Toshibaメーカー53AX62の使用説明書/サービス説明書
ページ先へ移動 of 56
Projection Television © 2002 TOSHIBA CORPORATION All Rights Reserved 53AX62 O WNER'S M ANUAL ® Owner's Record The model number and serial number are on the back of your TV. Record these numbers in the spaces below. Refer to these numbers whenever you communicate with your Toshiba dealer about this TV.
2 Child Saf ety It Makes A Diff er ence W her e Y our T V Stands Congratulations on y our purchase! As y ou enjoy y our new T V , keep these safety tips in mind: Th e Issue If you are like most Americans, you have a T V in your home. Many homes, in fact, have more than one T V .
3 Installation, Car e, and Service Installation F ollow these recommendations and precautions and heed all warnings when installing your T V: 15) Never modify this equipment. Changes or modific ations may void: a) the warranty , and b) the user ’ s authority to operate this equipment under the rules of the Federal Communications Commission.
4 Ground clamp Antenna discharge unit (NEC Section 810-20) Grounding conductors (NEC Section 810-21) Power service grounding electrode system (NEC Art 250 Part H) Ground clamps Antenna lead-in wire Electric service equipment QUALIFIED SERVICE TECHNICIAN 23) Always operate this equipment from a 120 V AC, 6 0 Hz power source only .
5 Important Safety Inf ormation ............................. 2-4 Introduction ................................................................ 6 W elcome to T oshiba ......................................................... 6 E xploring your new TV .
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 6 MENU VOL VOL CH CH EXIT TV/VIDEO DEMO POWER Intr oduction W elcome to T oshiba Congratulations! Y ou have purchased one of the finest projection TVs on the market.
7 Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Connecting a VC R This connection allows you to watch local channels and video programs, play or record on the VCR while watching TV , and record from one channel while watching another channel.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 8 Connecting a cable conv erter box This connection allows you to watch cable and pr emium channels. To use the TV’ s features, select ANT -1.
9 Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Connecting a DV D play er/satellite receiv er and a VC R This connection allows you to watch D VD/satellite, V CR, and TV programs, and recor d one channel while watching another channel.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 10 Connecting a DV D play er with ColorStr eam ® (component video) and a VC R This connection allows you to watch D VD, V CR, or TV programs, and recor d TV programs.
11 Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Connecting a camcor der This connection allows you to watch video materials r ecorded on a camcorder .
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 12 Connecting an A/V r eceiver If you use a system that delivers D olby Pro Logic* surr ound sound, you may want to use the TV speakers as center channel speakers.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 13 Using the r emote control Pr eparing the remote contr ol for use Y our T oshiba remote control has one dedicated TV mode and 5 universal modes: V CR, Cable/SA T , DVD, A udio1, and Audio2.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 14 Remote control functional key chart K ey Label T oshiba TV Cable Satellite V.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 15 DISC AM/FM --- --- --- --- Disc shift AM/FM Disc shift Deck side A/B switch ST OP .
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 16 Pr ogramming the r emote contr ol for use with y our audio/video devices Device code setup 1. Refer to the Device code table on pages 18–21 to find the code for the brand of your device.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 17 V erifying the device code (9 90) U se this feature to verify the device codes currently programmed in the remote control. The number of blinks after pressing the 1, 2, 3, and 4 buttons is the 4-digit code set up for that mode.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 18 Cable box setup codes Brand name Code number ABC 0020, 0022, 0026, 0027, 003.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 19 VCR setup codes Brand name Code number A dmiral 0067, 0228 Adv entura 0019 Aiko 02.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 20 DVD setup codes Brand name Code number Aiwa 0660 Denon 0509, 0653 GE 0541 Ha.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 21 Amplifier setup codes Brand name Code number Aiwa 0425 Carver 0288 Cur tis Mathes .
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 22 Learning about the r emote control Only the buttons used to operate the TV are described her e.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 23 Setting up y our T V Learning about the menu system After you have installed the batteries and programmed the r emote control, you will need to set some pr eferences on the TV using the menu system.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 24 MENU VOL VOL CH CH EXIT TV/VIDEO DEMO P Changing the on-scr een display language Y ou can choose fr om three different languages (English, F rench and S panish) for the on-scr een displays.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 25 Adding channels to the TV’s memory When you press Channel yz , the TV will cycle through only the channels stored in the TV ’ s channel memory .
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 26 Adding and erasing channels manually After you have automatically programmed channels into the TV ’ s memory (see page 25), you can manually add or erase individual channels.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 27 Adjusting the color conv ergence This projection TV uses three separate TV tubes: red, green, and blue. The red, green, and blue images ar e projected onto the screen where they converge to form a full-color picture.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 28 Using the T V’s f eatures Adjusting the channel settings Switching between tw o channels Y ou can switch between two channels without entering an actual channel number each time.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 29 To clear a favorite channel: 1. Pr ess MENU, and then press x or • until the CUST OM menu appears. 2. P ress y or z to highlight F A VORITE CH2, for example.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 30 6. Repeatedly press x or • to select a character for the first space, and then press ENTER.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 31 W atching picture-in-pictur e (P I P) The picture-in-picture (P IP) feature allows you to watch two pictur es at the same time. The smaller (PIP) pictur e can come from a TV broadcast or an external source, such as a VCR.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 32 Switching the main and PI P pictures Pr ess SW AP while you are using the PIP feature to switch the main and PIP pictures. The main and PIP pictures will switch each time you press the SW AP button.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 33 Notes: •W hen the main picture source is ColorStream, the I N FO, FA VO R ITE, and MUL TI functions are not available. •T he IN F O button will not work when ANT 2 mode is selected.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 34 Using the LOC KS menu The LOCKS menu includes the V -CHIP , CH Lock, Video Lock, and Ne w PIN Code functions. Y ou can use these functions after entering the correct PIN code.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 35 Using the V -CH I P menu S ome TV programs and movies include signals that classify the content of the program (violence, sex, dialog, language).
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 36 MP AA RA TI N G (Independent r ating system for movies) 1. F rom the LOCKS menu, select MP AA RA TING. 2. P ress x or • to display the MP AA RA TING menu, and then press z or y to highlight MP AA RA TING (below left).
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 37 Unlocking progr ams temporarily If you try to watch a TV program that exceeds the rating limits you set, the TV will enter the program lock mode.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 38 To unlock a channel: 1. F rom the LOCKS menu, select CH LOCK. 2. P ress x or • to display the CH LOCK menu. CH INPUT will be highlighted.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 39 Adjusting the pictur e Selecting the pictur e mode Y ou can select y our desired picture type from four pr eset picture modes: sports, standard, movie, and pr eference.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 40 Saving your new pictur e pref erences Y ou can sav e the PICTURE qualities you adjusted (contrast, brightness, color , tint, and sharpness) in the picture PREFERENCE mode.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 41 Selecting the color temper ature Y ou can change the quality of the pictur e by selecting from three preset color temperatures: cool, medium, and warm.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 42 W atching video input To vie w a signal from another device connected to the TV (such as a V CR or DVD play er), press INPUT on the remote control (or TV/VIDEO on the TV) to change the video input (see illustrations below).
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 43 Using the closed caption f eature The closed caption feature has two options: • Captions—A printed version of the dialogue, narration and/or sound effects of a program.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 44 Setting the sleep timer Y ou can use the sleep timer to turn the TV off automatically . To set the sleep timer: 1. P ress SLEEP .
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 45 Adjusting the sound Muting the sound Pr ess MUTE to temporarily reduce (1/2 mute) or turn off (mute) the sound. The screen will display “1/2 MUTE” or “MUTE” in the lo wer right corner .
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 46 Using the surround sound f eatur e The surround sound feature expands the audio listening field wider and deeper to create exceptional sound quality fr om the TV ’ s speakers.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 47 Adjusting the sound quality Y ou can change the quality of the TV ’ s sound by adjusting the bass, treble, and balance. To adjust the sound quality: 1.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 48 Using the sub-bass system (SB S) The sub-bass system allows you to enhance the TV ’ s bass performance (even when the volume is low).
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 49 Selecting the Audio OUT sound This feature allows you to select the sound (MAIN or P IP) that is output from the A udio OUT jacks.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 50 Selecting the backgr ound of the menu display Y ou can change the backgr ound of the menu display by selecting from two preset types: shaded and solid (gray).
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 51 Understanding the auto pow er off featur e The TV will automatically turn off after approximately 15 minutes if it is tuned to a vacant channel or a station that completes its broadcast for the day .
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 52 Television System NTSC standard Channel Coverage VHF: 2 through 13 UHF: 14 t.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 53 Tr oubleshooting Before calling a service technician, please check the following table for a possible cause of the pr oblem and some solutions.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix Index 54 Limited United States W arr anty for 27'' FST PURE ® and All Larger Television Models T oshiba America Consumer Products, Inc.
Introduction Connecting y our TV Using the Remote Control Setting up y our TV Using the TV’s F eatur es Appendix 55 T oshiba of Canada Limited (“T C L ”) makes the following limited warranties to original consumers in Canada.
(02-08) B HEAD OFFICE/191 McNABB STREET MARKHAM, ONTARIO L3R 8H2, CANADA TEL: (905) 470-5400 SERVICE CENTERS/TORONTO: 191 McNABB STREET MARKHAM, ONTARIO L3R 8H2, CANADA TEL: (905) 470- 5400 MONTREAL: 1643, NORTH SERVICE RD., TRANS-CANADA HIGHWAY, DORVAL QUEBEC, H9P 1J1, CANADA TEL: (514) 856-4100 VANCOUVER: 22171 FRASERWOOD WAY, RICHMOND, B.
デバイスToshiba 53AX62の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toshiba 53AX62をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba 53AX62の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba 53AX62の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba 53AX62で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba 53AX62を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba 53AX62の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba 53AX62に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba 53AX62デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
