TeletypeメーカーBluetooth GPS Receiverの使用説明書/サービス説明書
ページ先へ移動 of 19
© 2003 TeleType GPS TeleType Bluetooth GPS Receiver User Manual.
Table of Contents Part I Bluetooth GPS Receiver 2 ............................. ............................. ............................. ............................. ............... 2 1 Getting Started .............................................
Bluetooth GPS Receiver 2 © 2003 TeleType GPS 1 Bluetooth GPS Receiver The TeleType Bluetooth GPS Receiver is a mobile GPS receiver integrated with Bluetooth technology.
TeleType GPS Manual 3 © 2003 TeleType GPS The initial state of the receiver refers to the last status of the receiver in memory. This mainly determines the length of time it will take for your GPS receiver to obtain a position fix.
Bluetooth GPS Receiver 4 © 2003 TeleType GPS 1.2.1 Diagram These are the physical features of your TeleType Bluetooth GPS Receiver: 1.2.2 Power Switch ON - Tells the Bluetooth GPS receiver to run on battery power. OFF - Tells the Bluetooth GPS receiver to run on power adapter.
TeleType GPS Manual 5 © 2003 TeleType GPS 1.2.3 LED Indicators Symbol LED Color Light Indication Bluetooth Connection Status Blue Rapid flashing: GPS receiver unit has just powered on, and is waiting for connection to your host device (PC, laptop, PDA, etc.
Bluetooth GPS Receiver 6 © 2003 TeleType GPS 1.2.7 Battery Charging Contact Provides in-unit charging of batteries when the Bluetooth GPS receiver is placed in the included charging stand. Please read the section entitled Recharging the Batteries for more information about the charging stand.
TeleType GPS Manual 7 © 2003 TeleType GPS Select Paired devices 3. Tap on the Add button in the Bluetooth: Paired device screen. You will then be taken to a screen that asks you for the Device name and Passkey . Tap on the icon to the right of the Device name field and select the appropriate Bluetooth device.
Bluetooth GPS Receiver 8 © 2003 TeleType GPS The PDA and Bluetooth GPS receiver are now paired! 5. Tap OK to exit the screen. Follow instructions from the next section to connect your PDA with your Bluetooth GPS receiver. 1.3.2 Connection To set up a connection between your host device (PC, PDA, etc.
TeleType GPS Manual 9 © 2003 TeleType GPS 3. Search for the TeleType Bluetooth GPS Receiver. Open Bluetooth Manager and select New > Connect! On the next screen that appears, select Explore a Bluetooth Device . 4. Tap the <No device selected> box to select a device.
Bluetooth GPS Receiver 10 © 2003 TeleType GPS 5. If this is your first time connecting to the TeleType Bluetooth GPS Receiver, you will see a Bluetooth Authentication screen. It will ask you to enter your passkey. Enter " 1234 " as the Passkey and tap OK .
TeleType GPS Manual 11 © 2003 TeleType GPS 7. You will be returned to the Bluetooth Manager screen. Double-tap TeleType SPP Slave to connect to the Bluetooth GPS receiver. Once connected, if you double-tap the icon again, you will see your connection status for the device.
Bluetooth GPS Receiver 12 © 2003 TeleType GPS 1.3.3 Using the Bluetooth GPS Receiver Make sure that your TeleType Bluetooth GPS Receiver is connected to your host device. 1. Run the TeleType GPS software. 2. Make sure the appropriate *_place.ttm file for your country is loaded.
TeleType GPS Manual 13 © 2003 TeleType GPS 5. Go to Tools > GPS Status > Status tab. You should see symbols scrolling up the gray box in the center. Note: If you do not see any activity on this screen, make sure your host device is set to the correct time zone.
Bluetooth GPS Receiver 14 © 2003 TeleType GPS The software will usually recognize one of two COM ports for the Bluetooth GPS receiver. The most common is COM 8. However, in cases where you have an older iPaq but have updated the ROM, the port for your host device may be COM 5.
TeleType GPS Manual 15 © 2003 TeleType GPS The following guidelines will improve performance and provide longer operating times for the Bluetooth GPS receiver: · Do not mix old and new batteries. · The use of alkaline-type batteries is recommended to provide the longest operating time.
Bluetooth GPS Receiver 16 © 2003 TeleType GPS 1.4 Troubleshooting Q: My Bluetooth host device is asking me for a passkey. What is it? A: It is "1234".
TeleType GPS Manual 17 © 2003 TeleType GPS typical setup and connection procedures for your Bluetooth receiver (for help with connection, please review the Connection section). Once you have established a pairing, double-click on or tap the "TeleType: SPP Slave" icon to connect your PDA to your Bluetooth receiver.
Bluetooth GPS Receiver 18 © 2003 TeleType GPS Do not paint on the Bluetooth GPS receiver.. Paint can clog the connector, jack, and prevent proper normal operation of the unit.
デバイスTeletype Bluetooth GPS Receiverの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Teletype Bluetooth GPS Receiverをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTeletype Bluetooth GPS Receiverの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Teletype Bluetooth GPS Receiverの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Teletype Bluetooth GPS Receiverで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Teletype Bluetooth GPS Receiverを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTeletype Bluetooth GPS Receiverの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Teletype Bluetooth GPS Receiverに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTeletype Bluetooth GPS Receiverデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
