Technicolor - Thomsonメーカー545/570の使用説明書/サービス説明書
ページ先へ移動 of 98
SpeedT ouch™ 545/570 Multi-User ADSL Gateways Setup and User’ s Guide Release R4.2.1 500 SERIES.
.
SpeedT ouch™ 545/570 Setup and User’ s Guide Release R4.2.1.
Status v1.0 Change Note Pec kel be e nS Shor t Title Setup an d User's Guide ST545/570 R4.2.1 (en) Copyright © 2003 THOMSON. All r ights reserved. Passing on, and copyi ng of this document, use and communication of its contents is not perm itte d without written authorization from THOMSON.
E-DOC-CTC-20030814-0001 v1.0 3 Contents 1 SpeedTouch™ Installati on ........................ .................... 5 1.1 Getting Acquainted with the SpeedTouch™ ............................. ....................... 6 1.2 Setting Up the SpeedTouch™ .
E-DOC-CTC-20030814-0001 v1.0 4 5 SpeedTouch™ Web Inte rface................... .................. 47 5.1 Basic Topics Men u Links .................... ................................................. .............. 50 5.2 Advanced Topics Menu Links .
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 5 1 SpeedT ouch™ Installation Introduction Thank you for pur chasing a Sp eedT ouch™ Multi-User ADSL Gatewa y! With the SpeedT ouch™545 .
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 6 1.1 Getting Acquainted with the SpeedT ouch™ Introducing the SpeedT ouch™ P ri o r to p ro c e ed i n g, p l ea s e m ake s u re to re ad first the SpeedT ouch™ Quick Installa tion Guide.
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 7 SpeedT ouch™545 side panel The slot on the SpeedT ouch™545 side panel allows you to upgrade your SpeedT ouch™ for wireless connectivit.
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 8 Ethernet port LEDs Each Ethernet Port on the rear panel has one LED to indicate th e link integrity/activity . A second LED may be pr ovided to indicate the 10/100Base-T selection: Indicator Description Name LED Status 10/100Base-T (Optional) Off 10Base-T Ethernet connection.
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 9 1.2 Setting Up the SpeedT ouch™ W all mounting assembly Part of the package is a wall mou nting asse mbly which all ows y ou to conv eniently mount the SpeedT ouch™ on a wall. See “7.2 Using the W all Mounting Assembly” on page 76 for m ore in format ion .
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 10 Tu r n o n t h e SpeedT ouch™ Once all previous steps are completed, y ou can turn the SpeedT ouch™ on (I) with the pow er switch.
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 11 1.3 SpeedT ouch™ Configuration Setup Internet connectivity Some configuration m a y be requir ed to prepare the SpeedT ouch™ for Internet connec- tivity .
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 12 1.3.1 Microsoft W indows SpeedT ouch™ Configuration Setup Suppor ted MS Win dows OS s One of the following MS Windows OSs must be installed on your PC(s): • MS Windo ws 98 • MS Windo ws 98SE • MS Windows ME • MS Windows NT4.
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 13 Detection of the SpeedT ouch™ Pro ceed as follows: 1 Insert the SpeedT ouch™ Setup CD-R O M in y our PC's CD-R OM drive.
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 14 4 The Initial Setup window appears: Click Setup my SpeedT ouc h™ to star t the SpeedT ouch ™ Setup wizard. 5 The W elcome to the SpeedT ouch™ Setup Wizard window appears: Click Next . 6 The Software License Agr eement window a ppears: Y ou must accept before continuing.
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 15 7 The Setup wizard will sear ch for the SpeedT ouch™ on the network. The f ollowing window shows the detection pr ogress: 8 The Setup wizard should find y our Spee dT ouch™ device on the local network.
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 16 Configuration of the SpeedT ouch™ (and PC) Pro ceed as follows: 1 As soon as the Speed T ouch™ Setup wizar d has detected y our SpeedT ouch™ device, you can pr oceed with the configuration pr ocedure.
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 17 4 The SpeedT ouch™ Setup wizard will upda te the SpeedT ouch™ configuration and your PC’ s configuration according to the Se r vice pr ofile .
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 18 Additional configuration Some additional con figuration ma y be needed: • Wirele ss Settings When running the SpeedT ouch™ Set up wizard, the SpeedT ouch™ wireless Access Point settings will be set to their default va lues.
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 19 1.3.2 O perating System Independent SpeedT ouch™ Configuration Setup Suppor ted Systems As the SpeedT ouch™ is OS-independent, this configuration setup can be used by any computer system.
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 20 Configuration of the SpeedT ouch™ Pro ceed as follows: 1 Open a web br owser and br owse to the SpeedT o uch™ w e b pages at http://10.0.0.138 . See “5 SpeedT ouch™ W eb Interface” on pag e 47 for m ore information.
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 21 5 Easy Setup will update the SpeedT ou ch™ configuration accor ding to the Serv ice profile.
1 SpeedTouch™ Installation E-DOC-CTC-20030814-0001 v1.0 22 Additional configuration Some additional con figuration ma y be needed: • Wirele ss Settings When running the SpeedT ouch™ Set up wizard, the SpeedT ouch™ wireless Access Point settings will be set to their default va lues.
2 SpeedTouch™ Internet Connectivity E-DOC-CTC-20030814-0001 v1.0 23 2 SpeedT ouch™ Internet Connectivity Introduction This chapter provides inf ormation on how to configure y our SpeedT ouch™ according to your pr efer ences and ho w to access the Internet.
2 SpeedTouch™ Internet Connectivity E-DOC-CTC-20030814-0001 v1.0 24 2.1 Internet Connections via SpeedT ouch™’ s Embedded PPP Dial-in Client. Introduction The SpeedT ouch™ suppor ts both most popular connection methods: Routed PPP ov er A TM (PPPoA) and PPP ov er Ethernet (PPP oE).
2 SpeedTouch™ Internet Connectivity E-DOC-CTC-20030814-0001 v1.0 25 2.1.1 Using the MS W indows XP Internet Gateway Device Control Client Introduction MS Windows XP users can easily establish PPP se.
2 SpeedTouch™ Internet Connectivity E-DOC-CTC-20030814-0001 v1.0 26 The connected Internet Gateway As long as the SpeedT ouch™’ s embedded PPP dial -in client is connected, you ar e able to ov e.
2 SpeedTouch™ Internet Connectivity E-DOC-CTC-20030814-0001 v1.0 27 2.1.2 Using the SpeedT ouch™ W eb Pages Introduction As the SpeedT ouch™ web pages are contr o ll able fr om any Operating System with installed web br owser , the method to esta blish PPP sessions described below can be used by any computer system.
2 SpeedTouch™ Internet Connectivity E-DOC-CTC-20030814-0001 v1.0 28 During the Internet session Y ou are able to o verview and monitor your In ternet connectivity as long as the session is running via: • Dr SpeedT ouch™ See “3 Dr SpeedT ouch™ ” on page 37 .
2 SpeedTouch™ Internet Connectivity E-DOC-CTC-20030814-0001 v1.0 29 2.2 Connect to the Internet via a Host PPPoE Dial- in Client Introduction This section explains how you can connect to the Internet usin g a Br oadband PPPoE dial-in application.
2 SpeedTouch™ Internet Connectivity E-DOC-CTC-20030814-0001 v1.0 30 2.2.1 Using an MS W indows XP BroadBand Connection. Configuring a broadband connection Pro ceed as follows: 1 On the Start menu, click (Setti ngs >) Contr o l Panel . 2 The Control Panel window appears.
2 SpeedTouch™ Internet Connectivity E-DOC-CTC-20030814-0001 v1.0 31 6 In the next window , select Conn ect using a br oadband connection that requires a user name and passwor d : Click Next to continue. 7 In the next window , give a name to th e connection y ou are cr eating, e .
2 SpeedTouch™ Internet Connectivity E-DOC-CTC-20030814-0001 v1.0 32 9 In the next window , fill in the Internet account information. This inf ormation should be pro vided by your service provider: 10 At the end of the configuration the following window a p pears: Click Finish to complete the con figuration.
2 SpeedTouch™ Internet Connectivity E-DOC-CTC-20030814-0001 v1.0 33 5 As soon as the connection is establishe d, the connection message box and dial-up window are minimized into a DUN icon in the system tray: Y ou can open your web br owser and surf the Internet.
2 SpeedTouch™ Internet Connectivity E-DOC-CTC-20030814-0001 v1.0 34 2.2.2 Using the Mac OS X PPPoE Dial-in Client Configuring a broadband connection Pro ceed as follows: 1 On the Apple menu, click System Pref erences . 2 The System Pref erences window appears.
2 SpeedTouch™ Internet Connectivity E-DOC-CTC-20030814-0001 v1.0 35 Star ting a broadb and Internet session Pro ceed as follows: 1 Click the Internet Connect dockling. Note If the Internet Connect dockling is not a vailable , go to the Applications folder on the system startup disk and double-click Internet Connect .
2 SpeedTouch™ Internet Connectivity E-DOC-CTC-20030814-0001 v1.0 36.
3 Dr SpeedTouch™ E-DOC-CTC-20030814-0001 v1.0 37 3 Dr SpeedT ouch™ Introduction The Dr SpeedT ouch™ application allows y ou to m onitor , diagnose and troubleshoot your SpeedT ouch™ device. With Dr SpeedT ouch™you can: • Monitor the status and performance of the SpeedT ouch™ device.
3 Dr SpeedTouch™ E-DOC-CTC-20030814-0001 v1.0 38 Using Dr SpeedT ouch™ By default Dr SpeedT ouch™ is started automati cally at boot of y our system and runs in the background, i.e. minimized in the status ar ea . Pro ceed as follows: 1 Double-click in the status ar ea.
3 Dr SpeedTouch™ E-DOC-CTC-20030814-0001 v1.0 39 • Select the Perf ormance tab to monitor the downstream and upstream performance of your DSL connection: Note For mor e inf ormation on Dr SpeedT ouch™ please click Help in the applica- tion or press F1 for context sensitiv e help.
3 Dr SpeedTouch™ E-DOC-CTC-20030814-0001 v1.0 40.
4 Wireless Connectivity E-DOC-CTC-20030814-0001 v1.0 41 4 W ireless Connectivity Introduction The SpeedT ouch™570 and SpeedT ouch™545 (with wir eless upgrade card installed) feature a Wir eless LA.
4 Wireless Connectivity E-DOC-CTC-20030814-0001 v1.0 42 Wir eles s cli en t requirements Only wir eless client adapters compliant to IE EE802.11b DSSS, will be able to communi- cate with the SpeedT ouch™ and other members of the Spee dT ouch™ (W)LAN envi- ron m en t.
4 Wireless Connectivity E-DOC-CTC-20030814-0001 v1.0 43 4.1 First-time W ireless Client Association Initial SpeedT ouch™ wireless configuration When the SpeedT ouch™ leav es the factor y and after ev er y Reset-to-Defaults (See “7.
4 Wireless Connectivity E-DOC-CTC-20030814-0001 v1.0 44 First-time wireless client configuration For a successful association the wireless cl ient must be corr ectly configured f or : • the default WEP encr yption • the default Network Name.
4 Wireless Connectivity E-DOC-CTC-20030814-0001 v1.0 45 4.2 Connecting W ireless Clients Before you connect other wireless clients In case the SpeedT ouch™ has not been configured before (the SpeedT ouch™ is still in its default configuration), it is recommende d to pr oceed first with the configuration setup procedur es as described in “1.
4 Wireless Connectivity E-DOC-CTC-20030814-0001 v1.0 46 Registering wireless clients In case registration is enabled, you must r egister pending wireless network clients as foll ows: 1 M ake su re t h e w i rel es s cl ie n t i s c or rec tly associated to the SpeedT ouch™ WLAN.
5 SpeedTouch™ Web In terface E-DOC-CTC-20030814-0001 v1.0 47 5 SpeedT ouch™ W eb Inter face Introduction The SpeedT ouch™ comes with integ rated local configuration capabilities. The local configuration, via th e SpeedT ouch™ web interface , is based on the HTTP ser v er/web br owser concept.
5 SpeedTouch™ Web Interface E-DOC-CTC-20030814-0001 v1.0 48 Result As a result the System Information page appears: Note If the SpeedT ouch™ is stil l in its default configuration the embedded Easy Setup will appear automaticall y . T opic menu and links On the left of each of the SpeedT ouch™ we b pages a topics menu is pr ovided.
5 SpeedTouch™ Web In terface E-DOC-CTC-20030814-0001 v1.0 49 The following table l ists all advanced topic links: Save all The Sav e All link on the menu allows y ou to sa ve the SpeedT ouch™ settings. It is advised to back-up your sa ve d configurat ion on a regular basis.
5 SpeedTouch™ Web Interface E-DOC-CTC-20030814-0001 v1.0 50 5.1 B asic T opics Menu Links System Information C lick this link to displa y the System Info rmation page.
5 SpeedTouch™ Web In terface E-DOC-CTC-20030814-0001 v1.0 51 • Click the System tab to view some impor tant sy stem information of the Speed- T ouch™: The System table lists: • The SpeedT ouch™ product name. • The unique Medium Access Control (M A C) address of y our SpeedT ouch™.
5 SpeedTouch™ Web Interface E-DOC-CTC-20030814-0001 v1.0 52 Wirel ess Click this link t o displa y the SpeedT ouch™ Wirele ss page. Note If you ar e using a S peedT ouch™545 without wireless upgrade card installed, this page will not be a vailable.
5 SpeedTouch™ Web In terface E-DOC-CTC-20030814-0001 v1.0 53 • Click the Data Securit y tab to enable/d isable the 64-bit/128-bit WEP encr yp- tion: By default WEP encryption is enabled (a t 128-bit encr yption). T o change the WEP encr yption: 1 Select the desired WEP encryption level (64-bit or 128-bit).
5 SpeedTouch™ Web Interface E-DOC-CTC-20030814-0001 v1.0 54 • If registration is disabled, the follo wing table is shown: If Ne w Station Al low ed is selected, an y client with th e corr ect w ir.
5 SpeedTouch™ Web In terface E-DOC-CTC-20030814-0001 v1.0 55 System Log Click this link to view the System Log page. This page allows you to view the activity on t he SpeedT ouch™ since power on:.
5 SpeedTouch™ Web Interface E-DOC-CTC-20030814-0001 v1.0 56 5.2 Advanced T opics Menu Links Diagnostics Click this link to displa y the Diagnostics page.
5 SpeedTouch™ Web In terface E-DOC-CTC-20030814-0001 v1.0 57 • Expand subsequently the W an, DSL and Connections sections to view the curr ent DSL state and connection information: Click to instantly check all SpeedT ouc h™ connections on IP conn ectivity .
5 SpeedTouch™ Web Interface E-DOC-CTC-20030814-0001 v1.0 58 IP Addresses C lick this link to displa y the IP Addr esses page . This page allows y ou to view or add/delete specific I P addr ess entri.
5 SpeedTouch™ Web In terface E-DOC-CTC-20030814-0001 v1.0 59 NAPT C lick this link to displa y the Network Addr ess and P ort T ranslation (NAPT) page . This page allows you to: • View or ad d/delete specific static NAPT entries: T o add static NAPT entries proceed as follows: 1 Click New .
5 SpeedTouch™ Web Interface E-DOC-CTC-20030814-0001 v1.0 60 • Define a default server : By specifying a default ser v er IP addr ess (e.g. 10 .0.0.154 as shown abov e), all incoming connections that don’t match a specifically configur ed static NAPT entry will be forwarded to the device with this IP address.
5 SpeedTouch™ Web In terface E-DOC-CTC-20030814-0001 v1.0 61 DHCP C lick this link to displa y the Dynamic Host Configuration Pr otocol (DHCP) page .
5 SpeedTouch™ Web Interface E-DOC-CTC-20030814-0001 v1.0 62 Under Pr operties, you ar e able to select: • DHCP ser ver Enables the SpeedT ouch™ DHCP server .
5 SpeedTouch™ Web In terface E-DOC-CTC-20030814-0001 v1.0 63 • Click the DHCP Relay tab to view the DHCP r ela y pages. The DHCP rela y agent allows y ou to use DHCP clients and DHCP ser vers a vailable on diff erent networks.
5 SpeedTouch™ Web Interface E-DOC-CTC-20030814-0001 v1.0 64 DNS C lick this link to displa y the Dynamic Name System (DNS) page. This page allows you to: • View the curr ent SpeedT ouch™ DNS ser ver hostname leases: Via this table you can also ad d static DNS hostname entries.
5 SpeedTouch™ Web In terface E-DOC-CTC-20030814-0001 v1.0 65 • Back up the curr ent SpeedT ouch™ conf iguration, restore the SpeedT ouch™ default configuration, or upload a backup configuration file: • T o backup the curr ent configuration click Backup and follow the instruct ions.
5 SpeedTouch™ Web Interface E-DOC-CTC-20030814-0001 v1.0 66 Te m p l a t e s Click this link to displa y the T emplates page. This page allows you to: • View the templates cur rently stor ed in the SpeedT ouch™ memor y .
6 SpeedTouch™ NAPT Manager E-DOC-CTC-20030814-0001 v1.0 67 6 SpeedT ouch™ NAPT Manager Introduction The SpeedT ouch™ Network Addr ess Port T ran slation (NAPT) Manager is designed to simplify the configuration of the SpeedT ouch ™ NAPT engine .
6 SpeedTouch™ NAPT Manager E-DOC-CTC-20030814-0001 v1.0 68 3 The SpeedT o uch™ CD Br owser menu appears: Click Configur ation . 4 The following window appears: Click Configur e N APT Settings .
6 SpeedTouch™ NAPT Manager E-DOC-CTC-20030814-0001 v1.0 69 6 The Software License Agr eement appears: Y ou must accept before continuing. Click Ye s to accept. Note If you accepted this Softwar e Lice nse Agreement in a pre vious session of NAPT Manager , this window will not be shown an ymore.
6 SpeedTouch™ NAPT Manager E-DOC-CTC-20030814-0001 v1.0 70 Note If the Setup wizar d does not find any SpeedT ouch™ on the netw ork an erro r window appears.
6 SpeedTouch™ NAPT Manager E-DOC-CTC-20030814-0001 v1.0 71 3 The Add Port Mapping window appears. If you want to: • Enter a port mapping for a specific a pplication: Click the Basic tab. S elect an application in th e Application list and en ter a host IP address.
6 SpeedTouch™ NAPT Manager E-DOC-CTC-20030814-0001 v1.0 72 5 The NAPT Manager will update the S peedT ouch™ NAPT configuration. Y ou can follow t he progr ess in following windo w: 6 As soon as the NAPT Manager complete d the update of the SpeedT ouch™ NAPT configuration, following window will appear: Click Finish to close the NAPT Manager .
7 Support E-DOC-CTC-20030814-0001 v1.0 73 7 Suppor t In this chapter This chapter contains t he follo wing topics: To p i c P a g e Upgrading a SpeedT o uch™545 for Wir e less Netw orking 74 Using t.
7 Support E-DOC-CTC-20030814-0001 v1.0 74 7.1 Upgrading a SpeedT ouch™545 for W ireless Networking Introduction If you pur chased a SpeedT ouch™545, you can upgrade your device for pr oviding wire- less networking by installing the SpeedT ouch™010 wir eless upgrade card.
7 Support E-DOC-CTC-20030814-0001 v1.0 75 5 Put the cov er cap ov er the back plastic par t of the SpeedT ouch™010 wireless upgrade card as indicated below: 6 Holding the wire less upgrade card with.
7 Support E-DOC-CTC-20030814-0001 v1.0 76 7.2 Using the W all Mounting Assembly W all mounting assembly Part of the package is a wall mou nting asse mbly which all ows y ou to conv eniently mount the SpeedT ou ch™ on a wall.
7 Support E-DOC-CTC-20030814-0001 v1.0 77 7.3 SpeedT ouch™ System Software Upgrade Introduction This chapter describes how to upgrade the Sp eedT ouch™ system software. System software updates (all OSs) For ne w system software packages, y ou can: • Click the link, available on the SpeedT ouch™ CD Browser .
7 Support E-DOC-CTC-20030814-0001 v1.0 78 7.3.1 Checking for new Sy stem Software via the SpeedT ouch™ CD Browser Introduction If your computers runs a Microsoft Window s operating system y ou can use the Speed- T ouch™ CD Browser to check for ne w system software.
7 Support E-DOC-CTC-20030814-0001 v1.0 79 4 The following window appears: Click Check for new System Softw are . 5 Y o ur w eb browse r appears and opens the SpeedT ouch™ System Software Upgrade Internet website. Follow the instructions to download the latest system softwar e for y our SpeedT ouch™.
7 Support E-DOC-CTC-20030814-0001 v1.0 80 7.3.2 Checking for Syst em Software via the SpeedT ouch™ W eb Pages (all OSs) Checking for new System Softw are Pro ceed as follows: 1 Open a web br owser and go to the SpeedT ouch™ web pages.
7 Support E-DOC-CTC-20030814-0001 v1.0 81 7.3.3 Upgrade via the SpeedT ouch™ Upgrade Wiza rd Introduction The procedur e described in this section ar e valid only in case: • Y ou run an MS Windows Operating System . • Y our SpeedT ouch™ and computer are connected through a wir ed network.
7 Support E-DOC-CTC-20030814-0001 v1.0 82 4 The following window appears: Click Upgrade My SpeedT ouc h™ . 5 The W elcome to the SpeedT ouch™ Upgrade Wizard windo w appears: Click Next . 6 The SpeedT ouch™ Software License Agr eement window appears: Y ou must accept before continuing.
7 Support E-DOC-CTC-20030814-0001 v1.0 83 7 The Setup wizard will cont inue to sear ch f or the SpeedT ouch™ on the network. The following window shows the detection pr ogress: 8 The Setup wizard should find y our Spee dT ouch™ device on the local network.
7 Support E-DOC-CTC-20030814-0001 v1.0 84 9 The follow ing window shows the syste m software v ersion currentl y active on the SpeedT ouch™ as well as one or more syst em software v ersions available on the CD-R OM: Select the appropri ate system software v ersion and click Next to continue.
7 Support E-DOC-CTC-20030814-0001 v1.0 85 12 After upgrading the SpeedT ouch™, a final window appears to announce that the upgrade has been successful Click Finish to close the wizar d.
7 Support E-DOC-CTC-20030814-0001 v1.0 86 7.3.4 Upgrade via the SpeedT ouch™ W eb Pages Upgrade Procedure Proceed as f ollows: 1 Open a web br owser and go the SpeedT ouch™ web pages. 2 If needed, click Save All to sav e the current configuration.
7 Support E-DOC-CTC-20030814-0001 v1.0 87 5 Check whether the P assive software version filename field is empty . If not, click Remove passive to r emov e the dormant system software fr om the SpeedT ouch™ permanent storage . Note Removing the passive system software ma y tak e up to 2 minutes to complete .
7 Support E-DOC-CTC-20030814-0001 v1.0 88 7.4 SpeedT ouch™ Default Configuration Reset to default configuration Pro ceed as follows: 1 Mak e sure the SpeedT ouch™ is pow ered on. 2 Use a pencil to press the Default button at the SpeedT ouch™ until all the LEDs on the front panel start flashing.
7 Support E-DOC-CTC-20030814-0001 v1.0 89 7.5 UPnP™ on W indows XP Systems Adding UPnP™ If you are running Micr osoft Windows XP , it is recommended to add the UPnP™ component to y our system. Pro ceed as follows: 1 On the Start menu, click Contr ol Panel .
7 Support E-DOC-CTC-20030814-0001 v1.0 90 Adding Internet Gateway Device Discover y and Control Y our MS Windows XP system is able to di scov er and control Internet Gatewa y Devices (IGD), lik e the SpeedT ouch™545 and SpeedT ouch™570 on your local network.
7 Support E-DOC-CTC-20030814-0001 v1.0 91 7.6 T roubleshooting Configuration problems In case your SpeedT ouch ™ is unr eachable due to misconfiguration, you might consider a hardwar e reset to factor y defaults as described in “7.4 SpeedT ouch™ Default Config - uration” on page 88 .
7 Support E-DOC-CTC-20030814-0001 v1.0 92 No wirel ess connectivity . Mak e sure bot h wireless cli ent adapter and SpeedT ouch™ are allow ed to connect through wi reless channe ls as defined f or local regulator y domain. Mak e sur e that the WLAN client is conf ig- ured f or the corr ect wir eless settings (SSID , WEP).
7 Support E-DOC-CTC-20030814-0001 v1.0 93 No Line synchronization achie ved. DSL/W AN LED off or flashing. Check whether the central splitter or dedi- cated filters are installed corr ectly and that the corr ect line is patched to your Speed- T ouch™ line port.
7 Support E-DOC-CTC-20030814-0001 v1.0 94.
.
© 2003 THOMSON. All rights r e served. E-DOC-CTC-20030814-0001 v1.0 500 SERIES www.speedtouch.com Built for excellence.
デバイスTechnicolor - Thomson 545/570の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Technicolor - Thomson 545/570をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTechnicolor - Thomson 545/570の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Technicolor - Thomson 545/570の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Technicolor - Thomson 545/570で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Technicolor - Thomson 545/570を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTechnicolor - Thomson 545/570の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Technicolor - Thomson 545/570に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTechnicolor - Thomson 545/570デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。