Toshibaメーカー62HM196の使用説明書/サービス説明書
ページ先へ移動 of 92
HM196 (E/F) Web 21 3:276 HIGH -DEFINITION TELEVISION 62HM196 72HM196 I S O 1 4 0 0 1 F I L E N o . A 9 6 4 5 T O S H I B A A M E R I C A C O N S U M E R P R O D U C T S , L .
2 HM196 (E/F) Web 21 3:276 Important notes about your DLP ™ projection TV 1) The light source for this TV is a projection lamp unit with a limited service life.
3 HM196 (E/F) Web 21 3:276 Trademark Information • This product incorporates copyrig ht protection technology that is protected by U.S. p atents and other intellectual pro perty rights.
HM196 (E/F) Web 21 3:276 4 Contents Important notes about your DLP ™ projection TV . . . . . . . . . . . 2 Trademark Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Chapter 1: Introduction . . . . . . . . . . . . . . . . . . . .
HM196 (E/F) Web 21 3:276 5 Chapter 7: Using the THINC ™ home network feature . . . . . . . . 57 A. Connecting the TV to your home network . . . . . . . . . . . 57 B. Setting up the netw ork addr ess . . . . . . . . . . . . . . . . . . . . 57 Automatically setting up the network address .
6 HM196 (E/F) Web 21 3:276 Chapter 1: Introduction Welcome to Toshiba Thank you for purchasing this Toshiba TV, one of the most innovative DLP ™ projection TVs on the market.
7 HM196 (E/F) Web 21 3:276 Chapter 1: Introduction Overview of steps for installing, setting up, and u sing your new TV Follow these steps to set up your TV and beg in using its many exciting features. 1 Carefully read the important sa fety, installation, care, and service information in th e separate Installation Guide .
8 HM196 (E/F) Web 21 3:276 Chapter 1: Introduction TV front and side panel controls and connections LAMP POWER TIMER REC 1 2 3 4 5 6 8 7* 11 10 9 Side panel TV front Control panel 1 Remote sensor (behind the screen) — Point the remote control toward this area of the TV screen ( - “Remote control effective range” on page 11).
9 HM196 (E/F) Web 21 3:276 Chapter 1: Introduction TV back panel connections For an explanation of cable types and connections, see the Installa tion Guide . 12 3 4 5 6 1 VIDEO 1 IN — Composite video and anal og audio inputs plus optional S-video inputs fo r connecting devices with composite video or S-video output.
10 HM196 (E/F) Web 21 3:276 Chapter 1: Introduction 11 9 10 8 7 7 HDMI ™ 1 IN and HDMI ™ 2 IN — Two High-Definition Multimedia Interface inputs receive digital audio and uncompressed digital video from an HDMI device or uncompressed digital video from a DVI device.
11 HM196 (E/F) Web 21 3:276 Chapter 2: Using the remote control Installing the remote control batteries To install the remote control batte ries: 1 Slide the battery cover off the back of the remote contr ol. 2 Install two “AA” size alkaline batteries.
12 HM196 (E/F) Web 21 3:276 Chapter 2: Using the remote control Learning about the remote control The buttons used for operating the TV only are described here. For a complete list of the remot e control’s functions, see the remote control functional key chart ( - pages 14–15).
13 HM196 (E/F) Web 21 3:276 Chapter 2: Using the remote control 16 EXIT closes on-screen menus and the TV Guide On Screen ™ system. 17 INFO provides detail ed information o n highlighted item s in the TV Guide On Screen ™ system ( - TV Guide On Screen ™ Interactive Program Guide ).
14 HM196 (E/F) Web 21 3:276 Chapter 2: Using the remote control Remote Control f unctional key chart REMOTE CONTROL KEY Toshiba TV (TV) CABLE SAT (satellite) VCR • DVD/VCR combo • DVD/ DVD-R Recei.
15 HM196 (E/F) Web 21 3:276 Chapter 2: Using the remote control Note: • “---” = key does not send a signal in that remote control mode. • “ s TV” = key will affect the TV, even though the remote control is in another mode. • * Not available for your TV.
16 HM196 (E/F) Web 21 3:276 Chapter 2: Using the remote control Using the remote control to operate your other devices Your TV remote control has one dedicated TV mode and three programmable multi-bran d modes: CABLE/SA T , DVD , and VCR/PVR . The default device modes and programmable device modes are listed below.
17 HM196 (E/F) Web 21 3:276 Chapter 2: Using the remote control 5 To control the TV, press the “TV” mode sel ect button. Note: • Although the TV remote control inclu des codes for many devices, it may not include codes for some or all of the features on certain devices you want to con trol.
18 HM196 (E/F) Web 21 3:276 Chapter 2: Using the remote control Multi-brand remote control device codes TVs Cable boxes Satellite receivers DVDs Brand Code Toshiba 1524 Brand Code ABC 0003, 0008 Ameri.
19 HM196 (E/F) Web 21 3:276 Chapter 2: Using the remote control VCRs JBL 0702 JSI 1423 JVC 0558, 0623 , 0867, 1164 jWin 1049, 1051 Kawasaki 0790 Kenwood 0490, 0534 KLH 0717, 0790 , 1020, 1149 Konka 07.
20 HM196 (E/F) Web 21 3:276 Chapter 2: Using the remote control PVRs Cable/PVR Combo DBS/PVR Combo (1) DBS/PVR Combo (2) Mitsubishi 0043, 0061, 0067, 0075, 0173, 0807 Motorola 0035, 0048 MTC 0000, 024.
21 HM196 (E/F) Web 21 3:276 Chapter 2: Using the remote control Audio Amp CD players Audio Amp/Tuners Brand Code Adcom 0577, 1100 Bose 0674 Carver 0892 Durabrand 156 1 Elan 0647 GE 0078 Harman/Kardon .
22 HM196 (E/F) Web 21 3:276 Chapter 3: Menu layout and navigation Main menu layout The tables below and on the next page provide a quick overview of your TV’s men u system. To open the main menus (illust rated below), press Y on the rem ote control or TV control panel.
23 HM196 (E/F) Web 21 3:276 Chapter 3: Menu layout and naviga tion Setup/Installation menu layout The Installation menu contains the Terr estrial, Network, TV Guide On Screen ™ Setup, Time and Da te, and System Status menus.
24 HM196 (E/F) Web 21 3:276 Chapter 3: Menu layout and naviga tion THINC menu layout The THINC menu wi ll not be p art of the mai n menu, but will be viewable by pressing C on the remote control.
25 HM196 (E/F) Web 21 3:276 Chapter 4: Setting up your TV Selecting the menu language You can choose from three different languages (English, French, and Spanish) for the on-screen disp lay of menus and messages. Note: The TV Guide On Scree n ™ menus are in English, regardless of the lan guage selected in thi s menu.
26 HM196 (E/F) Web 21 3:276 Chapter 4: Setting up your TV Programming channels into the TV’s channel memory When you press < or , on the remote cont rol or TV contro l panel, your TV will stop only on the channels you programmed into the TV’s channel memor y.
27 HM196 (E/F) Web 21 3:276 Chapter 4: Setting up your TV Manually adding and deleting channels in the channel memory After automatical ly programmin g channels into the channel memory, you can manually add or delete ind ividual channels. To add or delete channels in the ch annel memory: 1 Press Y and open the Setup menu.
28 HM196 (E/F) Web 21 3:276 Chapter 4: Setting up your TV Setting the time and date Note: If you already set up the TV Guide On Screen ™ system, the time and date were set automati cally and you can skip this step. To set the time and date: 1 Press Y and open the Setup menu.
29 HM196 (E/F) Web 21 3:276 Chapter 4: Setting up your TV Setting the HDMI ™ audio mode To set the HDMI audio mode: 1 Press Y and open the Setup menu. 2 Highlight HDMI 1 Audio (or HDMI 2 Audio ) and press c . 3 Press b or B to select the HDMI audio mode ( Auto , Digital , or Analog ) and press T .
30 HM196 (E/F) Web 21 3:276 Chapter 4: Setting up your TV Setting the Quick Restart ™ feature With the Quick Restart ™ feature set to On , the TV wi ll stay in Standby mode for several minut es after the TV is turned off (see Note below). If the TV is turned on from Standby mode, the full picture appears immediately.
31 HM196 (E/F) Web 21 3:276 Chapter 4: Setting up your TV Viewing the system status To view the system status: 1 Press Y and open the Setup menu. 2 Highlight In stallatio n and press T . A new set of Installation menu icons wi ll appear, as shown below right.
32 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Selecting the video input source to view To select the video i nput source to view: 1 Press + on the re mote control or TV contro l panel.
33 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Input labeling example: The screen below left shows the default Input Selection screen (with none of the inputs labeled as a specific device).
34 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features To set up the Channel Browser ™ : 1 Press Y and open the Preferences menu. 2 Highlight Channel Browser Setup and press T . 3 Press B to highlight Navigation , and then press C or c to select either Browse Mode or Select Mode .
35 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features To tune to a channel or input in Select mode: 1 While watching TV, press 3 C or # c to open the Channel Browser ™ banner and surf back to a previous item or surf forward to the next it em in the list.
36 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Switching between tw o channels using Channel Return The Channel Return feature allo ws you to switch be tween two channels without entering an actual channel number each time. 1 Select the first channel you want to view.
37 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Selecting the picture size You can view many progra m formats in a variety of picture sizes— Natural , Theate rWide 1 , The aterWi de 2 , TheaterWide 3 , and Full . Note: The “picture size” illustrations are examples only.
38 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features TheaterWide 3 picture size (for letter box programs with subtitles) • The picture is stretched wider to fill the width of the screen, but only slightly stretched taller. • The top and bottom edges are hidden.
39 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Using the auto aspect ratio feature When the auto aspect ratio feature is set to On , the TV will automatically sel ect the picture size when one of the following input sources is received: • A 480i signal from the VIDEO 1 , VIDEO 2 , ColorStream HD-1 , or ColorStream HD-2 input.
40 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Using the POP features Using the POP doubl e-window feature The POP (picture-out-pict ure) double-window feat ure splits the screen into two windows so you can watch two programs at the same time.
41 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Switching the speaker audio (left or right) While the POP window is open, press C or c to switch the audio (left or right) that is ou tput from the TV speakers (and also from the VARIABLE AUDIO OUT terminals).
42 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Adjusting the picture Selecting the picture mode You can select your desired picture settings from four di fferent modes, as described below. To select the picture mode: 1 Press Y and open the Video menu.
43 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Using the closed caption mode The closed caption mode has two options: • Captions—An on-screen d isplay of the dialogue, narration, and sound effects of TV programs and videos that are cl osed captioned (usually m arked “CC” in program guid es).
44 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Digital closed captions You can use the Digital CC /Audio Selector to select digital closed caption services (if ava ilable), which will t emporarily override closed captions for digital channels only.
45 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Selecting stereo/SAP broadcasts The multi-channel TV sound (MTS) feature allows you to output high-fidelity stereo sound. MTS also can transmit a second audio program (SAP) containing a second language, music, or other audio information (wh en provided by individual stations).
46 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Using the StableSound ® feature The StableSound ® feature limits the highest volume level to prevent extreme changes in vo lume when the signal source changes (for example, to pr event the sudden increase in volume that often happens when a TV program switches to a commercial).
47 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Using the Locks menu The Locks menu includes the Enable Rating Blocking, Edit Rating Limits, Channels Block, Input Lock, Front (control) Panel Lock, and New PIN Code features. You can use these features after entering the correct PIN code.
48 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Blocking TV programs and movies by rating (V-Chip) Some TV programs and movies include signals that classify the content of the program (viole nce, sex, dialog, lang uage). The V-Chip feature in this TV detects the signals and blocks the programs according to the ra tings you select.
49 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Note: • If you place an “ 5 ” in the box next to “ ‘None’ Rated ,” programs rated “ None ” will be blocked; however, programs that do not provide any rating informa tion will not be blocked.
50 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features To unblock all locked channels at once: Highlight Allow Al l in step 6 on the previous page, and then highlight Done and press T .
51 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Using the GameTimer ™ You can use the GameTim er to set a time limit for play ing a video game (30–120 minutes). When the GameTim er is activated, the TV enters Input Lock mode and locks out the input source for the video game device.
52 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Setting the sleep timer You can set the sleep timer to tu rn off the TV after a set length of time (maximum of 180 minutes). To set the sleep timer: Press [ on the remote control to set the length of time un til the TV turns off.
53 HM196 (E/F) Web 21 3:276 Chapter 5: Using the TV’s features Displaying TV status information using RECALL To display TV status information on-screen: Press E on the remote contro l. The following i nformation w ill display on-scr een (if applicable): • Current input ( ANT 1 , ANT 2 , VIDEO 1 , etc.
54 HM196 (E/F) Web 21 3:276 Chapter 6: Using the TV’s advanced features Using the advanced picture settings features Using dynamic contrast When dynamic contrast is set to On , the TV will detect changes in the picture quality that affect th e appearance of your contrast settings and then autom atically adjust the video.
55 HM196 (E/F) Web 21 3:276 Chapter 6: Using the TV’s advanced features Using MPEG noise reduction The MPEG noise reduction feature al lows you to redu ce visible interference caused by MPEG compression. Choices for MPEG noise reduction are Off , Low , Middle , and High .
56 HM196 (E/F) Web 21 3:276 Chapter 6: Using the TV’s advanced features Using the Game Mode feature You can use the Game Mode feature for shorter frame delays when playing a video game requiring spl it-second timing between the on-screen display and input from the controller (such as music creation and high-action games).
57 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature The Toshiba Home Interactive Network Connection ( THINC ™ ) feature allows you to c onnect the TV to your h ome network, which will enable access to file sharing and e-mail scheduling features.
58 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature 5 The message “Obtain networ k address automatically?” will display. Highlig ht Yes and press T . 6 The message “Please wait…” will d isplay while the TV is attempting to load the netwo rk address inform ation from the DHCP server.
59 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature 8 Press b to highlight the Gateway (Router) field, and then use the Number buttons to input the Gatew ay (Router) address. 9 Press b to highlight the DNS (Domain Name Server) field, and then u se the Number buttons to i nput the DNS address.
60 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature 2 In the Properties window for the selected folder: Note: If the “Sharing” tab on your specific PC looks like the one illustrated below (with no “Pe rmissions” button), follow the steps below.
61 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature 4 In the Properties window: 5 The shared folder will displa y with a “shared folder” icon (a hand holding a folder). 6 Go to section D, “Setting up file sharing on the TV” at right.
62 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature 7 Press Bb to highlight either JPEG Picture Direct ory or MP3 Music Directory . Note: The first time you highlight either of these fields, the message “Please Wait...” will appear until the field is populated with the files i n your PC’s shared folde r(s).
63 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature E. Viewing/playing shared files on the TV You can use the Picture Viewer to view compatible JPEG- format photos on your TV’s screen. You can use the Audio Player to play compatible MP3 files on the TV.
64 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature Networked PC specifications Maximum number of files per shared folder: – JPEG = 1,000 • All JPEG files over the 1,000th in a shar ed folder will no t display. – MP3 = 200 • All MP3 files over the 2 00th in a shared folder will not play.
65 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature Viewing JPEG files on th e TV 1 After accessing your JPEG file s from your networked PC ( - page 64), the images auto matically display on-screen, with one as a large picture and six in thumbnail form at.
66 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature Using the Audio Player You can use the TV’s Audio Pla yer to listen to MP3 files on the TV. Note: • Make all desired ad justments to the TV ’s audio features (e.g., surroun d, bass, treble, balance) before starting the Audio Player .
67 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature F. Setting up e-mail scheduling You can remo tely schedule and delete recordings and reminders via e-mail to the TV from any PC. Note: • If you have not already done so, follow the instructions in sections A and B ( - page 57), before proceeding.
68 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature 6 When you are finished entering all characters for the selected field, highlight Done and press T . 7 Highlight Test and press T to test the e-mail setup. During testing , the TV will display th e message “Testing E-mail”.
69 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature Setting up SMTP authentication If your e-mail provider does no t allow unknown e-m ail clients to send e-mail throug h t.
70 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature “TESTING E-MAIL” ERROR CODES Code Description Solu tions –1 The TV was able to connect to the e-mail server(s) but not log on. • If you receive the message “Error Se nding Mail (–1)”, the TV may not have received the test e-mail.
71 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature Description of fields in the “E-mail Scheduling Setup” window For instruction s on entering data in these fields, see step 5 under “Setting up e-mail scheduling” ( - page 67).
72 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature Security settings ( Results of various setting combinations when the “ E-mail Schedulin g ” field i s set to ON in the “ E-mail Scheduling Setup ” window ) * The “ High ” settings are the default settings.
73 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature G. Using e-mail scheduling You can use the e-mail sche duling feature to schedule and delete recordings and reminders by sending a “req uest e-mail” to the TV’s e-mail address from any PC.
74 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature Tag and data formats The data for each tag can be fo rmatted in various ways, as described in the following table: * The ID is case sensitive. The ID tag is required only if you created an ID in the “ID” field and set the “ID Required” field to On.
75 HM196 (E/F) Web 21 3:276 Chapter 7: Using the THINC ™ home network feature DELETE request e-mail The DELETE request allows you to cancel an existing scheduled recording or reminder.
76 HM196 (E/F) Web 21 3:276 Chapter 8: Troubleshooting General troubleshooting Before calling a service technician, please check this chapter for a possible cause of the p roblem and some solu tions you can try. Black box on screen • The Closed Caption feature is set to one of the Text modes ( T1 , T2 , T3 , or T4 ).
77 HM196 (E/F) Web 21 3:276 Chapter 8: Troubleshooting Picture brightness chan ges soon after turn ing on TV • If you set the lamp mode to Low Power , each time you turn on the TV, the lamp will start out in High Bright mode but will switch to Low Power mode after a short period of time.
78 HM196 (E/F) Web 21 3:276 Chapter 8: Troubleshooting Recording problems • If you use the TV’s remote control to start recording, you will not be able to change inputs ( - page 32), open the POP window ( - page 40). If you attempt to do so, the message “Not Available While Recording” will appear on-screen.
79 HM196 (E/F) Web 21 3:276 Chapter 8: Troubleshooting Automatic se tup fails • The Ethernet cables are not connected properly or at all. Connect all cables( - Installation Guide ). • The DHCP service is not enabled on the router, or no router is present.
80 HM196 (E/F) Web 21 3:276 Chapter 8: Troubleshooting LED indications The yellow, blue, and red/ green LED lights o n the TV (at the bott om center of the TV ) indicate the TV’s status, as described be low.
81 HM196 (E/F) Web 21 3:276 Chapter 9: Appendix Lamp unit replacement and care Replacing the lamp unit (User-replaceable component) The light source for this TV is a mercury lamp wi th internal atmospheric pressure that increases during use. The lamp has a limited service life that va ries depending on product use and user settings.
82 HM196 (E/F) Web 21 3:276 Chapter 9: Appendix How to replace the lamp unit Required tools : • Manual screwdrivers (Phil lips and slotted) • Soft, lint-free gloves • Optional tool: 5/16" nu t driver 1 Turn off the TV and unplug the power cord.
83 HM196 (E/F) Web 21 3:276 Chapter 9: Appendix Note: • Never subject th e lamp unit to excessive shock. • Never touch the lamp unit glass or otherwise get it dirty. Doing so may affect the image quality and reduce the service life of the lamp. See “Cleaning the lamp unit glass” below.
84 HM196 (E/F) Web 21 3:276 Chapter 9: Appendix Specifications Note: • This model complies with the specification s listed below. • Designs and specifications are subject to change without notice. • This model may not b e compatible with features an d/or specifications th at may be added in th e future.
85 HM196 (E/F) Web 21 3:276 Chapter 9: Appendix Limited United St ates Warranty for DLP ™ Television Models Toshiba America Consume r Product s, L.L.C. (“TACP”) makes th e following limited warranties to original consumers in the United Sta tes.
86 HM196 (E/F) Web 21 3:276 Chapter 9: Appendix Limited Canada Warranty for DLP ™ Television Models Toshiba of Canada L imited (“TCL”) ma kes the following li mited warranties to original consumers in Cana da.
87 HM196 (E/F) Web 21 3:276 Chapter 9: Appendix A copy of the GPL source code in this product may be obtained b y contacting Toshiba Consumer Solution s at (800)631-3811.
HM196 (E/F) Web 21 3:276 88 Index A Account .......................................... 67 Antenna input configuration ............ 25 Audio pl ayer ................................... 66 Audio quality adjustments ............... 45 Auto aspect .......
HM196 (E/F) Web 21 3:276 89 Notes HM196_EN.book Page 89 Tuesday, May 30, 2 006 2:18 PM.
HM196 (E/F) Web 21 3:276 90 Notes HM196_EN.book Page 90 Tuesday, May 30, 2 006 2:18 PM.
HM196 (E/F) Web 21 3:276 91 Notes HM196_EN.book Page 91 Tuesday, May 30, 2 006 2:18 PM.
Corporate Headquarters: 82 TOTOWA ROAD, W A YNE, NJ 07470, U.S.A. NA TIONAL SERVICE DIVISION: 1420-B TOSHIBA DRIVE, LEBANON, TN 37087, U.S.A. PRINTED IN USA (06-06) CableClear , ColorStream, StableSound, and TheaterWide are r egistered trademarks of T oshiba America Consumer Products, L.
デバイスToshiba 62HM196の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Toshiba 62HM196をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba 62HM196の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba 62HM196の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba 62HM196で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba 62HM196を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba 62HM196の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba 62HM196に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba 62HM196デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。