatib le hardware, see Bluetooth Device Pr operties on page 3-8 for more in formation.
Settings 3-7 Adjust doubl e-click sensitivi ty for both the speed an d timing. Connect to ot her computers, networks, and the Int ernet throug h a modem, see Certificates on page 3-15 for more information. Change ow ner's persona l profiles, see Owner on page 3-26 for more information.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-8 Bluetooth Device Properties Use the Bluetooth Manager w indow to discover and create bonds with other Bluetooth devices. The mobile computer can receive informa tion from discovered devic es, without creating a bond.
Settings 3-9 2. Scroll down the Power Settings windo w and double tap wlp1: Wireless LAN . 3. Double tap D4 in the S24 Power Selection window . This setting turns off the S24 radio.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-10 4. Scroll up the Power Settings window and double tap com3: Bluetooth serial . 5. Double tap D0 in the Bluetooth Power Se lection windo w . This turns on the Bluetooth radio. Figure 3-4.
Settings 3-11 Starting Bluetooth 1. Select Start - Settings - Control Panel, and double-tap the Bluetooth Device Properties icon. Figure 3-5. Bl uetooth Manager Window 2. T ap the Scan Device button to initiate a scan for Bluetooth ha rdware. The Bluetooth manager lists the Bluetooth devic es that it finds, see Figure 3-6 .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-12 Figure 3-7. Bluetooth Error Window If the device to which the mobile computer is bon ding does not appear in the list, ensure it is turned on, in discoverable mod e, and within range (30 feet/ 10 meters) of the m obile computer .
Settings 3-13 3. Double tap the d evice to connect to on the device list. The Bluetooth Manage r Authentication window ap pears. T ap No to connect to the device without authen tication, or tap Ye s to authentica te the device b efore connecting. Figure 3-8.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-14 5. When prompted, the same PIN must be entered on the othe r device. When the PIN is entered correctly on the other dev ice, the bonded icon app ears on the device list. Figure 3-10.
Settings 3-15 Certificates Certificates are used by some applica tions for establishing trus t and for secure communications. Certificates are sig ned and issued b y certificate authorities and are valid for a prescribed period of time. Windows CE manages multiple certific ate stores.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-16 Date/T ime Use the Date/T ime Pro perties window to change the date, time and time zone informatio n. 1. Select Start - Settings - Control Panel, and double-tap the Date/T ime icon.
Settings 3-17 Device Management Use Device Management to keep track of software and hardware, inventory , and configure devices remotely . The device manage ment client contains a download/install engine that allows users to receive software and notifications when there are new app lica tions or Operating System (OS) upda tes.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-18 Dialing Use the Dialing Pr operties window to set dialing properties for modem communication and change telephony settings. 1. Select Start - Settings - Control Panel, and double-tap the Dialing icon.
Settings 3-19 7. T o edit the dialing properties select the location from the Lo cation: drop-down list, and tap Edit. The Edit Dialing Patte rns window appears. 8. Use the codes listed in T able 3-3 , edit the dialing patterns in the Edit Dialing Patterns window .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-20 Display Use the Display Properties window to change desk top background image and the display appeara nce. Background T ab T o select the ba ckground image: 1. Select Start - Settings - Control Panel, and double-tap the Display icon, tap the Backgrou nd tab.
Settings 3-21 Appearance T ab T o change the color sc heme: 1. Select Start - Settings - Control Panel, and double-ta p the Display icon, tap the Appearance tab. Figure 3-18. Display Properties - Appearance T ab 2. From the Scheme: drop-down list, select a scheme.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-22 Input Panel Use the Input Panel Properties window to switch input meth ods and to set the input options. 1. Select Start - Settings - Control Panel , and double-tap the Input P anel icon.
Settings 3-23 Keyboard Use the Keyboard Properties win dow to change the keyboard repeat rate and repeat de lay . 1. Select Start - Settings - Control Panel, and double-tap the Keyboard icon. Figure 3-21. Keyboard Pr operties - Repeat T ab 2. T ap the Enable character repeat c heck box.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-24 Mouse Use the Mouse Properties window to adjust stylus double-tap timin g. 1. Select Start - Settings - Control Panel , and double-tap the Mouse icon. Figure 3-22. Mous e Properties Window 2.
Settings 3-25 Network and Dial-up Connections Use the Connection window to set connections to other compute rs, networks, and the Internet. 1. Select Start - Settings - Control Panel, and double-tap the Network and Dial-up Con nections icon. Figure 3-23.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-26 Owner Use the Owner Properties window to enter the owner inform ation. The information can be displayed when the mobile computer is turned on. T o enter information: Identification T ab 1.
Settings 3-27 Notes T ab 1. Select the Notes tab an d enter information in the Notes box to add more information. 2. Select the Display owner no tes box to include th is information on the startup display .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-28 PC Connection Use the PC Connection Properties window to set the mobile c omputer communication baud rate (with the host computer). 1. Select Start - Settings - Control Panel , and double-tap the PC Co nnection icon.
Settings 3-29 Regional Settings Use the Regional Settings, to set the way the mo b ile computer displays dates, times, currenc y amounts, large numbers, and nu mbers with decimal fractions. The sys tem of measurement can also be set to either metric or U.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-30 Number T ab 1. Select the Number tab. Figure 3-30. Regional Setti ngs Properties - Number T ab 2. Select desired op tions. The available options are determined b y the Y o ur local: selection and by the User Interface Language selection (on the Region tab).
Settings 3-31 Ti m e Ta b 1. Select the Ti m e t a b . Figure 3-32. Regional Setti ngs Properties - T ime T ab 2. Select desired o ptions. The avail able options are deter mined by the Y our local: selection and by the User Interface Language selection (on the Region tab).
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-32 Remove Programs Use the Remove Program s window to remove user installed programs from the mobile compute r: 1. Select Start - Settings - Control Panel, and double-tap the Remove Progra ms icon.
Settings 3-33 Stylus Use the Stylus Properties w indow Double-T ap to adjust dou ble-tap timing and use the Calibra te tab to recalibrate the touch screen. Double-T ap T ab 1. Select Start - Settings - Control Panel , and double-tap the Stylus icon. Figure 3-35.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-34 Calibrate T ab 1. Select Start - Settings - Control Panel , and double-tap the Stylus icon. Figure 3-36. Stylus Pr operties - Calibration T ab 2. Select the Calibration tab. 3. In the Calibration tab, tap Recalibrate .
Settings 3-35 Sy stem Use the System Properties window to v iew general system properties , change memory settings, inp ut device name and view copyright information. General T ab The General tab view displays general system settings: 1. Select Start - Settings - Control Panel , and double-tap the System icon.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-36 Memory T ab Use the Memory tab to adjust the RAM allocation. 1. Select Start - Settings - Control Panel , and double-tap the System icon. 2. Select the Memory tab. Figure 3-38. Sy stem - Memory T ab 3.
Settings 3-37 Device Name T ab Use the Device Name tab to customize the device name and description. 1. Select Start - Settings - Control Panel , and double-tap the System icon. 2. Select the Device Name tab. Figure 3-39. Sy stem Proper ties - Device Name T ab 3.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-38 Copyrights T ab The Copyrights tab displays relevant copyright information. 1. Select Start - Settings - Control Panel , and double-tap the System icon. 2. T ap the Copyrights tab to view the copyrigh ts statement.
Settings 3-39 Series 9000 Demo Window On mobile computer power up, the Series 9000 Demo window appears, this window is used to access the Series 9000 Demo window settings fun ctions and the demo a pplications. T able 3-4 provides the settings functions icons a nd T able 3-4 on page 3-39 provides the demo application icons.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-40 Control Panel Use the Control Panel to change settings for th e mobile computer . From the Series 9000 Demo window , dou ble-tap the Ctl Panel icon to display the Co ntrol Panel window .
Settings 3-41 Scanner Settings Set scan parameters, see Scann er Settings on page 3 -59 . T able 3-5. Control Panel Menu (Continued) Menu Item Description.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-42 About Ctl Panel Use the About Ctl Panel win dow to view the system’ s control panel software version information. 1. Double-tap the Ctl P anel icon - double-tap Abou t. The About window appears.
Settings 3-43 Sy stem V ersion Use the System V ersion windo w to view th e system software vers ions. 1. Double-tap the Ctl P anel icon - double-tap System Versions. The System V ersio ns window appears. Figure 3-44. Sy stem V ersion Window 2. T ap OK to return to the Control Pan el window .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-44 Unique Unit ID Use the Unique Unit ID (UUID) window to view the uniq ue unit ID version information. The UUID provides a way of uniquely identifyin g each unit. Some software packages require a UUID.
Settings 3-45 Persist The Persist setting is made in the Control Pane l window , see Figure 3-42 on page 3-40 . It is used in conjunction with a parameter settings to save the new se tting(s) in a .reg file in the /Applications directory . Enable Persist prio r to changing any settings if the settings are to be saved over a cold boot.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-46 Battery Use the Battery window to view the battery status. 1. Double-tap the Ctl P anel icon - double-tap Battery . Th e Battery w indow appears. Figure 3-46. Batt ery Status Window Do not use the Backup volta ge value .
Settings 3-47 Power Settings Use the Power Settings window to view and set th e power setting paramet ers. Double-tap the Ctl Pane l icon - double-tap Power Settings.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-48 Use the power settings with caution. Some of the se ttings allow the user to turn off the display , or to disable the keypad/touch screen.
Settings 3-49 kbd1: Keyboard Power Key Wake Ti m e o u t W a k e API Call Wake D0 D3 D4 Set the Wake on=Y es, off=No Set the Wake on=Y es, off=No Set the Wake on=Y es, off=No When selected feature is .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-50 wlp1: Wireless LAN Power Key Wake Ti m e o u t W a k e API Call Wake D0 D3 D4 Set the W ake on=Y es, off=No Set the W ake on=Y .
Settings 3-51 Bluetooth Settings Use the Bluetooth Settings window to displa y the bluetooth parameters. Mobile computers that do no t ha ve Bluetooth capab ility display UNKNOWN values. 1. Double-tap the Ctl P anel icon - double-tap Bluetooth Settings.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-52 Date and T ime Use the Date and T ime window to set the date, time and time zone inform ation for the mobile computer . 1. Double-tap the Ctl P anel icon - double-tap Date and T ime.
Settings 3-53 Printer Settings Use the Printer Settings window to select th e printer information. 1. Double-tap the Ctl P anel icon - double-tap Printer Settings. The Printer Settings window appears. Figure 3-50. Printer Settings Window 2. T o select a printer , tap the Selected Printer item in the Printer Settings column.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-54 4. Double-tap Printer Parameters to enter the Printer Parameters window . Figure 3-51. Printe r Parameters Window 5. T ap the Selected Printer item in the Printer Settings column.
Settings 3-55 7. T o view the V ersion Information , double-tap the Version Info item in the Printer Settings column. 8. V ersion information includes: •A P I V e r s i o n • PDD V ersion • MDD V ersion • TldV ersion. Figure 3-52. Printer V e rsion Information Window 9.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-56 Comm Settings Use the Comm Settings window to select th e communicati ons settings. 1. Double-tap the Ctl P anel icon - double-tap Comm Settings. Th e Comm Settings window appears.
Settings 3-57 Display Settings Use the Display Settings window to set the display parameters. 1. Double-tap the Ctl P anel icon - double-tap Display Settings.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-58 Audio Settings Use the Audio Settings window to se t the audio parameters. 1. Double-tap the Ctl P anel icon - double-tap Audio Settings. The Audio Settings window appears. Figure 3-55.
Settings 3-59 Scanner Settings Use the Scanner Settings window to set the sca nner information. 1. Double-tap the Ctl Panel icon - do uble-tap Scanner Settings. The Scanner Settin gs window appears. Figure 3-56. Scan Settings Window 2. T o change any item in the Scanner Settings co lumn, use the up and down arrows to select the item.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-60 Reader Parameters Use the Reader Parameters window to set the scanning read parameters. 1. Double-tap the Ctl P anel icon - double-tap Scanner Settings - double-tap Reader Parameters.
Settings 3-61 4. T ap OK to return to the Control Pan el window . Interface Parameters Use the Interface Parameters window to set the scann ing interface para meters. 1. Double-tap the Ctl P anel icon - double-tap Scanner Settings - double-tap Interface Parameters.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-62 4. T ap OK to return to the Control Panel window . Scan Parameters Use the Scan Parameters window to set the scan parameters. 1. Double-tap the Ctl Panel icon - double -tap Scanner Settings - double-tap Scan Params.
Settings 3-63 T able 3-10. Scan Parameters Scan Parameters V alues Code ID T ype None, Symbol, A IM Scan T ype Forgrnd, Bkgrnd, Monitor Local Feedback T rue, False W AV File See Figu re 3-60 on page 3-64 , T ap Decr ement to move back on the W AV file listing and Increment to move fo rward on the W AV file listing.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-64 4. T ap OK to return to the Control Panel window . WAV F il e Use the WAV F i l e window to select a .wav file. Use the Increment and Decrement buttons to scroll through the wav file listing.
Settings 3-65 Device Information Use the Device Information window to view the scanner informa tion. 1. Double-tap the Ctl P anel icon - double-tap Scanner Settin gs - double-tap Scan Parameters. The Scan Parameters window appea rs. Figure 3-61. Device Info rmation Parameters Window 2.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 3-66 Scanner V ersion Use the Scanner Version window to view the scanne r version information. 1. Double-tap the Ctl P anel icon - double-tap Scanner Settings - double-tap Scanner V e rsion.
Communications Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Installing Communication Software . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-2 Ethernet Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-16 Installing MobileDox Cradle Manager .
Communications 4-3 Introduction The mobile compu ter is capable of comm unicating with a number of hosts, including develop ment computers, serial devices, printers, etc.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-4 ActiveSync software: • Allows the user to work with mobile computer -co mpatible host applications on the host computer . ActiveSync replicates data from the mobile computer so data can be viewed, entered and modified on the mobile computer with the hos t application.
Communications 4-5 T o set up a partn ership: 1. If the Get Connected win dow does not appear on the host computer , select Start - Programs - Microsoft ActiveSync - File - Get Connected . Figure 4-1. Get Connected Window 2. Connect the mobile com puter to the host co mputer usin g the appropriate Serial connection (see Chapter 7, Acces sories ).
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-6 4. The host computer and the mobile computer attempt to syn chronize. The New Partnership window appears. Figure 4-2. New Partnership Window 5. Click the Standard partnership radio button and then select Next .
Communications 4-7 6. Click the Synchronize with this de sktop computer radio b utton and select Next . The New Partnership/Select Number of Partnerships window appears. Figure 4-4. How T o Sync Window 7. Click the Y es, I want to synchronize with only this comp uter radio button and then select Next .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-8 9. Select Next . The New Partnership /Setup Complete windo w appears. Figure 4-6.
Communications 4-9 During the first synchronizatio n, information stored o n the host computer is copied to the mobile computer . When the copy is complete an d all data is synchronized, the mobile computer can be disconnect from the h ost computer . The first ActiveSync operation must be performed with a local, direct connection.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-10 Serial Communications Setup The serial communications se tup can be used to set up to communicate with a Single Slot Serial/USB Cradle, M SR or a CA M.
Communications 4-11 5. Start ActiveSync if it is not ru nning on the host compu ter . T o start, select Start - Programs - Microsoft ActiveSync . Figure 4-9. ActiveSync - Not Connected 6. In the Ac tiveSync window , select File - Conne ction Settings and ensure the sele ctions shown in Figure 4-10 are made.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-12 7. T ap OK to save any changes mad e. Every mobile computer should have a unique device name.
Communications 4-13 USB Connection Setup 1. The USB communications setup can be us ed to set up to communicate with a Single Slot Serial/USB C radle, MSR or a CAM. 2. On the mobile computer double-tap the Ctl Panel ico n and double-tap Comm Settings to enter the Comm Settings, window .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-14 6. Start ActiveSync if it is not running on the ho st computer . T o start, sele ct Start - Programs - Microsoft ActiveSync .
Communications 4-15 8. T ap OK to save any changes made. Every mobile computer should have a unique device name. Never try to synchronize more than one mobile computer to the same name.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-16 Ethernet Setup The Ethernet connection can only be established with the Four Slot Ethernet crad le.
Communications 4-17 Installing eConnect eConnect is used only when esta blishing a connection usin g the Four Slot Ethernet Cradle. 1. T o install the eCo nnect on the mobile co mputer , downlo ad the latest version of the software on to the host computer (from http://devzone.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-18 3. Double-tap the eConnect .ca b file, the eConnect install window appears. Double -tap OK . Figure 4-15. eC onnect Install Window 4. Double-tap the Files ic on, open the Windows directory and double-ta p the control.
Communications 4-19 5. Double-tap the eConne ct icon, the eConnect Properties window app ears. Figure 4-17. eConnect Icon Window 6. T ap the Establish TCP/IP Connection checkbox a nd select USB from the Serial Port Baud Rate drop down menu. Double-tap OK to enter the settings and complete the eConnect installation.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-20 Mobile Computer Configuration Inserting the mobile computer into the cradle provides direct-connect RAS service. Configure each mobile computer for use with the cradle, just as any remote client would be config ured to connect to an Internet Service Provider (ISP).
Communications 4-21 Host Computer Configuration The host computer must be setup with the app ropriate communication software and connection settings. This describes usin g Microsoft ® ActiveSync software on both the terminal and the host computer . T o configure the h ost computer: 1.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-22 DHCP Server Configuration If you use a DHCP server to dis tribute IP addres ses and other netwo rk parameters, setup the server.
Communications 4-23 Cradle Configuration The MobileDox Cradle Manager allows you to setup the Device IP Address and modify cradle settings. See Installing MobileDox Cradle Manage r on page 4-16 for instructions to download and install the software. T o connect the cradle, see Fo ur Slot Ethernet Cradle on page 7-28 .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-24 Modifying Cradle Setti ngs 1. Launch the MobileDox Cradle Manager on your hos t computer . 2. Select the name of the cradle you want to configure from the list . 3. Click Device - Modify Settings .
Communications 4-25 5. Use the TPC/IP Settings tab to modify the DNS and WINS identification settings of the cradle. Figure 4-22. MobileDox, TPC/IP Settings Window Field D escri ption Use DHCP If checkbox is selected, necessary information will be retrieved from the DHCP server .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-26 6. Use the Port Settings tab to modify the USB po rt settings of the cradle. Figure 4-23. MobileDox, Port Settings Window 7. Click OK . Field Description Port Name A text string used to describe the device attached t o the port.
Communications 4-27 Connecting to the Internet on a Wireless Network The mobile compu ter can connect to the Internet a cross a wireless network. T o s et up a wirele ss connection: 1. T ap the Mobile Companion icon , on the taskbar . 2. T ap Find WLANs .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-28 8. Select the Authentication tab to configu re server -based au thentication through IEEE 802.1x or Kerberos. Select an option (None, Ke rberos, LEAP , EAP-TLS, PEAP) from the Authentication drop-down list.
Communications 4-29 Figure 4-28. Mobile Companion - Authentication T ab (EAP-TLS) Figure 4-29. Mobile Compani on - Authentication T ab (PEAP) EAP-TLS Au thenticati on Install / View Certificates PEAP .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-30 9. Select the Encryption tab to set the adapter profile security level by con figuring the encryption scheme and correspon ding keys. Select an option (Open Sys tem, WEP , Keyguard- MCM, TKIP (WP A)) from the Encryption drop-down list.
Communications 4-31 12. In the IP T y pe drop-down menu, select either DHC P or Static . T o select static IP , enter the required data in the fields that appear in th e window . See the network administrator for this information. 13. T ap OK and Ta p OK .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 4-32.
Applications Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 ScanSamp2 . . . . . . . . . . . . . . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 5-2 AudioSamp . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-13 Images . . . . . . .
Applications 5-3 Introduction T w o type of applications are provid ed. Example app lications provide the app lication developer with sample applications that can be used to assist in application development. The source code is available for these applications in the Symbol Windows CE SMDK for Series 9000 .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 5-4 T able 5-1. Applications Icon Description Displays the ScanSamp2 example applicatio n that is use d to set up and run th e example scan applicatio n, see ScanSamp2 on page 5-6 . Displays the InkWiz sample application.
Applications 5-5 The windows shown are configured as part of the factory default demo program (OTL.exe). OTL.exe can be configured via registry settings to user specified applications. Displays the MSR 9000 Cameo setup application , see MSR Cameo on page 5-26 .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 5-6 ScanSamp2 Use the ScanSamp2 example application to enable the mobile computer’ s scann er and display scanned data. It also allows the user to chang e the scan parameters. From the Series 9000 Demo window , double-tap the Scan icon.
Applications 5-7 Parameters Window The Parameters window is used to set the scan parameter . • T ap Code ID to select the code ID value (None, Symbol, AIM).
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 5-8 Codes Window The Codes window is used to set the scan type parameter . • T ap Param to select the code types, tap in the box to select a code type.
Applications 5-9 InkWiz File Browser Use the InkWiz file browser example application to browse, cut, copy , paste, delete files and to execute programs. From the Series 9000 Demo window , dou ble-tap the Files ic on . The InkWiz Example win dow appears.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 5-10 Internet Explorer Use Internet Explorer , to view Internet or intranet Web pages on the mobile computer . A modem, an Ethernet connection or a Spectrum2 4 connection is required to connect to an Internet service provide r (ISP) or network.
Applications 5-11 Setting up a Proxy Server Proxy servers are often use d when connecting to the In ternet through a local network, su ch as a corporate network, for added security . T o set the proxy server settin gs: 1. From the menu bar , select View - Options - Proxy Server tab.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 5-12 Remote Desktop Use Remote Desktop connection to log onto a Windows T ermina l Server and to use the programs installed on the server . For exam ple, instead of running Microsoft Pocket Word, the desktop version of Microsoft Word can be run.
Applications 5-13 Disconnecting and Ending a Session T o end a se ssion: 1. In the Rem ote Desktop Connection window , select Start - Shutdown. 2. T ap Log Off. 3. T ap OK . AudioSamp Use the AudioSamp application as an example of how to work with audio files such as recording and playback.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 5-14 I mages Use the Images application as an examp le of how to work with image files, p anning, zooming, saving and reading. 1. From the Series 9000 Demo window , double-tap the Images ic on.
Applications 5-15 T able 5-2. Images Button Descriptions Button Descripti on Button Descriptio n Pan Up (panni ng mode), increase vertical size of image. Pan Down (panning mode), decrease vertical size of image. Pan left (pannin g mode), decrease ho rizontal size of image.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 5-16 PC Link Use the PC Link icon as a shortc ut to the device-side Active -Sync component repllog.exe. Microso ft ActiveSync, synchronizes the informatio n on the desktop computer with the information on mobile computer .
Applications 5-17 About OTL Use About OTL example application win dow to display the OTL software version information. 1. From the Series 9000 Demo window , double-tap About OTL ico n. The About OTL window appears. Figure 5-12. About OTL Window 2. T ap OK to return to the Series 9000 Demo windo w .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 5-18 Self T est Use Self T est to test the spe cified mobile computer functions. T able 5-3 lists the tests and the test descriptions. 1. From the Series 9000 Demo window , double-tap Te s t A p p s icon - double-tap - Se lf T est icon.
Applications 5-19 2. From the T est Applications window ( Figure 5-1 on page 5-3 ), doubl e-tap the Self T est icon to enter the Self T est window . Select the One T ime radio bu tton to run each of the tes ts only once, or select the Continuously radio button to run the tests contin uously , or until the prompt to stop runnin g them is selected.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 5-20 Select the Prompt for status after each test, checkbox to display a test confirmation window after the completion of e ach test. The test confirmation window prompts the user to confirm if the test was successfully completed.
Applications 5-21 Notify Use Notify to test the mobile computer LED functions. 1. From the T est App lications window , double-tap the Notify icon. The Notify window appears . Figure 5-15. Notify Windows 2. T ap an Object Name to select th e item. 3. T ap Edit to set th e parameters.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 5-22 Keyboard Use the Keyboard applica tion to test the mo bile computer keypa d functions. 1. From the T est Applications window , double-tap Key board icon. The Ke yCheck window appears .
Applications 5-23 Display Use the Display window to test the mobile computer display functions. 1. From the T est Applications window double-tap Display to enter the Display window . The display test automatically runs through the display test windows.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 5-24 Memory Use the Memory applicatio n illustrates how an application should ha ndle memory messages it receives from the Shell in the event of low memory conditions. 1. From the T est Applications window double-tap the Memory icon.
Applications 5-25 MSR9000 The MSR9000 application is designed to work with the MSR. This sample application illustrates how an application should handle MSR inputs. The MSR must be attached to the mobile computer before the sample applicat ion is executed.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 5-26 MSR Cameo The MSR Cameo application is designed to wo rk with the MSR Cameo magnetic stripe reader and printer . This sample application illustrates h ow an application should handle MSR inputs.
Applications 5-27 Printing The Printing application illustrates how an application should handle printer outputs. From the T est Applications window , double-tap the Printer icon. The Printer window appears . Figure 5-23. Printing T est Window 1. From the Select a Printer drop-down list, select a printer .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 5-28.
Spectrum24 Network Configuration Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 Mobile Companion . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-2 Spectrum24 Frequency Hopping (FH) Settings (1 and 2 MB Radios) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-30 Mobile Unit Tab . . . . . . . . . . . . . . . . . . . .
Spectrum24 Network Configur ation 6-3 Introduction Wireless LANs allow the mobile computers to communicate wirelessly and to send captu red data “real time” to a host device.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-4 Mobile Companion The Mobile Companion utility is used to configure the mob ile computer’ s wireless network settings. The Mobile Companion utility starts automatically an d appears as an icon on the task tray .
Spectrum24 Network Configur ation 6-5 When the menu opens, the user can select Status , WLAN Profiles, Find WLANs , or Options menu options. T able 6-1. Mobile Co mpanion Menu Descriptions Menu Item Description Status Displays the curren t status and i nformation f or the wirele ss connection .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-6 Finding WLANs A completed profile is a set of mobile c omputer c onfigurat ion settings that can be used in different locations to connect to a Spectru m24 network.
Spectrum24 Network Configur ation 6-7 2. T ap Connect . The Mode tab appears. Figure 6-3. Mode T ab T able 6-2. Mode T ab Fields Field Description Profile Name Populated with the name and (WLAN) ident ifier of the network connection. The Pr ofile Name: can bechange d.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-8 3. Select the Authentication tab to configure server-based authentication. Select one o f the following Authentication options from the Authentication drop-down list. • None - Default setting when authentication is not required on the network .
Spectrum24 Network Configur ation 6-9 T able 6-3. Authenticatio n T ab Fields - Kerberos Authentication Description Kerberos (see Figure 6-4 ) Kerberos is a different f orm of 128-bit data security .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-10 Figure 6-5. Mobile Companion - Authentication T ab (LEAP) T able 6-4. Authenticat ion T ab Fields - LEAP Authentication Description LEAP (see Figure 6-5 ) Select this opti on to enab le LEAP authenticatio n.
Spectrum24 Network Configur ation 6-11 Figure 6-6. Mobile Companion - Authentication T ab (EAP-TLS) T able 6-5. Authentication T a b Fields - EAP/TLS and PEAP Authentication Description EAP/TLS (see Figure 6-6 ) EAP/TLS is an authentication scheme through IEEE 802.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-12 Figure 6-7. Mobile Compani on - Authentication T ab (PEAP) T able 6-6. Authentication T ab Fields - EAP/TLS and PEAP Authentication Description PEAP (see Figure 6-7 ) Select this o ption to enab le PEAP authen tication.
Spectrum24 Network Configur ation 6-13 1. Select the Encryption tab to set the adapter profile security level by con figuring the encryption scheme and correspo nding keys. Select an option (Open System , WEP , Keyguard- MCM, TKIP (WP A)) from the Encryption drop-down list.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-14 T able 6-7. Encryption Options Encryption Description Open System Use the Open System o ption as th e default s etting when no data packet e ncryption i s needed over the n e twork.
Spectrum24 Network Configur ation 6-15 2. Select the IP Config tab to configure the following mobile computer profile network address parameters: IP address, subnet, gatew ay , DNS and WINS.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-16 • Select Static to manually as sign the IP , subnet mask, d efault gateway , DNS and WINS addresses used by the mobile comp uter profile. Figure 6-10. Mobile Companion - IP Config T ab (Static) T able 6-8.
Spectrum24 Network Configur ation 6-17 3. Select the Power tab to set the Radio T r ansmission Power level a nd the Power Savin g Modes for the mobile computer profile.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-18 4. T ap OK to implement power consumptio n changes for the mobile computer profile. Automatic Power Saving Mode Switches to Best Network Pe rformance when an AC power supply is dete cted.
Spectrum24 Network Configur ation 6-19 Status T o v iew the status of the wireless network co nnection, sele ct Status from the Mobile Companion menu. 1. Select the Signal tab to display a real-time graph of the signal quality of the mobile computer to the associated AP (Infrastructure Mode only).
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-20 2. Select the Info tab to view the mobile computer’ s curre nt software and driver revision data as well as the operating parameters of the current pr ofile.
Spectrum24 Network Configur ation 6-21 3. Select the IP Status tab to vie w the mobile computer’ s n etwork address inform ation. Unlike the IP Config tab in Find ing WLANs, the IP Status tab is view only with no user -config urable data fields. Figure 6-14.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-22 4. T ap Renew to refresh the informat ion displayed on the IP Status tab. The mobile device is releases the existing IP address and reque sts a new IP address from a DHCP server .
Spectrum24 Network Configur ation 6-23 10. Select the APs tab to view AP s with the same ESSID as the mobile computer’ s profile. Figure 6-16. Mobile Companion - APs T ab The associated AP displays a radio wave radiating from its antenna to indicate its associated status.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-24 Figure 6-17. Mobile Companion - Peers T ab Setting Options Select Options from the Mobile Co mpanion menu to: • Access APs or.
Spectrum24 Network Configur ation 6-25 2. Select the Access Ad-Hoc networks checkbox to display available peer (ada pter) networks and their signal strength within the A vailable WLAN Networks tab. The se are peers available to the mobile computer pr ofile for association.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-26 Changing Profiles Select WLAN Profiles from the Mobile Compan ion menu to view , connect to, create and edit a profile. A completed profile is a set of adapter configu ratio n settings that can be used in different locations to connect to a wireless network.
Spectrum24 Network Configur ation 6-27 Using LEAP for Wireless Network Security LEAP is a security protocol that provides authentic ation and encryption for wireless networks.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-28 A backslash is used and most setu ps do not require a domain name even if Microsoft Windows ® NT/2000 domains are used. 4. After changing the Spectrum2 4DS.reg file, copy the file onto the mobile comp uter into the Platform using ActiveSync and overwriting the ol d file.
Spectrum24 Network Configur ation 6-29 Prevent Password Cache T o preve nt password caching, edit the registry file using a text editor with the following changes: 1. Change th e LCachePwd va lue from 1 to 2: LCachePwd=dword:2 2. Ensure that the UNAME and UPwd lines are commented out by putting a semicolon at the beginning of each line.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-30 Spectrum24 Frequency Hopping (FH) Settings (1 and 2 MB Radios) Double-tap the S24 FH Settings icon on the Series 90 00 Demo window to open the Symbol Spectrum24 WLAN menu. Figure 6-21.
Spectrum24 Network Configur ation 6-31 Mobile Unit T ab Use the Mobile Unit tab to configure the mobile computer E SSID, power management, RTS thresho ld, International Roaming c apability and AP op tions. Figure 6-22. Mobile Unit T ab T able 6-14. Mobile Unit T ab Fields Field Description ESSID Use the ESSID field to set the 802.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-32 Mandatory BSS Use th e Mandatory BSS field to enter the IEEE MAC address o f the AP where the mob i le computer is r equired to ass ociate. The mobile computer ass ociates to onl y this AP when communicating on the ne twork.
Spectrum24 Network Configur ation 6-33 MicroAP T ab Use the MicroAP tab to configure the mobile computer to operate as an AP . The MicroAP establishes a single-cell wireless network for devices in mobile unit mode. Each MicroAP require s a unique ESSID.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-34 Encryption T ab Use the Encryption tab for configurin g encryption settings. The abse nce of a physical connection makes wireless links vulnerable to info rmation theft. Encryp tion is an efficient metho d of preventing data theft and improving data security .
Spectrum24 Network Configur ation 6-35 T able 6-16. Encryption T ab Fields Field Description MicroAP Authen tication Options A MicroAP can use Open System Algorithm, Shared Ke y Algorithm or both .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-36 WLAN Adapter T ab Use the WLAN Adapter tab to configure hardware and radio settings. Use the Card T ype: PCMCIA to specify the anten na type and the Radio Link Rate radio buttons to specify the da ta rate supported.
Spectrum24 Network Configur ation 6-37 Password Protecting NCP A NCP A has a passwo rd protection feature that can be turned on and off from the WLAN Adapter tab. When the NCP A p rogram is initially launch ed, the password is off (d efault). T o create a passwo rd for the NCP A advanced pag es: 1.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 6-38 Configuring the S24 DS (11 Mb ) Radio Using a Registry File Default settings for the Spectrum24 radio card can be set on the mob ile computer using registry (.reg) files. There are two re gistry files: Spectrum24DS.
Accessories Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-5 Cradles . . . . . . . . . . . . . . . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-2 Vehicle Cradle . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-14 Setup . . . . . . .
Accessories 7-3 AT Commands. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-51 Changing the Initialization String . . . . . . . . . . . . . . . . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-4.
Accessories 7-5 Introduction Series 9000 a ccessories provide a variety of p roduct support capab ilities. Accessories includ e cradles, keypads, Magnetic Stripe Rea der (MSR) and Cable Adapter Module (CAM) snap-ons, four slot spare battery cha rger , headphone.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-6 Snap-on Modules There are two snap on modules: • MSR snaps on to the mobile compute r and adds mags tripe read capabilities. • CAM snaps on to the mobile computer and is used to c onnect the cab les to the mobile computer .
Accessories 7-7 Keypads The mobile computer has interch angeable modular keypads . The modular keypads can be cha nged in the field as necessary to support sp ecialized applications. Do not remove the keypad while the mobile computer is on and do not operate the mobile computer with the keypad detached.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-8 3. Replace the keypad and re-atta ch using the two screws. Figure 7-2. Installing the Keypad Multi Media Card (MMC) The MMC provides secondary n on-volatile storage, however the flash m emory is slower than RAM.
Accessories 7-9 T o insert the MMC: 1. Suspend the mobile computer . 2. Remove the two keypad screws and slide the key pad down and lift off (see Figu re 7-1 on page 7-7 ). 3. Lift the MMC retaining door . 4. Position the MMC, with the contacts down, into the MMC holder .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-10 Single Slot Serial/USB Cradle This section describes how to set up and us e a CRD 9000-1000S Single Slot Se rial/USB Cradle with the MC9000-K and MC9000-S.
Accessories 7-11 Figure 7-5. MC9000-S S pare Battery Charging The Single Slot Serial/USB Cradle: • Provides 15VDC power fo r operating the mobile computer • Provides serial/USB ports for data communica tion between the mobile computer and a host computer or other serial device s (e.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-12 Setup The cradle requires a dedicate d port on the host computer . Figure 7-6. Single Slot Serial/ USB Cradle, Power/Serial/USB Connections Select either serial or USB fo r communications, do n ot connect cradle to both serial and USB ports.
Accessories 7-13 Battery Charging The the single slot serial/USB crad le can charge the mobile computer’ s main battery and a spare battery simultan eously . The mobile compu ter’ s amber charge LED, located in the Indicator LED Bar (see Figure 1-1 on pa ge 1-3 ), shows the mobile comput er battery charging status.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-14 V ehicle Cradle There are two versions of the VCD9000 V ehicle Cradle, one is used with the MC9000-K mobile computer and one is used with the MC9000-S mobile computer . Both of the VCD9000 V e hicle Cradles are functionally identical.
Accessories 7-15 Figure 7-8. VCD9000 V ehi cle Cradle - Back / Bottom BACK Mounting h oles Self-locking screws BOTTOM Serial port Power port.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-16 The vehicle’ s 12 V or 24 V electrical system powers t he cradle. The operating voltage range is 9 V to 32 V and requires a maximum cu rrent of 4A. Once inst alled into th e cab of the vehicle, the cradle hold s the mobile computer securely in place.
Accessories 7-17 Setup T able 7-2 lists the requirements for setting up and using the VCD9000. T able 7-2. VCD9000 Setup Requirements Feature Requirements Mounting (See p age 7-18 ) Four 8-32 X 1” lo ng screws with lock ing washers (provi ded as part of th e cradle).
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-18 Mounting T o moun t the V ehicle Cradle without using a mounting bracket or mounting device compa tible with the VCD9000: 1. Prepare the mounting surface to accept four 8-32 X 1” long self-locking screws, using a copy of the mounting template below .
Accessories 7-19 2. Remove the four self-locking screws fro m the back of the cradle. Figure 7-10. V ehicle Cradle - Back 3. Place the back of the cradle on the mo unting bracket or other mounting de vice/surface, with the four holes in the back of the cradle alig ned with the four holes in the mounting surface.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-20 Symbol recommends using #8 washers to protect the mounting surface. Figure 7-11. Sample Mounting Configuration Do not install the cradle on or ne ar an air bag cover plate or within an aerobic zone.
Accessories 7-21 T o conn ect the cradle to power: 1. Locate the vehicl e power sourc e. An accessory output in the vehicle’ s fuse panel is the ideal location for connecting the ve hicle cradle power input cable. The vehicle cradle shou ld be added to a circuit with a maximum load cap acity for the cradle and the original circuit.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-22 b. Splice the fuse holder to the end of the red V+ wire, as shown below . Make the distance from the fuse to the power connection point as short as possible. Figure 7-12. Connecti ng Power to Cradle 4.
Accessories 7-23 T o confirm th at the cradle has power , insert the mobile computer . The mobile computer battery charging LED blinks amber to indicate charging , then turns solid amber when the ba ttery is completely charged, see LED Indicators on page 7-27 for other indications.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-24 T o b egin communication: 1. Insert the mobile computer into the cradle. 2. Initiate communicatio n on the mobile computer , as determined by the application used.
Accessories 7-25 T o re move the mobile computer from the cradle, li ft the release button, then lift the mobile computer from the cradle. Figure 7-15. Removing the V ehicle Cradle Mobile Computer Battery Charging T o charg e the mobile computer battery: 1.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-26 Spare Battery Insertion and Removal T o ins ert a spare batte ry: 1. Insert the battery into the spare batte ry charging slot in the back of the cradle as shown. Figure 7-16. Insert ing the V ehicle Cradle 2.
Accessories 7-27 LED Indicators Care and Cleaning Avoid getting oils, grease, or gaso line on the cradle , and do not let d ebris gather in the bottom of the cradle slot. When necessary , clean the c radle with a mild cleaner . If necessary , contact Symbol for advice on whether to use a particular clean er .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-28 Four Slot Ethernet Cradle This section describes how to set up and use a Fo ur Slot Ethernet cradle. For cradle communication setup procedures , see Ethernet Setup on page 4-16 .
Accessories 7-29 The Four Slot Ethernet cradl e has the following attributes: • Provides 12VDC power fo r operating the mobile computer . • Enables data communication b etween the mobile computer (up to four) and a host computer , over an Ethernet n etwork (using a standard 10Base-T Ethernet ca ble).
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-30 Battery Charging Indicators The mobile computer’ s amber charge LED, locate d in the Indicator LED Bar , see Figure 1-1 o n page 1- 3 , shows the battery cha rging status. See T able 7-1 on page 7-13 for charging status indications .
Accessories 7-31 The Four Slot Charge Only Crad le has the following attributes: • Provides 12VDC power fo r operating the mobile computer . • Simultaneously charges up to four batteries in the mobile com puter .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-32 Four Slot Spare Battery Charger This section describes how to set up and use the Four Slot Spare Battery Charger to charge up to four MC9000-K or MC9000-S spare batterie s. Figure 7-21.
Accessories 7-33 Spare Battery Charging with the Four Slot Spare Battery Charger 1. Connect the charg er to a power sou rce. 2. For MC9000-K battery c harging , insert the battery into a sp are battery charging slot and gently press dow n on the battery to ensure proper cont act.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-34 Magnetic Stripe Reader This section describes how to set up and us e the snap-on MSR with the MC9000-K and the MC9000- S. The MSR snaps on to the mobile computer and can be removed easily when not in use.
Accessories 7-35 MSR and CAM Installation/Removal T o attach, sna p the MSR or the CAM onto the bottom of the mobile computer . Figure 7-23. MSR and CAM Installation T o remove , squeeze the latch grips and pu ll the MSR or the CAM from the mobile computer .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-36 Power Connection The MSR or CAM can a ccept power from either a standard AC plug or from a 12 VDC vehicle power source: 1. Select either the universal AC power supply or the 12VDC power cable.
Accessories 7-37 Serial/USB Connection The MSR can connect to and communicate with a serial/USB device, such as a printer or host computer , through its serial port. See CAM and MSR Comm unications Setup on page 7 -41 for the host computer communication setup procedu re.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-38 Magnetic Stripe Reading The MSR9000 application is designed to work with the MSR. This sample application illustrates how an application should handle MSR inputs. From the T est Applicatio ns window , double-tap the MSR9000 icon.
Accessories 7-39 4. Swipe the magnetic stripe card throu gh the reader , ensuring the ma gnetic stripe on the card is position ed as shown below . Figure 7-26.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-40 Cable Adapter Module This section describes how to set up and use the CAM. Both the CAM and the MSR attach to the mobile computer the same way , see Figure 7-23 on page 7-35 .
Accessories 7-41 The CAM: • Provides mobile computer’ s operating po wer and battery charging power when used with the Symbol approved power supply and cable. • Provides serial connection through the seri al pass-through port for communication with a serial device, such as a host computer .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-42 Universal Battery Charger (UBC) Adapter There are two UBC Adapters, one fo r the MC9000-K/G Batteries an d one for the MC9000 -S Batteries.
Accessories 7-43 2. Insert the battery in to the batte ry slot with the charging contacts facing down (over charging pins) and gently press down on the battery to ensure proper contac t. See T able 7-4 for the UBC Adapter LED indications. Figure 7-30.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-44 Figure 7-31. UBC Adapter LEDs T able 7-4. UBC Adapter Char ge LED Status Indications LED Indication Description POWER Green Power is conn ected to th e UBC Adapter . READY or Green Charging complete.
Accessories 7-45 Modem Module The MDM9000 Modem Module enables data commu nication between the MC9000 mobile computer and a host computer , remotely through the phone lines, and synchronizes information between the MC9000 and a host computer . This section describes how to setup and use the MDM9000 Modem Module.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-46 Setup Connecting to the Mobile Computer Figure 7-33. Modem Module Connection - Mobile Computer Do not connect the modem's 15-pin connector into a VGA port of a host computer .
Accessories 7-47 Connecting to the Single Slot Serial/USB Cradle Figure 7-34. Modem M odule Connection - Single Slot Serial/USB Cradle Do not connect the modem's 15-pin connector into a VGA port of a host computer . If using a phone, connect the cord from the phon e to the Phone port on the modem.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-48 3. In the Con nection window , doub le-tap Make Ne w Connection to create a connection. Figure 7-35. Networ k and Connections Windows 4. Enter a name for the connection on the Make New Connec tion window , then tap Next .
Accessories 7-49 6. In the Phone Number window , enter the phone number fo r the connection, then tap Finish . Figure 7-37. Phone Number Window Depending on the loca tion when dialing, additio nal numbers may need to be dialed (e.g., a 9 prefix is often required if dialing from work; a country code is needed if dialing internationally).
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-50 Figure 7-38. Dial-Up and Dial Properties Window Modem Country Setup The modem defaults to operation with US telep hone networks (country cod e: B5). T o operate the modem with other country telephone netwo rks, enter the Country of Installation command.
Accessories 7-51 A T Commands The A T Command Set allows you to custom-configure th e modem. Only experienced users having difficulty with default settings should use this. Changing the Initialization String T o enter A T commands: 1. On the MC9000, tap Settings - Control Panel .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-52 3. T o modify dial-u p properties, tap Dial Properties , make the selections in the Device Properties window . 4. T o edit the Dialing Pattern s , tap Edit . Figure 7-40. Dial-Up and Dial Properties Window 5.
Accessories 7-53 Basic A T Command Syntax A command line is made up of three elements: • Prefix - consists of the characters “A T” or “at” or , to repeat the execution of the prev ious command line, “A/” or “a/”. • Body - made up of individual commands described later .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-54 S<parameter_number>=[<value>] If the “=” is used, the new value to be stored in the S-parameter is specified in decimal following the “=”. If no value is given (i.
Accessories 7-55 ‘ Dial pause. (Modem paus es for a time specified b y S8 before dialing the digits f ollowing “,”) ; Return to command state . (Modem goes off hook and allows en tering additional A T commands . Use “H” to go back to on ho ok.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-56 V23C 1200 V32 9 600 or 4800 V32B 14400, 1200 0, 9600, 720 0 or 4800 V34 33600, 3120 0, 28800, 26400, 240 0, 21600, 19 200, 16800, 14400, 12000, 9600 , 7200, 4800 or 2400 %E Enable/Disable Line Quality Monitor and Auto-Retrain or Fall back/Fall forward.
Accessories 7-57 S5 Backspace Char acter 0-255 8 ASCII S6 Wait T ime before Blind Di aling or Dial T one 2-255 2 * S S7 Wait T ime for Carrier , Si lence or D ial T o ne 1-25 5 50 * S S8 Pa use T ime for Dial Delay Modifi er 0-255 2 * S S9 Carrier Detect Respon se Time 1-255 6 * 0 .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-58 Modem LED Indicators S38 Delay Befor e Forced Hangup 0-255 20 S S39 Flow Control Bit Mapped Options Status - 3 S40 General Bit Mapped Options Status - 104 (68h) * S41 General Bit Mapped Options Status - 195 (C3h) * S46 Data Compressi on Contro l - 138 * S48 V .
Accessories 7-59 W all Mounting Bracket and Shelf Slide This section describes how to install and set up the MC9000 Wall Mo unt Bracket and Shelf Slide to mount cradles to a wall.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-60 Attaching the Shelf Slide to the W all Mount Bracket One Single Slot Cradle/F our Slot Battery Charger T o a ttach the shelf slide to the wall mount bracket for use with one single slot cra dle or four slot battery charger: 1.
Accessories 7-61 Figure 7-45. Attaching T wo Shelf Slides Four Slot Cradle T o attach the shelf slide to the wall moun t bracket for use with a four slot cradle: 1. Place a slide on the left-h and bracket, alignin g the larger pan-head screw h oles in the slide with the left two screw holes on the bracket.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-62 Installing the Cradle/C harger on the Bracket Install the cradle or charger onto the bracket, inserting the brac ket’ s slide into the grooves on the bottom of the cradle/charger and sliding the cradle/charger into the desired position.
Accessories 7-63 Figure 7-48. Positio ning the Power Supply Power Supply.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 7-64.
Software Installation Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Symbol Windows CE SMDK . . . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 8-2.
Software Insta llation 8-3 Introduction The Symbol Windows CE SMDK for Series 9000 allows users to deve lop Windows CE applications for Series 9000 mobile computers. This SMDK co ntains libraries and other Symbol value-add software not available in the standard Microsoft ® Windows ® CE Platform SMDK.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 8-4 SMDK Components The SMDK installation program loads all of the SMDK, Series 9000 components onto the development computer . Onc e installe d, the SMDK allows users to cr eate applications and deploy the applications to mobile compu ters.
AirBEAM Smart Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-3 AirBEAM Package Builder . . . . . . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 9-2 Synchronizing with the Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10 Manual Synchronization . . . . . . . .
AirBEAM Smart 9-3 Introduction The AirBEAM Smart product a llows specially designed software packages to be transferred between a host server and Symbol wireless handheld device s. Before transfer , AirBEAM Smart checks and compares package version, so that only updated packages are loade d.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 9-4 AirBEAM Smart License The AirBEAM Smart Client is a licensed software product. The AirBEAM Smart Client's version synchronization func tionality is enabled through a licens e key file that is stored o n the client device.
AirBEAM Smart 9-5 Packages(1) T ab This tab is used to spec ify the package name of the first four o f eight packages that are to be loaded during the AirBEAM Smart syn chronization process. The specified package name must corres pond to a package that is available on the specified package server .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 9-6 Server T ab This tab is used to specify the configurati ons of the server to which the client connects during the package synchronization process. T able 9-3. Server T ab Field Description IP Address The IP Address of the serve r .
AirBEAM Smart 9-7 Misc(1) T ab This tab is used to configure various miscellaneous featu res. T able 9-4. Misc (1) T ab Field Description Auto-load T his drop-dow n list is used to specify how the AirBEAM Smar t Client is to be invoked automatically when the clie nt device is rebooted.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 9-8 Misc(2) T ab This tab is used to configure various miscellaneous featu res. TF TP This checkbox specifi es whether th e TF TP prot ocol is to be us ed to downl oad files. By defa ult, the AirBEAM Smart Client uses the F TP protocol.
AirBEAM Smart 9-9 Close Apps This check box specifies whether the A irBEAM Smart Client automatically attempts to clo se non-system app lications prior to resett ing the mobi le unit. If enabled the AirBEAM Smart Client sends a WM _CLOSE message to all non-system applications before resett ing the mobile unit.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 9-10 Misc(3) T ab This tab is used to configure various miscellaneous featu res. Synchronizing with the Server When the synchronizatio n process is initiated, the AirBEAM Smart Client at tempts to open an F TP session using the AirBEAM Smart Client configurat ion.
AirBEAM Smart 9-11 3. Once connected, the AirBEAM Synch ronize window appears. • The Status List displays status messages that indicate the progress of the synchronization proce ss. • T ap OK to return to the Main Menu . This button remains inactive until the synchronization process is complete.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 9-12.
Mobile Computer Configuration Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10-3 Starting Terminal Configuration Manager . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-2 Flash Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-27 FFS Partitions . . . .
Mobile Comp uter Configur ation 10-3 Introduction T erminal Configu ration Manager (TCM) is an application used to customize flash file system partitions for the mobile computer . The most common use is to create an applic ation partition hex file that contains the customer's application.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-4 Starting T erminal Configuration Manager Click the Windows start menu TCM icon ( Symbol Windows CE SMDK for Series 9000 ) to start TCM. The TCM window appears displaying two child win dows: Script1 and File Explorer .
Mobile Comp uter Configur ation 10-5 The following table lists the components of the TCM window . T able 10-1. TCM Components Icon Component Function Script Wind ow Di splays the file s to be used in the creati on of the p artition(s). File Explore r Window Us ed to select the files to be ad ded to the sc ript.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-6 Properties button View/change the current script pr operties. Build button Build the current script into a set of hex files. Check butto n Check th e script for errors (file s not found).
Mobile Comp uter Configur ation 10-7 Defining Script Properties Before a script is created, the script properties must be define d. This defines the type of terminal, flash type, number of disks being created and the memory configuratio n of each disk partition.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-8 8. Click the Options tab. The Script Properties window - Options tab appears. Figure 10-3. Script Proper ties Window - Options T ab 9. Set the paths for the Script File , Flash File and Hex File Build.
Mobile Comp uter Configur ation 10-9 Opening a New or Existing Script A script file can be created from scratch or based on an ex isting script file. Click Create to create a new script or click Open to open an existing script (for example, a scrip t provided in the Se ries 9000 SMDK).
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-10 Building the Image Once the script is created, the hex image defined by the script can be built. As part of the build, TCM perfo rms a check on the sc ript which verifies that all files referenc ed in the script exist.
Mobile Comp uter Configur ation 10-11 If one of the partitions being built is the E SSID, a prompt appears requesting the ESSID value. Deselect the HR (High Rate) check box when building ESSID images for a device with an FH radio.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-12 The mobile computer must be inserted in the cradle or attached to the CAM, both with their appropriate po wer supplies connected to a power so urce, for the mobile computer to reset into IPL.
Mobile Comp uter Configur ation 10-13 T able 10-2. IPL Menu Partitions Partition Name Description Platform Contains the files in t he Platform folder . Application Contain s the files in the Application folder . PRIMFIRM Contains the prima ry radio firmware for the Spe ctrum24 HR radio card.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-14 If the platform or application partition sizes are changed, a new partition table must be downloaded first. 5. IPL displays the Select T ransport menu which lists the av ailable methods of downloading the file.
Mobile Comp uter Configur ation 10-15 If the mobile comp uter does not have a radio, then the WirelessS24XX selection is not availa ble on the T ransport menu. 6. Use the up and down scroll buttons to select the method of transport, then press Enter .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-16 9. If the Wireless S24XX transport me thod was selected, the Address Configuration me nu appears. Figure 10-10. Addres s Configuration Menu For wireless downloads, the ESSID must b e loaded via serial before Wireless S24 DS can be used.
Mobile Comp uter Configur ation 10-17 11. The Download File? menu appears. Figure 10-11. Download File? Menu Download File? Download Cancel Show Parms Previous To p.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-18 12. Use the up and down scroll buttons to selec t Show Parms to verify the file to download. Press Enter to display the Parameters screen. Figure 10-12. Parameters Screen Partition Name is the name o f the partition selected in the Initial Progra m Loader menu.
Mobile Comp uter Configur ation 10-19 14. Use the up and down scroll buttons to select Download . Press Enter . The Downloading screen appears. Figure 10-13. Downloading Screen Before the download starts, if Serial was s elected in the Select T rans port menu, Wa i t in g fo r Data appears in the Device Status field.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-20 15. On the development compute r , click Load on the TCM too lbar . The Load T ermin al window - Serial tab appears. Figure 10-15. Load T erminal Wi ndow - Serial and Ethernet T abs 16.
Mobile Comp uter Configur ation 10-21 TCM Error Messages TCM validates the cells in the partitio n table when the Execute butto n is clicked. Cells highlighted in red contain an error . Partition loading is disabled until all errors are corrected. T able 10-3.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-22 One of the disk sizes is one sector in size In Script Prop erties window , one of the disks is too small (one sector in size). This may cause problem while building images, especia lly when cushion is enabled.
Mobile Comp uter Configur ation 10-23 IPL Error Detection While receiving data, IPL performs many chec ks on the data to ensure that the data is received correctly . If an error is detected, IPL immediately aborts the download, and repo rts the error on an error screen.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-24 Can't open the source -7 An error occurred open ing the sou rce device (e ither radio card or Serial port).
Mobile Comp uter Configur ation 10-25 Invalid data in HEX file -25 The Symbol HEX file being download ed contains invalid data. Ensure the file is in proper Symbol HEX file format with valid HEX d ata. Exceeded max size -26 The do wnload file is too large to fit into th e space allocated fo r it.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-26 Creating a Splash Screen The source bitmap files used to create the default splash s creens for the mobile c omputer are supplied with the Series 9000 SMDK.
Mobile Comp uter Configur ation 10-27 Flash Storage In addition to the RAM-based storage standard on Wi ndows CE te rminals, the mobile c omputer is also equipped with a non-volatile Flash-based storage area which can store data (p artitions) that can not be corrupted by a cold boot.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-28 RegMerge.dll RegMerge.dll is a built-in driver that allows registry edits to be made to the Wind ows CE Registry . Regmerge.dll runs very early in the boot process and l ooks for registry files (.
Mobile Comp uter Configur ation 10-29 CopyFiles Windows CE expects certain files to be in the Wi ndows folder , residing in volatile storage. Windows CE maintains the System Registry in volatile storage. CopyFile s copies files from one folder to another on a cold boot.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-30 8 bits per pixel only applies to splash screen ima ges. Once Windows CE is running, the color density is 16 bits per pixel.
Mobile Comp uter Configur ation 10-31 Partition images for selected partitions can be created by TCM. All partition images suitable for use by IPL are in hex file format for transfer by TCM from the dev elopment computer to the mobile computer .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 10-32.
Desktop Emulator Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-3 Software Requirements . . . . . . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 11-2 Using the Emulator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11-16 User Inputs . . . . . .
Desktop Emula tor 11-3 Introduction This chapter provides b asic instructions for instal ling and using the emulator . The emulator provides software API em ulation of th e actual MC9000 -K and MC9000-S.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 11-4 1. In the PDT9000 program group, do uble-click SSD.exe file. The Emulator System Settings window appears.
Desktop Emula tor 11-5 Figure 11-2. Emulator Startup Storage Settings 3. From the Emulator drop-down list, select either: PDT9000: Gemini53key for a full view of the mobile computer . or PDT9000: Gemini53keysplit for a split view o f the mobile computer .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 11-6 Figure 11-3. Emulator View Options 5. Select the Alwa ys on top check box to keep the emulator view on top of all othe r programs, or leave the box unchecke d to allow other progra ms to display on top of the emulator view .
Desktop Emula tor 11-7 Emulator Parameter Settings and Display s The Emulator System Setting s window is divided into three parts, emulator settings, emulator tabs and emulator LEDs.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 11-8 A detailed discussion of each of the emulator window tabs settings and displays is provided in the following sections: •E m u l a t o r •S t o r a g e • Scanner • Spectrum24 •B a t t e r y •S t a t u s .
Desktop Emula tor 11-9 Emulator T ab Use the Emulator ta b to set the emulator parameters , memory size, launch options and communications. Figure 11-5. Emulator T ab T able 11-2. Emulator T ab Functions Setting Description Memory Sets the memory size.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 11-10 Storage T ab The Emulator Storage settings simula te the storage environment that would be provide d by a flash file system and MMC. Whe n the emulator starts, the conten ts of these developmen t computer folders are copied to the emulator as separa te folders.
Desktop Emula tor 11-11 Scanner T ab Use the Scanner tab to allow the user to spec ify the type of simulated scanning provided by the emulator (the emulat or does not have a n integrated scann er).
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 11-12 Spectrum24 T ab Use the Spectrum24 tab to allow the user to modify the si mulated characteristics of the Spectrum24 interface. Both the simulated network card and the access point ESSID2MAC address es can be modified to simulate a specific network environment.
Desktop Emula tor 11-13 Battery T ab Use the Battery tab to setup th e power source to A/C or ba ttery . Battery profiles (life and discharge/ charge rate) can also be set. Battery status can be modified using the shell icon or using the Wind ows CE battery API calls.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 11-14 Status T ab The Status tab provides a visual indication o f backlight , contras t and LEDs. Intensities of backlight are indicated by the size of the backlight bar . The desktop emulator always displays the emulated terminal sc reen in color .
Desktop Emula tor 11-15 Figure 11-10. Emulator Status Indications T able 11-6. Status T ab Functions Setting Descripti on Display Backlight - Indica tes the BackLight setting . Contrast - In dicates the contrast setting. Key Light Indicates th e Key Light sett ing.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 11-16 Using the Emulator Once the Emulator has been launc hed and is running it functions like the actual termina l, see Starting the Emulator on page 11-3 . User Inputs The Emulator uses both the development comp uter mouse and the keypad for user inputs.
Desktop Emula tor 11-17 AC Power/Battery Status Icons AC Power/Battery Status icons are shown in the ta skbar to indicate present power supply status. They appear and function the sam e as in the mobile computer , see AC Power/Battery Status Icons on page 2-30 .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 11-18 Resetting the Emulator The emulator does not support a the reset function. Warm and cold boots cannot be performed on the emulator .
Maintenance and T roubleshooting Chapter Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12-3 Maintaining the Mobile Computer . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 12-2.
Maintenance a nd Troubleshooting 12-3 Introduction This chapter includes instructions on cleaning an d storing the mobile com puter and provides troubleshooting solutio ns for potential pr oblems during mobile computer operating.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 12-4 T roubleshooting T able 12-1. T roubleshooti ng the Mobile Computer Problem Cause Solution Mobile comput er does not turn on. Lithium-ion battery no t charged. Charge or re place the li thium-ion batt ery in the mobile computer .
Maintenance a nd Troubleshooting 12-5 Mobile comput er turns itse lf off. Mobile comput er is inacti ve. The mobile compu ter turns of f after a pe riod of inactivity. If the mobile computer is running on b attery power , this period can be set from 1 to 5 minute s, in one-minute inte rvals.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 12-6 If, after performing these checks, the mobile computer is still not reading symbols, contact the d istributor or Symbol T echnolog ies. The mobile computer does no t accept scan input.
Maintenance a nd Troubleshooting 12-7 Four Slot Char ge Only Cradle T able 12-2. T roublesh ooting the Four Slot Charge Only Cradle Problem Cause Solution Mobile computer charge indicator LE D does not l ight. Cradle is not receiving power . En sure the power supply is securely connect ed and receiving power .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 12-8 Four Slot Ethernet Cradle T able 12-3. T roubleshooting the Four Slot Ethernet Cradle Symptom Cause Solution Attempt by th e mobile computer to ActiveSy nc failed. Mobile comput er removed from the cradle while the LED was blinking gre en.
Maintenance a nd Troubleshooting 12-9 All Communicati on Status LED s are flashin g red. The unit cou ld not co nfigure itself, or it has lost th e lease on its IP address. Connect th e unit to an Ethernet ne twork with a correctly functionin g DHCP server .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 12-10 Four Slot Spare Battery Charger Single Slot Serial/USB Cradle T able 12-4. T roubleshooting The Four Slot Spare Battery Charger Symptom Possible Cause Action Batteries not charg ing.
Maintenance a nd Troubleshooting 12-11 Spare battery is n ot charging. Battery not fully seated in ch arging slot. Remove and re-inser t the spare battery into the cradle, ensuring it is firmly seated. Battery inserted in correctly . Ensure the cont acts are faci ng down and to ward the bac k of the cradle.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 12-12 Cable Adapter Module Magnetic Stripe Reader T able 12-6. T roubleshooti ng The Cable Adapter Module Symptom Possible Cause Action Mobile computer battery is not ch arging. Mobile co mputer was removed from CAM or CA M was unplugged from AC power too soon.
Maintenance a nd Troubleshooting 12-13 Mobile computer battery is not ch arging. Mobile computer was removed from MSR or MSR was unplugged from AC power too soon. Ensure MSR is r eceiving po wer . Ens ure mobile comp uter is attached correct ly . Confirm main battery is char ging under Start - Settings - System - Power .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 12-14 MDM9000 Modem Module T able 12-8. T roubleshooting the MDM9000 Modem Module Symptom Possible Cause Action Mobile comput er is not communicating t hrough the modem. The modem cabl e is not fully connected.
Maintenance a nd Troubleshooting 12-15 Dial-out fails Location setting is incorrect. V erify Di aling Locations. V erify Dialing Patterns are correct for the current location .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide 12-16 VCD9000 V ehicle Cradle T able 12-9. T roubleshooting the VCD9000 V ehicle Cradle Symptom Possible Cause Action Mobile computer battery ch arging LED does not lig ht. Cradle is not receiving power .
T echnical Specifications Appendix Contents Mobile Computer Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . A-3 MDM9000 Modem Module Technical Specifications . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide A-2.
Technical Specifications A-3 Mobile Computer T echnical Specifications The following table s ummarizes the mobile c omputer’ s intende d operating env ironment.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide A-4 Interface RS-232, max. 115.2 kbps min. 1200bps, US B MMC Card Slot T ype II Keypad Opti ons MC9000-K: 53-key standard Optional K.
Technical Specifications A-5 MDM9000 Modem Module T echnical Specifications T able A-2. MDM9000 Modem Module T echnical Specifications Asynchronous character format Up to 10 bits, incl uding data, sta.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide A-6.
Technical Specifications A-7 Mobile Computer Pin-Outs Figure A-1. Pin Locations T able A-3. MC9000-K and MC9000-S, Pin-Outs PIN Number Signal Name Function 1 USB_GND USB 2 USB_D_PLUS USB 3 TXD RS232C 4 RXD RS232C 5 DCD RS232C 6 RTS RS232C 7 DSR RS232C 8 GND Ground , 2.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide A-8 Accessory CAM and MSR Pin-Outs Figure A-2. CAM and MSR Serial Connector T able A-4.
Keypad Maps Appendix Contents Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .B-3 Keypads . . . . . . . . . . . . . . . . . . . . . . .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-2.
Keypad Maps B-3 Introduction This appendix contains the k eypad maps for the keypad con figurations. Each key is listed in the table with its value, depending on the sta te of the keypad.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-4.
Keypad Maps B-5 28-Key Keypad (MC9000-K) The 28-key keypa d contains a Power bu tton, application keys, sc roll keys and a function key . See T able B-3 for key functions an d T a ble B-4 for the keypad mappings. The mapp ing functions include: • 28-key functions • 28-key c haracter ma p.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-6 T able B-1. MC9000-K : 28-Key Functions Local Function Key Sequence Display Backlight On/Off <Func><#> Keypad Backli.
Keypad Maps B-7 T able B-2. MC9000-K: 28 Key Keypad Mapping Key Default State Alpha State (1 T ap) Alpha State (2 T aps) Alpha State (3 T aps) Alpha State (4 T aps) Shift Alpha State (1 T ap) Shift Al.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-8 25 0 5 0 a6 5 9 7 b6 6 9 8 c6 7 9 9 A 160+65 65 B 160+66 66 C 160+67 67 T able B-2.
Keypad Maps B-9 35 1 5 1 d6 8 1 0 0 e6 9 1 0 1 f7 0 1 0 2 D 160+68 68 E 160+69 69 F 160+70 70 * * T able B-2. MC9000-K: 28 Ke y Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-10 45 2 5 2 g7 1 1 0 3 h7 2 1 0 4 i7 3 1 0 5 G 160+71 71 H 160+72 72 I 160+73 73 * * T able B-2.
Keypad Maps B-11 55 3 5 3 j7 4 1 0 6 k7 5 1 0 7 l7 6 1 0 8 J 160+74 74 K 160+75 75 L 160+76 76 55 3 5 3 =1 8 7 6 1 + 160 +187 43 T able B-2. MC9000-K: 28 Ke y Keypad Mapping (Continued) Key Default St.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-12 65 4 5 4 m7 7 1 0 9 n7 8 1 1 0 o7 9 1 1 1 M 160+77 77 N 160+78 78 O 160+79 79 * * T able B-2.
Keypad Maps B-13 75 5 5 5 p8 0 1 1 2 q8 1 1 1 3 r8 2 1 1 4 s8 3 1 1 5 P 160+80 80 Q 160+81 81 R 160+82 82 S 160+83 83 +1 0 7 4 3 + 160 +107 43 T able B-2.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-14 85 6 5 6 t8 4 1 1 6 u8 5 1 1 7 v8 6 1 1 8 T 160+84 84 U 160+85 85 V 160+86 86 - 189 45 - 160+189 45 T able B-2.
Keypad Maps B-15 95 7 5 7 w8 7 1 1 9 x8 8 1 2 0 y8 9 1 2 1 z9 0 1 2 2 W 160+87 87 X 160+88 88 Y 160+89 89 Z 160+90 90 /1 9 1 4 7 / 160+191 47 T able B-2.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-16 . 190 46 * 106 42 * 160 +106 42 T able B-2. MC9000-K: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) .
Keypad Maps B-17 04 8 4 8 Space 32 32 * * T able B-2. MC9000-K: 28 Ke y Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T aps) Alpha State (3 T aps) Alpha State (4 T a.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-18 # 160+51 35 * * T able B-2. MC9000-K: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T.
Keypad Maps B-19 Space 32 32 T able B-2. MC9000-K: 28 Ke y Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T aps) Alpha State (3 T aps) Alpha State (4 T aps) Shift Alp.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-20 BKSP 8 8 T able B-2. MC9000-K: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T aps) A.
Keypad Maps B-21 Up 38 - T able B-2. MC9000-K: 28 Ke y Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T aps) Alpha State (3 T aps) Alpha State (4 T aps) Shift Alpha S.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-22 Down 40 - T able B-2. MC9000-K: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T aps) .
Keypad Maps B-23 Right 39 - T able B-2. MC9000-K: 28 Ke y Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T aps) Alpha State (3 T aps) Alpha State (4 T aps) Shift Alph.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-24 Left 37 - T able B-2. MC9000-K: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T aps) .
Keypad Maps B-25 43-Key Keypad (MC9000-K) The 43-key keypa d contains a Power bu tton, application keys, sc roll keys and a function key . See T able B-3 for key functions an d T a ble B-4 for the keypad mappings. The mapp ing functions include: • 43-key functions • 43-key c haracter ma p.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-26 T able B-3. MC9000-K : 43-Key Functions Local Function Key Sequence Display Backlight On/Off Keypad Backlight On/Off Contrast +.
Keypad Maps B-27 T able B-4. MC9000- K: 43 Keypad Mapping Key Default (Numlock) State Alpha State Shift AlphaState Func State Shift- Func State VK Code (Decimal) ASCII V alue (Decimal) 14 9 4 9 u8 5 1.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-28 55 3 5 3 s8 3 1 1 5 S 160+83 83 s8 3 1 1 5 S 160+83 83 65 4 5 4 t8 4 1 1 6 T 160 +84 84 t8 4 1 1 6 T 160+84 84 75 5 5 5 o7 9 1 1 1 O 160+79 7 9 o7 9 1 1 1 O 160+79 79 85 6 5 6 p8 0 1 1 2 P 160 +80 80 p8 0 1 1 2 P 160+80 80 T able B-4.
Keypad Maps B-29 95 7 5 7 q8 1 1 1 3 Q 160+81 81 q8 1 1 1 3 Q 1 60+81 81 04 9 4 9 y8 9 1 2 1 Y 160+89 89 y8 9 1 2 1 Y 1 60+89 89 F1 a6 5 9 7 A 160+65 65 * * F2 b6 6 9 8 B 160+66 66 b6 6 9 8 B 1 60+66 66 T able B-4.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-30 F3 c6 7 9 9 C 160+67 67 c6 7 9 9 C 160+67 67 F4 d6 8 1 0 0 D 160+68 6 8 * * F5 e6 9 1 0 1 E 160 +69 69 * * T able B-4.
Keypad Maps B-31 F6 f7 0 1 0 2 F 160+70 70 f7 0 1 0 2 F 1 60+70 70 F7 g7 1 1 0 3 G 160+71 71 g7 1 1 0 3 G 1 60+71 71 F8 h7 2 1 0 4 H 160+72 72 h7 2 1 0 4 H 1 60+72 72 F9 i7 3 1 0 5 I 160+73 73 + 107 43 + 1 60+107 43 T able B-4.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-32 F10 j7 4 1 0 6 J 160 +74 74 -1 8 9 4 5 - 160+189 45 F11 k7 5 1 0 7 K 160+75 75 *1 0 6 4 2 * 160+106 42 F12 l7 6 1 0 8 L 160+76 76 /1 9 1 4 7 ? 160+191 63 * m7 7 1 0 9 M 160+77 77 m7 7 1 0 9 M 160+77 77 T able B-4.
Keypad Maps B-33 * n7 8 1 1 0 N 160+78 78 n7 8 1 1 0 N 160+78 78 Space 32 32 Space 32 32 Space 160+32 32 BKSP 8 8 BKSP 8 8 BKSP 160+8 8 BKSP 8 8 UP 38 - T able B-4.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-34 Down 40 - Right 39 - Left 37 - .1 9 0 4 6 x8 8 1 2 0 X 160+88 88 x8 8 1 2 0 X 160+88 88 T able B-4.
Keypad Maps B-35 * 106 42 z9 0 1 2 2 Z 160+90 90 z9 0 1 2 2 Z 1 60+90 90 T able B-4. MC9000-K: 43 Keypad Mapping (Continued) Key Default (Numlock) State Alpha State Shift AlphaState Func State Shift- Func State VK Code (Decimal) ASCII V alue (Decimal) * See T able 2-7 on page 2-2 3 for keypad sp ecial functi ons.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-36 53-Key Keypad (MC9000-K) There are two physical configurations of the 53-k ey keypad, however both of the keypads are functionally identical. The 53-key keypad con tains a Power button, application keys, scroll keys and function keys.
Keypad Maps B-37 T able B-5. MC9000-K: 53 Key Functions Local Function Key Sequence Display Backlight On/ Off <Func><Z > Keypad Backlight On/Of f <Func><X> Contrast + <Func><D> Contrast - <Func><I> V olume + <Func><H> V olume - <Func><M> T able B-6.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-38 45 2 5 2 $ 160+52 103 F4 115 - F4 160+115 - 55 3 5 3 % 160+53 106 F5 116 - F5 160+116 - 65 4 5 4 ^ 160+54 94 F6 117 - F6 160+117 - 75 5 5 5 & 160+55 112 F7 118 - F7 160+118 - 85 6 5 6 * 160+56 42 F8 119 - F8 160+119 - 95 7 5 7 ( 160+57 41 F9 120 - F9 160+120 - T able B-6.
Keypad Maps B-39 04 8 4 8 ) 160+48 40 F10 1 21 - F10 160+121 - UP 38 - Down 40 - Right 39 - Left 37 - T able B-6. MC9000-K: 53-Key Mapping (Continued) Key Default State Sh ift State Func State Shift-Func State VK Code (Decimal) ASCII V alue (Decimal) * See T able 2-7 on page 2-2 3 for keypad sp ecial functi ons.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-40 ENTER 13 13 a6 5 9 7 A 160+65 65 ,1 8 8 4 4 < 160 +188 60 b6 6 9 8 B6 6 6 6 .1 9 0 4 6 > 160 +190 60 c6 7 9 9 C 160+67 67 ‘2 2 2 3 9 “ 1 60+222 34 b6 8 1 0 0 D 160+68 68 * * T able B-6.
Keypad Maps B-41 e6 9 1 0 1 E 160+69 69 [2 1 9 9 1 { 160+219 123 f7 0 1 0 2 F 160+70 70 ]2 2 1 9 3 } 160+221 125 g7 1 1 0 3 G 160+71 71 2 2 0 9 2 | 160+2 20 124 h7 2 1 0 4 H 160+72 72 * * T able B-6.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-42 i7 3 1 0 5 I 160+73 73 * * j7 4 1 0 6 J 160+74 74 ‘1 9 2 9 6 ~ 160 +192 126 k7 5 1 0 7 K 160+75 75 k7 5 1 0 7 K 160 +75 75 l7 6 1 0 8 L 160+76 76 /1 9 1 4 7 ? 1 60+191 63 T able B-6.
Keypad Maps B-43 m7 7 1 0 9 M 160+77 77 * * n7 8 1 1 0 N 160+78 78 -1 8 9 4 5 _ 160 +189 95 o7 9 1 1 1 O 160+79 79 o7 9 1 1 1 O 160+79 79 p8 0 1 1 2 P 160+80 80 p8 0 1 1 2 P 160 +80 80 q8 1 1 1 3 Q 160+81 81 q8 1 1 1 3 Q 160+81 81 T able B-6.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-44 r8 2 1 1 4 R 160+82 82 ;1 8 6 5 9 : 160+1 86 58 s8 3 1 1 5 S 160+83 83 +1 8 7 4 3 + 160 +187 43 t8 4 1 1 6 T 160+84 84 -1 0 9 4.
Keypad Maps B-45 x8 8 1 2 0 X 160+88 88 * * y8 9 1 2 1 Y 160+89 89 y8 9 1 2 1 Y 160 +89 89 z9 0 1 2 2 Z9 0 9 0 * * T able B-6. MC9000-K: 53-Key Mapping (Continued) Key Default State Sh ift State Func State Shift-Func State VK Code (Decimal) ASCII V alue (Decimal) * See T able 2-7 on page 2-2 3 for keypad sp ecial functi ons.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-46 3270 Emulator The 3270 emulator keypad contains a Po wer button, application keys , scroll keys and a function key . The 3270 emulator keypad uses the 53-key mapping when not in the emulator mode, see T able B-6 for descriptions for the 53-key mapp ings.
Keypad Maps B-47 T able B-7. 3270 Key Functions Local Function Key Sequence Program Inf ormation <Func><Ctrl> <P> Diagnostics < Func><Ctrl><D> Keyclicks On/Off <.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-48 T able B-8. 3270 Emulation Key s 3270 Key Key Sequence Attention <Ctrl> < G> Backspace <BKSP> Back T ab <C.
Keypad Maps B-49 F4 <Func><4> F5 <Func><5> F6 <Func><6> F7 <Func><7> F8 <Func><8> F9 <Func><9> F10 <Func><0> F11 <.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-50 T able B-9. 3270 Character Map Char Key Sequence Space <space> ! <Ctrl><5 > " <Shift><Func>&.
Keypad Maps B-51 : <Shift><Func><R> ; <Func><R> < <Shift>< Func><A> = <Func><W > > <Shift>< Func><B> ? <Func>&.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-52 U <Shift><U> V <Shift><V> W <Shift><W> X <Shift><X> Y <Shift><Y> Z .
Keypad Maps B-53 p <P> q <Q> r <R> s <S> t <T> u <U> v <V> w <W> x <X> y <Y> z <Z> { <Shift><Func ><E> | <Shift>< Func><G> } <Shift>< Func><F> ~ <Shift>< Func><J> T able B-9.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-54 5250 Emulator The 5250 emulator keypad contains a Po wer button, application keys , scroll keys and a function key . The 5250 emulator keypad uses the 53-key mapping when not in the emulator mode, see T able B-6 for descriptions for the 53-key mapp ings.
Keypad Maps B-55 T able B-10. 5250 Key Functions Local Function Key Sequence Program Inf ormation <Func><Ctrl> <P> Diagnostics < Func><Ctrl><D> Keyclicks On/Off <.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-56 T able B-11. 5250 Emulation Key s 5250 Key Key Sequence Attention < Ctrl><G> Backspace <BKSP> Back T ab <F.
Keypad Maps B-57 F4 <Func><4> F5 <Func><5> F6 <Func><6> F7 <Func><7> F8 <Func><8> F9 <Func><9> F10 <Func><0> F11 <.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-58 T able B-12. 5250 Character Map Char Key Sequence Space <space> ! <Ctrl><5 > " <Shift><Func>.
Keypad Maps B-59 : <Shift><Func><R> ; <Func><R> < <Shift>< Func><A> = <Func><W > > <Shift>< Func><B> ? <Func>&.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-60 U <Shift><U> V <Shift><V> W <Shift><W> X <Shift><X> Y <Shift><Y> Z .
Keypad Maps B-61 p <P> q <Q> r <R> s <S> t <T> u <U> v <V> w <W> x <X> y <Y> z <Z> { <Shift><Func ><E> | <Shift>< Func><G> } <Shift>< Func><F> ~ <Shift>< Func><J> T able B-12.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-62 VT Emulator Keypad The VT Emulator keypad contains a Power button, applica tion keys, scroll keys and a function key . The VT emulator keypad uses the 53-key mapping when not in the emu lator mode, see T able B-6 for descriptions for the 53-key mappings.
Keypad Maps B-63 T able B-13. VT T erminal Functions VT Function Key Sequence Program Infor mation <Func><Ctrl ><P> Diagnostics <Fu nc><Ctrl><D> Keyclicks On/Off &l.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-64 T able B-14. VT -100 Emulation Key s VT -100 Key Key Sequence Return <R eturn> Backspace <BKSP> T ab <Func>&l.
Keypad Maps B-65 T able B-15. VT -220 Emulation Key s VT -220 Key Key Sequence Return <Return > Backspace <BKSP> T ab <Fun c><*> Up Arrow <Up Arrow> Left Arrow <Left A.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-66 F18 <Shift><8> F19 <Shift><9> F20 <Shift><0> Enter <Return> Backspace(Delete) <Ctrl><BKSP> Backtab <Func><.
Keypad Maps B-67 T able B-16. VT/HP Character Map Char Key Sequence ^@ ^A <Ctrl><A> ^B <Ctrl>< B> ^C <Ctrl>< C> ^D <Ctrl><D> ^E <Ctrl>< E> ^.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-68 ^Z <Ctr l><Z> ESC <ESC> ^ <Ctrl><1> ^] <Ctrl><2> ^^ <Ctr l><3> ^_ <Ctr.
Keypad Maps B-69 5 <5> 6 <6> 7 <7> 8 <8> 9 <9> : <Func><P> ; <Func><R> < <Func><K> = <Func><W> > <Func><L&g.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-70 P <Shift>< P> Q <Shift><Q> R <Shift>< R> S <Shift>< S> T <Shift>< T>.
Keypad Maps B-71 k <K> l <L> m <M> n <N> o <O> p <P> q <Q> r <R> s <S> t <T> u <U> v <V> w <W> x <X> y <Y> z &.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-72 28-Key Keypad (MC9000-S) The 28-key keypad contains a Powe r button, application keys, scroll keys and a function key . See T able B-3 fo r key functions and T able B-4 for the keypad mappings.
Keypad Maps B-73 T able B-17. MC9000-S : 28-Key Functions Local Function Key Sequence Display Backlight On/Of f <Func><# > Keypad Backlight On/Of f <Func><0> Contrast + <Fun.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-74 T able B-18. MC9000-S: 28 Key Keypad Mapping Key Default State Alpha State (1 T ap) Alpha State (2 T aps) Alpha State (3 T aps).
Keypad Maps B-75 25 0 5 0 a6 5 9 7 b6 6 9 8 c6 7 9 9 A 160+65 65 B 160+66 66 C 160+67 67 T able B-18. MC9000-S: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-76 35 1 5 1 d6 8 1 0 0 e6 9 1 0 1 f7 0 1 0 2 D 160+68 68 E 160+69 69 F 160+70 7 0 * * T able B-18.
Keypad Maps B-77 45 2 5 2 g7 1 1 0 3 h7 2 1 0 4 i7 3 1 0 5 G 160+71 71 H 160+72 72 I 160+73 73 * * T able B-18. MC9000-S: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-78 55 3 5 3 j7 4 1 0 6 k7 5 1 0 7 l7 6 1 0 8 J 160+74 74 K 160+75 75 L 160+76 7 6 55 3 5 3 =1 8 7 6 1 + 160+187 43 T able B-18.
Keypad Maps B-79 65 4 5 4 m7 7 1 0 9 n7 8 1 1 0 o7 9 1 1 1 M 160+77 77 N 160+78 78 O 160+79 79 * * T able B-18. MC9000-S: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-80 75 5 5 5 p8 0 1 1 2 q8 1 1 1 3 r8 2 1 1 4 s8 3 1 1 5 P 160+80 80 Q 160+81 81 R 160+82 8 2 S 1 60+83 83 +1 0 7 4 3 + 160+107 43 T able B-18.
Keypad Maps B-81 85 6 5 6 t8 4 1 1 6 u8 5 1 1 7 v8 6 1 1 8 T 160+84 84 U 160+85 85 V 160+86 86 - 189 45 - 160+189 45 T able B-18. MC9000-S: 28 Key Keypad Mapping (Continued) Key Default State Alpha St.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-82 95 7 5 7 w8 7 1 1 9 x8 8 1 2 0 y8 9 1 2 1 z9 0 1 2 2 W 160+87 87 X 160+88 88 Y 160+89 8 9 Z 160 +90 90 /1 9 1 4 7 / 160+1 91 47 T able B-18.
Keypad Maps B-83 . 190 46 * 106 42 * 160 +106 42 T able B-18. MC9000-S: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T aps) Alpha State (3 T aps) Alpha State.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-84 04 8 4 8 Space 32 32 * * T able B-18. MC9000-S: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha .
Keypad Maps B-85 # 160+51 35 * * T able B-18. MC9000-S: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T aps) Alpha State (3 T aps) Alpha State (4 T aps) Shift.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-86 Space 32 32 T able B-18. MC9000-S: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T ap.
Keypad Maps B-87 BKSP 8 8 T able B-18. MC9000-S: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T aps) Alpha State (3 T aps) Alpha State (4 T aps) Shift Alpha .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-88 Up 38 - T able B-18. MC9000-S: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T aps) A.
Keypad Maps B-89 Down 40 - T able B-18. MC9000-S: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T aps) Alpha State (3 T aps) Alpha State (4 T aps) Shift Alpha.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-90 Right 39 - T able B-18. MC9000-S: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T aps.
Keypad Maps B-91 Left 37 - T able B-18. MC9000-S: 28 Key Keypad Mapping (Continued) Key Default State Alpha State (1 T ap) Alpha State (2 T aps) Alpha State (3 T aps) Alpha State (4 T aps) Shift Alpha.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide B-92.
Glossary 802.11/8 02.11b A radi o protocol th at may be used b y the Symbol Spectrum24 ra dio card. Sy mbol radio card s that use th e 802.11 protocol also have an ESS_ID. ACK/NAK ACK/NA K is the defau lt software handshaking. Access Point Access Point (AP) refers to Symbol’ s Spectrum24 Ethernet Access Point .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide GL-2 AirBEAM ® Manager AirBEAM ® Manager is a comprehensive wireless n e twork management sy stem that provides e ssential functi .
Glossary GL-3 ASCII American Standard Cod e for Information In terchange. A 7 bit-plus-p arity code repres enting 128 lett ers, numerals, punctuation marks and cont rol characters. It is a standard data transmission code in the U.S. Autodiscrimination The ability of an int erface controller to determine the code type of a scanned bar code.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide GL-4 Bit Binary digit. One bit is the basi c un it of binary informatio n. Generally , eight consecutive bits compose one byt e of data. The pattern of 0 and 1 values within the byte dete rmines its meaning.
Glossary GL-5 Character Set Those characters a vailable for encoding in a particular bar code symbology . Check Digit A digit u sed to verif y a correct symbol decode. Th e scanner inserts the de coded data into an arith metic formula and checks that the resulting nu mber matches the encoded check digit.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide GL-6 Data Communications Equipment (DCE) A device (suc h as a modem) whi ch is designed to attach directly to a DTE (Data T erminal Equipment) device. DCE See Data Communications Equipment .
Glossary GL-7 Discrete 2 of 5 A binary bar code symbolog y representing ea ch character by a group o f five bars, two of which are wi de. The locat ion of wide bars in the gr oup determines which character is encoded; spaces are insignificant. Only numeric characters (0 to 9) and START/STOP characters may be encoded.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide GL-8 ESS_ID Extended Service Se t Identifier , defines the covera ge area. Prior to the release of the 802.11 specification the ESS_ID was called the Net_ID or Network Identifier . For terminals using Spectrum24 radios with th e 802.
Glossary GL-9 Hard Reset See Cold Boot . Hopping Sequence A set of ra ndom frequencies designed to minimize interfer ence with other sets of ra ndom frequenc ies. A hopping seque nce determines th e pattern with wh ich a station that uses frequency hopping changes its communications frequen cy .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide GL-10 Intercharacter Gap The space betw een two adja cent bar code characte rs in a discrete code. Interleaved Bar Code A bar co de in which characters are paired together , using bars to represent the first characte r and the intervening spaces to r epresent the second.
Glossary GL-11 Kerberos Kerberos is a network auth entication protocol. It i s designed to provide strong auth enticatio n for client /server application s by using secret-k ey cryptography. A free implementation of this pr otocol is available from the Massachuset ts Institute of T echno logy .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide GL-12 MC Mobile Computer . MIL 1 mil = 1 thousandth of a n inch. Misread (Misdecode) A condition whi ch occurs when th e data output of a reader or interface cont roller does not agree with the data encoded within a bar code symbo l.
Glossary GL-13 Open Data-Link Interface (ODI) Novell’ s driv er specifi cation for an interface between network ha rdware and h igher-level protocols.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide GL-14 Programming Mode Th e state in which a scanner is configured for parameter values. See Scanning Mode . Quiet Zone A clear spac e, containing n o dark marks , which preced es the start character of a bar cod e symbol and follows the stop character .
Glossary GL-15 Scanning Mode The scann er is energized, progr ammed and ready to read a bar code. Scanning Sequence A method of pro gramming or config uring para meters for a bar code reading syst e m by scanning bar code menu s.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide GL-16 STEP Symbol T erminal Enabler Program. Subnet A subset of nodes on a ne twork that ar e serviced by the same router . See Router . Subnet Mask A 32-bit number used to separ ate the ne twork and host sections of an IP ad dress.
Glossary GL-17 TCP/IP (T ransmission Control Protocol/Int ernet Protocol) A communications protocol used to internetwork dissimilar systems. This standard is the protocol of the Int ernet and has become t he global stan dard for commu nications.
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide GL-18 T rivial File T ransfer Protocol See TF TP . TSR See T erminate and Stay Resident . UPC Universal Product Code. A re latively complex numeric symbology . Each character consists of two bars and two spaces, each of which is any of four width s .
Glossary GL-19 WNMP (Wireless Network Man agement Protocol) This is Symbo l’ s proprietar y MAC layer protocol used fo r inter access poin t communication and othe r MAC layer communicatio n. WNMS (was renamed to AirBEAM ® Manager) See AirBEAM ® Manager .
MC9000-K/S for Embedded Windows® CE .NE T Product Referenc e Guide GL-20.
Index-1 Numerics 128-bit sha red key . . . . . . . . . . . . . . . . . . . . . . . . . 4-30 2-D bar codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-37 40-bit shared key . . . . . . . . . . . . . . . . . . . . . . . . . . 4-30 A AC power .
MC9000-K/S for Embedded Win dows® CE .NET Pr oduct Ref erence Guide IN-2 serial connection . . . . . . . . 7-34, 7-37, 7-41 multi media card . . . . . . . . . . . . . . . . . . . . 1-7, 7-5 printer cable . . . . . . . . . . . . . . . . . . . . . . . 1 -7, 7-6 serial/USB cradle .
Index IN-3 CAM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7, 7-6, 7-40 USB connection . . . . . . . . . . . . . . . . . . 7-34, 7-41 certificates . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6, 3-15 changing profiles . . . .
MC9000-K/S for Embedded Win dows® CE .NET Pr oduct Ref erence Guide IN-4 copyfile . . . . . . . . . . . . . . . . . . . . . . . . .10-29 regmerge . . . . . . . . . . . . . . . . . . . . . . .10-28 flash storage . . . . . . . . . . . . . . . . . . . .
Index IN-5 mobile computer cold boot . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-28 mode 802.11 ESSID . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 ad-hoc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 country .
MC9000-K/S for Embedded Win dows® CE .NET Pr oduct Ref erence Guide IN-6 remove battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1-10 removing programs . . . . . . . . . . . . . . . . . . . . . . . . . .3-7 reset hard . . . . . . . . .
Index IN-7 termina l cold boot . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-17 customizing . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5 hard reset . . . . . . . . . . . . . . . . . . . . . . . 2-39, 2-40 power on . . . . . . .
MC9000-K/S for Embedded Win dows® CE .NET Pr oduct Ref erence Guide IN-8.
Thank you for your input—We value your comments. Tell Us What You Think... We ’d like to know what you th ink about this Manual. Please take a moment to fill out this questionnaire and fax this form to: (631) 738-3318, or mail to: Symbol T echnologies, Inc.
.
.
72-65262-03 Revision A — June 2004.
デバイスSymbol MC9000-Kの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Symbol MC9000-Kをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはSymbol MC9000-Kの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Symbol MC9000-Kの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Symbol MC9000-Kで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Symbol MC9000-Kを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はSymbol MC9000-Kの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Symbol MC9000-Kに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちSymbol MC9000-Kデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
