Toshibaメーカー24L4200Uの使用説明書/サービス説明書
ページ先へ移動 of 141
GMA300009011 4/12 Note: T o display a High Definition picture, the TV must be receiving a High Definition signal (such as an over- the-air High Defin ition TV broadcast, a High Definition digit al cable program, or a High Definition digital satellite program).
2 Dear Customer , Thank you for purchasing this T oshiba LED TV . This manual will help you use the many exciting features of your new LED TV . Before operating your LED TV , carefully read this manual completely .
3 Im p orta n t Safety I n structio n s 1) Read these instructions . 2) Keep these instructions . 3) Heed all war nings . 4) Follow all instru ctions . 5) Do not use this apparatus near water . 6) Clean only with dry cloth . 7) Do not block any ventilation openings .
4 24) When selecting a location for the TV , • NEVER allow any part of th e TV to hang over the edge of the suppor ting furniture, • NEVER place the TV on tall fu rniture (for example, ente rtainm.
5 38) W ARNING: RISK OF ELE CTRIC SHOCK ! Never spill liquids or push objects of any kind into the TV cabinet slot s. 39) During a lightening storm, do not touch the connecting cabl es or prod uct.
6 Removing the Pedest al St and 1) Carefully lay the front of the unit face down on a flat, cushioned surface such as a quilt or blanket. Leave the stand prot ruding over the edge of the surface. Note : Extreme care should always be used when removing the pedest al stand to avoid damage to the LCD pa nel.
7 FCC Declaration of Conformity Compliance Statement (Part 15): T oshiba 19L4200U, 24L4200U, 32L4200U, 40L5200U, 46L5200U, 50L5200U T elevision models comply with Part 15 of the FCC Rules.
8 T rademark Information • ClearFrame, C ableClear , ColorStream, DynaLight, GameTimer , SurfLock are trademarks or re gistered trademarks of T oshiba Am erica Information Systems, Inc. and/or T oshiba Corp oration. • Audyssey EQ ® provides clear , accurate, and natural sound right out of the box.
9 Contents Chapter 1: Introduction ... ......................... ..................... ............. 15 Features ..................................................................16 Overview of installation, setup, and use ..................17 TV front and side panel c ontrols and connections .
10 Con t en t s Connecting DVD player with Color S tream ® & satellite receiver ............................................ 26 Connecting an HDMI® or DVI device to the HDMI® input ...............................................................
11 Con t en t s Tuning channels using the Channel Browser ..........65 Favorites browser ............................................. 66 Elements of the Channel Browser .....................67 Adding and clearing channels and inputs in the History List .
12 Con t en t s S electing stereo/ S AP broadcasts ...................... 85 Adjusting the audio quality ................................ 86 Audyssey Premium Television™ .......................87 Audyssey ABX™ .....................................
13 Con t en t s No S ignal Power Down .........................................110 Using HDMI® CEC ................................................ 111 HDMI® CEC playback device (DVD player, etc.) control ............................................
14 Con t en t s Power maximum current ................................ 129 Power consumption ........................................129 Audio power .................................................... 129 S peaker type ...............................
15 Chap t e r 1 Introduction Safe t y icons This manual contains safety instructions that must be observed to a void potential hazards that could result in personal injuri es, damage to your equipment, or loss of data.
16 In tr oduc t ion Fe a t u r e s Fea t u r es The follo wing are just a few of th e many e xciti ng features of your new T o shiba wide screen, in tegrated HD, LED TV : ❖ Integrated digital tu ning (8VSB A TSC and QAM) — Eliminates the n eed for a separate d igital conv erter set-top box (in most cases).
17 In tr oduc t ion Overview of installation, setup, and use Ove r view of ins t alla t ion, se t up, and use Follo w these steps to set up your TV and begin using its many exciting features. 1 Carefully read the importan t safety , installation, care, and service information.
18 In tr oduc t ion TV fr ont and side panel contr ols and conn ections 10 Program channels into the TV’ s channel memory , see “A u t o T uning” on page 52 . 11 For details on using the TV’ s features, see chapters 6 and 7. 12 For hel p, refer to “T rou bleshooting” on page 122 .
19 In tr oduc t ion TV back panel connections 3 PO WER —T urns the TV On/Off . If the TV stops responding to the buttons on the remote control or TV control pan el and you cannot turn off the TV , press and hold the PO WER button on the TV control panel for a few seconds to reset the TV .
20 In tr oduc t ion TV bac k panel connections device. HDMI ® connection is necessa ry to recei ve 1080p signals. 3 PC/HDMI-1 (A udio) IN —PC audio input termin al is shared with an HDMI-1 analog audio i nput terminal, and its use can be configured in the Audio Setup menu, see “Setting the PC Audio” on page 101 .
21 In tr oduc t ion TV back panel connections 2 Digital A UDIO OUT —Opt ical audio output in Dolb y® Digital or PCM (pul se-code modulation) format for connecting an external Dolby Digital decoder, amplif i er , or home th eater system with optical audio input.
22 Chap t e r 2 Connecting Y our TV Ove r view of cable t ypes Before purchasing cables, know the connector types your de vices require. Y ou can purchase cables from most st ores that sell audio/video devices.
23 Connec t ing Y ou r TV Overview of cable types S t anda r d A/V cables ( r ed/whi t e/yell ow) (Sample Illustration) Standar d A V cabl es Standard A/V cables (composite video) usually come in sets of three, and connects to video de vices with analog audio and composite video outpu t.
24 Connec t ing Y ou r TV Overview of cable types HDMI ® cables provide the best audio and picture quality . Op t ical audio cable (Sample Illustration) Optical audio cable Optical audio cable connec.
25 Connec t ing Y ou r TV Connecting a VCR, anten na, cable TV , or camcor der Connec t ing a VCR, an t enna, cable TV , o r camco r de r (Sample Illustration) L4200 U Series—Connecting to a VCR, an.
26 Connec t ing Y ou r TV Connecting D VD player with Colo rStr eam ® & satellite r eceiver When you use a cable box, you may not be able to use the remote control to program or access certain features on the TV . When you use ColorStream ® HD or Video, switch A V input mode appropriately .
27 Connec t ing Y ou r TV Connecting D VD player with ColorStr eam ® & satellite r eceiver ColorStream ® and composite video cables cannot be connected simultaneously .
28 Connec t ing Y ou r TV Connecting D VD player with Colo rStr eam ® & satellite r eceiver ❖ If your D VD player or sate llite recei ver does not hav e component video, connect a standard A/V cable to the A UDIO/VIDEO termin al.
29 Connec t ing Y ou r TV Connecting an HDMI® or D VI device to the HDMI® input Connec t ing an HDMI ® o r DVI device t o t he HDMI ® inpu t The HDMI ® input on your TV recei ves digital audio and uncompressed digital video from an HDMI ® source de vice, or uncompressed digital video from a D VI (Digital V isual Interface) source de vice.
30 Connec t ing Y ou r TV Connecting an HDMI ® or D V I device to the HDMI® input (Sample Illustration) L5200 U Series—HDMI ® connections T o view the HDMI ® device video: Select HDMI 1 , HDMI 2 , or HDMI 3 (for L5200U Series) video input source on the TV .
31 Connec t ing Y ou r TV Connecting an HDMI® or D VI device to the HDMI® input For more informati on, see “Setting the HDMI® audio mode” on page 56 (Sample Illustration) L4200 U Series—D VI .
32 Connec t ing Y ou r TV HDMI® CEC connection T o ensure that the HDMI ® or DVI device is reset properly: ❖ When turning on your electronic components, turn on the TV first, and then the HDMI ® or DVI device. ❖ When turning off your electronic components, turn off the HDMI ® or DVI device first, and then the TV .
33 Connec t ing Y ou r TV HDMI® CEC connection (Sample Illustration) L5200 U Series—HDMI® CEC co mpatible audio r eceiver and playback device connections T o connect an HDMI ® device, you will need one HDMI ® cable (type A connector) per HDMI ® device (see “Overvie w of cable types” on page 22 ).
34 Connec t ing Y ou r TV Connecting a digital audio system Connec t ing a digi t al audio sys t em The TV’ s DIGIT AL A UDIO OUT terminal outputs a Dolby ® Digital or 2-channel down-mixed PCM (pulse-code modulation) signal for use with an external Dolby Digital decoder or other external audio system with optical audio input.
35 Connec t ing Y ou r TV Connecting a digital audio system 4 Press the ( / arrow) b uttons to select Dig ital Outpu t Fo r m a t . 5 Press the ( / arrow) b uttons to select either Dolby Di gital or PCM , depending on your device, see “ Audyssey Premium T elevision™” on p age 87 .
36 Connec t ing Y ou r TV Connecting an analog audio system Connec t ing an analog audio sys t em This connection allows you to use ex ternal speaker with an external analog audio amplifier to adjust the le vel.
37 Connec t ing Y ou r TV Connecting a computer (Sample Illustration) L4200 U Series Co mputer connections (Sample Illustration) L5200 U Series Comput er connections Computer PC audio output PC audio .
38 Connec t ing Y ou r TV Connecting a computer T o use a computer, set the monitor output resol ution on the computer before connect ing it to the TV . The supported signal formats are VGA, SVGA, XGA, WXGA and SXGA. For detailed signal specifications, see “ Acceptable signal formats for PC IN, HDMI®” on page 132 .
39 Connec t ing Y ou r TV Connecting a computer (Sample Illustration) L4200U Series Co nnections to HDMI ® terminal (Sample Illustration) L5200 U Series Connecti ons to HDMI ® terminal TV back panel.
40 Connec t ing Y ou r TV Connecting a computer The supported signal formats are VGA, SVGA, XGA, WXGA, SXGA, 480i (60Hz), 480p (60H z), 720p (60Hz), 108 0i (60Hz), and 1080p (24Hz/60Hz). For signal specifications, see “ Acceptable signal formats for PC IN, HDMI®” on page 13 2 .
41 Chap t e r 3 Using the Remote Control Ins t alling ba tt e r ies T o install batteries: 1 Re move the b att e ry cove r fr o m t h e back of the remote control. (Sample Illustration) Removing the r emot e back cover 2 Insert two AAA batteries, corresponding to the (+) and (-) markings on the battery compartm ent.
42 Using t he Rem o t e Con tr ol Remote contr ol effective range ❖ Be sure to use AAA size batteries. ❖ Dispose of batteries in a designated disposal area. ❖ Always consider the environment when disposing of batteries. Always follow applicable laws and regulations.
43 Using t he Remo t e Con tr ol Learning about the remote contr ol Lea r ning abou t t he r emo t e con tr ol The buttons used for operating the TV are described below . For the HDMI® CEC remote contro l functions, see “HDMI® CEC playback device (D VD player , etc.
44 Using t he Rem o t e Con tr ol Learning about the r e mote contr ol 1 The PO WER button turns the TV On/Off . When the TV is on, the power LED indicator on the TV front glows green. 2 The PIC SIZE b utton cycles through the picture sizes, see “Selecting the picture size” on page 71 .
45 Using t he Remo t e Con tr ol Learning about the remote contr ol 18 The Arrow buttons ( / / / ) select or adjust programming menus when a menu is on-screen. 19 The Arro w buttons ( / ) open the Channel Bro wser and tune to the previous/nex t channel in the channel history when TV programming is on-screen.
46 Chap t e r 4 Menu Layout and Navigation Main menu layou t The tables below and on the ne xt pages provide a quick overvie w of your TV’ s menu system. T o open the Installation menu s (illustrated below), press MENU on the remote control or TV control panel.
47 Menu Layou t and Naviga t ion Main menu layout Preferences CC Selector Launches the temporary CC Selector Base CC Mode Off/CC1/CC2/CC3/CC4/T1/T2/T3/T4 Digital CC Settings Opens the Digital CC Setup.
48 Menu Layou t and Naviga t ion Setup/Installation menu layout Se t up /Ins t alla t ion menu layou t The Installation menu contains th e T errestrial and System Status menus.
49 Menu Layou t and Naviga t ion Navigating the menu system 3 Press the ENTER b utton to save your menu settings or select a highlighted item. A highlighted menu item appears in a different color in the menu.
50 Chap t e r 5 S etting up your TV Ini t ial S e t up When you f irst turn on or reset the TV , the Init ial Setup windo w will appear . 1 In the M enu Lang uage field, press the ( / arrow) b uttons to select your preferred language. 2 Press the ( / arro w) buttons to select Tim e Z o n e S e tu p .
51 Se tt ing up you r TV Initial Setup Menu language Y ou can choose from three dif ferent menu language settings (English, Français, and Español) fo r the on-screen display of menus and messages. T o select the me nu language: 1 Press t h e MENU bu tton and open the Pr eferences menu, and highlight Men u Language .
52 Se tt ing up you r TV Storing channels in memory (optional) 3 Open the T errestrial me nu, highli ght Input Conf iguration , and then press the ENTER button. (Sample Image) T err estrial menu - Input Configuration selection 4 Highlight ANT/CABLE In and press the ( / arrow) b uttons to select the input source ( Cable or Antenna ).
53 Se tt ing up you r TV Storing channels in memory (optional) ❖ Y ou must set up the ANT/CABLE input source before programming channels. See “ANT/CABLE IN” on page 51 . ❖ The automatic channel progr amming process will erase channels that were previously programmed into the TV’ s memory .
54 Se tt ing up you r TV Storing channels in memory (optional) A new se t of Installation m enu icons appears. 4 Open the T errestrial me nu, highli ght Channel Program to open the Start Scan window , and then press the ENTER button to begin channel programming.
55 Se tt ing up you r TV Setting channel skip Se tt ing channel skip T o prev ent a channel from being viewed, you can set it to be skipped. 1 From the Set up menu, highl ight Installation , and then press the ENTER button. 2 Press the ( / arrow) b uttons to select Channel Options , and then press th e ENTER b utton.
56 Se tt ing up you r TV Setting the A V input mode Skipped channels cannot be selected with the CH arrow buttons; however , they can be accessed using the number keys on the remote control.
57 Se tt ing up you r TV V iewing the digital signal meter mode.) See “Connecting an HDMI® or D VI device to the HDMI® input” on p age 29 . (Sample Image) HDMI ® Audio mode selection 4 T o sav e the setting, highlight Done , and then press the ENTER button.
58 Se tt ing up you r TV Setting the time zone 2 Highlight Install ation , and then press the ENTER button. A new set of Installation menu icons appears.
59 Se tt ing up you r TV V iewing the system status 3 Open the System Status menu, highlight System Information , and then press the ENTER b ut ton. 4 Press the ( / arrow) buttons to scroll through the menu bar to select Fac t o r y D e fa u l t s or Support I nf ormation .
60 Chap t e r 6 Using the TV’ s f e a t u r e s Selec t ing t he video inpu t sou r ce T o select the video input source to view: 1 Press t h e INPUT button on the remote control or TV control panel. 2 Do one of the following: ❖ Press 0-4 (L4200U Series) o r 0-5 (L5200U Series).
61 Using t he TV’ s fea t u r es Selecting the video input sour ce ❖ Repeatedly press the INPUT button on the remote control or TV control panel to change the input setting. The current signal source displays in the top right corner of th e Input Selection screen.
62 Using t he TV’s fea t u r es Labeling the video input sources If a HDMI® CEC device with HDMI ® switching capabili ty (e.g. Audio Recei ver) is connected to the HDMI ® input, press the INPUT button on the remote control or TV control panel repeatedly to high light HDMI 1 or HDMI 2 .
63 Using t he TV’ s fea t u r es Labeling the video input sources ❖ V ideo Recorder ❖ Hide (to hide an unused input in t he Input Selection screen and in the Channel Browser Inputs list) If you select PC in the Input Selection screen, you can choose only “– –”, “Game Console”, or “Hide” as the label.
64 Using t he TV’s fea t u r es Labeling the video input sources 5 T o sav e the new input labels, highligh t Done , and then press the ENTER button.
65 Using t he TV’ s fea t u r es T u ning channels using the Channel Br owser T uning channels using t he Channel B r owse r The Channel Bro wser provides an easy na vigation interface for all your channels and inputs. This feature all ows you to: ❖ Navigate and select entries.
66 Using t he TV’s fea t u r es T uning channels using the Channel Br owser Favo r i t es b r owse r The Fa vorites Browser allo ws you to quickly set up a fa vorite channels/inputs list that is integrated into the Channel Browser . T o add a fav orite channel/input: 1 T une to the channel or input .
67 Using t he TV’ s fea t u r es T u ning channels using the Channel Br owser 5 Press the ( arrow) b ut ton to highlig ht Inputs List , and then press the ( / arro w ) buttons to select On or Off . 6 Press the ( arrow) b ut ton to highlig ht Fa vorites List , and then press the ( / arrow) b uttons to select On or Off .
68 Using t he TV’s fea t u r es T uning channels using the Channel Br owser 3 Channel or input currently being vi ewed. 4 Channel or input that is currently high lighted in the browser .
69 Using t he TV’ s fea t u r es T u ning channels using the Channel Br owser Adding and clea r ing channels and inpu t s in t he His t o r y Lis t As a channel or input is tuned, the Channel Browser adds it to the History Li st and displ ays it on th e right sid e of the Channe l Browser .
70 Using t he TV’s fea t u r es T uning channels using the Channel Br owser T uning t o a specific channel (p r og r ammed o r unp r og r ammed) T o tune analog channels: Press the Channel Number (0–9) on the remot e control. F or example, to select ch annel 125, press 1, 2, 5, and then press the ENTER button.
71 Using t he TV’ s fea t u r es Selecting the picture size 2 Press and hold the CH R TN button for a few seconds until the message “Memorized” appears on the screen. The channel has been programmed to the CH R TN button. 3 Y ou can then change channels repeatedly , and when you press the CH R TN button, the memorized channel will be tuned.
72 Using t he TV’s fea t u r es Selecting the pictur e size T o select the picture size using the menus: 1 Select Picture Size in the Theater Settings menu. 2 Press the ( / arrow) b uttons to select the desired picture size setting. 3 Highlight Do ne , and then press the ENTER button.
73 Using t he TV’ s fea t u r es Selecting the picture size The Full setting is for v iewing in 1080i, 1080p, and 720p program source. (Sample Illustration) Picture size - Full The edges of the picture may be hidden. Thea t e r Wide 1 This setting is for vi ewing in 4:3 format programs.
74 Using t he TV’s fea t u r es Selecting the pictur e size Thea t e r Wide 3 This setting is for viewing letter box programs with subtitles. (Sample Illustration) Pictur e size - TheaterW ide 3, letter box with subtitles The picture’ s top and bot tom edges are hidden*.
75 Using t he TV’ s fea t u r es Selecting the picture size 4:3 (Sample Illustration) Picture size - 4:3 Some program formats will display wi th sidebars and/or bars at the top and bottom . No r mal This setting is for viewing VGA, SV GA, XGA, WXGA, and SXGA sources.
76 Using t he TV’s fea t u r es Scr olling the The aterW ide® pictur e (TheaterW ide 2 and 3 o nly) Sc r olling t he Thea t e r Wide ® pic t u r e (Thea t e r Wide 2 and 3 only) Y ou can set separate scroll settings for the TheaterW ide 2 and TheaterW ide 3 modes for each input.
77 Using t he TV’ s fea t u r es Using the A uto Aspect fe atur e Using t he Au t o Aspec t fea t u r e When this feature is set to On, th e TV will automatically select the picture size when one of.
78 Using t he TV’s fea t u r es Selecting the cinema mode Selec t ing t he cinema mode When you view a D VD (3: 2 pulldown processed) from a D VD player connected to the VIDEO , ColorStr eam ® HD (component video), or HDMI ® inputs on the TV , smoother motion can be obtained by setting the Cinema Mode to Film .
79 Using t he TV’ s fea t u r es Adjusting the pictur e Adjus t ing t he pic t u r e Selec t ing t he pic t u r e mode Y ou can select your desir ed picture settings from the modes described below . PC mode is available for HDMI ® and PC inputs only (grayed out for other input sources).
80 Using t he TV’s fea t u r es Adjusting the pictur e 3 Press the ( / arrow) buttons to sel ect the picture mode you prefer , and then press the ENTER button.
81 Using t he TV’ s fea t u r es Using closed captions 3 Press the ( / arrow) buttons to select the picture quality you wish to adjust (C ontrast, Backlight, D ynaLight, Brightness, Color , Tint, or Sharpness), and then press the ( / arrow) buttons to adjust the setting.
82 Using t he TV’s fea t u r es Using closed captions If the program or video you selected is not closed captione d, no captions will display onscreen. T o view text, highlight T1 , T2 , T3 , or T4 . (Sample Illustration) Captions - text If text is not available in your area, a black rectangle may a ppear on screen.
83 Using t he TV’ s fea t u r es Using closed captions 3 Press the ( / arrow) buttons to highl ight the characteristic you wish to change, and then press the ( / arro w) buttons to select the format for that characteristic. 4 T o sav e the new settings, highlight Done , and then press the ENTER button.
84 Using t he TV’s fea t u r es Adjusting the audio 4 T o sav e the new settings, highlight Done , and then press the ENTER button. 5 Press the EXIT button. Adjus t ing t he audio Mu t ing t he sound Press the MUTE b utton to partially red uce (1/2 Mute) or turn off (Mute) the sound.
85 Using t he TV’ s fea t u r es Adjusting the audio 2 Highlight Di gital A udio Selector , and then press the ENTER button. (Sample Image) Sound menu - Digital Audio Selector selection 3 Press the ( / arrow) buttons to select Au d i o , and then press the ( / arrow) b uttons to select the desired service.
86 Using t he TV’s fea t u r es Adjusting the audio T o listen to an alternate language on an A T SC digital station (if av ailable), high light the Language field in step 3 above, and then press the ( / arrow) b uttons to select th e language you prefer .
87 Using t he TV’ s fea t u r es Adjusting the audio Audyssey P r emium T elevision™ These televisions use a suite of technologies for better sound including: ❖ Audyssey EQ ® —pro vides clear , accurate and natural sound right out of the box.
88 Using t he TV’s fea t u r es Adjusting the audio When you use ColorStream ® H D or V ideo, switch the A V input mode appropriately . Selec t ing t he op t ical audio ou t pu t fo r ma t Y ou can.
89 Using t he TV’ s fea t u r es Using the Locks menu Using t he Locks menu The Locks menu includ es the Enabl e Rating Blocking, Ed it Rating Limits, Input Lock, Panel Lock, GameTi mer and New PIN Code features. Y ou can use these feature s after entering the correct PIN code.
90 Using t he TV’s fea t u r es Using par ental contr ols (for USA re gion) ❖ Use the Number buttons to ente r your four-digit code, and then press the ENTER button. If the wrong PIN code is entered, the message “Incorrect PIN code, please try again!” appears.
91 Using t he TV’ s fea t u r es Using par ental contr ols (for USA r e gion) 1 Press t h e MENU button and highlight the Locks menu icon. 2 Press the ( arro w ) button to display the PIN code entering screen. 3 Enter your four -digit PIN code, and then press the ENTER button.
92 Using t he TV’s fea t u r es Using par ental contr ols (for USA re gion) The currently tuned station must be receiving a digital signa l before an additional rating system can be downloaded.
93 Using t he TV’ s fea t u r es Using par ental contr ols (for USA r e gion) T o download the additional rating system, if av ailable: 1 Press t h e MENU button and highlight the Locks menu icon. 2 Press the ( arro w ) button to display the PIN code entering screen.
94 Using t he TV’s fea t u r es Using par ental contr ols (for USA re gion) ❖ The additional rating system can only be downloaded one time. Y ou will not be able to download any updates to the rating system should such updates become available.
95 Using t he TV’ s fea t u r es Using par ental contr ols (for USA r e gion) Independent rating system for movies: Indication other than rating system: If you place an “X” in the box next to “None” Rated, programs rated “None” or “Not Rated” will be blocked; Programs that do not provide any rating information will not be blocked.
96 Using t he TV’s fea t u r es Using par ental contr ols (for USA re gion) 3 Enter your four -digit PIN code, and then press the ENTER button. 4 Press the ( arro w ) button to highlight Enable Rating Blocking . 5 Press the ( arro w ) button to select On .
97 Using t he TV’ s fea t u r es Using the input lock featur e Unlocking p r og r ams t empo r a r ily If you try to tune to a program that exceeds the rating lim its you hav e set, the TV w ill enter pr ogram lock mode and a warning message appears on the screen.
98 Using t he TV’s fea t u r es Locking c hannels Locking channels W ith the Lock feature, you can lock specific channels. Locked channels can only be accessed by entering the PIN code, see “Entering the PIN code” o n page 89 . T o lock channels: 1 From the Set up menu, highl ight Installation , and then press the ENTER button.
99 Using t he TV’ s fea t u r es Locking c hannels Using t he GameTime r ® Y ou can use the GameT imer ® to set a ti me limit for playing a video game (30–120 minutes). When the GameTimer ® expires, the TV enters Input Lock mode and locks out the inpu t source for the video game de vice.
100 Using t he TV’s fea t u r es Using the PC settings featur e 5 Press the ( arro w ) button to select On . When the control panel is locked and any b utton on the control panel (except PO WER) is pressed, the message “NO T A V AILABLE” appears.
101 Using t he TV’ s fea t u r es Using the PC settings featur e If a computer is not connected or there is no PC input signal, this feature will be grayed out in the Setup menu. 4 Press the ( / arrow) buttons to select an item. 5 Press the ( / arrow) buttons to make the appropriate adjustments.
102 Using t he TV’s fea t u r es Using the Media Player 2 Highlight Audio Setup , and then press the ENTER b utto n. 3 Press the ( / arrow) buttons to select PC A udio , and then press the ( / arrow) b uttons to select No or Ye s . ❖ Ye s : When viewing the PC input, the audio from th e PC Audio input can be heard.
103 Using t he TV’ s fea t u r es Using the Media Player ❖ Gently insert the USB device into the port and do not remove while viewing Media Player . ❖ USB device: USB Mass Storage Class devic e (MSC) ❖ Connectivity is not guara nteed for all devices.
104 Using t he TV’s fea t u r es Using the Media Player If you repeatedly insert and remove the USB conne ctor , the prompt may not appear . 2 Press the ( / arrow) b uttons to select Ye s , and then press the ENTER button. The Media Player menu appears.
105 Using t he TV’ s fea t u r es Using the Media Player Viewing pho t o files There are three types of vie w mo des, multi v iew , single view , and slide show . Mul t i View This view allo ws you to search fo r photos in a grid format. These pictures are displayed using thum bnail data in each image file.
106 Using t he TV’s fea t u r es Using the Media Player ❖ Press to rotate the image 90° counterclockwi se. Press to rotate the image 90° clockwise. Slide show This view allo ws you to watch a slide show of the photos. In this mode, only files located in the se lected directory will be played.
107 Using t he TV’ s fea t u r es Using the Media Player 2 Select the desired folder and press the ENTER button to move to the next layer . Press the CH R TN b utton to move back to the previous layer . 3 W ith the desired file selected, press the ENTER button or the PLA Y button to start playback.
108 Using t he TV’s fea t u r es Using the Media Player 3 Select a music file and press the ENTER button to start playback. 4 Press CH R TN twice to mov e back to photo view mode.
109 Using t he TV’ s fea t u r es Setting the sleep timer During playback, you can adjust the SOUND menu functions from the Quick Menu. Sorting, T otal Time display may not be available in all c ases. Se tt ing t he sleep t ime r Y ou can set the sleep timer to turn off the TV after a set length of time (maximum of 12 hours).
110 Using t he TV’s fea t u r es Automatic P ower Down T o display th e time remaining until the TV turns off, press the SLEEP button. T o cancel the sleep timer , repeatedly press SLEEP until it is set to 0 minutes.
111 Using t he TV’ s fea t u r es Using HDMI® CEC 3 Press the ( / arrow) buttons to highlight the item you want to change, and press the ( / arrow) b uttons to select On or Off . ❖ Default setting for this feature is On. ❖ A warning message will appear 1 minute before the TV turns off.
112 Using t he TV’s fea t u r es Using HDMI® CEC HDMI® CEC Playe r Con tr ol menu func t ions T o control the HDMI® CEC player from the menu: 1 Press MENU and open the Pr eferences menu. 2 Highlight HDMI® CE C Player Contr ol and press the ENTER button.
113 Using t he TV’ s fea t u r es Using HDMI® CEC HDMI® CEC inpu t sou r ce selec t ion If a HDMI® CEC device with HDMI ® switching capability (e.
114 Using t he TV’s fea t u r es Displaying TV status information When you turn on the Audio Receiver , change its input s ource or adjust the sound volume, the sound will be output from the audio receiver’ s speakers even if TV Speakers has been se lected.
115 Using t he TV’ s fea t u r es Understanding the last mode memory featur e ❖ Digital signal strength indicator (bar graph in lower right corner of box; for A TSC signals only ) ❖ Stereo, Mono.
116 Chap t e r 7 Using the TV’ s Advanced Features Using t he advanced pic t u r e se tt ings Dynamic Con tr as t Dynamic Contrast detects changes in picture quality that af fect the appearance of your contrast settings and then automatically adjusts the video.
117 Using t he TV’ s Advanced Fea t u r es Using the advanced pictur e settings 4 Press the ( / arrow) b uttons to select High , Middle , Low or Off . S t a t ic Gamma The static gamma feature lets you ad just the lev els of black in the picture. T o adjust the static gamma settings: 1 Press t h e MENU bu tton and open the Pictur e menu .
118 Using t he TV’ s Advanc ed Fea t u r es Using the advanced picture settings T o select the color temperature: 1 Press t h e MENU bu tton and open the Pictur e menu . 2 Highlight Picture Settings , and then press the ENTER b utton. 3 Highlight Advanced Picture Sett ings , and then press the ENTER button.
119 Using t he TV’ s Advanced Fea t u r es Using the advanced pictur e settings 3 Highlight Advanced Picture Settings and press the ENTER button. 4 In the ClearFrame field, select On . 5 T o sav e the new settings, highlight Done and press the ENTER button.
120 Using t he TV’ s Advanc ed Fea t u r es Using the advanced picture settings CableClea r ® digi t al Noise Reduc t ion The CableClear ® digital Noise Reduction featu re allo ws you to reduce visible interference in your TV picture.
121 Using t he TV’ s Advanced Fea t u r es Using the advanced pictur e settings Game Mode Y ou can use the Game Mode featu re for shorter frame delays when you need split-second timing between the on- screen display and input fro m the contro ller (suc h as music creation and high-action game s).
122 Chap t e r 8 T roubleshooting Gene r al tr oubleshoo t ing Before calling a service technician, re vi e w this chapter or visit the T oshiba technical support W eb site at support.toshiba.co m for possible causes/solutions fo r the problem you are experiencing.
123 T r oubleshoo t in g Pictur e pr oblems Other pr oblems. If your TV’ s problem is not addresse d in th is T r oubleshooting section or the recommended solution has not worked, use the Reset F actory Defaults procedure, see “Resetting Factory Defaults” on page 59 .
124 T r oubleshoo t in g Pictur e pr oblems V ideo Input Selection pr oblems If the Input Selection window does not appear when you press INPUT on the remote control or TV , press INPUT a second time. This will cause a change to the next video input source and display the Input Selection window .
125 T r oubleshoo t in g Sound pr oblems Scrolling text pr oblem When slo w motion video is present the units w ill treat any scrolling text as f ilm and may cause a slight jitter of the scrolling text. T urning off the Film Stabil ization f eature will correct this issue, see “Film Stabilization (L5200 U Series)” on page 119 .
126 T r oubleshoo t in g Channel tuning pr ob lems Channel t uning p r oblems Ensure that the remote control is set to the correct device mode, see “Learning about the remote control” on page 43 . The Auto T uning featur e may ha ve erased the channel from memory .
127 T r oubleshoo t in g No HDMI® CEC operation No HDMI® CEC ope r a t ion The HDMI® CEC feature is av ailable for T oshiba HDMI® CEC compatible de vices.
128 Appendix A S pecifications ❖ These models comply with the specifications listed below . ❖ Designs and specifications are subject to change without notice. ❖ These models may not be compa tible with features and/or specifications that may be added in the future.
129 Specifica t ions P ower sour ce Powe r sou r ce 120V A C , 60 Hz Powe r maximum cu rr en t Powe r consump t ion Audio powe r 19L4200U 0.9 A 24L4200U 0.8 A 32L4200U 0.9 A 40L5200U 0.9 A 46L5200U 1.1 A 50L5200U 1.3 A 19L4200U 0.2 W in Standby mode 24L4200U 0.
130 Specifica t ions Speaker type Speake r t ype Video/audio t e r minals Video/audio inpu t Colo r S tr eam ® (componen t video) HD inpu t HDMI ® inpu t Digi t al audio ou t pu t Optical type PC inpu t 15-Pin D-sub Analog RGB 19L4200U T wo 3.7 x 1.
131 Specifica t ions Dimensions Dimensions Mass (weigh t ) Ope r a t ing condi t ions 19L4200U W idt h 1'-5 1/2” (445.8mm ) Height 1'-3/4” (324.5mm) Depth 7 ” (445.8mm) 24L4200U W idth 1 '-10 3/8” (567.52m m) Height 1'-2 1/4” (362.
132 Specifica t ions Supplied accessories Supplied accesso r ies ❖ Remote control with two size “ AAA” batt eries ❖ Wa r r a n t y ❖ Resource Guide ❖ Quick Start Guide ❖ Pedestal and har.
133 Specifica t ions Acceptable signal format s for PC IN, HDMI® ❖ Some illustrations in this User's Guide are for explanation purposes and may differ from the actual unit.
134 Appendix B License Agreement License Info r ma t ion on t he sof t wa r e used in t he TOSHIBA Digi t al TV The software pre-installed in the T OSHIBA Digital T elevisions consists of multiple, independent software components. Each software component is cop yrighted by TOSHIB A or a third party .
135 License Ag r eemen t implied. "W arranty" here includes, but not l imited to, an implied warranty for marketability or fitness for specif ic uses. All risks associat ed with the qual ity or performance of these software components are assumed by the user .
136 License Ag r eemen t (3) Permission for use of this software is granted only if the user accepts full responsibility for any undesirable consequences; the auth ors accept NO LIABILITY for damages of any kind. These conditions apply to any software deri ved fr om or based on the IJG code, not just to the unmodified library .
137 License Ag r eemen t This license was inspired by the BSD, Artistic, and IJG (Independent JPEG Group) licenses, which all encourage inclusion an d use of free software in commercial and fr eew are products alike. As a consequence, its main points are that: ❖ W e don't promise that this software works.
138 Index A advanced picture settings CableClear® digital Noise Reduction 120 Color temperature 117 Dynamic Contrast 116 MPEG Noise Reduction 120 Static Gamma 117 using 116 audio adjusting quality 86.
139 Index tuning channels 65 Channel Return switching between two channels 70 channels auto tuning 52 locking channels 98 skipping 55 specific channel 70 storing in memo ry 52 cinema mode selecting 78.
140 Index N no signal power down set 110 O overv iew installation 17 setup 17 use 17 P panel lock feature using 99 parental controls blocking programs/mo vies by rating (V -Chip ) 90 using 90 PC Audio.
141 Index T time zone setting 58 timer sleep timer 109 troubleshooting 122 channel tuning problems 126 closed caption problems 126 contact T oshiba 127 HDMI® 127 media player problems 127 No HDMI® C.
デバイスToshiba 24L4200Uの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Toshiba 24L4200Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba 24L4200Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba 24L4200Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba 24L4200Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba 24L4200Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba 24L4200Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba 24L4200Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba 24L4200Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。