TeledexメーカーSIP LD4200の使用説明書/サービス説明書
ページ先へ移動 of 16
SIP LD4100/4200 Series User Guide WHEN USING YOUR TELEPHONE EQUIPMENT , BASIC SAFETY PRECAUTIONS SHOULD AL WA YS BE FOLLOWED TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK AND INJURY TO PERSONS, INCLUDING THE FOLLOWING: 1. READ AND UNDERST AND ALL INSTRUCTIONS.
1. Introduction to the T eledex iPhone SIP LD Series IP Phone 3 1.1 Definitions, acronyms and abbreviations 3 1.2 The SIP LD Series works like a telephone 3 1.3 T wo lines 3 1.4 The network 3 1.5 The IP-PBX 3 1.6 The network system administrator 3 2.
1. Introduction to the T eledex iPhone SIP LD Series IP Phone The T ele dex iP hone SI P LD s eries I P phon e is a SIP-co mpliant network terminal. Instead of using standard analog or digital telephone lines, it connects to the network in the same manner as computers and printers do.
2.4 Connecting the Handset Plug one end of the coil cord into the RJ-10 receptacle on the handset, and the other end into the receptacle on the left side of the base.
Figure 2 shows the welcome page of the configuration portal. The phone can be configured through the main menu provided by this portal. NOTE: Except for upgrading the software online (decribed in subsection 3.2.7), the configuration for the SIP LD series will not be activated until the phone has been reset.
3.2.5 Configure the Call Featur es (Fig. 6) The configurable call features include Do Not Disturb, Call T ransfer , Call Forward No Answer , Call Forward Busy , Call Waiting, and Call Forward All. A call forward extension number can be pre-configured.
Fig 9: Reset the Phone 3.2.9 Restore to Factory Configuration T o restore the phone to the factory (default) configuration via the configuration portal, follow these steps: 1. Click “Restore to Factory” on the left menu. 2. Click “Restore” to restore factory settings.
4.7 T ransferring a Call The SIP LD series can transfer an ongoing call to another phone on the same network. T o transfer a call: 1. Press the FLASH key . This will place the call on hold and activate the second line. 2. Dial the number or extension of the party to whom you wish to transfer the call.
5.4 Three-W ay Conference Calls The SIP LD series supports three-way conference calling. The CONF or FLASH key allows the user to include two other parties in a three-way conversation. One three-way conference could be done using only one line or both lines.
Power Power supplied from network switch (PoE), or from approved local power adapter Dimensions & Weight W : 9.0” (22.86 cm) D: 8.5” (21.59 cm) H: 6.47” (16.43 cm) full upright position 3.97” (10.08 cm) full flat position Wt: 2.80 lb. (1.
Copyright 2008 Teledex LLC. All Rights Reserved. In formation and specification s subject to change without notice. One year warranty for Teledex SIP Teleph ones and Hybrid Display telephones Hardware.
Copyright 2008 Teledex LLC. All Rights Reserved. In formation and specification s subject to change without notice. • Costs incurred in removing t he telephone; shipping the t elephone to TELE DEX L.
Copyright 2008 Teledex LLC. All Rights Reserved. Informati on an d specifications subjec t to change without notice. TELEDEX iPhone END-USER LICENSE AGREEMENT IMPORTANT: READ CAREFULLY. This E nd User License Agreement is a legal agreement between you (either an individual or a single entity) and Teledex, LLC for the TELEDEX iPhone SOFTWARE.
Copyright 2008 Teledex LLC. All Rights Reserved. Informati on an d specifications subjec t to change without notice. or algorithms. You may not, and you shall not allow third parties to, modify the SOFTWARE or incorporate the SOFTWARE into, or with, any other software or create derivative works of any part of the SOFTW ARE.
Copyright 2008 Teledex LLC. All Rights Reserved. Informati on an d specifications subjec t to change without notice. not allow the exclusion of implied warranties so the above exclusion may not apply to you. You may have other rights that vary from jurisdiction to jurisdiction.
Copyright 2008 Teledex LLC. All Rights Reserved. Informati on an d specifications subjec t to change without notice. non-personally identifiable information from your use of the HARDWARE including, but not limited to, your Internet protocol addresses, serial numbers, the configuration of t he HARDWARE, usage statistics, etc.
デバイスTeledex SIP LD4200の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Teledex SIP LD4200をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTeledex SIP LD4200の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Teledex SIP LD4200の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Teledex SIP LD4200で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Teledex SIP LD4200を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTeledex SIP LD4200の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Teledex SIP LD4200に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTeledex SIP LD4200デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
