ToshibaメーカーC660の使用説明書/サービス説明書
ページ先へ移動 of 153
computers.tosh iba-europe.com User ’ s Manual C660/C660D.
User ’s Manual ii C660/C660D T able of Content s Chapter 1 Getting St arted Equipment ch ecklist . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Getting S t arted . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual iii C660/C660D Chapter 4 Operating Basics Using the T ouch Pad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Web Camera . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual iv C660/C660D Appendix A S pecifications Appendix B Display Controller and Vi deo mode Appendix C Information for Wireless Devices Appendix D AC Power Cord and Connectors Appendix E L.
User ’s Manual v C660/C660D Copyright © 2010 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No p at ent liability is assumed, with respect to the use of the information contained herein.
User ’s Manual vi C660/C660D EU Declar atio n of Confor mity This product is carrying the CE-Ma r k in accordance wi th the relate d European Directives.
User ’s Manual vii C660/C660D ■ Interference with other devices or machines in the near surrounding area. ■ Malfunction of, or data loss from, th is product ca used by disturbances generated by other de vices or machin es in the near surrounding are a.
User ’s Manual viii C660/C660D Disposal of batteries a nd/or accumu lators Disposing of the computer and the computer's batteries ■ Discard this compu ter in acco rdance with appli cable laws and regulations. For further information, cont act y our local government.
User ’s Manual ix C660/C660D Following information is only for T urkey: ■ Compliant with EEE Regulations: T oshiba meets all requirements of T urkish regulation 26891 “Restriction of the use of certain hazardous substances in electrical and electroni c equipment”.
User ’s Manual x C660/C660D Optical disc drive safety instructions Panasonic System Netw orks ■ DVD Super Multi UJ8A0 Be sure to check the precautions at the end of this section.
User ’s Manual xi C660/C660D HIT ACHI-LG Data S torage, Inc. ■ DVD Super Multi GT30N/GT30F TOSHIBA SAMSUNG ST ORAGE TECHNOLOGY ■ DVD Super Multi TS-L633 F/TS-L633W Hitachi-LG Data Storage, Inc.
User ’s Manual xii C660/C660D Precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT .” T o use this model properly , read the instruction manual carefully and kee p this manual for your future referenc e.
User ’s Manual xiii C660/C660D Preface Congratulations on your purchase of the C66 0/C660D computer . This powerful notebook computer provides excellent expansion capability , includes multimedia functionality , and is designed to provide years of reliable, high-performan ce computing.
User ’s Manual xiv C660/C660D Icons Icons identify ports, dials, and other parts of your computer . The indicator pane l also uses ic ons to identify th e component s it is pro viding info rmation on. Keys The keyboard keys are used in th e te xt to describe many computer operations.
User ’s Manual xv C660/C660D T erminology This term is defined in this document as follows: Start The word " Sta rt " refers to the " " button in Windows ® 7. HDD or Hard disk drive Some models are equip ped with a "So lid S tate Drive (SSD)" instead of a hard disk drive.
User ’s Manual xvi C660/C660D General Precautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . Ho wever , cert ain precautions should be observed to further reduce the risk of personal injury or damag e to the computer .
User ’s Manual xvii C660/C660D ■ Equipment that generate s a strong electromagnetic field, such as stereo speakers (other tha n speak ers that are connected to the computer) or speakerphones. ■ Rapid changes in temperature or hu midity and source s of temperature change such as air conditioner vents or heaters.
User ’s Manual xviii C660/C660D Instruction Manual for Safety an d Comfort All important information on the safe and proper use of this computer is described in the enclosed Instru ction Manual for Safety and Comfort . Be sure to read it before using the co mputer .
User ’s Manual 1-1 Getting S tarted Chapter 1 Getting S t arted This chapter provides an equ ipment checklist, and basic informa tion to start using your computer . Equipment checklist Carefully unpack your comp uter , t aking care to save the box and packaging materials for future use.
User ’s Manual 1-2 Getting S tarted ■ TOSHIBA Disc Creator ■ TOSHIBA Face Recognition (Is preinstalled with some models) ■ TOSHIBA Bulletin Board ■ TOSHIBA ReelT ime ■ TOSHIBA Resolution+ Plug-in For Windows Media Player ■ TOSHIBA S pee ch System (Is preinstalled with some models.
User ’s Manual 1-3 Getting S tarted Connecting the A C adaptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power .
User ’s Manual 1-4 Getting S tarted 1. Connect the power cord to the AC adaptor . Connecting the power cord to the AC adaptor (2-pin plug) Connecting the power cord to the AC adaptor (3-pin plug) 2. Connect the AC adaptor ’s DC output plug to the DC IN 19V jack on the right of the computer .
User ’s Manual 1-5 Getting S tarted Opening the disp lay The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the mai.
User ’s Manual 1-6 Getting S tarted T urning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring the power con dition section in Chapter 6, Power and Power-Up Modes for more information.
User ’s Manual 1-7 Getting S tarted Shut Down Mode When you turn off the power in Shut Do wn Mode no data will be saved and the computer will boot to the opera ting system's main screen the next time it is turned on. 1. If you have entered data, either save it to the hard disk drive or to other storage media.
User ’s Manual 1-8 Getting S tarted Benefits of Sleep Mode The Sleep Mode feature provide s the following benefits: ■ Restores the previous workin g environment more ra pidly than does the Hibernation Mode feature.
User ’s Manual 1-9 Getting S tarted Sleep Mode limitations Sleep Mode will not function under the following conditions: ■ Power is turned back on immediately after shutting down. ■ Memory circuits are exposed to st atic electricity or electrical noise.
User ’s Manual 1-10 Getting S tarted Automatic Hibernation Mode The computer can be configured to ent er Hibernation Mode auto matically when you press the power button or clos e the lid. In order to define these settings, you can follow the steps as described below: 1.
User ’s Manual 1-1 1 Getting S tarted System Recovery Options and Restoring the pre-inst alled sof twa re There is a hidden partition allocated on the hard disk drive for the System Recovery Options. This partition stores files which can be used to repair the syst em in the event of a problem.
User ’s Manual 1-12 Getting S tarted Creating Optical Reco very Discs This section describes how to create Recovery Discs. A recovery image of the software on your computer i s stored on the hard disk drive, and can be copied to DVD media by using the following steps: 1.
User ’s Manual 1-13 Getting S tarted Restoring the pre-in sta lled sof tw are from the Reco very hard disk drive A portion of the total hard disk dr ive space is configured as a hidden recovery partition. This p artition stores files which can be used to restore pre-installed software in the event of a problem.
User ’s Manual 1-14 Getting S tarted Restoring the pre-inst alled softw are from your crea ted Recovery Discs If the pre-installed files are damaged , you are able to either use the Recovery Discs you have created or the hard disk drive recovery proce ss to restore the computer to the state it was in when you originally received it.
User ’s Manual 2-1 The Grand T our Chapter 2 The Grand T our This chapter identifies the vari ous components of the computer - it is recommended that you become familiar with each before you operate th e computer . Front with the display closed The following figure shows the computer ’s front with it s display panel in the closed position.
User ’s Manual 2-2 The Grand T our Lef t side The following figure shows the comp uter ’s left side. The left side of the computer Keep foreign metal object s, such as sc rews, staples and paper clips, out of the Bridge media slot.
User ’s Manual 2-3 The Grand T our Right side The following figure shows the comp uter ’s right side. The right side of the computer Universal Serial Bus (USB 2.0) ports T wo Universal Serial Bus ports, which comply to the USB 2.0 standard, are provide d on the left hand side of the computer .
User ’s Manual 2-4 The Grand T our Back The following figure shows the comp uter ’s back. The back of the computer Underside The following figure shows the undersi de of the computer . Y ou shou ld ensure that the disp lay is closed befo re the computer is turned over to avoid causing any damage.
User ’s Manual 2-5 The Grand T our Battery pack The battery pack provides power to the computer when the AC adaptor is not con nected. For more detailed information on the use and operation of the battery pack please refer to Chapter 6, Power and Power-Up Modes .
User ’s Manual 2-6 The Grand T our Front with the display op en This section shows the computer with the display panel open. In order to open the display , lift the display panel up and position it at a comfortable viewing angle for you. The front of the computer with the display panel open * Provided with some models.
User ’s Manual 2-7 The Grand T our Web Ca me r a Web Ca me ra is a device that allows you to record video or take photographs with your computer . Y o u can use it for video chatting or video conferences using a communicatio n tool such as Windows Live Messeng er .
User ’s Manual 2-8 The Grand T our Indicators This section explains ind icator functions. System indica tors LED system indicators next to their resp ective icons, glow when specific computer operations are in progress. System indicators T ouch Pad The T ouch Pad l ocated in the palm rest is used to control the movement of the on-screen pointer .
User ’s Manual 2-9 The Grand T our Keyboard indicators The following figures show the position s of the CAPS LOCK indicator and the NUM LOCK indicator which show the following conditi ons: ■ When the CAPS LOCK indicator glows, the keyboard will produce capitals when any letter is typed.
User ’s Manual 2-10 The Grand T our Optical disc drive The computer is installed with a DVD Super Multi d rive. A Serial A T A interface controller is used for optica l disc opera tion. When the computer is accessing a optical disc, an indicator on the drive glows.
User ’s Manual 2-1 1 The Grand T our DVD Supe r Multi drive The full-size DVD Super Multi drive module lets you record data to rewritable CD/DVDs as well as run ei ther 12 cm (4.
User ’s Manual 2-12 The Grand T our The AC adaptor (3-pin plug) ■ Depending on the mo del in question, either a 2-pin or 3-pin adaptor/power lead will be bundled with the computer.
User ’s Manual 3-1 Hardware, Utilities and Options Chapter 3 Hardware, Utilities and Options Hardware This section describes the hardware of your computer . The actual specifications may vary depending on the model you purchased. Processor Memory CPU The processor type vari es depending on the model.
User ’s Manual 3-2 Hardware, Utilities and Options Power Video RAM The memory in a computer's graphics adaptor , used to store the image displayed on a bitmap display . The amount of Vide o RAM avail able is dependent on the computer's system me mory .
User ’s Manual 3-3 Hardware, Utilities and Options Disks Optical disc drive Display The computer's internal disp lay panel supports high-resolution video graphics and can b e set to a wide range of viewing angl es for maximum comfort and readability .
User ’s Manual 3-4 Hardware, Utilities and Options In this control panel, 1. Click Power and then click Power Features . 2. Select On battery from the drop-down menu in Graphics Power Plan Settings and then select the Display Power Saving T echnolog y check box.
User ’s Manual 3-5 Hardware, Utilities and Options Sound Multimedia Communications Sound system The integrated sound system provides suppo rt for the computer's internal speakers and microphone, as well as allowing an external microphone and headphones to be connected via the appr opriate jacks.
User ’s Manual 3-6 Hardware, Utilities and Options Sp ecial features The following features are eithe r un ique to TOSHIBA computers or are advanced features which ma ke the computer more con venient to use. Access each function using the following proce dures.
User ’s Manual 3-7 Hardware, Utilities and Options Utilities and Applications This section describes the pre-installed uti lities that come with the computer and details how to start them. For further information on their operation, you may refer to each utili ty's online manua l, help files or README.
User ’s Manual 3-8 Hardware, Utilities and Options Y ou may not have all the utilities or applications listed below depe nding on the model you purchase d. TOSHIBA Power Saver TOSHIBA Power Saver provides you with the features of more various po wer supply managements.
User ’s Manual 3-9 Hardware, Utilities and Options TOSHIBA VIDEO PLA YER This software is provided for playback of DVD Video. It has an on-screen interface and functions. Click Start All Programs TOSHIBA VI DEO PLA YER TOSHIBA VIDEO PLA YER .
User ’s Manual 3-10 Hardware, Utilities and Options TOSHIB A Bulletin Board Bulletin Board is a convenie nt place to pin things to visually organize in a fun and creative way . Simply drag and drop your favorite p ictures, files or notes to pin them on the Board.
User ’s Manual 3-1 1 Hardware, Utilities and Options Optional devices Optional devices can expand the computer's capabilities and its versatility .
User ’s Manual 3-12 Hardware, Utilities and Options Examples of memory media Memory media This section provides the important safety precautions in order to handle your memory media.
User ’s Manual 3-13 Hardware, Utilities and Options Memory media format New medi a cards ar e formatte d accordi ng to specific standards. If you wish to reformat a media card, be sure to do so with a device that uses media cards.
User ’s Manual 3-14 Hardware, Utilities and Options About the write-protect The following memory media ha ve a function for protect. ■ SD Card (SD memory card, SDHC memory card, SDXC memory card) ■ MultiMediaCard (MMC) Ins er tin g a me mory media The following instru ctions apply to all types of supported media device s.
User ’s Manual 3-15 Hardware, Utilities and Options 3. Pull the memory media to partia lly extend it out of the computer . 4. Grasp the media and remove it. Removing memory media Additional mem ory modu le Y ou can install additional memory into the computer in order to increase the amount of system memory that is avai lable.
User ’s Manual 3-16 Hardware, Utilities and Options Installing a memory module T o install a memory module, follow the steps as detailed below: 1. Shut down the compu ter - make su re the Power indicator is off (refer to the T urning off the pow er section in Chapter 1, Getting Started if required).
User ’s Manual 3-17 Hardware, Utilities and Options Removing the memory module cover 7. Align the notch of the memory modul e with that of the memory slo t and gently insert the module in to the slot at about a 45 d egree angle before holding it down until the latches on either side snap into place.
User ’s Manual 3-18 Hardware, Utilities and Options 8. Seat the memory module cover in place and secure it with the screws. Seating the memory module cover 9. Install the battery pa ck - refer to Replacing the battery pack section in Chapter 6, Power and Power-Up Modes , if requ ired.
User ’s Manual 3-19 Hardware, Utilities and Options 4. T urn the computer upside down and remove the battery pack (refer to Replacing the battery pack section in Chapter 6 , Power and Power-Up Modes , if required).
User ’s Manual 3-20 Hardware, Utilities and Options Connecting the monitor cable 1. T urn the computer's power off. 2. Connect the monitor cable to the external monitor port. Connecting the monitor cable to the exte rnal monitor port 3. T urn the external monitor's power on.
User ’s Manual 3-21 Hardware, Utilities and Options Security lock A security locks enable you to ancho r your computer a desk or other heavy object in order to help prevent unautho rized removal or theft.
User ’s Manual 3-22 Hardware, Utilities and Options Battery Pack An additional battery pack can be purchased for use as either a spare or replacement. Please refer to Chapte r 6, Power and Power-Up Modes for further information. High Cap acity Battery Pack An additional battery pack can be purchased for use as either a spare or replacement.
User ’s Manual 4-1 Operating Basics Chapter 4 Operating Basics This chapter describes the basic operations of your computer , highlights the precautions that should be taken when using it. Using the T ouch Pad T o use the T ouch Pa d, simply touch and move your fingerti p across it in the direction you want the on-screen pointer to go.
User ’s Manual 4-2 Operating Basics We b C a m e r a Web Camera is a device that allows you to record video or take photographs with your compute r . Y ou can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger .
User ’s Manual 4-3 Operating Basics Disclaimer T oshiba does not guarantee that the face recogni tion utility technology will be completely secure or error-free. T oshiba does not guarantee that the face recognition utility will accurately screen out unauthorized users at all times.
User ’s Manual 4-4 Operating Basics 2. Click the Register bu tton. The Registration screen is displayed. ■ If you wish to practice, click on the Next button in the Registration screen. ■ If you do not wish to practice, click on the Skip button in the Registrati on screen.
User ’s Manual 4-5 Operating Basics How to lau nch the help fi le For further information on this ut ility , please refer to help fi le. 1. T o launch the help file, click Sta r t All Programs TOS H IB A Utilities Face Recognition Help .
User ’s Manual 4-6 Operating Basics ■ If authentication was successful, but an authentication e rror subsequently occurred during the log in to Windows, you will be asked to pr ovide your account in formatio n. Using the optical disc drive The full-size drive provides high- performance execu tio n of CD/DVD-based programs.
User ’s Manual 4-7 Operating Basics Inserting a disc 4. Press gently at the center of the disc until you feel it click into place. T he disc should li e below the top of the spindle, flu sh with the spindl e base. 5. Push the center of the disc tray to close it.
User ’s Manual 4-8 Operating Basics Manual release with the eject hole W riti ng CD/ DVDs Y ou can use the DVD Super Multi drive to write data to either CD-R, CD- RW , DVD-R, DVD-R (Dual Layer), DVD-RW , DVD+R, DVD+R (Double Layer), DVD+RW or DVD-RAM discs.
User ’s Manual 4-9 Operating Basics Import ant message Before you write or rewrite to an y of the media supported by the DVD Super Multi drive, please read and follow all of the setup and operati ng instructions in this section.
User ’s Manual 4-10 Operating Basics ■ If the disc is poor in quality , or is dirty or damaged, wr i ting or rewriting errors may be noted - ensure that you check a ll discs for dirt or damage before you use them.
User ’s Manual 4-1 1 Operating Basics ■ There are two types of DVD-R media available, au thoring discs and general use discs. Do not attemp t to use authoring discs as only general use discs can be writte n to by a computer drive.
User ’s Manual 4-12 Operating Basics ■ Y o u should always write from the com puter's hard disk drive onto the CD/DVD - do not try to write from sh ared devices such a s a server or any other network device.
User ’s Manual 4-13 Operating Basics ■ Y o u cannot use TOSHIBA Disc Creator's "Audio CD" functio n to record music to DVD-R, DVD-R (Dua l Layer), DVD-RW , DVD+R, DVD+R (Double Layer) or DV D+R W media.
User ’s Manual 4-14 Operating Basics Data V erification T o verify that data has been written or rewritten correctly to a data CD/DVD you should follow the steps below before you begin the write/rewri te process: 1.
User ’s Manual 4-15 Operating Basics ■ It is recommended the AC adaptor be connected wh en playing DVD- Video. Power saving features ma y interfere with smooth playback. When playing DVD-Video using battery power , set the Power Options to "Balan ce".
User ’s Manual 4-16 Operating Basics ■ Do not change the screen resolution while running the "TOSHIBA VIDEO PLA YER". S tarting TOSHIBA VIDEO PLA YER Use one of the following procedures to start "TOSHIBA VIDEO PLA YER". 1. Insert a DVD-Video in the DVD Super Multi drive while Windows 7 is running.
User ’s Manual 4-17 Operating Basics Media care This section provides tips on protecting data stored on your CDs and DVDs. Handle your media with care. Followi ng the simple precautions listed below will increase the life time of your media and protect the data stored on it.
User ’s Manual 4-18 Operating Basics T o launch the configura tion dialog window for system sounds, follow the steps below . 1. Right-click the Speakers icon on the T askbar . 2. Select Sounds from the menu. Adjusting Microphone Le vel Follow the steps below to change the microphone recording level.
User ’s Manual 4-19 Operating Basics Wireless LAN The Wireless LAN is compatible wit h other LAN systems based on Direct Sequence S pread S pectru m / Orthogonal Frequency Division Multiplexin g radio technology that complies with the IEEE802.1 1 Wireless LAN standard.
User ’s Manual 4-20 Operating Basics Setting 1. Please make sure that the Wireless Communi cation function is on. 2. Click Start Control Panel Network and Internet Network and Sharing Center . 3. Click Set up a new connecti on or network .
User ’s Manual 4-21 Operating Basics Enable/Disa ble W ireless com mu nication Y ou can enable or d isable Wi reless commun ication fu nctions by pressing FN + F8 .
User ’s Manual 4-22 Operating Basics 1. T urn off the power to the computer and to all external devices connected to the computer . 2. Plug one end of the cable into t he LAN jack. Press gently until yo u hear the latch click into place. Connecting the LAN cable 3.
User ’s Manual 4-23 Operating Basics Cleaning the compu ter T o help ensure long, troub le-free oper ation, keep the computer free o f dust and dirt, and u se care with a ll liquids arou nd it. ■ Be careful not to spill liquids into the comp uter .
User ’s Manual 4-24 Operating Basics Heat dispersal T o protect against overheating, the processor is equipped with an internal temperature sensor which activates a co oling fan or lowers the processin g speed if the computer's internal temper ature rises t o a cert ain le vel.
User ’s Manual 5-1 The Keyboard Chapter 5 The Keyboard The computer ’s keyboard layouts ar e compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhance d keyboard functions can be performed on the computer .
User ’s Manual 5-2 The Keyboard Function keys: F1 … F9 The function keys (not to be confused with the special FN key) are the nine keys at the top of your keyboard - these keys function differently from other keys.
User ’s Manual 5-3 The Keyboard Power Plan: Pressing FN + F2 changes the power settin gs. Sleep: Pressing FN + F3 switches the system to Sleep Mode. Hibernate: Pressing FN + F4 switches the system to Hibernation Mode. Output: Pressing FN + F5 changes the active display device.
User ’s Manual 5-4 The Keyboard Zoom: Pressing FN + Sp ace changes the display resolution. TOSHIBA Zooming Utility (reduce): Pressing FN + 1 reduces the icon size on the desktop or the font sizes wi thin one of the supported applica tion windows.
User ’s Manual 5-5 The Keyboard Generating ASCII charact ers Not all ASCII characters can be generated using norma l keyboard operation, but you are a ble to generate the se characters using their specific ASCII codes. 1. Hold down AL T key . 2. Using the numeric keypad, type the ASCII code of the character you require.
User ’s Manual 6-1 Power and Power-Up Modes Chapter 6 Power and Power-Up Modes The computer's powe r resources include the AC adaptor , battery pack and any internal batteries.
User ’s Manual 6-2 Power and Power-Up Modes T able 6-1 Power conditions continued Monitoring the po wer co ndit ion As shown in the below table, the DC IN/Battery and Power indica tors on the system indicator alert you to the computer ’s operating capability and battery charge status.
User ’s Manual 6-3 Power and Power-Up Modes Power i ndica tor Check the Power indicator to determine the pow er status of the computer - the following indicator conditions shou ld be noted: Battery This section explai ns battery types, use, recharging me thods and handling.
User ’s Manual 6-4 Power and Power-Up Modes Y ou can change the Real T ime Clock settings by turning the computer on while pressing the F2 key and then release the F2 key when the TOSHIBA Leading Innovation >>> screen appears. Please refer to Chapter 8 T roub leshooting for further information.
User ’s Manual 6-5 Power and Power-Up Modes Charging the batteries When the power in the battery pack becomes low , the DC IN/Battery indicator will flash amber to indicate that only a few minutes of battery power remain.
User ’s Manual 6-6 Power and Power-Up Modes Monitoring battery ca p acity Remaining battery power can be monitored using the following methods. ■ Clicking the battery icon on the T askbar ■ Via .
User ’s Manual 6-7 Power and Power-Up Modes Extending battery life T o maximize the life of your battery p acks: ■ At least once a mo nth, disconnect the computer from a power source and operate it on battery powe r until the battery pack fully discharges.
User ’s Manual 6-8 Power and Power-Up Modes Removing the battery pa ck T o remove a discharged battery , follow the steps as det ailed below: 1. Save your work. 2. T urn the computer's power off - ensure that the Power indicator is off. 3. Remove all cables and peri pherals that are connected to the computer .
User ’s Manual 6-9 Power and Power-Up Modes Password Utility The password utility allows you to mainta in an addi tional level of security and provides two levels of password security: User and Supervisor .
User ’s Manual 6-10 Power and Power-Up Modes Power-up modes The computer has three differ ent power-up modes as follows: ■ Shut Down Mode: T he computer will s hut d own without saving data - in view of this you must always save your work before you turn the computer of f.
User ’s Manual 7-1 HW Setu p Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup program to configure your computer , and provides information on settings for various functions. Accessing HW Set up T o run the HW Setup progra m, click Star t All Program s TOSH IB A Utilities HWSetup .
User ’s Manual 7-2 HW Setu p Password This option allows you to set or reset the user password for power on. User Password Lets you register a new password or change/remove an existing password. T o enter a user password: 1. Select Registered to displa y the following prompt: Enter Password: Enter a password.
User ’s Manual 7-3 HW Setu p Power On Display This tab allows you to select the display to be used when the computer is started. Please note that this setting is only available on standard VGA mode and is not available as part of the Windows De sktop properties.
User ’s Manual 7-4 HW Setu p T o change the boot drive, follow the steps below . 1. Hold down F12 and boot the computer . when the TOSHIBA Leading Innovation >>> screen appears, release the F12 key . 2. Use the up and down cursor keys to select the boot device you want and press ENTER .
User ’s Manual 7-5 HW Setu p LAN Wake-up on LAN This feature lets the comp uter's power be turned on from shutdown when it receives a wake-up p acket (Magic p acket) from the LAN. Power will be automatically turn ed on when a signal is received from an administrator's computer whic h is connected via a network.
User ’s Manual 8-1 T roubleshooting Chapter 8 T roubleshooting TOSHIBA have designed this computer for durability , however , should problems occur you are able to use the procedures detailed in this chapter to help determi ne the cause.
User ’s Manual 8-2 T roubleshooting ■ Make sure all optional accessories are configured properly in the computer's setup program and tha t all required driver software has been loaded (please refer to the documentation included with th e optional accessories fo r further information on its inst allation and configuration).
User ’s Manual 8-3 T roubleshooting Hardware and system checklist This section discusses problems ca used by your computer ’s hardware or attached peripherals.
User ’s Manual 8-4 T roubleshooting Self test While booting up the computer , self te st is executed aut omatical ly and the TOSHIBA logo is displayed on the screen.
User ’s Manual 8-5 T roubleshooting AC power If you have trouble turning on the comp u ter with the AC adaptor connected you should check the status of the DC IN/Ba ttery indicator . Please refer to Chapter 8, Power an d Power-Up Modes for further information.
User ’s Manual 8-6 T roubleshooting Check whether the battery is hot or cold to the touch - if so, it will not charge properly and should be allowed to reach room temperature before you try again.
User ’s Manual 8-7 T roubleshooting Real Time Clock Keyboard Keyboard problems can be caused by the setup and conf iguratio n of the computer - please refer to Chapter 5, The Keyboard for further information.
User ’s Manual 8-8 T roubleshooting Hard disk drive Markings appear on the computer's display panel. These marks may have co me from contact with the keyboard and T ouch Pad whi le the display panel has been closed.
User ’s Manual 8-9 T roubleshooting DVD Supe r Multi drive For more inform ation, refer to Chapter 4, Operating Basics . Problem Procedure Y o u cannot access a CD/DVD in the drive Make sure the drive’ s disc tray is securely closed. Press gently unt il it clicks into place.
User ’s Manual 8-10 T roubleshooting Memory Cards: SD/SDHC/SDXC Card, Mult iMediaCard For further information, please refer to Chapter 3, Hardware, Utilities and Options . Pointing device If you are using a USB mouse, you should also refer to both the USB device section in this chapter , and the documentation supplied with your mouse.
User ’s Manual 8-1 1 T roubleshooting USB mouse The on-screen pointer moves too fast or too slow In this instance, you should initially try changing the speed setting withi n t he Mouse Control utility . 1. T o access this utility , click Star t Control Panel Hardware and Sound Mouse .
User ’s Manual 8-12 T roubleshooting USB device In addition to the information in this section, p lease also refer to the documentation supplied with yo ur USB device. Double-clicking does not wor k In this instance, you should initially try changing the double-click speed setting within th e Mouse Control utility .
User ’s Manual 8-13 T roubleshooting Additional mem ory modu le Please also refer to Chapter 3, Hardware, Utilities and Options , for further information on installing and removing memory modules. Sound system In addition to the information in this section, p lease also refer to the documentation supplied with your a udio device.
User ’s Manual 8-14 T roubleshooting External monitor Please also refer to Chapter 3, Hardware, Utilities and Options , and to the documentation supplied with your monitor for further information.
User ’s Manual 8-15 T roubleshooting Wireless LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 4, Operating Basics . Bluetooth For further information on Bluetooth wire less communication, please refer to Chapter 4, Operating Basics .
User ’s Manual 8-16 T roubleshooting ■ Consult the resell er or dealer from where you purchased your computer and/or software - they are yo ur best resource for curren t information and support.
User ’s Manual A-1 S pecifications Appendix A S pecifications This appendix summarizes the computer ’s technical specifications. Environmental Requirements Power Requirements Conditions Ambient te.
User ’s Manual B-1 Display Controller and Video mode Appendix B Display Controller and V ideo mode Display controller The display controller in terprets software commands into hardware commands that turn particular parts on the screen on or of f.
User ’s Manual C-1 Information for Wireless Devices Appendix C Information for Wireless Devices Wireless LAN Interoperab ility The Wireless LAN is compatible wit h other LAN systems Direct Sequence S pread S pectrum (DSSS) /Orthog onal Frequency Division Multiplexing (OFDM) radio technology , and is compliant to: ■ The IEEE 802.
User ’s Manual C-2 Information for Wireless Devices CAUTION about Wireless Devices Wireless Devices and your health Wireless products, like other radio devices, emit radio frequency electromagnetic energy .
User ’s Manual C-3 Information for Wireless Devices Europe Restrictions for Use of 2400. 0-2483.5MHz Frequencies in Europe Restrictions for Use of 5150-5350MHz Frequencies in Europe France: Outdoor use limited to 10mW e.i.r .p. within th e band 2454- 2483.
User ’s Manual C-4 Information for Wireless Devices Restrictions for Use of 5470-5725MHz Frequencies in Europe T o remain in conformance with Europe an spectrum usage laws for Wireless LAN operati on, the above 2. 4GHz and 5GHz chann el limitations apply for outdoor usage.
User ’s Manual C-5 Information for Wireless Devices Caution: Exposure to Rad io Frequency Radiation The radiated output power of the Wireless device is far below the FC C radio frequency exposure li mits. Nevertheless, the Wireless device shall be used in such a manner that the pote ntial for human contact during normal operation is minimized.
User ’s Manual C-6 Information for Wireless Devices 1. Important notice The frequency bandwi dth of this equ ipment may operate within the sa me range as industria l device s, scientific devices, me.
User ’s Manual C-7 Information for Wireless Devices 4. About the JEIT A 5GHz Wireless LAN supports W52/W53/W56 Channel. Device Authorization This device obtains the T echnical Regulation Conformity .
User ’s Manual C-8 Information for Wireless Devices As of Oct. 2010 Do not use this eq uipment in the coun tries/regions which are not listed in the table below . ■ Available channel of Peer-to-peer conne ction by ad-hoc mod e is Ch1- Ch1 1. ■ Connection with an access point by t he Infra structure mode is Ch1- Ch13.
User ’s Manual C-9 Information for Wireless Devices Approved Countries/Regio ns for the Realtek ® RTL8188CE W ireless LAN 802.1 1n PCI -E NIC b/g/n Wireles s LAN This equipment is approved to the r adio standard by the countries/regions in the following table.
User ’s Manual C-10 Information for Wireless Devices Approved Countries/Regio ns for the Broadcom ® 802.1 1n Network Adapter b/g/n(b/g) W ire less LAN an d Bluetooth This equipment is approved to the r adio standard by the countries/regions in the following table.
User ’s Manual C-1 1 Information for Wireless Devices Approved Countries/Regio ns for the Atheros AR9002 WB-1NG Wireless Netw ork Adapter b/g/n (b/ g) Wireless LAN and Bluetooth This equipment is approved to the r adio standard by the countries/regions in the following table.
User ’s Manual C-12 Information for Wireless Devices Portugal Puerto Rico Qatar Re public of Chad Republic of Djibouti Republic of The Gambia Reunion Roma nia Rwanda Saudi Arabia Senegal Serbia Sier.
User ’s Manual D-1 AC Power Cord and Connectors Appendix D AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used.
User ’s Manual D-2 AC Power Cord and Connectors For the United S tates and Canada, two pin plug configuration must be a 2- 15P (250V) or 1-15P (125V) and three pin plug configuration mu st be 6- 15P (250V) or 5-15P (125V) as designat ed in the U.S. National Electrical code handbook and the Canadian Electrical Co de Part II.
User ’s Manual E-1 Legal Footnotes Appendix E Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. Non-applicable Icons Certain computer chassis are design ed to accommodate all possible configurations for an entire product se ries.
User ’s Manual E-2 Legal Footnotes Under some conditions, your computer product may automatically shut- down. This is a normal protective feat ure designed to reduce the risk of lost data or damage to the product when used outside recommended conditions.
User ’s Manual E-3 Legal Footnotes After going through many charge and discharge cycles, the battery will lose its ability to perform at maximum capacity and will n eed to be replaced. This is a normal phenomenon fo r all batteries. T o purchase a new battery pack, see the accessories information that is shipped with your computer .
User ’s Manual E-4 Legal Footnotes Copy Protection Applicable copy protection standards included in certain media ma y prevent or limit recording or viewing of the media.
User ’s Manual F-1 If your computer is stolen Appendix F If your computer is stolen Should your comput er be stolen , however , we’ll help you try to find it.
User ’s Manual F-2 If your computer is stolen TOSHIBA Theft Registration Send to: TOSHIBA Europe GmbH T echnical Servi ce and Support Blumenstrasse 26 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Owner ’s details Country stolen: Machine type: (e.
User ’s Manual Glossa ry-1 Glossary Glossary The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference.
User ’s Manual Glossa ry-2 Glossary FDD: floppy diskette drive FIR: fast infrared GB: gigabyte HDD: hard disk drive HDMI: High-Definition Multimedia Interface IDE: integrated drive electronics IEEE:.
User ’s Manual Index-1 Index Index A AC adaptor, 3-2 additional, 3-21 connecting, 1-3 DC IN 19V jack, 2-3 ASCII characters, 5-5 B Battery charging, 6 -5 extending life, 6-7 monitoring capacity, 6-6 .
User ’s Manual Index-2 Index FN + spac e (Zoom), 5-4 Function keys, 5-2 G Graphics controller, 3-4 H Hard disk drive, 3-3 automatic power off, 3-6 Heat disper sal, 3-7, 4-24 Hibernation Mode, 3-7 Ho.
User ’s Manual Index-3 Index AC power, 8-5 Additional mem ory modul e, 8-13 Analyzing the proble m, 8-2 Battery, 8-5 Bluetooth, 8-15 Dual Pointing device, 8-10 DVD Super Multi drive, 8-9 External mo.
デバイスToshiba C660の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Toshiba C660をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba C660の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba C660の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba C660で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba C660を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba C660の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba C660に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba C660デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。