Toshibaメーカー705Tの使用説明書/サービス説明書
ページ先へ移動 of 315
1 Introduction Thank you for purchasing the Vodafone 705T handset. • T o ensure proper usage, read this manual thoroughly before using the 705T handset. • After reading this manual, retain it for future reference. • If this manual is lost or damaged, contact Vodafone General Information (page 315).
2 What's in the Box 7 In addition to the above items, optional items such as a cigarette lighter charger , video output cable and stereo earphone-micr ophone with audio remote control are available. For details, contact your nearest V odafone Shop or Vodafone General Information (page 315).
3 Contents Introduction ........................................... 1 What's in the Box ................................... 2 Contents ................................................ 3 About this Manual .................................. 5 Keys & Notations .
4 12 Appendix ......................................... 294 Default Settings ................................. 295 T roubleshooting .................................. 302 Storage Capacity ................................ 304 Main Specifi cations ....
5 About this Manual .FTTBHJOH 4 . 4 "CPVU 4.4 5IF4IPSU.FTTBHF4FSWJDF4.4BMMPXTZPVUPFYDIBOHFUFYUNFT TBHFXJUIPUIFS IBOETFUT'PSEFUBJMTPO4.4 DPOUBDU7PEBGPOF(FOFSBM*OGPSNBU JPOQBHF $SFBUJOH4FOEJOHBO4.
6 Keys & Notations Soft Keys Press soft keys to perform operations indicated at the bottom of the main display . • Press J to access Options menu. • Press K to return to the previous window . Navigation Key The following notations are used to indicate Navigation Key operations.
7 • T o ensure proper usage, be sure to read the Safety Precautions thoroughly before using your handset. Always keep this manual available for future reference.
8 Limitation of Liability ・ Vodafone and T oshiba accept no liability whatsoever for any damages arising from natural disasters such as earthquakes, lightning, storms and fl oods, as well as fi re.
9 Do not expose the handset, charger, battery pack or Stereo Handsfree Headset to fl uids such as water, perspiration or seawater Doing so may cause overheating, rupturing, fi re, electric shock or malfunction.
10 Do not charge the battery pack while it is wet or damp Doing so may cause overheating, rupturing, fi re, electric shock or short circuit. If the battery pack is exposed to fl uids such as water, unplug the rapid charger immediately.
11 Do not use the handset with any power voltage other than the specifi ed voltage Doing so may cause a fi re. The power voltages are 100 to 240 V AC for the rapid charger and 12 or 24 V DC (for a negative ground car only) for a cigarette lighter charger.
12 If something unusual happens to the handset, battery pack or charger; for example, it emits smoke or an unusual odour or is damaged, perform the following steps immediately 1. If the battery pack is charging, unplug the rapid charger from the AC household outlet or unplug the cigarette lighter charger from the cigarette lighter socket.
13 4. When using electronic medical devices other than an implanted cardiac pacemaker or defi brillator outside of medical institutions (such as at home), consult with the individual medical device manufacturer about the possible infl uence of radio waves.
14 Do not use or leave the handset or battery pack in places where it will be exposed to direct sunlight or in hot places such as inside a car in the sun Doing so may cause overheating, fi re or malfunction.
15 Do not place the handset on an unstable or unlevel surface Doing so may result in the handset falling and causing injury or malfunction. Be particularly careful when vibration is set.
16 If your skin becomes irritated, immediately stop using the handset and consult with a dermatologist The following materials and surface treatments have been used for the handset. Some of these materials may cause itching, irritation, eczema, etc. in some rare cases depending on the individual's constitution and physical condition.
17 Before using the handset, make sure that no metal objects (such as pins) are stuck to the earpiece Failing to do so may result in a metal object causing an ear injury, etc. If you have a weak heart, be careful with the call vibration and ringtone volume settings Failing to do so may startle you and may be harmful to your heart.
18 Keep your face away from the memory card slot when inserting or removing the memory card Keep a memory card out of the reach of small children If the memory card is let go of suddenly, it may fl y out and hit your face resulting in injury.
19 General Notes Using Y our Handset • The handset employs radio waves. Signals may be disrupted even within service areas if you are indoors, underground, inside a tunnel or inside a vehicle. If you move to a location with poor signal reception, a call may be suddenly cut off.
20 For details on export laws, regulations and procedures, refer to the Web page of the Security Export Control Policy Division of the Ministry of Economy , T rade and Industr y . • If you have hearing aids, use of the handset may interfere with some operations of the hearing aids.
21 Be sure to observe local regulations on the separate collection of used batteries, wherever applicable. • Some handset display pixels may be missing or remain lit. This is not a defect or malfunction. If the display is left on for a long period of time, pictures may be permanently burned into it.
22 • Do not commercially use or transfer pictures taken with the camera without the permission of the copyright holder (photographer), except for personal use. • Do not use the camera in locations where taking photos and recording videos are prohibited.
23 TOSHIBA CORPORA TION IMPORT ANT NOTE: PLEASE READ BEFORE USING Y OUR HANDSET BY A TTEMPTING TO USE ANY SOFTWARE ON THE SUPPLIED HANDSET THIS CONSTITUTES YOUR ACCEPT ANCE OF THESE EULA TERMS. IF YOU REJECT OR DO NOT AGREE WITH ALL THE TERMS OF THIS EULA, PLEASE DO NOT A TTEMPT TO ACCESS OR USE THE SUPPLIED SOFTWARE.
24 WARRANTIES, CONDITIONS OR OTHER TERMS (WHETHER EXPRESS OR IMPLIED), INCLUDING BUT NOT LIMITED TO WARRANTIES, CONDITIONS AND TERMS OF SA TISF ACTORY QUALITY , MERCHANT ABILITY , FITNESS FOR A P ARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD-P ARTY RIGHTS; AND THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU.
25 T rademarks and P atents Licensed by QUALCOMM Incorporated under one or more of the following United States Patents and/or their counterparts in other nations: 4,901,307 5,504,773 .
26 Copyright © 1998-2003 The OpenSSL Project. All rights reserved. Copyright © 1995-1998 Eric Y oung (eay@cr yptsoft.com) All rights reserved. THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AND/OR.
27 FCC Notice The handset may cause TV or radio interference if used in close proximity to receiving equipment. The FCC can require you to stop using the handset if such interference cannot be eliminated.
28 The FCC has granted an Equipment Authorisation for this model handset with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines. SAR information on this model handset is on fi le with the FCC and can be found under the Display Grant section of http://www .
29 705T_E.indb 29 705T_E.indb 29 06.6.5 8:54:42 PM 06.6.5 8:54:42 PM.
Basic Operations This chapter explains the basic operations and functions of your handset. In This Chapter ❍ Parts & Functions ❍ USIM Card ❍ Batter y Pack ❍ Memor y Cards ❍ T urning Hand.
Basic Operations 31 P arts & Functions Handset ! TT A CHING THE ( A NDST RA P 705T_E.indb 31 705T_E.indb 31 06.6.5 8:54:42 PM 06.6.5 8:54:42 PM.
Basic Operations 32 1. Earpiece 2. Main Display 3. Left Soft Key J : Select items and access the Options menu. Also use this key to access the Messaging menu from standby . 4. Navigation Key E : Move cursor up, down, left or right, access functions assigned to the navigation key , etc.
Basic Operations 33 25. Earphone Microphone/AV OUT Jack : Connect the Stereo Handsfree Headset or video output cable. 26. Memory Card Slot 27. Side Key R : Activate the camera, etc. This key also acts as the shutter button during camera use. Press and hold R while your handset is closed to set/cancel the Hold setting for the side keys.
Basic Operations 34 Main Display Indicators ① Signal Strength Strong Moderate Weak Faint Out of Range Offl ine Mode On (page 229) External Connection for Data Synchronisation ② / Voice/V i.
Basic Operations 35 ⑧ / V-appli Activated/P aused (page 183) ⑨ Music File Playing Music File Playback Paused Video File Playing Streaming (page 99) Memory Card Inserted (page 44) ⑩ Battery Level.
Basic Operations 36 External Display Indicators ① Signal Strength Strong Moderate Weak Faint Out of Range Offl ine Mode On (page 229) External Connection for Data Synchronisation ② Packet .
Basic Operations 37 ⑦ All Playback Mode Repeat Playback Mode Repeat All Playback Mode Random Playback Mode One T rack Playback Mode / V -appli Activated/Paused (page 183) Alarm Set (page 260) ⑧ Ba.
Basic Operations 38 Information Prompt Information Prompt appears to inform you of missed calls, new messages and other information. 1. When Information Prompt appears, scroll to an item and press J (Select). The following items are available. Missed Calls: Missed calls (page 59).
Basic Operations 39 USIM Card Before using your handset, be sure to do the following. ◆ Insert the USIM card in your handset. ◆ Insert the battery pack in your handset (page 42). About the USIM Card The USIM card contains customer information such as your phone number .
Basic Operations 40 USIM PINs For security , the USIM card has two security codes: PIN 1 and PIN 2. Do not forget these codes and do not reveal them to others. PIN1 This is a four to eight digit security code to prevent others from using your handset.
Basic Operations 41 About Emergency Calls Emergency calls (110, 119 and 118) are available, even when the following restrictions are set. • Offl ine Mode (page 229). • Phone Lock (page 242). • Fixed Dialling Numbers (page 246). • Call Barring (page 67).
Basic Operations 42 Batter y P ack Before using your handset for the fi rst time, charge the battery . Inserting & Removing the Batter y P ack 1. Press down on the battery cover lightly and slide it towards the bottom of your handset. 2. Lift up battery cover .
Basic Operations 43 Charging the Batter y Pack The charging time is approximately 140 minutes. 1. Open the external connector cover of your handset and insert the connector of the rapid charger . 2. Insert the AC adapter plug into an AC outlet. The charging indicator illuminates and charging begins.
Basic Operations 44 Memor y Cards About Memory Cards Y ou can save the pictures you take, videos you record and various downloaded fi les to a memory card. ◆ This manual refers to a miniSD™ memory card as a “memory card.” ◆ For details on saving fi les to a memory card, see the corresponding explanation for each function.
Basic Operations 45 T urning Handset P ower On/Off T urning Handset P ower On 1. Press and hold O . If the PIN1 Code Request (page 240) is set to On , enter your PIN1 code.
Basic Operations 46 System Mode Setting Set the network (telecommunications carrier) and system mode to use. Y ou can also set the network connection information for using the Web and email. Selecting the Network Set the network by selecting an available network in your current area automatically or selecting a network manually from a list.
Basic Operations 47 Adding a Network Y ou can add up to fi ve new networks. 1. After Step 3 of “Selecting the Network” (page 46), select Add New Network and press J (Select). 2. Select <Empty> and press J (Options). 3. Select Edit and press J (Select).
Basic Operations 48 Setting the System Mode Set the handset to select the system mode from UMTS (3G) or GSM automatically or set the system mode fi xed to UMTS or GSM. Setting UMTS Only when using your handset in Japan and Dual when using your handset overseas is recommended.
Basic Operations 49 Language Setting Change the language displayed on your handset. 1. In Standby mode, press @ , select 設定 / Settings and press J ( 選択 / Select). 2. Select 一般設定 / Phone Settings and press J ( 選択 / Select). 3. Select Language / 言語選択 and press J ( 選択 / Select).
Basic Operations 50 Date & Time Settings Setting the Date & Time 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Phone Settings and press J (Select). 3. Select Date&Time and press J (Select). 4. Select Set Date/Time and press J (Select).
Basic Operations 51 World Clock Setting Y ou can set or modify City 1 and City 2 displayed on the world clock, adjust the time difference and set summer time. For details on displaying the world clock, see page 270. Setting City 1/City 2 1. In standby mode, press @ , select Settings and press J (Select).
Basic Operations 52 Setting the GMT Offset Select a city by entering a GMT time difference. 1. After Step 5 of “Setting City 1/City 2” (page 51), press J (Options). 2. Select GMT Offset and press J (Select). T o switch between + and - , press J (Options) and select +/ - .
Basic Operations 53 Main Menu Accessing Functions from Main Menu 1. Press @ to open Main menu. 2. Use E to select an icon and press J (Select). Entertainment: Access games and CAST functions. Vodafone live!: Access Vodafone live! menu and download pictures, melodies and applications (page 172).
Basic Operations 54 Codes Security Code “9999” or the four-digit number selected at time of subscription. This code is required to use some functions/services. Centre Access Code The four -digit number selected at time of subscription. It is required to access optional services from landlines.
Basic Operations 55 Making a Call 1. Confi rm that the power is on. Confi rm that the signal level is suffi cient. T ouching the internal antenna part (page 32) of your handset affects signal strength. Avoid touching this part of your handset during use.
Basic Operations 56 Answering a Call Ringtone plays and external light fl ashes for incoming calls. If the phone number is in the Contacts list (page 86), the name and phone number of the caller appear on the display . 1. Press N when a call is received.
Basic Operations 57 Engaged Call Operations Options Av ailable during a Call Press J (Options) during a call to perform the following. ◆ Hold: Place the call on hold. ◆ Mute My Voice: Mute the outgoing sound. ◆ Mute All: Mute both the outgoing and incoming sound.
Basic Operations 58 Adjusting Earpiece Volume 1. Press G or a side key ( P / Q ) during a call. The current setting appears. 2. Use E or a side key ( P / Q ) to adjust the earpiece volume. Recording Other Party's V oice Voice Record allows you to record the other party’ s voice during a call.
Basic Operations 59 Call Log V iewing Dialled Numbers/ Missed Calls/ Received Calls Y ou can view the last 20 dialled numbers, missed calls and received calls. 1. In standby mode, press @ , select Phonebook and press J (Select). 2. Select Call Log and press J (Select).
Basic Operations 60 V iewing Call T ime Viewing Last Call/All Calls 1. In standby mode, press @ , select Phonebook and press J (Select). 2. Select Call Log and press J (Select). 3. Select Call Timers and press J (Select). 4. Select Last Call or All Calls and press J (Select).
Basic Operations 61 V iewing Call Costs View the cost for the last call or the total costs for all calls. The data for the total costs is saved to the USIM card. Viewing Last Call/All Calls 1. In standby mode, press @ , select Phonebook and press J (Select).
Basic Operations 62 Setting Call Cost Display Set whether to display the call cost after a call ends. 1. After Step 3 of "Viewing Last Call/All Calls" (page 61), select Call Cost Display and press J (Select). 2. Select On or Off and press J (Select).
Basic Operations 63 Optional Ser vices For details on services, contact Vodafone General Information (page 315). V oicemail T ransfer calls to V oicemail Centre (ie: when your handset is out of range or a call is in progress). appears when you have a new message.
Basic Operations 64 Listening to Y our V oicemail 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Call Settings and press J (Select). 3. Select Voicemail and press J (Select). 4. Select Call Voicemail and press J (Call). Follow the voice prompts.
Basic Operations 65 Call Diverting Forward incoming calls to a preset phone number . Activating Call Divert 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Call Settings and press J (Select). 3. Select Call Diverting and press J (Select).
Basic Operations 66 6. Select an input method and press J (Select). ◆ From Phonebook: Select an entry from the Contacts list (page 86) and press @ . ◆ Set Number: Enter a phone number and press J (OK). ◆ From Call Log: Select a phone number from the call log (page 59) and press @ .
Basic Operations 67 Call Barring Restrict outgoing and incoming voice calls, video calls and SMS messages. Activating Call Barring 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Call Settings and press J (Select). 3. Select Call Barring and press J (Select).
Basic Operations 68 Deactivating Call Barring 1. After Step 3 of "Activating Call Barring" (page 67), select Deactivate and press J (Select). 2. Select Outgoing Calls , Incoming Calls or All and press J (Request). 3. Enter your call barring service code (page 54).
Basic Operations 69 Call Waiting Place a call on hold to take another call. The caller’ s name and phone number appear if the information is saved in Contacts list (page 86). Activating Call W aiting 1. In standby mode, press @ , select Settings and press J (Select).
Basic Operations 70 Using Call Waiting 1. When the call waiting tone is heard, Press J (Options). If the phone number is saved in Contacts List (page 86), the name and phone number of the caller appear on the display . 2. Select Answer and press J (Select).
Basic Operations 71 Multiparty Call Call other parties during a call and switch between the parties or talk to multiple parties simultaneously . Connect with up to fi ve parties simultaneously . The phone numbers of all the parties appear on the display during the call.
Basic Operations 72 T e xt Entr y T ext Entry Modes Switching between Japanese Entry Mode and English Entr y Mode Switch between Japanese entry mode and English entr y (T9) mode. 1. In a text entry window, press J (Options). 2. Select Japanese Entry or English Entry (T9) and press J (Select).
Basic Operations 73 Entering Characters in T9 Mode In T9 mode, press a key once for each letter you want to enter . This feature displays word predictions while you enter characters. Example: Entering "dog" 1. Press 364 . 2. Press B to display the next prediction.
Basic Operations 74 Editing T ext Undo/Redo During text input, you can undo and redo operations. 1. In a text entry window, enter characters. 2. Press J (Options), select Undo/Redo and press J (Select). Copy/Cut Copy or cut a range of characters and store it in the clipboard.
Basic Operations 75 Using T ext Range Select text to use T ext Range features (ie: Save text to W ords list, delete text, etc.). This operation is only available in Japanese Entry (page 72). 1. In a text entry window, press J (Options), select Defi ne Range and press J (Select).
Basic Operations 76 3. Select an item and press J (Select). ◆ Notepad: Insert information saved to a notepad entry . ◆ Signature: Insert MMS Signature (page 158) or SMS Signature (page 163). ◆ Contact Details: Insert information saved to a Contacts list entry .
Basic Operations 77 Customise Confi gure the settings for editing characters. This opera tion is only available in Japanese Entry (page 72). 1. In a text entry window, press J (Options), select Customise and press J (Select). 2. Select an item and press J (Select).
Basic Operations 78 Phonebook T o access Phonebook menu, press @ in standby mode, select Phonebook and press J (Select). The Phonebook menu contains the following items. ◆ Contacts List: Access Contacts entries. ◆ Create Contact: Add a new entr y to Contacts List.
Basic Operations 79 Adding an Entry to the Contacts List Y ou can save up to 500 Contacts list entries to your handset. Y ou can also save Contacts list entries to the USIM card and a memory card. The maximum number of entries you can save depends on the size of entries and available space in the USIM card or memory card.
Basic Operations 80 ◆ Country ◆ State ◆ City ◆ Street Address ◆ Add Info.: Enter additional address information. ◆ Job Title: Enter a job title. ◆ Company: Enter a company name. ◆ Birthday ◆ URL: Enter a URL. ◆ Category: Set the categor y .
Basic Operations 81 Incoming Settings Setting a Picture 1. In Step 3 of “Adding an Entr y from the Main Menu” (page 79), select Picture and press @ . 2. Select T ake Picture or My Pictures and press J (Select). ◆ T ake Picture: Activate the camera for you to take a picture.
Basic Operations 82 Setting the Ringtone & Other Settings Set the incoming external light, ringtone volume, ringtone pattern, vibration and secret setting individually for each Contacts list entry . 1. In Step 3 of “Adding an Entr y from the Main Menu” (page 79), select Sound/Secret and press @ .
Basic Operations 83 Editing Categories Y our handset already has the following categories: Business Card , Private , Business , VIP , Colleague and Favourites . In addition, you can set your own categories. Y ou can edit and set the options of categories.
Basic Operations 84 Setting Groups Set the groups to use for MMS addresses. There are fi ve groups and you can add up to ten members to each group. For details on using the Group list, see “Creating & Sending an MMS Message” (page 148). Adding a New Member to a Group 1.
Basic Operations 85 Editing Group Members 1. After Step 3 of “Adding a New Member to a Group” (page 84), select a member and press J (Options). 2. Select Edit and press J (Select). 3. Select an item and press @ . 4. Enter information and press @ .
Basic Operations 86 Using the Contacts List Searching for an Entry in the Contacts List 1. In standby mode, press @ , select Phonebook and press J (Select). 2. Select Contacts List and press J (Select). 3. Press J (Options). 4. Select Search Mode and press J (Select).
Basic Operations 87 Making a Call 1. In standby mode, press @ , select Phonebook and press J (Select). 2. Select Contacts List and press J (Select). 3. Select a Contacts list entry and press @ . The details window of the entry appears. 4. Select a phone number and press N .
Basic Operations 88 Using Speed Calling Add up to nine phone numbers to the Speed Calling list for quick access to those numbers. Adding a Phone Number to the Speed Calling List 1. In standby mode, press @ , select Phonebook and press J (Select). 2. Select Settings and press J (Select).
Basic Operations 89 Using Speed Calling to Make Calls 1. In standby mode, enter a speed calling number . 2. Press N . Using Send My vCard Convert the owner information appearing in My D etails to vObject format (page 200) and send it by Bluetooth™. 1.
Basic Operations 90 Editing Contacts List Entries Edit and delete entries in the Contacts list. 1. In standby mode, press @ , select Phonebook and press J (Select). 2. Select Contacts List and press J (Select). 3. Select a Contacts list entry and press J (Options).
Basic Operations 91 Options Av ailable from the Contacts List Y ou can perform the following operations if you press J (Options) from the Contacts list. ◆ View: Display the details window for selected entry . ◆ Search Mode: Select a search mode (page 86).
Basic Operations 92 Setting the Contacts List Setting the Default Storage Place Preset the default storage place for new Contacts list entries. An indicator ( / / ) at the top of the Contacts list window (page 86) indicates the storage place of the Contacts list entry .
Basic Operations 93 Prohibiting Use of the Contacts List 1. In standby mode, press @ , select Phonebook and press J (Select). 2. Select Settings and press J (Select). 3. Select Phonebook Lock and press J (Select). 4. Select On and press J (Select). 5.
Basic Operations 94 Contacts Memory Status Check the number of Contacts list entries saved in your handset, USIM card and memory card. 1. In standby mode, press @ , select Phonebook and press J (Select).
Media Player Media Player enables playback and streaming of video/audio fi les. Media Player supports 3GPP , 3GPP2, MP3 and MP4 fi le format. In this Chapter ❍ Media Player Menu ❍ Playback Window ❍ Playing Music & Videos ❍ Using Playlists ❍ Other Operations & Settings ❍ Music Player 705T_E.
Media Player 96 Media Player Menu 1. In standby mode, press H . The Media Player menu appears. 2. Use F to select Music tab ( ), Video tab ( ) or Streaming tab ( ). 3. Select an item and press J (Select). Music tab ( ) ◆ Download Music: Start browser and connect to a download site.
Media Player 97 Playback Window ① File number/total number of fi les ② Title or fi le name ③ Artist name ④ Progress bar ⑤ Elapsed playback time ⑥ T otal playback time ⑦ Playback status.
Media Player 98 Playing Music & V ideos 1. In standby mode, press H . The Media Player menu appears. 2. Use F to switch to the Music tab or Video tab, select Playlists , Beat Engine Box , My Sounds , My Videos or Recent and press J (Select). 3. Select a playlist or a fi le within a folder and press @ .
Media Player 99 Switching Play Modes Y ou can switch to any of the following play modes if you press J (Options) while a track is playing/paused and select Play Mode . ◆ Repeat ( ): Play the current track repeatedly . ◆ Repeat All ( ): Play all fi les in the current playlist or folder repeatedly .
Media Player 100 Using Playlists Creating a Playlist Y ou can create up to ten playlists in your handset. Y ou can also create up to ten playlists in a memory card. Each playlist can contain up to 50 tracks. This feature allows you to create a list of fi les that you want to play as a set.
Media Player 101 Editing a Playlist Y ou can add new tracks to a playlist you have already created, as well as change the playback order and delete tracks. 1. After Step 4 of “Creating a Playlist” (page 100), select a playlist and press J (Options).
Media Player 102 Other Operations & Settings Media Player Settings 1. In standby mode, press @ . The main menu appears. 2. Select Settings and press J (Select). 3. Select Media Player Set and press J (Select). ◆ Priority Setting: If Incoming Call is set, playback pauses when a call is received and you are notifi ed of the call.
Media Player 103 Music Player Use Music Player to navigate Media Player with your handset closed. Play tracks and adjust volume using the Music Player keys and remote control keys.
Media Player 104 Operating During Playing Adjusts the playback volume: Press P / Q . Pauses/resumes playback: Press X . Rewinds/Forwards the track: Press and hold U / V . Plays the next track: Press V . Rewinds the current track to the beginning/Plays the previous track: Press U .
V ideo Call In This Chapter ❍ About Video Calls ❍ Making a Video Call ❍ Answering a Video Call ❍ Convenient Functions for Video Calls ❍ Video Call Settings 705T_E.
Video Call 106 About V ideo Calls A video call enables two parties with video call compatible handsets to send images to each other while they talk. Indicators The following indicators appear during video calls.
Video Call 107 Making a V ideo Call 1. In standby mode, confi rm that the indicator for indicating you are in an area with 3G-network coverage is displayed. 2. Enter a phone number and press J (Options). 3. Select Video Call and press J (Select). The sound automatically switches from the earpiece to the speaker .
Video Call 108 Answering a V ideo Call When a video call is received, the ringtone plays, the external light fl ashes and “Video Call” appears on the display . 1. Press N when a video call is received. The sound automatically switches from the earpiece to the speaker .
Video Call 109 Convenient Functions for V ideo Calls The following convenient functions are available during calls. Placing a Call on Hold Place a call on hold. While on hold, voice guidance notifi es the other party that he/she has been placed on hold.
Video Call 110 Setting Mute Mute the incoming voice and outgoing voice during a call. 1. Press J (Options) during a call. 2. Select Mute and press J (Select). 3. Select an item and press J (Select). ◆ Mute My Voice: Mute the outgoing voice. ◆ Mute All: Mute both the outgoing and incoming voice.
Video Call 111 Switching Screen Display Select the screen display method during a call. 1. Press J (Options) during a call. 2. Select Screen Settings and press J (Select). 3. Select Switch Screens and press J (Select). 4. Select a display method and press J (Select).
Video Call 112 Sending a Picture Send a picture in Data Folder during a call. 1. Press J (Options) during a call. 2. Select Screen Settings and press J (Select). 3. Select Sending Picture and press J (Select). 4. Select My Pictures and press J (Select).
Video Call 113 V ideo Call Settings Setting the Outgoing Image Preset the outgoing image to send during a video call. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Call Settings and press J (Select). 3. Select Video Call and press J (Select).
Video Call 114 Setting Auto Answer for Video Calls When the Auto Answer function for video calls is set, video calls received from phone numbers in the Auto Answer list (below) are answered automatically without having to press a key . 1. After Step 3 of “Setting the Outgoing Image” (page 113), select Auto Answer and press J (Select).
Video Call 115 Setting the Backlight Set whether the backlight is lit during a video call. 1. After Step 3 of “Setting the Outgoing Image” (page 113), select Backlight and press J (Select).
Camera/V ideo Camera Y ou can take pictures and record videos and then save them, attach them to messages and display them on a TV . Y ou can also edit pictures. In This Chapter ❍ Camera ❍ Pictures ❍ Videos ❍ Picture & Video Settings 705T_E.
Camera/Video Camera 117 Camera Y ou can use the camera to take pictures and record videos, as well as to scan QR codes (page 274). Modes Modes for T aking Pictures ◆ Digital Camera: T ake high-quality pictures at W640×H480 size or higher resolution.
Camera/Video Camera 118 Indicators Camera Indicators ① Camera Mode/Multi Shots: Digital Camera, Mobile Camera, Scanner , Multi Shots (High Speed), (Normal Speed), (Low Speed) ② Picture Size: W1280.
Camera/Video Camera 119 Video Camera Indicators ⑫ Video Mode: Video Mode ⑬ Video Size: W320 × H240, W176 × H144, W128 × H96 ⑭ Video Quality: Fine, Normal, Economy ⑮ Status: Standby , Record.
Camera/Video Camera 120 V iewing Images on a T elevision Y ou can view pictures/videos on a TV . The TV systems supported by your handset are the NTSC and P AL systems. The SECAM system is not supported. For details, see “Displaying Files on a TV” (page 198).
Camera/Video Camera 121 Pictures T aking a Picture There are two modes for taking pictures: Digital Camera and Mobile Camera (page 117). Y ou can also edit the pictures you take and set them for Contacts list entries (page 131). 1. In standby mode, press the side key ( R ).
Camera/Video Camera 122 Send Functions 1. Press J (Options) after capturing image. 2. Select Send and press J (Select). 3. Select a send method and press J (Select). ◆ As MMS: Send the picture attached to an MMS message (page 148). ◆ Via Bluetooth: Send the picture by Bluetooth™ (page 285).
Camera/Video Camera 123 Functions for T aking Pictures Switching Camera Modes For details on camera modes, see “Modes for T aking Pictures” (page 117). 1. Press J (Options) before capturing image, select Camera Mode and press J (Select). 2. Select Digital Camera , Mobile Camera or Scanner and press J (Select).
Camera/Video Camera 124 Multi Shots T ake nine pictures in succession. 1. Press J (Options) before capturing image, select Multi Shots and press J (Select).
Camera/Video Camera 125 Additional Functions for T aking Pictures ◆ Delay Timer (page 140) ◆ Mobile Light (page 140) ◆ White Balance (page 141) ◆ Colour Control (page 141) ◆ Exposure Control (page 142) 705T_E.indb 125 705T_E.indb 125 06.6.5 8:55:10 PM 06.
Camera/Video Camera 126 Editing a Picture Y ou can edit the picture after capturing image using Mobile Camera or pictures saved to Data Folder (page 193). Y ou can edit an y picture saved in JPEG or PNG format with a fi le size up to 100 KB and a picture size up to W240 × H320.
Camera/Video Camera 127 Adding a Frame Add frames to the pictures you take. Y ou can select a frame from preinstalled frames or frames saved to Data Folder . 1. Press J (Options) after capturing image, select Edit Picture and press J (Select). For a picture saved to Data Folder (page 193), select Advanced and press J (Select).
Camera/Video Camera 128 Adding a Stamp Paste stamps on the pictures you take. Y ou can select a stamp from preinstalled stamps or stamps saved to Data Folder . 1. Press J (Options) after capturing image, select Edit Picture and press J (Select). For a picture saved to Data Folder (page 193), select Advanced and press J (Select).
Camera/Video Camera 129 Adding T ext Add text to the pictures you take. 1. Press J (Options) after capturing image, select Edit Picture and press J (Select). For a picture saved to Data Folder (page 193), select Advanced and press J (Select). 2. Select Add T ext and press J (Select).
Camera/Video Camera 130 Rotating a Picture Rotate and then save the pictures you take. 1. Press J (Options) after capturing image, select Edit Picture and press J (Select). For a picture saved to Data Folder (page 193), select Advanced and press J (Select).
Camera/Video Camera 131 Saving to a Contact Entry Register a picture taken in Mobile Camera mode at the W112 × H112 size (pages 122, 136) to a Contacts list entr y . 1. T ake a picture at the W112 × H112 size, press J (Options) after capturing image, select Assign to Contact and press J (Select).
Camera/Video Camera 132 V ideos Recording a Video Use the camera to record videos. There are three modes for recording videos: Camcorder , For MMS and Short Video (page 117). 1. In standby mode, press and hold the side key ( R ). 2. Display the subject and press @ or a side key ( R ).
Camera/Video Camera 133 Send Functions 1. Press J (Options) after recording a video. 2. Select Send and press J (Select). 3. Select a send method and press J (Select). ◆ As MMS: Send the video by attaching an MMS message (page 148). ◆ Via Bluetooth: Send the video by Bluetooth™ (page 285).
Camera/Video Camera 134 Playing a V ideo 1. Press J (Options) before recording a video. 2. Select My Videos and press J (Select). 3. Select a video and press @ .
Camera/Video Camera 135 Functions for Recording Videos Switching Record Modes For details on record modes, see “Modes for Recording Videos” (page 117). 1. Press J (Options) before recording a video, select Record Mode and press J (Select). 2. Select Camcorder , For MMS or Short Video and press J (Select).
Camera/Video Camera 136 Picture & V ideo Settings Settings for T aking Pictures Changing the Picture Quality Change the picture quality for camera modes. 1. In standby mode, press @ , select Camera and press J (Select). 2. Select Settings and press J (Select).
Camera/Video Camera 137 Date Stamp Add a date stamp to pictures. 1. After Step 4 of “Changing the Picture Quality” (page 136), select Date Stamp and press J (Select). 2. Select On and press J (Select). 3. Select a date colour and press J (Select).
Camera/Video Camera 138 Settings for Recording V ideos Changing the Video Quality 1. In standby mode, press @ , select Camera and press J (Select). 2. Select Settings and press J (Select). 3. Select Video Settings and press J (Select). 4. Select Movie Settings and press J (Select).
Camera/Video Camera 139 Start & End Sounds Set the start and end sounds. 1. After Step 3 of “Changing the Video Quality” (page 138), select Start/End Sounds and press J (Select). 2. Select Pattern 1 or Pattern 2 and press @ . Settings for Pictures & V ideos Using Macro Lens Attach the macro lens to read QR codes (page 274).
Camera/Video Camera 140 Storage Place Set the storage places to which to automatically save pictures and videos. 1. Press J (Options) before capturing image or recording a video, select Save Image to or Save Video to and press J (Select). 2. Select Phone Memor y or Memory Card and press J (Select).
Camera/Video Camera 141 White Balance Under some conditions, the colours in pictures and videos may differ from the actual colours. If so, you can set the white balance so that the colours more closely resemble the actual colours. 1. Press J (Options) before capturing image or recording a video, select Advanced and press J (Select).
Camera/Video Camera 142 Exposure Control Adjust the brightness for pictures and videos. 1. Press J (Options) before capturing image or recording a video, select Advanced and press J (Select). 2. Select Exposure Control and press J (Select). 3. Use F to adjust the exposure.
Camera/Video Camera 143 Setting the File Name Y ou can preset the fi le name to use when saving pictures and videos to the date and time or a name of your choice. 1. After Step 3 of “Picture & Video Effects” (page 142), select File Name and press J (Select).
Camera/Video Camera 144 The following keypad shortcuts are available while you are taking pictures and recording videos. T aking Pictures Recording Videos 1 Key Guide Key Guide 2 Camera Mode Record Mo.
Messaging Messaging allows you to send and receive text messages, pictures, sounds, vObjects and other data via the Vodafone live! Service Centre. In This Chapter ❍ Messaging Capabilities ❍ MMS ❍ SMS ❍ MMS/SMS Common Operations 705T_E.indb 145 705T_E.
Messaging 146 Messaging Capabilities Exchange text messages, pictures, sounds, vObjects, etc. with other handsets, PCs and other devices connected to the Internet. For details on the messaging ser vice, contact Vodafone General Information (page 315).
Messaging 147 Tip Alternatively , you can press a @ from standby mode and select Messaging to access the Message menu. Message Menu Access the Message menu by pressing J ( ) from standby mode. ◆ Received Msgs.: Received messages are saved here (pages 153, 161).
Messaging 148 MMS About MMS The Multimedia Messaging Service (MMS) allows you to exchange multimedia messages containing data such as text, pictures, sounds, animations and video clips. For details on MMS, contact V odafone General Information (page 315).
Messaging 149 ◆ Add Picture: Attach picture fi les. Y ou can also activate the camera and take a picture to attach. T o attach a preinstalled 2D, 3D or animated animal GIF fi le, selected Animated Emoticon . ◆ Add Sound: Attach sound fi les saved in Melody&Music.
Messaging 150 i " « Ìà >V äÓä°äÉÎää°ä LÞÌià £ÓÎä Recipient List Window Recipient List Operations From the Create MMS Message window (page 148), select the address fi eld and press @ to display the Recipient list.
Messaging 151 Using MMS T emplate Use MMS templates that have preset pictures and sounds to create messages. Y ou can also edit MMS templates. 1. In standby mode, press J ( ), select T emplates and press J (Select). 2. Select MMS T emplates and press J (Select).
Messaging 152 Setting the File Playback Time Set the playback time for the text and attached fi les. 1. After Step 2 of "Creating & Sending an MMS Message" (page 148), select text or an attached fi le and press J (Options). 2. Select Item Duration and press J (Select).
Messaging 153 Checking MMS Messages in Received Msgs. When a message is received, animation plays while the ringtone is playing and your handset is vibrating. The indicator appears at the top of the display . Received messages are saved to Received Msgs.
Messaging 154 Receiving Complete MMS Messages When an MMS arrives, the fi rst portion of the text message is received as a notifi cation and the complete MMS is temporarily stored on the mail server (page 156). The indicator appears when a notifi cation arrives.
Messaging 155 Checking MMS Messages in Sent Messages Sent messages are saved to Sent Messages of the mailbox. For details on operations available from Sent Messages, see page 168. 1. In standby mode, press J ( ), select Sent Messages and press J (Select).
Messaging 156 Using the Mail List Incoming MMS messages with attached fi les or email messages from PCs or other devices are stored on the mail server . Y ou can use the mail list to retrieve MMS messages and email messages. 1. In standby mode, press J ( ), select Ser ver Mail Box and press J (Select).
Messaging 157 MMS Settings Receiving Settings 1. In standby mode, press J ( ), select Settings and press J (Select). 2. Select MMS Settings and press J (Select). 3. Select Receiving Settings and press J (Select). 4. Select an item and press J (Select).
Messaging 158 Sending Settings 1. After Step 2 of “Receiving Settings” (page 157), select Sending Settings and press J (Select). 2. Select an item and press J (Select). ◆ Delivery Report: Receive deliver y reports to confi rm whether sent messages were delivered to recipients.
Messaging 159 SMS About SMS The Short Message Service (SMS) allows you to exchange text message with other handsets. For details on SMS, contact Vodafone General Information (page 315). Creating & Sending an SMS Message 1. In standby mode, press J ( ), select Create Message and press J (Select).
Messaging 160 Recipient List Operations Y ou can perform the following operations if you press J (Options) from the Recipient list. ◆ Send: Send the message. ◆ Edit Recipient: Edit the address. ◆ Delete Recipient: Delete the address. ◆ Add Recipient: Add an address.
Messaging 161 Checking SMS Messages in Received Msgs. When a message is received, animation plays while the ringtone is playing and your handset is vibrating. If your handset is closed, the animation is displayed on the external display . The indicator appears at the top of the display .
Messaging 162 Checking SMS Messages in Sent Messages Sent messages are saved to Sent Messages of the mailbox. For details on operations available from Sent Messages, see page 168. 1. In standby mode, press J ( ), select Sent Messages and press J (Select).
Messaging 163 SMS Settings 1. In standby mode, press J ( ), select Settings and press J (Select). 2. Select SMS Settings and press J (Select). 3. Select an item and press @ . ◆ Delivery Report: Receive deliver y reports to confi rm whether sent messages were delivered to recipients.
Messaging 164 Setting 3D Pictogram Display 3D Pictogram Display is a 3D animation display function compatible with words, pictographs and emoticons in text. Y ou can set the display conditions, background colour and display speed. 1. In standby mode, press J ( ), select Settings and press J (Select).
Messaging 165 Common Settings Y ou can set various settings common to MMS and SMS. 1. In standby mode, press J ( ), select Settings and press J (Select). 2. Select Common Settings and press J (Select). 3. Select an item and press J (Select). ◆ Reply Settings: Set whether to quote received messages when replying to them.
Messaging 166 Received Msgs. Operations Y ou can perform the following operations if you press J (Options) from the Received Msgs. list or a message. ◆ View: Check the contents of the message. ◆ Retrieve: Download the body text and attachment fi les of the MMS message (only for notifi cation messages).
Messaging 167 ◆ View Item: View all fi les attached to the MMS message. Y ou can also play , display and save fi les. ◆ Save as T emplate: Save the message as a template. ◆ Copy T ext: Specify a range of text in any part of the message and then copy the text.
Messaging 168 Sent Messages Operations Y ou can perform the following operations if you press J (Options) from the Sent Messages list or a message. ◆ View: Check the contents of the message. ◆ Play: Play the MMS message from the fi rst page. ◆ Resend: Edit the message and then resend it.
Messaging 169 Drafts Save the messages you create to Drafts. 1. In standby mode, press J ( ), select Drafts and press J (Select). 2. Select a message and press J (Options). 3. Select an item and press J (Select). ◆ Edit: Edit the message. ◆ Delete: Select from One , All or Select Multi for deleting messages.
Messaging 170 Unsent Messages Messages that could not be sent are saved to Unsent Messages. 1. In standby mode, press J ( ), select Unsent Messages and press J (Select). 2. Select a message and press J (Options). 3. Select an item and press J (Select).
V odafone live! Vodafone live! is an online service that allows you to use the Internet to access various genres of content. Y ou can browse information or download pictures, melodies and applications. In This Chapter ❍ Accessing Vodafone live! ❍ Bookmarks ❍ Operations for Web Pages ❍ Browser Settings ❍ V-appli 705T_E.
Vodafone live! 172 Accessing V odafone live! Y ou can access Vodafone live! to search for and obtain information. A separate subscription is required to use the Vodafone live! service. For details, contact Vodafone General Information (page 315). 1. In standby mode, press @ , select V odafone live! and press J (Select).
Vodafone live! 173 Key Assignments for Browsing the Web The following shows the key assignments for browsing the Web. J : Select an item or displays the Option menu. K : T ake you back to the previous window . @ : Select an item. G : Scroll up or down.
Vodafone live! 174 Bookmarks If you bookmark frequently accessed pages, you can access them quickly and easily . Adding a Bookmark 1. Display a page and press J (Options). 2. Select Bookmarks and press J (Select). 3. Select Add Bookmark and press J (Select).
Vodafone live! 175 Using Bookmarks 1. In standby mode, press @ , select V odafone live! and press J (Select). 2. Select Bookmarks and press J (Select). 3. Select the title of the page and press J (Options). T o access the page of the selected title, press @ .
Vodafone live! 176 Operations for W eb P ages Y ou can perform various operations while a Web page is displayed. Y ou can perform the following operations if you press J (Options) while a Web page is displayed. ◆ Select: Select the item at the cursor position.
Vodafone live! 177 Using Files in Web P ages Y ou can perform various operations such as saving and displaying/playing picture and animation fi les in Web pages. 1. Display a Web page containing a fi le and press J (Options). 2. Select File Select Mode and press J (Select).
Vodafone live! 178 Downloading Files from Links Download fi les from links and other objects in some Web pages. 1. Display a Web page, select a character string for which a link is set and press @ . 2. Press J (Y es). Downloading begins. 3. Select an item and press J (Select).
Vodafone live! 179 Set various browser settings. 1. In standby mode, press @ , select V odafone live! and press J (Select). 2. Select Browser Settings and press J (Select).
Vodafone live! 180 V -appli From Web pages, you can download a variety of Java™ compatible applications such as games. Applications In addition to ordinary applications that run solely on your handset, some applications need to connect to the network (Web).
Vodafone live! 181 V-appli Menu 1. In standby mode, press @ , select Entertainment and press J (Select). 2. Select V-appli and press J (Select). 3. Select an item and press J (Select). ◆ V-appli Library: Save applications downloaded from the Web and access preinstalled applications.
Vodafone live! 182 Downloading V-appli Download applications. Before downloading an application, you can confi rm details such as the download size and storage size. 1. In standby mode, press @ , select Entertainment and press J (Select). 2. Select V-appli and press J (Select).
Vodafone live! 183 Starting V-appli Y ou can run one application in standby mode. 1. In standby mode, press @ , select Entertainment and press J (Select). 2. Select V-appli and press J (Select). 3. Select V-appli Library and press J (Select). 4. Select an application and press @ .
Vodafone live! 184 V-appli Settings 1. In standby mode, press @ , select Entertainment and press J (Select). 2. Select V-appli and press J (Select). 3.
Vodafone live! 185 Managing V-appli 1. In standby mode, press @ , select Entertainment and press J (Select). 2. Select V-appli and press J (Select). 3. Select V-appli Library and press J (Select). 4. Select an application and press J (Options). 5. Select an item and press J (Select).
V odafone live! C AST Subscribe to services to automatically have information delivered regularly . In This Chapter ❍ Vodafone live! CAST ❍ Subscribing/Cancelling Subscription ❍ Checking Content Updates ❍ Downloading Content Manually ❍ Checking Histor y 705T_E.
Vodafone live! CAST 187 V odafone live! C AST With this service, you can subscribe to contents and receive automatic updates. Content updates are received during the night.
Vodafone live! CAST 188 Subscribing/Cancelling Subscription 1. In standby mode, press @ , select Entertainment and press J (Select). 2. Select CAST and press J (Select). 3. Select Reg. /Cancel and press J (Select). 4. Press J (Y es). Follow the onscreen instructions.
Vodafone live! CAST 189 1. In standby mode, press @ , select Entertainment and press J (Select). 2. Select CAST and press J (Select). 3. Select What’s New? and press @ . Indicator Description: Unread Read Checking Content from Information Prompt 1. When the information prompt appears, select New CAST Contents and press J (Select).
Vodafone live! CAST 190 Downloading Content Manually When an update cannot be received because your handset is turned off or the signal is weak, manually download the update. Only updates for that day can be downloaded. 1. In standby mode, press @ , select Entertainment and press J (Select).
Vodafone live! CAST 191 Past updates are saved to History . 1. In standby mode, press @ , select Entertainment and press J (Select). 2. Select CAST and press J (Select). Indicator Description: Y ou have unread content Y ou have read all content 3. Select Histor y and press J (Select).
Data Folder The data you save in your handset is stored in Data Folder . Y ou can move the data stored in the folders of Data Folder and edit it for use with other functions. In This Chapter ❍ Data Folder ❍ Using Files & Folders ❍ Displaying Files on a TV ❍ Using vObjects ❍ Using a Memor y Card ❍ Using the USIM Card 705T_E.
Data Folder 193 Data Folder Data Folder of your handset stores the pictures you take, videos you record, fi les you receive from external devices, fi les you download from the Web, etc. Data Folder can store up to 40 MB or a total of a combination of approximately 500 fi les and personal folders.
Data Folder 194 Files Storable in Data Folder Folder File Format (Icon) Pictures JPEG ( ), GIF ( ), WBMP ( ), PNG ( ) Digital Camera JPEG 1 ( ) Videos MPEG-4 2 ( ) Melody&Music AMR/MPEG-4 2 ( ), S.
Data Folder 195 Using Files & Folders Connecting to the Web from Folders Connect to the Web from within preinstalled folders in Data Folder . ◆ Download Pictures: Download picture fi les. ◆ Download Videos: Download video fi les. ◆ Download Ringtone: Download sound fi les.
Data Folder 196 ◆ Delete: Delete just the selected fi le or all fi les within the folder . Select One to delete the selected fi le and select All to delete all fi les. However , if the folder contains a personal folder , the fi les within the personal folder are not deleted even if you select All .
Data Folder 197 ◆ Rename: Change the name of the selected fi le. ◆ Mute / Unmute: Mute the playback sound. ◆ Full Screen / Normal Screen: Switch the screen display . ◆ Hide Controller / Show Controller: Hide or show the controller . ◆ Record Voice: Record sound.
Data Folder 198 Displaying Files on a TV Connect handset to a TV to display camera and video fi les. Setting the TV System The TV systems supported by your handset are NTSC (Japan and U.S.A.) and PAL (Europe). SECAM is not supported. 1. In standby mode, press @ , select Settings and press J (Select).
Data Folder 199 Connecting Handset to TV Use the video output cable (optional) to connect the handset to a TV . 1. Connect your handset to a TV . ① Open the earphone microphone/AV OUT jack cover of your handset. ② Insert the video output cable plug into the earphone microphone/AV OUT jack.
Data Folder 200 Using vObjects About vObjects vObject is a collective name for fi le formats that enable your handset and other vObject compatible handsets, PCs and other devices to exchange and mutually use data such as Contacts list entries and Calendar data.
Data Folder 201 Creating a vObject 1. Display a data. For details on displaying the Contacts list, see page 86. For details on checking appointments, see page 258. 2. Press J (Options). 3. Select Send vCard or Send vCalendar and press J (Select). 4. Select a storage place and press J (Select).
Data Folder 202 Using a Memor y Card Check and edit pictures and other data saved to a memory card. Y ou can also save a backup of Data Folder , Contacts list and other data in your handset to a memory card. Formatting a Memor y Card Use your handset to format a memory card.
Data Folder 203 Confi rming Memor y Card Usage Status Confi rm the volume label, card memory size, used memory size and remaining memory size. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Memor y Settings and press J (Select).
Data Folder 204 Using the USIM Card Y ou can move or copy Contacts list entries from your handset or a memory card to the USIM card, as well as move SMS messages from your handset to the USIM card. An indicator at the top of the Contacts list window (page 86) indicates the storage place of the Contacts list entry .
Data Folder 205 8. Select T o USIM and press J (Select). ◆ T o Phone: Move Contacts list entries with a check mark to the Contacts list of your handset. ◆ T o Memor y Card: Move Contacts list entries with a check mark to the Contacts list of a memory card.
Data Folder 206 Copying Contacts List Entries Copying Entries to the USIM Card Copy the name and default phone number (page 90) of an entry . 1. In standby mode, press @ , select Phonebook and press J (Select). 2. Select Contacts List and press J (Select).
Data Folder 207 Mo ving SMS Messages Move messages in Received Msgs. (page 161) and Sent Messages (page 162) of your handset and messages in your USIM card. The maximum number of messages you can save to the USIM card differs depending on the amount of available memory space in the USIM card.
Settings Y ou can make various settings to personalise your handset. In This Chapter ❍ Mode Settings ❍ Display Settings ❍ Phone Settings ❍ Call Settings ❍ Security Settings ❍ Memor y Settings ❍ Network Settings ❍ Location Settings ❍ Shortcut Menu 705T_E.
Settings 209 Mode Settings Set and customise sound and vibration settings. Y our handset has four preset profi les. Y ou can change the sound and vibration settings of each profi le. Normal: Profi le for ordinary use. Silent: Profi le for when you do not want your handset to emit any sound.
Settings 210 Tip Y ou can also personalise Normal profi le if you press a @ in standby mode, select Settings and then select Sound Settings . P ersonalising Profi les Personalising the Ringtone Volume 1. After Step 2 of “Switching Profi les” (page 209), select Normal , Car or Meeting and press J (Options).
Settings 211 Personalising the Ringtone Set a preinstalled sound in your handset or a sound or video in Data Folder as the ringtone. 1. After Step 2 of “Switching Profi les” (page 209), select Normal , Car or Meeting and press J (Options). 2. Select Personalise and press J (Select).
Settings 212 Personalising the Vibration 1. After Step 2 of “Switching Profi les” (page 209), select Normal , Silent , Car or Meeting and press J (Options). 2. Select Personalise and press J (Select). 3. Select Vibration and press J (Select). 4. Select Voice Call , Video Call or Received Message and press J (Select).
Settings 213 Personalising the Keypad T one 1. After Step 2 of “Switching Profi les” (page 209), select Normal , Car or Meeting and press J (Options). 2. Select Personalise and press J (Select). 3. Select Keypad T ones and press J (Select). 4. Select Original 1 or Original 2 and press J (Select).
Settings 214 Personalising the Sound Effects Set each of the sound effects for turning on/off the power and opening/closing your handset. 1. After Step 2 of “Switching Profi les” (page 209), select Normal , Car or Meeting and press J (Options). 2.
Settings 215 Personalising the Multimedia V olume Set the volume level for messaging, V odafone live! and playing sound data in Data Folder . 1. After Step 2 of “Switching Profi les” (page 209), select Normal , Car or Meeting and press J (Options).
Settings 216 Personalising the Alarm T one Set whether the alarm tone plays for Silent profi le and Meeting profi le. 1. After Step 2 of “Switching Profi les” (page 209), select Silent or Meeting and press J (Options). 2. Select Personalise and press J (Select).
Settings 217 Display Settings Setting the Wallpaper Set a picture preinstalled in your handset or taken with the camera as the wallpaper for standby mode. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Display Settings and press J (Select).
Settings 218 Custom Screens Change the wallpaper and the icons and background of the main menu. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Display Settings and press J (Select). 3. Select Main Display and press J (Select).
Settings 219 Setting the Incoming Display Set a picture to appear on the main display for incoming calls. Y ou can also set whether the other party’ s name appear on the external display for incoming calls. 1. In standby mode, press @ , select Settings and press J (Select).
Settings 220 Setting the Clock Display Setting the Clock T ype Display for the Main Display 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Display Settings and press J (Select). 3. Select Main Display and press J (Select).
Settings 221 Setting Wallpaper & Clock ( External Display) 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Display Settings and press J (Select). 3. Select External Display and press J (Select). 4. Select Wallpaper & Clock and press J (Select).
Settings 222 Setting the Backlights Adjust the brightness and lighting time of the display backlights. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Display Settings and press J (Select). 3. Select Main Display or External Display and press J (Select).
Settings 223 Setting the Display Power Saving Save battery power by setting the handset to turn off the display after a specifi ed time of inactivity elapses. Y ou can also set the display time to 30 seconds, 1 minute or 3 minutes. 1. In standby mode, press @ , select Settings and press J (Select).
Settings 224 Adjusting the Contrast of the External Display Adjust the contrast of the external display to one of nine levels. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Display Settings and press J (Select). 3. Select External Display and press J (Select).
Settings 225 Shortcut Keys This feature allows you to access a function from standby mode easily and quickly by pressing a side key ( P ) or navigation key . Y ou can change the functions accessed. Setting the Side Shortcut Key Function Y ou can change the function accessed if you simply press and hold a side key ( P ) from standby mode.
Settings 226 Setting the Navigation Key Shortcuts Y ou can change the functions accessed when you press the navigation keys A , B , D and C from standby mode. The functions you can set are Shortcut menu (page 254), Phonebook (page 86), Dialled Numbers (page 59) and Received Calls (page 59).
Settings 227 External Light Settings Setting the Notifi cation External Light If you have unchecked information (missed calls, unread messages and V oice Mail), the external light fl ashes when your handset is closed. Y ou can select from three colours for the fl ashing of the external light or set the external light not to fl ash.
Settings 228 Setting the Incoming External Light Y ou can select from fi ve colours for the external light that fl ashes when you have an incoming voice call, video call or message. Y ou can also set the external light not to fl ash. 1. In standby mode, press @ , select Settings and press J (Select).
Settings 229 Offl ine Mode Setting Use offl ine mode to block signal reception and transmission without turning off the power . Offl ine mode disables the use of network ser vices for making and receiving calls, sending and receiving messages, etc.
Settings 230 Answerphone This feature can record a caller’ s message when you are unable to answer a voice call. Y our handset can store up to 3 messages and each message can be up to 15 seconds long. Setting the Answerphone 1. In standby mode, press @ , select Settings and press J (Select).
Settings 231 Playing a Message 1. After Step 3 of “Setting the Answerphone” (page 230), select Recordings and press J (Select). The Message list appears. 2. Select a message and press @ . Setting the Auto Answer Y ou can answer a call without having to press a key while the stereo handsfree headset is connected.
Settings 232 Setting Mute Mute the outgoing voice or both the outgoing voice and incoming voice for calls. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Call Settings and press J (Select). 3. Select Voice Call or Video Call and press J (Select).
Settings 233 Setting the Phone Number 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Call Settings and press J (Select). 3. Select Voice Call and press J (Select). 4. Select Earphone Call and press J (Select). 5. Select On and press J (Select).
Settings 234 One-touch Answering 1. A call is received. 2. Press and hold the switch of the stereo handsfree headset. Short beeps are heard from the earphone and a connection is established. If the caller made a video call, the video call begins. 3. Press and hold the switch of the stereo handsfree headset to end the call.
Settings 235 Using International Call Ser vice When making an international call, you can simply add the international code (Vodafone international access code, 0046 + 010) and then select a countr y code from a list after entering the other party’ s phone number .
Settings 236 Adding an Entry to the Countr y Code List The country code list already includes the countr y codes of 17 countries. Y ou can also edit and add entries. The list can contain up to 20 entries. 1. After Step 4 of “Changing the International Code” (page 235), select Country List and press J (Select).
Settings 237 Setting the Caller ID Set whether to notify the other party of your phone number when you make a call. Automatically Hiding/Showing Caller ID 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Call Settings and press J (Select).
Settings 238 Setting the Earpiece/ Speaker Volume Set the earpiece/speaker volume for voice calls and video calls. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Call Settings and press J (Select). 3. Select Common Settings and press J (Select).
Settings 239 Setting the Open to Answer This feature allows you to answer an incoming call by simply opening your handset. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Call Settings and press J (Select). 3. Select Common Settings and press J (Select).
Settings 240 PIN Codes Set the various PIN code (page 40) settings used for USIM card security . Setting PIN1 Code Request Set whether to request the entering of your PIN1 code to perform verifi cation each time a USIM card is inserted into the handset and the power is turned on.
Settings 241 Cancelling PIN Lock If the PIN1 code or PIN2 code is incorrectly entered three times in a row , the PIN1/PIN2 lock is set. Y ou can cancel the PIN1/PIN2 lock by entering a personal unblocking key code (PUK1/PUK2 code). For details on the personal unblocking key codes, contact Vodafone General Information (page 315).
Settings 242 Phone Lock Set Phone Lock to prevent others from using your handset. When Phone Lock is activated, your security code (page 54) is required to use the handset. Setting Phone Lock 1. In standby mode, press @ , select Settings and press J (Select).
Settings 243 Rejecting Incoming Calls Rejecting Specifi c Incoming Calls Set your handset to reject calls with no Caller ID or calls from phone numbers not in the Contacts list. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Security Settings and press J (Select).
Settings 244 Adding Phone Numbers to the Rejection List Y ou can save up to 20 phone numbers to the Rejection list to reject calls from those phone numbers. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Security Settings and press J (Select).
Settings 245 Rejecting Messages Adding an Email Address or Phone Number to the Rejection List Y ou can add up to 50 email addresses or phone numbers to the Rejection list to reject messages from those email addresses and phone numbers. 1. In standby mode, press @ , select Settings and press J (Select).
Settings 246 Setting Secret Mode Set whether to show Contacts list entries saved as secret (page 82). Set secret mode to On if you want to show secret entries and set secret mode to Off if you want to hide secret entries. 1. In standby mode, press @ , select Settings and press J (Select).
Settings 247 Adding Phone Numbers to the Fixed Dialling Number List The maximum number of phone numbers you can add to the Fixed Dialling Numbers list differs depending on the USIM card. 1. In standby mode, press @ , select Settings and press J (Select).
Settings 248 Hold The hold of your handset allows you to disable the music player keys and side keys to prevent unintentional operations while your handset is closed. Setting the Hold 1. Press and hold R when your handset is closed. The indicator appears on the external display .
Settings 249 Initialising Y our Handset Y ou can delete all saved data such as Contacts list entries, Data Folder fi les and messages, as well as reset all function settings. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Memor y Settings and press J (Select).
Settings 250 Application Settings Set and edit the network connection information for the browser , MMS and other applications individually . Setting the Network Connection Information Y ou can set all the network connection information (network access point, proxy , etc.
Settings 251 Internet Settings Edit the network access point (NAP) information. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Network Settings and press J (Select). 3. Select Internet and press J (Select). 4. Select <Empty> and press J (Add).
Settings 252 Retrieving Network Information Before you can use Vodafone live!, you need to retrieve the network connection information. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Network Settings and press J (Select).
Settings 253 Confi gure the settings for retrieving location information. Saving a Location Information URL Set a map provider for displaying maps from the Contacts list. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Location Settings and press J (Select).
Settings 254 If you assign frequently used functions in the Shortcut menu, you can access them quickly and easily . Setting the Shortcut Menu 1. In standby mode, press A . 2. Select <Empty> and press @ . 3. Press J (Y es). 4. Select a function and press J (Select).
Convenient Functions Y our handset includes v arious convenient functions. In This Chapter ❍ Calendar ❍ Alarms ❍ Dictionar y ❍ Calculator ❍ Converter ❍ Voice Recorder ❍ Countdown Timer ❍ Notepad ❍ Number Memo ❍ World Clock ❍ Backup ❍ Multi T ask ❍ Barcode ❍ Flashlight ❍ Sending T ouch T ones 705T_E.
Convenient Functions 256 Calendar Calendar allows you to save your appointments and use your handset as a scheduler . Adding a New Appointment Y ou can save up to 100 appointments. 1. In standby mode, press @ , select T ools and press J (Select). 2. Select Calendar and press J (Select).
Convenient Functions 257 ◆ Alarm: Set the alarm. Select On and then set the alarm date and time, alarm tone, alarm volume and vibration. After setting the items, press J (Options) and select Save . ◆ Location: Enter the location information (up to 50 characters).
Convenient Functions 258 Checking Appointments 1. In standby mode, press @ , select T ools and press J (Select). 2. Select Calendar and press J (Select). The month view window appears. Press * to switch to the previous month and press # to switch to the next month.
Convenient Functions 259 Managing Appointments Y ou can perform the following operations if you select a date or appointment and press J (Options) from the month, week, day or all appointments view . ◆ View: Display the details of the selected appointment.
Convenient Functions 260 Set an alarm to play at a certain time. 1. In standby mode, press @ , select T ools and press J (Select). 2. Select Alarm and press J (Select). 3. Select an alarm and press J (Select). 4. Select On and press J (Select). The alarm settings window appears.
Convenient Functions 261 ◆ Repeat: Set the alarm to repeat at a specifi ed interval. Select one of the following items and press J (Select). • Everyday: Start the alarm ever yday . • Weekdays: Start the alarm each day from Monday to Friday . • Select Day: Specify which days to start the alarm.
Convenient Functions 262 Look up the meaning of words in an electronic dictionary . 1. In standby mode, press @ , select T ools and press J (Select). 2. Select Dictionar y and press J (Select). 3. Select a dictionary and press J (Select). Japanese: Input a Japanese word (kanji or reading) to look up its meaning in Japanese.
Convenient Functions 263 Use your handset as a calculator . 1. In standby mode, press @ , select T ools and press J (Select). 2. Select Calculator and press J (Select). Follow the onscreen instructions to enter digits. Press * to enter a decimal point and use N to switch between + and -.
Convenient Functions 264 Converter Set a currency exchange rate and then perform currency conversion calculations. 1. In standby mode, press @ , select T ools and press J (Select). 2. Select Converter and press J (Select). 3. Select the Exchange rate input fi eld and enter the exchange rate.
Convenient Functions 265 V oice Recorder The voice recorder allows you to record sound and then save the recording data to the Recordings folder in the Melody&Music folder of Data Folder .
Convenient Functions 266 Playing Recordings 1. In standby mode, press @ , select T ools and press J (Select). 2. Select Voice Recorder and press J (Select). 3. Select Recordings and press J (Select). The contents of the Recordings folder in the Melody&Music folder of Data Folder appear .
Convenient Functions 267 Countdown T imer Y ou can set an alarm to notify you when a certain amount of time elapses. The alarm plays for approximately one minute. 1. In standby mode, press @ , select To o l s and press J (Select). 2. Select Countdown Timer and press J (Select).
Convenient Functions 268 Notepad Use your handset as a notepad for storing text input. Y ou can also access the saved data during character input and editing. Y ou can enter up 256 characters for each memo and store up to 20 memos in the notepad. 1. In standby mode, press @ , select T ools and press J (Select).
Convenient Functions 269 Number Memo Use the keypad to take a memo of a phone number or other number during a voice or video call. After the call ends, you can save the number to the Contacts list or use it to create a message or make a call. T aking a Memo of a Phone Number 1.
Convenient Functions 270 W orld Clock World Clock Viewer allows you to check the date and local time in major cities around the world, as well as the time difference. 1. In standby mode, press @ , select T ools and press J (Select). 2. Select World Clock and press J (Select).
Convenient Functions 271 Backup Note Do not use a PC or other device to view or change a backup fi le in a memory card. The fi le may be damaged. Backing Up Data to a Memor y Card 1. Insert a memory card in the slot of your handset. 2. In standby mode, press @ , select T ools and press J (Select).
Convenient Functions 272 Restoring Data from a Memor y Card 1. Insert a memory card in the slot of your handset. 2. In standby mode, press @ , select T ools and press J (Select). 3. Select Backup and press J (Select). 4. Select Restore and press J (Select).
Convenient Functions 273 Multi T ask Note • Multi task cannot be used while a V-appli (except for Screensaver) is running. • Another application may not be able to be started while some applications are running. • The following applications can be started from the Multi T ask window .
Convenient Functions 274 Barcode The camera allows you to scan barcodes (QR codes). Y ou can connect to a URL included in the scanned information or create a message to send to an address included in the scanned information. Y ou can save up to ten scanned data items.
Convenient Functions 275 Tip • If the scanned data begins with MAIL TO:, press a @ after Step 4 to create an SMS/MMS message. If it begins with MEMORY :, you can save it to the Contacts list (page 79).
Convenient Functions 276 Saved Barcodes 1. After Step 2 of “Scanning a Barcode” (page 275), press J (Options). 2. Select Scanned Data List and press J (Select). 3. Select a scanned data and press @ . The barcode data appears. For details on the operations you can perform while barcode data is displayed, see “Scanning a Barcode” (page 275).
Convenient Functions 277 When the Flashlight function has been assigned to a side key ( P ) in the shortcut settings (page 225), you can turn on the mobile light if you press and hold the side key ( P ). 1. Press and hold a side key ( P ). The mobile light turns on and remains lit while you hold the side key ( P ).
Convenient Functions 278 Send touch tones to use interactive voice response services and other types of touch- tone services. Sending Individual T ouch T ones 1.
Convenient Functions 279 Sending T ouch T ones 1. Open a Contacts list entry containing the touch tones. 2. Press N . A call is made to the phone number before the fi rst “P .” 3. Press J (T one). The sequence of touch tones before the next “P” is sent.
File T ransfer In This Chapter ❍ Bluetooth™ ❍ USB Cable Y ou can use Bluetooth™ or a USB cable to transfer data between your handset and other handsets, PCs and other devices.
File T ransfer 281 Note The USB functions cannot be started or set during Bluetooth ™ communication. If a USB cable is connected, Bluetooth™ communication ends. Bluetooth™ T ransfer the data of the Contacts List, Calendar and Data Folder between your handset and Bluetooth™ compatible PCs and handsets.
File T ransfer 282 Registering a Bluetooth™ Enabled Device Before establishing a Bluetooth™ connection, you need to search then register the Bluetooth™ enabled device. Y ou can register up to 20 detected Bluetooth™ devices. 1. After Step 3 of “Activating Bluetooth™” (page 281), select Paired Devices and press J (Select).
File T ransfer 283 Displaying Details of a Registered Bluetooth™ Compatible Device Display the device name, device address, device class and supported profi les of a Bluetooth™ compatible device. 1. After Step 3 of “Activating Bluetooth™” (page 281), select Paired Devices and press J (Select).
File T ransfer 284 Response to Detection by Other Bluetooth™ Compatible Devices 1. After Step 3 of “Activating Bluetooth™” (page 281), select My Phone ID and press J (Select). 2. Select Visibility and press J (Select). 3. Select Show My Phone or Hide My Phone and press J (Select).
File T ransfer 285 Changing the Name of Y our Handset Y ou can change the name displayed on another Bluetooth™ compatible device when your handset is detected. 1. After Step 3 of “Activating Bluetooth™” (page 281), select My Phone ID and press J (Select).
File T ransfer 286 Using Bluetooth™ for Receiving Data When Bluetooth™ is activated (page 281), you can receive data. 1. Press J (Y es) when a confi rmation window appears after a connection request is received from a Bluetooth™ compatible device in the vicinity .
File T ransfer 287 Setting Handsfree Y ou can set the mode for making and receiving calls while a handsfree compatible device is connected. 1. After Step 3 of “Activating Bluetooth™” (page 281), select My Phone ID and press J (Select). 2. Select Handsfree Setting and press J (Select).
File T ransfer 288 Use a USB cable to connect your handset to a PC and then exchange Contacts list, Calendar and Data Folder fi les. Y ou can also use the supplied music transfer software to transfer music fi les and playlists from a PC to the memory card of your handset.
File T ransfer 289 T ransferring Music from a PC to a Memory Card T ransfer music fi les and playlists from a PC to a memory card. Before connecting the USB cable, install the music transfer software (included in the supplied CD-ROM) on your PC.
File T ransfer 290 Switching to Music T ransfer Mode from the Main Menu Switch to music transfer mode from the main menu. 1. In standby mode, press @ , select Settings and press J (select). 2. Select Connectivity and press J (Select). 3. Select USB and press J (Select).
File T ransfer 291 Setting Display of the Music T ransfer Mode Confi rmation Window Set whether to display the confi rmation window for switching to music transfer mode (page 289). 1. In standby mode, press @ , select Settings and press J (Select). 2.
File T ransfer 292 Using a USB Cable for Receiving Data Receive data to the Contacts list, Calendar and Data Folder . 1. After Step 6 of “Using a USB Cable for Sending Data” (page 291), follow the instructions on the PC to send data from the PC to your handset.
File T ransfer 293 Using a USB Cable for Charging While your handset is on, you can charge the batter y pack if you connect your handset and a PC using a USB cable. 1. In standby mode, press @ , select Settings and press J (Select). 2. Select Connectivity and press J (Select).
Appendix In This Chapter ❍ Default Settings ❍ T roubleshooting ❍ Storage Capacity ❍ Main Specifi cations ❍ Glossar y ❍ Index ❍ Warranty & After Sales Service ❍ Customer Ser vice 705T_E.indb 294 705T_E.indb 294 06.6.5 8:55:51 PM 06.
Appendix 295 Def ault Settings Function Name Default Setting Page Entertainment V-appli Screensavers: Off, Set T ime (Start T ime: 3 sec, Duration: No T imeout), Priority Settings (Voice Calls: Voice .
Appendix 296 Function Name Default Setting Page Camera Video Settings Video Quality: Normal, Effects: Off, Preview: On, Screen Display: Normal, Controller Display: On, File Name: Date&Time, Start/.
Appendix 297 Function Name Default Setting Page T ools Calendar Appointment: Unset, Alarm (Alarm: Off, Alarm T one: Pattern 1, Alarm Volume: Level 3, Vibration: Pattern 1), Lock Calendar: Off, Holiday.
Appendix 298 Function Name Default Setting Page Mode Settings Normal (Default) Ringtone Volume: Level 3, Assign Ringtone: Pattern 1, Ringtone Duration: 5 sec, Vibration: Off, Keypad Volume: Level 3, Ke ypad T ones: Original 1, Sound Effects Vol.
Appendix 299 Function Name Default Setting Page Phone Settings Shortcuts Side Up Key: Profi le Switch, Navigation Keys ( a A : Shortcut Menu, a B : Phonebook, D : Dialled Numbers, a C : Received Call.
Appendix 300 Function Name Default Setting Page Security Settings Change Password − 241 Phone Lock Phone Closed: Off, Power Saving: Off, Power On: Off 242 Reject Calls Hidden: Off, Public Phone: Off, Unavailable: Off, Unknown: Off, Select Contact: Off (Unset) 243-244 Reject Addresses Off (Unset) 245 Secret Mode Off 246 Fixed Dialling No.
Appendix 301 Function Name Default Setting Page Call Log Dialled Numbers −5 9 Missed Calls − Received Calls − Call Timers Last Call Time: 000:00:00, All Calls Time: 000:00:00 60 Call Costs Last .
Appendix 302 T roubleshooting Problem Possible Causes and Remedies Cannot turn the power on. • Is the battery pack inserted properly (page 42)? • Is the battery charged (pages 35, 37, 43)? Cannot charge the battery .
Appendix 303 Problem Possible Causes and Remedies Cannot receive voice and video calls. • Is Reject Calls (page 243) set? • Is Voicemail (page 63) or Call Diverting (page 65) set to All Calls ? • Is Call Barring (page 67) set? Cannot send messages.
Appendix 304 Storage Capacity Data Folder Data Folder Up to 40 MB* *The V-appli Library shares its memor y with Data Folder . Mail Mailbox* Up to 7 MB Received Msgs.
Appendix 305 the service area or where it is diffi cult to receive a signal (in a building, vehicle, bag, etc.), this time may be reduced to half or less. This time may also be affected by other factors such as the operating environment (battery state, temperature, etc.
Appendix 306 Glossar y T erm Defi nition 3G/UMTS A third generation (3G) mobile communication system. UMTS is the 3G mobile communication system of Europe. GSM A wireless system for digital handsets. GSM is the predominant system in Europe and Asia, and is the world ’ s most widely used system.
Appendix 307 T erm Defi nition Server Certifi cate A digital certifi cate for identifying that a site on a server is trustworthy . The server certifi cate includes information necessary for SSL co.
Appendix 308 Index Numeric 3D Pictogram Display 164 A accessories 2 Adding a New Appointment 256 Alarm T one 216 Alarms 260 Answerphone Playing a Message 231 Recording 56 Setting 230 Any Key Answer 23.
Appendix 309 Copying Entries to the USIM Card 206 Countdown Timer 267 Creating & Sending Message (MMS) 148 Creating & Sending Message (SMS) 159 Creating a vObject 201 Custom Screens 218 Custom.
Appendix 310 Manage Folder 166 Managing Appointments 259 Media Player 96 Media Player Settings 102 Melody&Music 193 Memory Card 44, 202 Memory Manager 179 Missed Calls 59 MMS 148 MMS Settings 157 .
Appendix 311 Recording Videos 132 Registering a Bluetooth™ Enabled Device 282 Rejecting Incoming Calls 56, 243 Rejecting Messages 245 Reply 166 Reset Settings 90, 184 Response to Detection by Other .
Appendix 312 Video Size 133 vObjects 200 Vodafone live! 172 Vodafone live! CAST 187 Voicemail 63 Voice Recorder 265 During a Call 58 Playing Recordings 266 Recording Sound 265 W Wallpaper 217 WAP Push.
Appendix 313 Warranty & After Sales Service Warranty A warranty card is included with the handset. Carefully read the card and check that the store name and purchase date sections have been fi lled in correctly .
Appendix 314 Note • Data and settings may be lost or altered as a result of failure or repair of your handset. It is, therefore, recommended that you keep a backup copy of important data such as Contacts list data.
Appendix 315 Customer Ser vice If you have any questions about a Vodafone handset or ser vice, please call General Information. For service or handset repairs, please call Customer Assistance. Vodafone Customer Centres From a Vodafone handset, dial toll free at 157 for General Information or 113 for Customer Assistance.
デバイスToshiba 705Tの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Toshiba 705Tをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba 705Tの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba 705Tの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba 705Tで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba 705Tを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba 705Tの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba 705Tに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba 705Tデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。