Toshibaメーカー3540Cの使用説明書/サービス説明書
ページ先へ移動 of 50
MULTIFUNCTIONAL DIGITAL COLOR SYSTEMS / MULTIFUNCTIONAL DIGITAL SYSTEMS Network Fax Guide.
©2012 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this ma nual cannot be reproduced in any form withou t prior written permission of TTEC.
Preface 1 Preface Thank you for purchasing TOSHIBA Multifunctiona l Digital Syst ems or Multifunctional Digita l Co lor Systems. This manual explains the instructions for the N/W-Fa x driver . Read this manual before using your Multifunctional Digital Systems or Multifunctional Digital Color Systems.
2 Prefac e T rademarks y The official name of Windows XP is Microsoft Windows XP Operating System. y The official name of Windows Vista is Microsoft Windows Vista Operating System. y The official name of Windows 7 i s Microsoft Windows 7 Operating System.
End User Software License Agr eement 3 End User Sof tware License Agreement INST ALLING OR OTHERWISE USING THIS SOFTW ARE PRODUCT CONSTITUTES YOUR ACCEPT ANCE OF THE FOLLOWING TERMS AND CONDITIONS (UNLESS A SEP ARA TE LICENSE IS PROVIDED BY THE SUPPLIER OF APPLICABLE SOFTW ARE IN WHICH CASE SUCH SEP ARA TE LICENSE SHALL APPL Y).
.
CONTENTS 5 CONTENTS Preface ............... ............. ................ ................ ............. ................ ................ ............. ................. 1 End User Software License Agreement ............. ... ................ ......
6 CONTENTS.
1. OVER VIEW This chapter provides a n overview of the N etwork Fax features. Features and Functions ... ..............................................
1 OVERVIEW 8 Feat ures and Functions Features and Functions This equipment provides the network fax features, which simplify and facilitate your office facsimile needs and enables you to send fax or Internet Fax digital documents directly from your desktop.
2. SENDING A F AX This chapter describes how to send a fax using a N/W-Fax driver . Basic Procedure ......................................................... ..................................................... .. ..... 10 Specifying Reci pient s ...
2 SENDING A F AX 10 Basic Procedure Basic Procedure The basic procedure for sending a fax (Network Fax / Internet Fax) is as follows. Y ou can use standard functions or set optional functions as well as the basic ones described in th is section. F or these operations, see the followi ng section.
2.SENDI NG A F AX Basic Procedure 11 2 SENDING A F AX 4 Click the [Send] t ab and specify the recipient s. y T o specify recipien ts, enter them with the keyb oard or select them from the address book. P .14 “S pecifying Recipients” y On the [Send] t ab, you can set t he re solution of a fax cover sheet, etc.
2 SENDING A F AX 12 Basic Procedure 6 Click [Print] in the print dialog box on the app lication sof tware. A fax starts being sent. y Note that the co mmand name to print a do cument (s end a fax) may differ from [Print] depending on the application software.
2.SENDI NG A F AX Basic Procedure 13 2 SENDING A F AX In this case, specify th e desired LDAP server in t he [Server Name] box and click [OK] to send the fax.
2 SENDING A F AX 14 Specifying Recipients Specifying Recipient s Up to 400 recipients can be specified in a single opera tion. For equipment with no hard disk installed, up to 80 recipients can be specified in a single operation . T o send a Network Fax, specify th e fax number .
2.SENDI NG A F AX Specifying Recipients 15 2 SENDING A F AX y When you enter a fax number , you can al so enter a sub address and a password. Click [SUB/PWD] to enter them (within 20 digits each) in the dialog box.
2 SENDING A F AX 16 Specifying Recipients Selecting recipient s from the address book Select a recipient from the address book in th e AddressBook Viewer .
2.SENDI NG A F AX Specifying Recipients 17 2 SENDING A F AX A contact, for which only a fax number is registered, cannot be displayed in the “Selected Ema il” and a contact, for which only an Email address is registered , cannot be displayed in the “Selected Fax”.
2 SENDING A F AX 18 Specifying Recipients Selecting recipient s from the address book (Search option) Y ou can find and select a recipient from the add ress book in the AddressBoo k Viewer . 1 Click [Address Book]. The AddressB ook Vie wer runs. 2 Select [Find] from the [Edit] menu.
2.SENDI NG A F AX Specifying Recipients 19 2 SENDING A F AX 3 Select a registered direct ory service in [Dat a Source]. T o change the setting of the defaul t address book in the [Data Source] box, select [View] - [Default Configuration] - [Data Source] and then choose an address book.
2 SENDING A F AX 20 Specifying Recipients 5 Display the [Det ail Setting] tab, set the search condition, and then click [Add]. Field Select — Select an item to be searched. Condition of search string — Select a condi tion in the left-hand box, an d then enter a search string in the right- hand box.
2.SENDI NG A F AX Specifying Recipients 21 2 SENDING A F AX 7 Drag and drop the cont acts to “Selecte d Fax” or “Selected Email” from the list of the search result s. The selected recipients are listed in “Selected F ax” or “Selected Email”.
2 SENDING A F AX 22 Specifying Recipients 8 Click [OK]. The AddressBook Viewer is closed and the recipients selected for “T o” are displayed on th e list. When the fax transmission is comple ted, the recipients ar e automatically removed from the “T o” list.
3. SETTING OPTIONS This chapter describes how to set up options for the N/W-Fax driver . How T o Setup................................................................................... ................................ ....... 24 Setting Initial V alues of the N/W-Fax driver opti ons .
3 SETTING OPTI ONS 24 How To Setup How T o Setup There are two ways to set the N/W-Fax driver options: One is to set the initial values of the opt ions and the other is to set each option for each individual job. P .24 “Setting Initial V alues of the N/W-Fax driver options” P .
3 SETTING OPTIONS Setting up the N/W-Fax Driver Options 25 Setting up the N/W-Fax Driver Options N/W-Fax driver options are the attributes to define the way a fax job is transmitted. For example, you can specify the recipients, resolution, and paper size.
3 SETTING OPTI ONS 26 Setting up the N/W-Fax Driver Options Setting up the [Send] t ab In the [Send] tab, you can specify the re cipients and how the fax will be sent. 1) [Address Book] Click to launch the AddressBook Viewer . Y ou can select re cipients from the address book.
3.SETTING OPTIONS Setting up the N/W-Fax Driver Op tions 27 3 SETTING OPTIONS 8) Department Code Enter a department code of 1 to 63 characters if requ ired.
3 SETTING OPTI ONS 28 Setting up the N/W-Fax Driver Options Setting up the Cover Sheet Y ou can set the content of the co ver sheet to be attached to a fax. P .35 “Sending w ith a cover sheet” 1) Preview The image of the cover sheet can be previewed.
3.SETTING OPTIONS Setting up the N/W-Fax Driver Op tions 29 3 SETTING OPTIONS 7) Sender Information Check this to have the sender ’s information appear on the cover sheet. Y ou can en ter the information in up to 500 characters . 8) Subject Check this to have a subject appear on the cover she et.
3 SETTING OPTI ONS 30 Setting up the N/W-Fax Driver Options 2) SNMP V1/V2 Community Name — If a community name other than “private” (defau lt) is set for the SNMP communi ty name for your TOSHIBA MFP , enter its community name.
3.SETTING OPTIONS Setting up the N/W-Fax Driver Op tions 31 3 SETTING OPTIONS Setting up the [Device Settings] t ab On the [Device Settings] tab, you can ch ange a setting for N/ W-Fax driver update or display the software version of the driver . Ask the administrator for details on the se ttings configured for your TOSHIBA MFP .
3 SETTING OPTI ONS 32 Setting up the N/W-Fax Driver Options Setting up LDAP servers The [LDAP Server Settings] dialog box allows you to register LDAP servers. 1) [Up date Now] Click this button to obtain LDAP server information automatically from your TOSHIBA MFP , and register it in [Server Name List].
3 SETTING OPTIONS Sending With Extended Fa x Functionality 33 Sending With Extende d Fax Functionality The N/W-Fax driver allows users to perform the following fe atures. P .33 “Saving a fax as a file” P .34 “Delayed transmission” P .
3 SETTING OPTI ONS 34 Sending With Extended Fax Functio nality Delayed transmissio n When the delayed transmission is specified, the fax is stored in the fax queue in this equipment an d will be sent at the specified date and time. 1 Display the [Send] t ab and select the [Delayed Fax] check box.
3.SETTING OPTIONS Sending With Extended Fax Functionality 35 3 SETTING OPTIONS Sending with a cover sheet Y ou can choose to send a cover sheet with your fax transmission . The cover sheet is me rged with the recipient [T o] list data to create a fax cover sheet.
3 SETTING OPTI ONS 36 Sending With Extended Fax Functio nality 2 Enter the title of the cover sheet in the [Header T ext] box. Y ou can enter up to 63 characters for the header text.
3.SETTING OPTIONS Sending With Extended Fax Functionality 37 3 SETTING OPTIONS 4 If you want the recipient’ s information to appear on the cover sheet, selec t the [Recipient Information] check b ox and then select the optio ns required for the recipient information.
3 SETTING OPTI ONS 38 Sending With Extended Fax Functio nality 6 If you want a subject to appear on the co ver sheet, select the [Subject] check box a nd then enter the subject in the text box .
3.SETTING OPTIONS Sending With Extended Fax Functionality 39 3 SETTING OPTIONS 9 Select the desired one from each of the [Font], [Fo nt style], [Size] and [Script] boxes, and then click [OK]. The [Font] dialog box is closed and the font se ttings are d etermined for the se lected section.
3 SETTING OPTI ONS 40 Sending With Extended Fax Functio nality 11 Select an image file to be att ached and then click [Open]. The [Open] dialog box is closed and th e selected image file is attached. Attach the image file in a bitmap for mat (.bmp) w ithin 1 M B.
4. APPENDIX This chapter shows th e cover sheet samples. Cover Sheet Samples...................................... ..................................................... ................. .4 2 S tandard cover p age ... .............. .............. ...
4 APPENDIX 42 Cover Sheet Samples Cover Sheet Samples S t andard cover p age Reference Number: 0000000000000000 To : 00000000001 From: MFP-00C67861 Subject: N/W-Fax Document Message: This is a N/W -Fax Document.
4.APPENDIX Cover Sheet Samples 43 4 APPENDIX Business cover p age Reference Number: 0000000000000000 To : 00000000001 From: MFP-00C67861 Subject: N/W-Fax Document Message: This is a N/W -Fax Document.
4 APPENDIX 44 Cover Sheet Samples Professional cover pa ge Reference Number: 0000000000000000 To : 00000000001 From: MFP-00C67861 Subject: N/W-Fax Document Message: This is a N/W -Fax Document.
INDEX 45 INDEX A Add ............... ................. ................ ............. .............32 Address Book ..... ................ ................ .......... 16 , 18 , 26 AddressBook Viewer ........ ................ ............. ...... 16 , 18 Advanced .
46 INDEX.
FC-5540C/6540C/6550C FC-2040C/2540C/3040C/3540C/4540C DP-2095/2530/3020/3590/4590/5010 DP-5560/6560/7560/8560 FC-2050C/2550C FC-2051C/2551C OME100064C0.
2-17-2, HIGASHIGOT ANDA, SHINAGAW A-KU, TOKYO, 141-8664, JAP AN MUL T IFUNCTIONAL DIGIT AL COLOR SYSTEMS / MUL T IFUNCTIONAL DIGIT AL SYSTEMS Network Fax Guide ©2011, 2012 TOSHIBA TEC CORPORATION All.
デバイスToshiba 3540Cの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toshiba 3540Cをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba 3540Cの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba 3540Cの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba 3540Cで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba 3540Cを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba 3540Cの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba 3540Cに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba 3540Cデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
