ToshibaメーカーIK-HR1Sの使用説明書/サービス説明書
ページ先へ移動 of 28
For Customer Use Enter below the Serial # which is located on the bottom of the cabinet. Retain this information for future ref- erence. Model # IK-HR1S Serial # CMOS COLOR CAMERA INSTRUCTION MANUAL FCC NOTICE This equipment has been tested and f ound to comply with the limits for a Class A digital de vice, pursu- ant to P ar t 15 of the FCC Rules.
2 SAFETY PRECAUTIONS Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data.
3 Disclaimer We disclaim an y responsibility and shall be held harmless for any damages or losses incurred b y the user in any of the f ollowing cases: 1. Fire, earthquake or any other act of God; acts by third parties; misuse b y the user , whether inten- tional or accidental; use under extreme operating conditions.
4 1 CAUTIONS ON USE AND INSTALLATION ............................................ 2 COMPONENTS ....................................................................................... 3 ITEMS CONTROLLED BY THE ON SCREEN DISPLAY ........................
5 8 BEFORE MAKING SERVICE CALL ........................................................ 9 SPECIFICATIONS .................................................................................. 10 EXTERNAL APPEARANCE DIAGRAM ................................
6 1 Camera ................................................................................................................... 1 2 Accessorie s a Instruction manual ......................................................................................
7 1 8 2 4 6 7 5 9 Optical area HD-SDI terminal DISP button REMOTE terminal 3 FORMAT switch Mounting holes M3 Mounting holes M2 PAGE button [ Rear ] [ Front ] [ Bottom ] MENU UP button MENU DOWN button DATA UP (AWB) button DATA DOWN button DC IN 12V terminal 13 11 12 10 3.
8 IK-HR1S DC IN 12V Lens (option) 75 ohms coaxial cable (option) HD-SDI input HD-SDI (BNC connector) HD- capable monitor (option) DC power supply (option) AC adapter (AC-Y415A) Less than 11 mm [0.
9 4. 3A Connector Pi n A ssignments DC IN 12V terminal 1 +12V 2 +12V 3G N D 4G N D REMOTE terminal 1 2 3 TXD RXD GND Rear panel view 4 3 Connection on Rear Panel 㪩㪜㪤㪦㪫㪜 * For connecting to the REMOTE terminal, use a shielded cable. Connect the cable correctly or damage may occur to the camera.
10 㽲 Refer to the item "4. CONNECTION", and connect the equipment correctly. 㽳 Turn on the connec ted equipment and the cam era. 㽴 Aim the lens at the object, adjust th e lens iris ad justment, focus adjust ment, etc. 㽵 Refer to the item “5.
11 Meaning Display A WB OK Automatic white balance adj ustment f inished correctly. A WB NG LEVEL LOW Automatic white balance adjustm ent cannot be perf ormed bec ause the video l evel is too low. Adjust the video level by increasing the illumination or opening the lens iris.
12 (1) MANUAL(Manual gain) Gain adjustm ent is per formed on t he GAIN m enu. The adj ustment rang e is fr om 0 to 18dB in 1 dB steps. (Refer to the item “ 7.3 (2) (2.1) Changing gain in MANUAL mode”.) (2) OFF Gain is fixed at 0 dB. 52 G a i n Note: White, red, green, or blue dots may occur when the gain is increased.
13 Available selections Item Preset value (Factory setting) MANUAL AUTO, MANUAL, SS MODE OFF *2 OFF *1 MANUAL, OFF MODE 1123/1125H 748/750H AWB AWB, ATW, MANUAL MODE AUTO level -100 0 100 0 AUTO peak .
14 Various setti ngs can be control led on the unit b y using the on scr een menu disp layed on the monitor . The contents once set are memorized in the scene files (A, B, C, D, E) selected, so if the power turns off, it is unnecessary to set the values again when us ing the unit ne xt tim e.
15 䊶 Select the m enu to change the setting by referring to the item “7.1 Using the Menus ”. 䊶 When the [MENU UP], [MENU DOW N] buttons ar e pressed, the “ 㸢 ” on the scr een moves up and d own. Move the “ 㸢 ” to the item whose setting you wish to change.
16 (b) Changing the automatic shutter detectio n (ratio between peak and average v alue) 㽲 Move the “ 㸢 ” to PEAK/AVE by pressing [MENU UP], [MENU DOW N] buttons. 㽳 Select the ratio between peak and average value by pressing [DATA UP], [DATA DOW N] buttons.
17 䋨 䋨 䋨 䋨 1 䋮 䋮 䋮 䋮 2 䋩 䋩 䋩 䋩 Changing the setting in MANUAL mode Shutter mode AUTO, M ANUAL, SS -- 1 SHUTTER -- <FILE A> Shutter speed setting MODE MANUAL OFF, 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s, Shutter speed (OFF setting) 59.
18 2 GAIN (Video gain) GAIN has two modes ; MANUAL, OFF. Move the “ ” to MODE, press the [DATA UP], [DATA DOWN], and select one of the two modes : MANUAL, OFF.
19 (c) Changing color temperature setting 㽲 Move the “ 㸢 ” to C.TEMP by pressing [MENU UP], [MENU DOW N] buttons. 㽳 Select either 3200K or 5600K by pressing [DATA UP], [DATA DOW N] buttons. (a) Changing R PA INT 㽲 Move the “ 㸢 ” to R PAINT by pressing [MENU UP], [MENU DOW N] buttons.
20 䋨 䋨 䋨 䋨 3 䋮 䋮 䋮 䋮 2 䋩 䋩 䋩 䋩 Changing the setting in ATW(Automa tic Tracking White balance) mode White balance mode AWB, ATW, MANUAL -- 3 WHT BAL -- <FILE A> R PAINT (R.
21 䋨 䋨 䋨 䋨 3 䋮 䋮 䋮 䋮 3 䋩 䋩 䋩 䋩 Changing gain in MANUA L mode White balance mode AWB, ATW, MANUAL Red gain adjustment -100 to 100 -- 3 WHT BAL -- <FILE A> Blue gain adjust.
22 䋨 䋨 䋨 䋨 4 䋩 䋩 䋩 䋩 PROCESS Gamma correcti on ON, OFF Gamma correction level setting -10 to 10 -- 4 PROCESS -- <FILE A> GAMMA ON/OFF GAMMA Detail gain setting -7 to 7 DTL GAIN Detail boost frequency HIGH, NORMAL, LOW M PED Master pedestal setting -128 to 127 DTL B.
23 䋨 䋨 䋨 䋨 4 䋮 䋮 䋮 䋮 3 䋩 䋩 䋩 䋩 Changing detail (outline) gain 㽲 Move the “ 㸢 ” to DTL GAIN by pressing [MENU UP], [MENU DOW N] buttons. 㽳 Select the desired value of the detail gain by pressing [DATA UP], [DATA DOW N] buttons.
24 䋨 䋨 䋨 䋨 5 䋩 䋩 䋩 䋩 MATR IX(Matrix color correction) Matrix color correction ON, OFF R e d h u e s e t t i n g -- 5 MATRIX -- <FILE A> Yellow hue setting R e d g a i n s e t t i.
25 䋨 䋨 䋨 䋨 6 䋩 䋩 䋩 䋩 OPTION -- 6 OPTION -- <FILE A> RS-232C baud rate 9600bps, 19200bps BAUD RATE 9600bps 䋨 䋨 䋨 䋨 6 䋮 䋮 䋮 䋮 1 䋩 䋩 䋩 䋩 Changing RS-232C baud rate 㽲 Move the “ 㸢 ” to BAUD RATE by pressing [MENU UP], [MENU DOW N] buttons.
26 Items to be checked Symptom No picture 䍃 Is power supplied correctly? 䍃 Is the lens iris adjusted correc tly? 䍃 Are the camera and video cab les connected correctly? 䍃 Is the shutter m ode .
27 Unit : mm [inch] 10. EXTERNA L APPEA RANCE DIA GRAM 4-M2 Depth 3 [0.118] 4-M3 Depth 3 [0.118] 44 [1.73] 44 [1.73] 26 [1.02] 25 [0.98] 5 [0.2] 56 [2.2] 25 [0.98] 25 [0.98] 26 [1.02] 22 [0.87] 5 [0.2] 26 [1.02] 13.4 [0.53] 78 [3.07] 2-M3 Depth 3 [0.118] [Front] [Rear] Camera T ripod mount Threaded hole 25 [0.
Limited Warranty – TOSHIB A CMOS Color Camera The Imaging Systems Division of T oshiba America Information Systems, Inc. ("ISD") makes the follo wing limited warranties with regard to this CMOS color Camera ("Product"). These limited w arranties e xtend to the Original End-User ("Y ou[r]").
デバイスToshiba IK-HR1Sの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toshiba IK-HR1Sをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba IK-HR1Sの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba IK-HR1Sの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba IK-HR1Sで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba IK-HR1Sを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba IK-HR1Sの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba IK-HR1Sに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba IK-HR1Sデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
