TeacメーカーMicro Hi-Fi Systemの使用説明書/サービス説明書
ページ先へ移動 of 16
Z This appliance has a serial number located on the rear panel. Please record the model number and serial number and retain them for your records. Model number Serial number TEAC CORPORATION 3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan Phone: (0422) 52-5081 TEAC AMERICA, INC.
31 Specifications AMPLIFIER section Output Power (L+R) . . . . . . . . . . . . . . . . . . . . . . . 5 W + 5 W Output Power (Subwoofer) . . . . . . . . . . . . . . . . . . . . . . 15 W Input Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . .
30 If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling your dealer or TEAC service center. General No power e Check the connection to the AC power supply. Check and make sure the AC source is not a switched outlet and that, if it is, the switch is turned on.
29 Press the SKIP button ( . / / ) to select a source (TUNER, CD or iPod), and then press the TIMER button. 6 Press the SKIP button ( . / / ) to set the volume, and then press the TIMER button. 7 The clock and the TIMER indicator are displayed. The unit will turn on and off at the specified time every day.
28 Setting the Timer < The unit can be programmed to turn on and off at a specified time. < Adjust the clock before setting the timer. Press and hold the TIMER button until the TIMER indicator and “ON” appear on the display. 1 The “hour” value starts flashing.
27 Setting the Clock If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. If the unit is on, press the STANDBY/ON switch to turn it standby 1 Press the TIME SET button once more.
26 Connect the PHONES jack (audio output jack) of a portable audio player to the AUX IN jack of the MC- DX220i using the supplied stereo mini plug cable. 1 Listening to an Exter nal Sour ce Play the source, and adjust the volume using the VOLUME buttons of the MC-DX220i and the audio player.
25 The Radio Data System (RDS) is a broadcasting service which allows stations to send additional information along with the regular radio programme signal. RDS works on the FM waveband in Europe only. Tune in an FM RDS station (see steps to of page 23).
24 Pr eset T uning You can store FM and AM stations into preset channels 1 to 10 respectively. If the power switch of the subwoofer turned off, the settings kept in memory (clock, preset stations, timer setting) will be erased. Tune in a station you want to listen to (see steps to of page 23).
23 Listening to the Radio 1 2 3 Press the FUNCTION button to select “TUNER”. 1 < You can also use the FM/AM button to select “TUNER”. Press the FM/AM button to select a band. 2 Select the station you want to listen to (auto selection). 3 Hold down the TUNING Up or Down button until the frequency display begins to change.
22 Every time the REPEAT button is pressed, the mode is changed as follows: When a CD is loaded: When a MP3 disc is loaded. < If one of the following buttons is pressed, repeat mode will be cancele.
21 T o check the programmed or der In the stop mode, press the MEMORY button repeatedly. The track number and program number will be shown on the display. T o add a track to the end of the program In the stop mode, press the MEMORY button repeatedly until “00” appears on the display.
20 MEMORY FUNCTION Up to 64 tracks can be programmed in the desired order. Press the FUNCTION button to select “CD”. 1 Press the MEMORY button. 2 “MEMORY” lights up in the display. < To cancel the program mode, press the Stop button ( H ). Press the Skip button ( .
19 Search for a track in a folder Press the MP3 button twice. The name of folder is displayed. < MP3 tracks recorded out of folders are in the “ROOT” folder. Press the SKIP button ( . or / ) to find the folder that the track you want to listen to is included.
18 Sear ch Mode (MP3 only) Initial letter of track name Track name Search for a name of track You can select the track by searching for its name. Press the MP3 button once. An alphabet (initial letter of a track name) and a track name are displayed. 1 Press the PLAY/PAUSE button ( G / J ).
17 T o suspend playback temporarily (pause mode) Press the Play/Pause button ( G / J ) during playback. Playback stops at the current position. To resume playback, press the Play/Pause button ( G / J ) again. T o stop playback Press the Stop button ( H ) to stop playback.
デバイスTeac Micro Hi-Fi Systemの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Teac Micro Hi-Fi Systemをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTeac Micro Hi-Fi Systemの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Teac Micro Hi-Fi Systemの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Teac Micro Hi-Fi Systemで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Teac Micro Hi-Fi Systemを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTeac Micro Hi-Fi Systemの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Teac Micro Hi-Fi Systemに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTeac Micro Hi-Fi Systemデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
