Toshibaメーカー(T)XM6401B/F1の使用説明書/サービス説明書
ページ先へ移動 of 35
CD-R OM DRIVE (T)XM6401B/F1 HARD W ARE INSTR UCTION MANU A L VERSION 2.0 APRIL 2000 Covers.p65 6/13/00, 2:58 PM 1.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive i CD-R OM DRIVE Hardware Instruction Manual For the follo wing CD-R OM Driv es: XM-6401B TXM6401F1 TOSHIBA AMERICA ELECTRONIC COMPONENTS, INC. Storage Device Division 35 Hammond Irvine, CA 92618 Contents of this manual are subject to change without prior notice.
ii TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive FCC DECLARATION OF CONFORMITY CD-External Enclosure: TXM6401F1 Certification Date: 11/9/98 Toshiba America Electronic Components, Inc. - SDD 35 Hammond, Irvine, CA 92618 This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to part 15 of the FCC Rules.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive iii LASER CAUTION This appliance contains a laser system and is classified as a "CLASS 1 LASER PRODUCT". To use this model properly, read this Owner's Manual carefully and keep this manual for future reference.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive v T able of Contents Introduction ............................................................................. 1 SCSI drives ............................................................................ 2 Installing CD-ROM .
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 1 Intr oduction C ongratulations on the purchase of your T oshiba XM-6401B CD-R OM driv e. This manual will provide you with the information you will need to install and operate your new CD-R OM. This manual cov ers both the internal CD-R OM (XM-6401B) and the external CD-R OM (TXM6401F1).
2 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive SCSI DRIVES T he XM-6401B is a SCSI-2 (Small Computer Systems Inter- face) device. Some other SCSI devices you may already have connected to your computer are scanners, tape drives, or an- other CD-R OM dri ve.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 3 Installing CD-R OM B efore you begin to install your CD-R OM, make sure you hav e the items listed below . In most cases, these items will not come with your CD-R OM. See your local computer re- tailer to purchase them.
4 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive IMPOR T ANT NO TE Before you begin installing your CD-ROM, make sure your computer is switched OFF and the power cable is disconnected. CD-ROM JUMPER SETTINGS In order for your CD-R OM to work properly , it may be necessary for you to change the CD-R OM’ s jumper settings.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 5 All SCSI devices attached to your computer are assigned a SCSI-ID number from 0 to 7. Y our CD-R OM’ s SCSI ID must be set so that its ID number does not conflict with any other de vice’ s SCSI-ID in your system.
6 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive T erminator ON/OFF J umper This jumper turns termination power ON or OFF . If you are “daisy- chaining” a series of SCSI devices (connecting more than one SCSI de vice to your system), and the XM-6401B CD-R OM is not at the end of the chain , you must remo ve the jumper .
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 7 PLA CING CD-R OM INSIDE YOUR COMPUTER You are no w ready to install your CD-R OM inside your computer . Y ou should refer to the book that came with your computer , as com- puter casings are different from each other .
8 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive CABLING SCSI - The internal SCSI interface cable is connected to your SCSI host adapter card and fits into the socket on the back of your CD- R OM.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 9 If there is no po wer cable in your system, contact your computer dealer . Y ou may need a “power splitter lead” (a Y shaped cable which taps two power outputs from one input).
10 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive CD-ROM DRIVE Host Computer I/F Card Terminator SCSI Cable CD-ROM DRIVE Host Computer I/F Card Terminator SCSI Cable Interface Connector External Terminator (.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 1 1 COMPLETING INST ALLA TION After you have connected all the necessary cables, you can push the CD-R OM completely into the slot. There are 12 scr ew holes on the XM-6401B that are used to mount the CD-R OM into your computer .
12 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive INST ALLING AN EXTERN AL CD-R OM (TXM6401F1) The instructions that follow ar e for use on PC and Macintosh systems. In order to install your external CD-R OM successfully , you will need to complete the following steps.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 1 3 SCSI ID Switch TERMINA TION If the CD-R OM is being installed as the last dri ve in a daisy-chain or as the only SCSI device, you must install an external terminator on one of the SCSI connectors at the rear of the CD-R OM.
14 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive CABLING SCSI - Locate the SCSI interface card connection or SCSI port at the back of your computer . Plug the SCSI cable into socket, making sure it f its snugly . (If the plug has fixing scr ews or c lips, use them to ensur e the connector is firmly fixed.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 1 5 SOFTW ARE In order for your computer to recognize the CD-R OM, you must in- stall a CD-R OM software dri ver . PCs - If you do not have this software, contact the manufacturer of your SCSI host adapter card.
16 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive Using y our CD-R OM THE CONTR OLS The XM-6401B/TXM6401F1 CD-R OM driv es hav e the follo wing controls and features: ➬ CD Loading T ray ➬ EJECT Button .
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 1 7 THE FR ONT P ANEL Eject Button - The EJECT button is used to open the disc tray so you can install or remove a disc. The EJECT Inhibit Jumper must be set to OFF in order for the EJECT button to function. (If jumper is in ON postion, the drive accepts all eject contr ol fr om the computer).
18 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive THE BA CK PANEL The pictures below show the back panel of the XM-6401B and TXM6401F1 CD-R OM dri ves. Descriptions of features are as fol- lows: XM-6401B Back P anel TXM6401F1 Back P anel Audio Out Connector - Outputs analog signal on the XM-6401B only .
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 1 9 SCSI Connector(s) - Connects CD-R OM to computer . The TXM6201F1 has two SCSI connectors. P o wer Connector - Connects CD-R OM to power source (either po wer adapter or power cable from computer). P o wer Switch - T urns power ON and OFF on the TXM6401F1.
20 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive OPERA TING THE CD LO ADING TRA Y T o open the CD loading tra y , just press the EJECT button. After in- serting or removing a disc, press the EJECT button again or gently push on the open disc tray , the tray will automatically close.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 2 1 EMERGENCY EJECT CA UTION! The following procedure is intended only as a last resort when pressing the eject button f ails to open the CD tr ay . 1. T urn CD-R OM driv e po wer OFF . 2. Insert a solid bar (i.
22 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive Specif ications T he following describes the specifications of the XM-6401B CD-ROM. (Specifications are subject to change without notice.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 2 3 ■ Access Time • Average Random Access Time 3 : 80 msec typ. (40X mode) • Average Random Seek Time 4 : 75 msec typ. (40X mode) • Average Full Stroke Access Time 5 : 135 msec typ. (40X mode) 2 6-14X rotational speed is fixed for CD-audio (Red-Book) format.
24 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive ■ Audio Output • Analog output (.90 Vrms typ. at load impedance 10K Ω min.) • Headphone output terminal: 3.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 2 5 5.5" (139.7 mm) 3.1" (79.2mm) 1.9" (47.4mm) 0.5" (11.8mm) 7.6" (193mm) Power Connector (4P) TOP (HORIZONTAL POSITION) BOTTOM Analog Audio Out Connector (3P) Mode Select Headers 4-M3 (TAP) SCSI Connector 3.
26 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive T echnical Support S hould you require technical support, contact your local distributor . If your distributor is unable to answer your ques tions, hav e them call T oshiba Storage Device Di vision T echni- cal Support, on your behalf.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 2 7 Repair Center S hould your CD-ROM require maintenance, contact Toshiba SDD's Repair Center. In order to return your CD-ROM a Return Authorization Number (RA#) must be obtained from Toshiba's SDD Repair Center (do not send drives without an autho- rized RA number).
28 TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive W arranty T oshiba America Electronic Components, Inc. ( “ TAEC ” ) warrants that all products will, upon delivery by TAEC to the customer in new condition, be free from defects in material and workmanship for a period of twelve (12) months after delivery.
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive 2 9 Force Majeure: Non-performance by Buyer or Seller shall be excused to the extent that performance is rendered impossible by war, fire, flood, earthquakes, l.
470063-B0 P/N 470073-B0 Covers.p65 6/13/00, 2:58 PM 2.
デバイスToshiba (T)XM6401B/F1の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toshiba (T)XM6401B/F1をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba (T)XM6401B/F1の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba (T)XM6401B/F1の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba (T)XM6401B/F1で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba (T)XM6401B/F1を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba (T)XM6401B/F1の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba (T)XM6401B/F1に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba (T)XM6401B/F1デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
