Tekxon TechnologyメーカーMegaCamの使用説明書/サービス説明書
ページ先へ移動 of 17
1 Welcome MegaCam is a high-quality yet affordable digital camera that allows you to create, edit, share and send photos to friends and family . MegaCam is also not just a digital camera. It lets you record short segments of video. What’s more, it can be used as a Web camera when you connect it to a computer .
2 Contents Know Y our Camera ................................................................................................................ 3 Camera Controls ...........................................................................................
3 Know Y our Camera This is not your traditional camera. This is a “digital camera”. A digital camera allows you to take pictures without the use of film. Eliminate developing costs by downloading the photos to your PC. Y o u can send your photos via email, upload them to your web site.
4 Self-Timer - Use the Self-Timer button when you need to shoot photos of yourself. After you press the Shutter Release button, a 10-second countdown, giving you time to position yourself in front of the camera before your photo is taken. Digital Zoom - MegaCam provides four times magnification beyond the optical zoom.
5 Back of Digital Camera LCD Display - The LCD Display (Liquid Crystal Display) is one way used to view the photos you have taken; indicate camera settings as well as access the menu and info options. Viewfinder - Look through the Viewfinder to view the real life subject you want to photograph.
6 Picture Counter Number of remaining shots (Record mode) Number of stored photos (Play mode) Digital Interface Compar tment Located on the left side of the camera are the two ports for attaching the following cables: Video Output and USB. These ports will enable you to attach the appropriate cables from the camera to your computer and TV/VCR.
7 Note: 1. To remove the SD card, push the SD card once and the card will be ejected from the memory compartment. 2. MegaCam comes with built-in 8Mbyte internal NAND Flash memory. You don’t necessarily add extra memory for it. • Step 3 Attach the wrist strap to the strap holder at the side of the camera as illustrated in the picture below.
8 • Step 6 After the memory card has been formatted, all the pictures in the memory card will be deleted. And there is a message appeared: No pictures in memory . Press to switch to Record mode. Y ou can now begin taking pictures. Shooting Photos T aking pictures with your digital camera is a snap.
9 • Step 1 Turn the lens all the way to the left. This sets the digital camera to Macro mode , allowing you to take pictures at close range. • Step 2 To take pictures, follow the steps in the section, “Shooting Photos” on page 8. To take portrait and distant pictures: • Step 1 Turn the lens all the way to the right.
10 Deleting Photos Y ou can choose to delete a single photo or all the photos previously taken with the digital camera. Deleting a Single Photo If you are not satisfied with some pictures, you may delete them from the memory . • Step 1 Make sure that the camera is turned on.
11 • Step 4 Press the OK button. • Step 5 When you see the message, “Delete All Images?”, press to select Yes on the screen and then press the OK button to erase all of your pictures. If you change your mind and do not want to continue deleting all the pictures, press or to select Cancel on the menu screen.
12 • WB (White Balance) - Allows the camera to adjust to light conditions using preset selections (auto, sun, shade, tungsten, fluorescent). • TV Mode - Choose the TV standard that you use in your country for the video you record. • Language - Let you to choose different languages for Camera menu.
13 Press Move to Exit to exit the menu. • Step 5 Connect one end of the video output cable (the black colored plug) into the video out port located in the Digital Interface Compartment on the left side of the camera. • Step 6 Connect the other end of the video output cable (the yellow plug) to the video in plug on your TV/VCR.
14 • Step 3 And while you are recording, A red text “ REC ” appears on the upper right side of the LCD Display. And disappears after you terminate the recording process. And the remaining seconds will be counted down as you continue shooting. • Step 4 To stop recording, press the Shutter Release button again.
15 Installing All Software and Driver T o install the digital camera driver and all the software in the MegaCam CD: • Step 1 Place the MegaCam CD into your CD-ROM drive. • Step 2 The Software Installation screen appears, with the Install All the Software and Driver option selected.
16 Simply follow the on-screen instructions to complete the installation. Note: At the end of each software installation, “Setup Complete” appears and prompts you to restart your computer. If you have not yet finished installing the other software, click Cancel .
17 Appendix: Camera Specifications Image Sensor 1.3M CMOS Image sensor Optical Viewfinder Built-in LCD Display 1.5" color TFT LCD, Field of View 80% LED Backlight Resolution: 288 x 220 LCD Frame Rate: Min.
デバイスTekxon Technology MegaCamの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Tekxon Technology MegaCamをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTekxon Technology MegaCamの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Tekxon Technology MegaCamの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Tekxon Technology MegaCamで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Tekxon Technology MegaCamを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTekxon Technology MegaCamの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Tekxon Technology MegaCamに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTekxon Technology MegaCamデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。