Technicolor - ThomsonメーカーCS580の使用説明書/サービス説明書
ページ先へ移動 of 34
Safety Information For UK Only CONNECT THE MAIN LEAD INTO A MAINS POWER SOCKET POWER SUPPL Y 230V . It must not be connected to D.C. mains. Note: The mains lead of the set is fitted with a molded plug. If the mains socket are not compatible or if for any reason the plug is removed please follow the directions below .
Safety Information CAUTION! Invisible laser radiation when open. Avoid exposure to beam. Class 1 laser product. This system must be opened only by qualified technicians to prevent accidents caused by the laser beam. LASER λ = 780 nm, P max = 5 mW Rating Information: At bottom/rear of the unit.
Safety Information T able of Contents . . . . . . . . . . . . . . .1 Getting Started . . . . . . . . . . . . . . . .3 Unpacking the system . . . . . . . . . . . . . . . . . . . .3 Thomson multimedia Pack . . . . . . . . . . . . . . . .3 Computer System Requirements .
EN 2 T able of Contents File Navigation . . . . . . . . . . . . . . . . . . . . . . . . .19 mp3 Format . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 SmartT rax . . . . . . . . . . . . . . . . . . . . . . . . . . .20 Playing a mp3 disc . . .
3 EN Getting Started Unpacking the system Y ou should have the following: •o ne main unit (with 2 main speakers); • one remote control; • one FM antenna; • one AM loop antenna; • one MusicMa.
4 EN Getting Started Back View 1. FM Antenna Connector . 2. AM Loop antenna Jacks. 3. Main Speaker Jacks. 4. USB port. Using the FM and AM Antennas Before you use your audio system, you’ll want to make sure both the FM and AM antennas are positioned properly .
Insert the Included CD-ROM into CD-ROM Drive 1. T urn on your computer and place the Music Management CD that came with your audio system into your computer . 2. If the setup screen does not appear , double click My Computer , double click your CD-ROM drive icon, and double click Install to run the installer .
Install MusicMatch Jukebox MusicMatch Jukebox is a music management software used to organize and manage digital audio files and can be used to transfer the music to your audio system. 1. Click Install MusicMatch Jukebox to run the MusicMatch setup program.
Connecting the Audio System to the Computer Connect the audio system to your computer with the USB cable provided. Connect the smaller end of the USB cable to the USB port ( )on the back of the audio system and the larger end to the USB port on the computer .
8 EN General Contr ols Main Unit Front View ON / ECO - Press and hold in standby mode to enter ECO (power saving, without clock display) mode. Press briefly to turn the unit on and off. SOURCE - Selects CD player / tuner / tape player/ external source (AUX) / USB.
SKIP BACKWARD - In CD mode - Goes to the previous CD track; selects the previous program location. In USB mode - Skips to the previous file; In T uner mode - T unes down radio frequency; selects the previous preset station. In T ape mode - Rewinds tape.
Remote Control ON/ECO - Press and hold in ST ANDBY mode to enter ECO (power saving, without clock display) mode. Press briefly to turn the unit on and off. USB - Selects USB source. PROG - In CD and T uner mode - Enters program mode; In Clock and T imer mode - applies new settings.
11 EN General Contr ols SKIP BACKWARD - In CD mode - Goes to the previous CD track and setting options; searches backward through CD; In USB mode - Skips to the previous file; In T ape mode - Rewinds tape; In T uner mode - T unes down radio frequency .
12 EN Display DISC 1, 2, 3, 4, 5 - The corresponding disc number is displayed to Indicates which disc tray is loaded. The number will flash during playback to show which CD is currently playing. mp3 / mp3 PRO / SmartT rax - Indicates the CD format. FILE / FOLDER - Indicates the format of the current title for a mp3 CD.
Showing Demonstration Press DEMO/DIMMER to turn on/off demonstration mode. The demonstration scrolls through all display operations. Setting the Clock 1. Press and hold CLOCK until the hour flashes on the display . 2. Press SKIP BACKWARD or SKIP FORWARD to select the hour .
14 EN Settings Adjusting the Display Brightness 1. Press and hold DEMO/DIMMER for more than 2 seconds. 2. The display will show the current dimmer level on the first row and DIMMER SET on the second row to indicate you are currently in dimmer setting mode.
15 EN Sound Featur es V olume Control Tu rn the VOLUME knob on the main unit or press VOL or on the remote control to adjust the volume level. The display briefly shows the change in volume level. X-Bass Press X-BASS to turn on/off boosting the bass frequency .
16 EN CD and mp3 Playback Important CD and mp3 Information This unit is compatible with CD-RW/ CD-R discs for playback. The MusicMatch Jukebox This music management software, to be installed on your PC, allows you to compress music files recorded from your audio CDs into mp3 format and stores them on your PC.
17 EN CD and mp3 Playback Loading Discs 1. Press SOURCE repeatedly to select CD mode. 2. Press OPEN/CLOSE to open the disc compartment. 3. Insert up to 5 discs with label face up. 4. Press OPEN/CLOSE again to close the disc compartment. The occupied disc tray icons light and the current disc number shows on the display .
Repeat Press REPEA T/RDS to repeat the current track (REPEA T 1), current disc (REPEA T 1 DISC) , all discs (REPEA T ALL DISC), or turn repeat mode off (ALL DISC). Random Playback Press MIX/PTY to activate and de-activate random playback. The random icon is displayed when it is activated.
19 EN CD and mp3 Playback Playing a Program List While in PROGRAM mode , press PLA Y/P AUSE . If you are not currently in program mode, press PROG/SET to enter program mode before pressing PLA Y/P AUSE . Display Program List 1. While the CD player is stopped, press PROG/SET to enter PROGRAM mode.
mp3 Format When a mp3 audio disc is read, the mp3 icon will light on the display . The titles in the home directory will be displayed. FOLDER will light on the display if the current title is a folder .
Playing a mp3 disc 1. Insert a mp3 CD into the CD tray , you will see the name of the first two folder (or root directory) displayed on the screen. 2. Press the UP / DOWN button to scroll up and down and select the title you want to access. 3. If the selected title is a folder , press RIGHT / ENTER to enter into the folder selected.
For a SmartT rax CD, when you enter into one of the folders in the root directory , the corresponding icon lights on the left side of the title to show your location.
Mode With a SmartT rax CD, press MODE to select between SmartT rax mode and normal mp3 mode. Playlist (For Smart T rax CDs only) Press PLA YLIST to access additional playlists that are available on the CD. My Selection (For Smart T rax CDs only) Selected titles can be bookmarked and placed into My Selection folder .
V iew My Selection Press the MY SEL button on the remote control to view items in My Selection folder . All titles in My Selection folder are listed as songs. If there are no songs in My Selection, the below screen is displayed. Deleting Titles from My Selection 1.
Selecting USB Mode Press SOURCE repeatedly on the main unit or press SOURCE or USB on the remote control to select USB mode. Selecting PC CD-ROM 1. Insert a CD into the PC CD-ROM drive. 2. In USB mode, press MY SEL / CD on the remote control to select PC CD-ROM source.
26 EN Selecting T uner Band 1. Press SOURCE repeatedly to enter T uner mode. 2. Press CD INFO / BAND to select between MW , LW or FM Radio band. T uning to a Station Press SKIP BACKWARD or SKIP FORWARD to select frequency . Using Presets The tuner can be in either TUNE or PRESET mode.
27 EN T uning to a RDS Station 1. Press TUNE/PRESET to access preset station or press SKIP BACKWARD or SKIP FORWARD to select desired frequency . 2. If RDS station found, R•D•S lights on display with station name shown.
28 EN Selecting T ape Player Press SOURCE repeatedly to select tape mode. Playing a T ape 1. In tape mode, press on the cassette door to open it. 2. Insert a tape into the door and push the door closed. 3. Press SKIP BACKWARD / SKIP FORWARD to position the tape to the desired starting position.
29 EN Tr oubleshooting Tips Solution • Check power cord for a secure connection. • Unplug the unit for a moment, and then plug into power source again. • Check the outlet by plugging in another device. • Increase the volume setting. • Check connection to speakers.
30 EN Disconnect the audio system from the power source before performing any maintenance. Cleaning Clean the exterior of the system using a soft dust cloth. CD Player CAUTION! This system operates with a laser . It must be opened by only a qualified technician.
31 EN Important Information Safety Precautions • Never open the cabinet under any circumstances. Any repairs or internal adjustments should be made only by a trained technician.
32 EN Important Battery Information • Remove the batteries to avoid leakage if you do not use your remote control for more than one month. • Discard leaky batteries immediately as leaking batteries may cause skin burns or other personal injuries. Dispose of batteries in the proper manner , according to provincial and local regulations.
デバイスTechnicolor - Thomson CS580の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Technicolor - Thomson CS580をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTechnicolor - Thomson CS580の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Technicolor - Thomson CS580の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Technicolor - Thomson CS580で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Technicolor - Thomson CS580を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTechnicolor - Thomson CS580の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Technicolor - Thomson CS580に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTechnicolor - Thomson CS580デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
