ToshibaメーカーPROT130Dの使用説明書/サービス説明書
ページ先へ移動 of 274
Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) 1 Toshiba Personal Computer Satellite T130D/Satellite ProT130D/PORTEGE T130D Maintenance Manual TOSHIBA CORPORATION File N.
Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Copyright © 2009 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba.
Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite T130D, Satellite Pro T130D, and PORTEGE T130D Series.
Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite T130D, Satellite Pro T130D, and PORTEGE T130D system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems.
Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Conventions This manual uses the following formats to describe, identify, and highlight term s and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition.
Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Table of Contents Chapter 1 Hardware Overview 1.1 Features ..................................................................................................................
Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Chapter 2 Troubleshooting Procedures 2.1 Troubleshooting ........................................................................................................... .1 2.2 Troubleshooting Flowchart .
Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) 2.8 Display Troubleshooting..............................................................................................23 Procedure 1 External Monitor Check...............
Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) 2.17 Microphone Troubleshooting ..................................................................................... 39 Procedure 1 Sound Recorder Execution Check .........
Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Chapter 3 Diagnostic Programs 3.1 Tests and Diagnostics Software Overview ....................................................................2 3.2 Executing the Diagnostic Test .
Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Chapter 4 Replacement Procedures 4.1 Overview ................................................................................................................... .... 1 Safety Precautions .
Satellite T130D/Satellite ProT130D/PORTE GE T130DMaintenance Manual (960-Q08) Appendices Appendix A Handling the LCD Module ................................................................................1 Appendix B Board Layout .....................
Chapter 1 Hardware Overview Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08) Chapter 1 Hardware Overview.
Chapter 1 Hardware Overview Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08) 1 Hardware Overview Chapter 1 Contents 1.1 Features ......................................................................................
Chapter 1 Hardware Overview Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08) Figures Figure 1-1-1 Left of the computer .......................................................................................... 4 Figure 1-1-2 Right of the computer .
Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) Features 1.1 Features The Satellite T130D, Satellite T130D, PORTEGE T130D ( AMD Platform) features are listed below. Microprocessor Microprocessor that is used will be d ifferent by the model.
Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) Keyboard Keyboard module has 85 or 86 keys. It s upports Windows key and Application key. Battery The RTC battery is equipped inside the computer.
Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) Bridge Media Slot SD/SDHC/MS/MS pro/xD/MMC are supported. Bluetooth Some computers in this series of fer Bluetooth wireless communication functiona lity.
Chapter 1 Hardware Overview 11 10 9 5 6 14 12 7 8 13 1 3 4 2 1. External Monitor port 12.Power Button 2. HDMI out port 13. Security Lock 3. USB port (USB Sleep and Charge function is supp orted by this port only.) 4. FAN HOLE 14.Hall-s ensor 5. Keyboard 6.
Chapter 1 Hardware Overview 7 8 1 2 3 6 4 5 1. LAN jack 8. DC-IN jack 2. USB port 3. USB port 4. Microphone jack 5. Headphone Jack 6. Bridge Media Slot 7.
Chapter 1 Hardware Overview 1.2 System Block Diagram Figure 1-2-1 shows the system block diagram. Figure 1-1-1 System block diagram for AMD Platform Satellite T130D,Satellite ProT130D,PORTEGE T130D Ma.
Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) The PC contains the following components. CPU -1.6GHz (18W), Turion X2 Neo Dual-Core Processor L625 -1.5GHz (18W), Athlon X2 Neo Dual-Core Processor L325 -1.
Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) AMD RAID Support AHCI Support IDE Controller RTC (Real Time Clock) Power Management Integrated Micro-Controller (IMC)* High Definition Audio Controller 21mm x 21mm,0.
Chapter 1 Hardware Overview 1.3 2.5-inch Hard Disk Drive A compact, high-capacity HDD with a height of 9.5mm. Contains a 2.5-inch magnetic disk and magnetic heads. Figure 1-3-1 shows a view of the 2.5-inch HDD and Tables 1-3-2 and 1-3-3 list the specifications.
Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) Weight (g) 95 (max.) 95 (max.) 102 (max.) 102 (max.) Standard value Parameter WD WD2500BEVT- 26ZCT0 WD WD3200BEVT-26Z CT 0 Width (mm) 100 Height (mm) 12.
Chapter 1 Hardware Overview Specification Parameter WD WD2500BEVT-26Z CT 0 WD WD3200BEVT-26Z CT 0 Storage size (format ted) 250GB 320GB Speed (RPM) 5,400 Data transfer Rate - To/From Media - T0/From Hos t 117MB/s Ma x. 3Gbps bus transfer rate (MB/s) 3Gbps Average random seek time (read) (m s) 12.
Chapter 1 Hardware Overview 1.4 Keyboard The Flatiron 10 A keyboard has two different kinds of placement, one is for US style and the other is for UK style.
Chapter 1 Hardware Overview 1.5 TFT Color Display The Satellite T130D, Satellite T130D, PORT EGE T130D use LED to control backlight. 1.5.1 LCD Function Block Figure 1-5-1 shows a view of the LCD F unction Block and Table 1-5-2 lists the specifications.
Chapter 1 Hardware Overview 1.5.2 LCD Module Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08).
Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) 1.6 Power Rails Table 1-6-1 lists the power rail outpu t specifications of Congo platform .
Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) 1.7 Batteries The PC has the following two batteries. Main battery Real time clock (RTC) battery Table 1-7-1 lists the specification s f or these two batteries.
Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) Power ON Power OFF 6 cell 5 ~ 10 hours about 5 hours 12 cell 5 ~ 10 hours about 4 hours Table 1-7-2 Time required fo r charges of main battery Charge is stopped in the following cases.
Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) 1.7.3 RTC Battery The RTC battery provides the power supply to maintain the date, time, and other system information in memory. Table 1-7-4 lists the Time required for charge s of RTC battery and data retaining tim e.
Chapter 1 Hardware Overview Satellite T130D,Satellite ProT130D,PORTEGE T130D Maintenance Manual ( 960-Q08) 1.8 AC Adapter The AC adapter is used to charge the battery.
Chapter 2 Troubleshooting Procedures Satellite T130D, Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Chapter 2 Troubleshooting Procedures.
Chapter 2 Troubleshooting Procedures Satellite T130D, Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Chapter 2 Contents Chapter 2 Contents 2.1 Troubleshooting .......................................................................
Chapter 2 Troubleshooting Procedures Satellite T130D, Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 2.8 Display Troubleshooting ............................................................................................. 23 Procedure 1 External Monitor Check .
Chapter 2 Troubleshooting Procedures Satellite T130D, Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 2.17 Microphone Troubleshooting...................................................................................... 39 Procedure 1 Sound Recorder Execution Check .
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) 2 2.1 Troubleshooting Chapter 2 describes how to determine which Field Replaceable Unit (FRU) in the computer is causing the computer to malfunction.
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) 2.2 Troubleshooting Flowchart Use the flowchart in Figure 2-2-1 as a guide for determining which troubleshooting procedures to execute.
Chapter 2 Troubleshooting Procedures Figure 2-2-1 Troubleshooting flowchart (1/2) Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) .
Chapter 2 Troubleshooting Procedures Figure 2-2-1 Troubleshooting flowchart (2/2) If the diagnostics program cannot detect an e rror, the problem may be intermittent.
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) 4. If an error is found on th e touch pad test, perform the Touch pad Troubleshooting Procedures in Section 2.
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) 2.3 Power Supply Troubleshooting The power supply controller cont rols many functions and compone nts.
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) DC IN icon Power supply status Lights blue DC power is being supplie d from the AC adapter. Blinks orange Power supply malfunctio n *1 Doesn’t light Any condition other than those above.
Chapter 2 Troubleshooting Procedures Procedure 2 Connection Check The wiring diagram related to th e power supply is shown below: CN19 Congo MB SYSTEM BOARD HDD Any of the connectors may be disconnected. Perform Check 1. Check 1 Make sure the AC adapter and the AC power cord is firmly plugged into the DC IN connector PCN1 (Congo) and wall outlet.
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) Check 3 The battery pack may be completely discharged. Wait a few m inutes to charge the battery pack while connecting the battery p ack and the AC adapte r.
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) Procedure 4 Replacement Check The power is supplied to the system board by the AC adapter. If either the AC adapter or the system board was damaged, perform the following Checks.
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) 2.4 System Board Troubleshooting This section describes how to determ ine if th e system board is malfunctioning or not.
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) Procedure 1 Message Check When the power is turned on, the system perfor ms the Power on Self Test (POST) installed in the BIOS ROM.
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) Procedure 2 Diagnostic Test Program Execution Check Execute the following tests from the Diagnostic Test Menu.
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) 2.5 SATA Hard Disk Drive Troubleshooting To check if 2.5” HDD is malfunctioning or not, follow the troubleshooting procedures below as instructed.
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) Procedure 2 Message Check When the power is turned on, the system perfor ms the Initial Reliability T est (IRT) installed in the BIOS ROM.
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) Procedure 3 Format Check The computer’s HDD is formatted using the Free-DOS FORMAT program or the physical format program of the test program.
Chapter 2 Troubleshooting Procedures Procedure 4 Diagnostic Test Program Execution Check The HDD test program is stored in the Diagnosti cs Disk. Perform all of the HDD tests in the Hard Disk Drive Test. Refer to Chapter 3, Tests and Diagnostics, for more information about the HDD test program.
Chapter 2 Troubleshooting Procedures Procedure 5 Connector Check and Replacement Check HDD(s) is/are connected to the connector(s) on the system board.
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) 2.6 Keyboard Troubleshooting To check if the computer’s keyboard is malfunctioning or not, follow the troubleshooting procedures below as instructed.
Chapter 2 Troubleshooting Procedures Procedure 2 Connector and Replacement Check The connection of cable and board may be de fective. Otherwise, they may be faulty.
Chapter 2 Troubleshooting Procedures Satellite T130D,Satellite Pr o T130D and PORTEGE T1 30D Maintenance Manual (960-Q0 8) 2.7 Touch pad Troubleshooting To check if the computer’s touch pad is malfunctioning or not, follow the troubleshooting procedures below as instructed.
Chapter 2 Troubleshooting Procedures Procedure 2 Connector and Replacement Check The connection of cable and board may be de fective. Otherwise, they may be faulty.
Chapter 2 Troubleshooting Procedures Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08) 2.8 Display Troubleshooting To check if the computer’s display is ma lfunctioning or not, follow the troubleshooting procedures below as instructed.
Chapter 2 Troubleshooting Procedures Procedure 3 Connector and Cable Check LCD Module is connected to system board by an LCD. Their cables may be disconnected from system board. Disassemble the com puter following the steps described in Chapter 4, Replacement Procedures .
Chapter 2 Troubleshooting Procedures Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08) Procedure 4 Replacement Check LCD module, LCD cable are connected to displa y circuits.
Chapter 2 Troubleshooting Procedures 2.9 LAN Troubleshooting To check if the computer’s LAN is malfunc tioning or not, follow the troubleshooting procedures below as instructed.
Chapter 2 Troubleshooting Procedures Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08) 2.10 Wireless LAN Troubleshooting To check if the computer's W ireless LAN is malfunctioning or not, follow the troubleshooting procedures below as instructed.
Chapter 2 Troubleshooting Procedures Procedure 2 Antennas' Connection Check The wireless LAN function-wiri ng diagram is shown below: CN23 SYSTEM B O ARD Congo MB W LA N C ARD WLAN ATTENNA (BLACK) AUX MAIN (WHITE) WLAN ATTENNA MINI-PCI Any of the connections may be defective.
Chapter 2 Troubleshooting Procedures Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08) Procedure 3 Replacement Check Wireless LAN card, wireless LAN antenna or system board may be faulty.
Chapter 2 Troubleshooting Procedures 2.11 Sound Troubleshooting To check if the sound function is malfunctioning or not, follow the troubleshooting procedures below as instructed. Procedure 1: Connector Check Procedure 2: Replacement Check Procedure 1 Connector Check The connection of sound system is shown in the following figure.
Chapter 2 Troubleshooting Procedures Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08) Procedure 2 Replacement Check If External microphone/Headphone does not work properly, perform check 1. If internal microphone /Speaker do no t work properly, perform check 2.
Chapter 2 Troubleshooting Procedures 2.12 Bluetooth Troubleshooting To check if the computer’s B lue tooth is malfunctioning or not, follow the troubleshooting procedure below as instructed. Procedure 1: Connector Check and Replacement Check Procedure 1 Connector Check and Replacement Check The B lue tooth module is connected to system board.
Chapter 2 Troubleshooting Procedures Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08).
Chapter 2 Troubleshooting Procedures 2.13 HDMI Troubleshooting To check if the computer’s HDMI is malf unctioning or not, follow the troubleshooting procedures below as instructed.
Chapter 2 Troubleshooting Procedures Procedure 3 Connector and Cable Check HDMI monitor connected to HDMI&USB board by an HDMI cable. If the connection is loose, reconnect firmly and restart the co mputer. If the problem still occurs, go to Procedure 4.
Chapter 2 Troubleshooting Procedures Satellite T130D and Pro T130D and PORTEGE T130DMain tenance Manual (960-Q08) Procedure 4 Replacement Check HDMI signals are connected to display circ uits via HDMI cable and HDMI&USB board. Any of these components may be faulty.
Chapter 2 Troubleshooting Procedures 2.14 Memory Troubleshooting Memory troubleshooting can following be low procedures as instructed. Procedure 1: Diagnostic Te st Program Execution Check Procedure 2: Connect Check and Replacement Check Procedure 1 Diagnostic Test Program Execution Check Execute Memory test in the Memory test p rogra m.
Chapter 2 Troubleshooting Procedures 2.15 3G Troubleshooting To check if the computer’s 3G is malfuncti oning or not, follow the troubleshooting procedure below as instructed. Procedure 1 Connector Check and Replacement Check The 3G module is connected to system board.
Chapter 2 Troubleshooting Procedures 2.16 Camera Troubleshooting To check if the computer’s Camera is m a lfunctioning or not, follow the troubleshooting procedure below as instructed.
Chapter 2 Troubleshooting Procedures 2.17 Microphone Troubleshooting Microphone troubleshooting can following below procedures as instructed. Procedure 1: Sound Recorder Execution Check Procedure 2: C.
Chapter 2 Troubleshooting Procedures 2.18 CRT Troubleshooting To check if the computer’s CRT is malfunctioning or not, follow the troubleshooting procedures below as instructed.
Chapter 2 Troubleshooting Procedures 2.19 USB Board Troubleshooting Flatiron carries 3 USB port. To check if the computer’s USB port is malfunctioning or not, follow the troubleshooting procedures below as instructed.
Chapter 2 Troubleshooting Procedures 2.20 LED Troubleshooting These are 7 LED lights at Top assy. From left to right, the Open statuses of them represent functions as below.
Chapter 3 T est Program for Field _____________________________________________________________________ Satellite T130D, Satellite Pro T130D and PORTEG E T130D Main tenance Manual (960-Q0 8) Chapter 3.
Chapter 3 T est Program for Field _____________________________________________________________________ Satellite T130D, Satellite Pro T130D and PORTEG E T130D Main tenance Manual (960-Q0 8) Chapter 3 Contents 3.1 Tests and Diagnostics Software Overview .
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Chapter 3 Diagnostic Programs.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.1 Tests and Diagnostics Software Overview This chapter explains how to use the Tests and Diagnostics Software for the Satellite T130D, Satellite Pro T130D and PORTEGE T130D computer systems.
Chapter 3 Test Program for Field. 3.2 Executing the Diagnostic Test Free-DOS is required to run the Diagnostics Program. To start the programs follow these steps: 1. Create a Free-DOS bootable disk and copy all the files from the Tests and Diagnostics software to the disk.
Chapter 3 Test Program for Field. The following menu displays: :Select item Enter:Decision item Esc:Escape TOSHIBA Satellite(Pro) P500 Diagnostics Version V1.00 [DIAGNOSTICS MENU] 01. DIAGNOSTIC TEST 02. RUNNING TEST 03. DMI INFORMATION 04. LOG UTILITIES 05.
Chapter 3 Test Program for Field. 4. Select the subtest you want to execute and press Enter . The following menu displays: Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 5. Select the desired test from the subtest menu and press Enter .
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) NOTES : The Item2 and 3 of Test Parameter are not used by some tests. Go To Test Move the highlight bar to Go to Test and press Enter to start executing the test.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.3 Subtest names Table 3-3-1 lists the subtest names for each test program in the Diagnostic Test m enu.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) No. Test Name No. Subtest Name 05 FLOPPY DISK TEST 01 02 03 04 05 Sequential Read S.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) No. Test Name No. Subtest Name 10 MULTIMEDIA TEST 01 02 03 04 Sequential Read Test .
Chapter 3 Test Program for Field. 3.4 System Test To execute the System Test select 01 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The System Test contains three subtests. Move the highlight bar to the subtest you want to execute and press Enter .
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Subtest 03 CPU Temperature This will display CPU Temperature for check, press [ESC] to exit .
Chapter 3 Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program The portion which PC and Test-Fixture contact is green. Set method of PC 3 Test1 Judgment If all data is less than ranges, it will be OK.
Chapter 3 Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC 4 Test2 Judgment If all data is less than ranges, it will be OK.
Chapter 3 Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 5 Test3 Judgment If all data is less than ranges, it will be OK.
Chapter 3 Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 6 Test4 Judgment If all data is less than ranges, it will be OK.
Chapter 3 Test Program for Field. The display of a test program and the set method of PC are shown below. Display of a Test Program Set method of PC 7 Test5 Judgment If all data is less than ranges, it will be OK. 8 Inspection Judgment If all data is less than ranges, it will be OK.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.5 Memory Test To execute the Memory Test select 02 from the Diagnostic Test Menu, press Enter and follow the directions on the screen.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 5. Address pattern test “16 bit write and 16 bit read” of address pattern data is executed and the new data is compared with the original data.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) with the original data patterns. Addresses are displayed in 64KB increments during the test. Test Process: 1. Byte Enable Test One bit write/ 8 bit read” is executed and the new data is compared with the original data.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Test Process: 1. Checks the memory size to determ ine the maximum size of installed memor y. 2. Tests memory addresses 0 to the m aximum installed.
Chapter 3 Test Program for Field. 3.6 Keyboard Test To execute the Keyboard Test select 03 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Keyboard Test contains five subtests that test the computer’s keyboard and mouse actions.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Subtest 04 Hot Key Display [9 Key] This subtest is used for the 9 hot key and functions the same as Subtest 1.
Chapter 3 Test Program for Field. LEFT PRESS RIGHT PRESS TOUCH_PAD TEST Please Do Not Press the Left and Right Button at the Same Time Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance.
Chapter 3 Test Program for Field. 3.7 Display Test To execute the Display Test select 04 from the Diagnostic Test Menu, press Enter and follow the directions displayed on the screen. The Display Test contains twelve subtests that test the display in various modes.
Chapter 3 Test Program for Field. Press Enter if NO was selected for Test Loop on the Test Parameter Menu. Press Ctrl + break if YES were selected for Test Loop on the Test Parameter Menu. Subtest 02 Character Set This subtest displays the character codes 00H - FFH, using Mode 01H (40*25).
Chapter 3 Test Program for Field. Subtest 03 80 * 25 Character Display This subtest uses 80*25 video resolution to display character codes 20H - 7EH using Mode 03H (80*25). The data displayed is shifted 1 byte to the left for each line as shown below.
Chapter 3 Test Program for Field. Subtest 04 320 * 200 Character Display This subtest uses 320*200 video resolution to display green, red and yellow followed by cyan, magenta, and white. The screen below shows the displays when this subtest is executed.
Chapter 3 Test Program for Field. 320*200 GRAPHICS DISPLAY : [D] BLACK D GRAY BLUE L BLUE GREEN L GREEN CYAN L CYAN RED L RED MAGENTA L MAGENTA BROWN YELLOW WHITE I WHITE Press [Enter] KEY Press ENTER.
Chapter 3 Test Program for Field. Subtest 05 640 * 200 Character Display This subtest uses 640*200 video resolutions to display three windows; each window drives a different set of dots: even dots, odd dots and all dots. The screen below displays when this subtest is executed.
Chapter 3 Test Program for Field. Subtest 06 640 * 480 Character Display This subtest uses 640*350 video resolutions to display 16 colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified white.
Chapter 3 Test Program for Field. 640*480 GRAPHICS DISPLAY : [12] BLACK DARK GRAY BLUE LIGHT BLUE GREEN LIGHT GREEN CYAN LIGHT CYAN RED LIGHT RED MAGENTA LIGHT MAGENTA BROWN YELLOW WHITE INTENSIFIED W.
Chapter 3 Test Program for Field. Subtest 07 Display Page This subtest displays video pages zero through seven. DISPLAY PAGE 0 000000000000000000000000000000000000000000000000000000000000000 0...........................................................
Chapter 3 Test Program for Field. Subtest 08 "H" Pattern Display This subtest displays a full screen of "H" patterns. HHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHHH.
Chapter 3 Test Program for Field. Subtest 10 Color Graphics Display This subtest displays three colors, cyan, white and yellow on the screen as shown below. 640 * 480 GRAPHICS DISPLAY CYAN WHITE YELLOW To exit this subtest and return to the Display Test menu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu.
Chapter 3 Test Program for Field. Subtest 11 Color Attributes Display This subtest displays 16 colors: black, blue, green, cyan, red, magenta, brown, white, dark gray, light blue, light green, light cyan, light red, light magenta, yellow, and intensified white.
Chapter 3 Test Program for Field. NOTE: The following screen does not display correctly. It will be amended in the next version. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Press [Enter] Key Press Enter to execute the VRAM mapping test which displays a vertical line at four dot intervals using Mode 12.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Press [Enter] Key To exit this subtest and return to the Display Test menu: Press Enter if NO was selected for Test Loop on the Test Parameter Menu.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Subtest 12 Color Tiling This subtest displays black, gray, white, and 3 gradations of red, green, and blue as shown in the following display.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.8 Hard Disk Test To execute the Hard Disk Test select 06 from the Diagnostic Test Menu, press Enter and follow the directions on the screen.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Subtest 04 Cross Talk and Peak Shift This subtest writes eight of the most likely to fail data patterns (shown below) to a cylinder on the HDD, and then reads the data while moving from cylinder to cylinder.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Subtest 07 Sequential Write This subtest writes specified data to all cylinders on the HDD. The following message displays on the screen to enter the test data.
Chapter 3 Test Program for Field. 3.9 Real Time Clock Test To execute the Real Time Clock Test select 07 from the Diagnostic Test Menu, press Enter and follow the directions on the screen. The Real Time Clock Test contains three subtests that test the computer’s real time functions.
Chapter 3 Test Program for Field. Subtest 02 Backup Memory This subtest writes 50 bytes of test data (FFH, AAH, 55H, and 00H) to the CMOS 14 th address, then reads the new data and compares it to the original data. Subtest 03 Real Time Carry CAUTION : When this subtest is executed, the current date and time are reset.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.10 Cache Memory Test To execute the Cache Memory Test select 08 from the Diagnostic Test Menu, press Enter and follow the directions on the screen.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Subtest 04 Bit Shift Pattern Test This subtest reads the contents of cache memory and saves it into RAM.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.11 High Resolution Display Test To execute the High Resolution Display Test select 09 from the Diagnostic Test Menu, press Enter and follow the directions on the screen.
Chapter 3 Test Program for Field. Subtest 02 640*480 Mode Display This subtest uses 640*480 video resolutions to display a high resolution white frame, 256 letter types (8*16 pixels) and 64 gradations of white, red, green, and blue as shown below.
Chapter 3 Test Program for Field. Subtest 03 800 * 600 Mode Display This subtest uses 800*600 video resolutions to display a high resolution white frame, 256 letter types (8*16 pixels) and 256 gradations of white, red, green, and blue as shown below.
Chapter 3 Test Program for Field. Subtest 04 1024* 768 Mode Display This subtest uses 1024*768 video resolutions to display a high resolution white frame, 256 letter types (8*16 pixels) and 64 gradations of white, red, green, and blue as shown below.
Chapter 3 Test Program for Field. Subtest 05 “H” Pattern Display This subtest uses the 1024*768 Mode to display a high resolution white frame, “H” letters (8*16 pixels fonts), at 128 letters by 48 lines.
Chapter 3 Test Program for Field. Subtest 06 Focus Test (“E” Pattern) This subtest sets the 1024*768 Mode and displays “E” patterns (18*18 dot fonts), at 56 letters *42 lines surrounded by a high resolution white frame.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.12 Multimedia Test To execute the Multimedia Test select 10 from the Diagnostic Test Menu, press Enter and follow the directions on the screen.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.13 MEMORY2 Test To execute the Expansion Test select 11 from the Diagnostic Test Menu, press Enter and Follow the directions on the screen.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Tee test method is the same as Subtest2.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.14 Error Codes and Error Status Names The following table lists the error codes and error status names for the Diagnostic Tests.
Chapter 3 Test Program for Field. Table 3-15-1 Error codes and error status names (2/2) Device Name Error Code Error Status Name HDD BB Undefined Error CC Write Fault E0 Status Error F0 No Sense Error.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.15 Running Test NOTES : 1. You may add or delete subtests using the Running Test Edit Item function, see Section 3.20. 2. Do not forget to insert a work disk in the FDD.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 3.16 DMI INFOEMATION Select 03 from the Diagnostics Menu and press Enter to Check or W rite DMI Information Data: 3.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) c. AC Adapter Select [1]65W [2]75W [3]95W [4]120W Select 1 ~ c to key in new data ,.
Chapter 3 Test Program for Field. 3.17 Log Utilities This function logs error information generated while a test is in progress and stores the results in RAM (Maximum error log: 500 tim es). This function can store data on a floppy disk. If the power switch is turned off, the erro r inform ation will be lost.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 2. Error information displayed on the screen can be manipulated with the following number keys: The 1 key scrolls the display to the next page.
Chapter 3 Test Program for Field. 3.18 System Configuration Select 05 from the Diagnostics Menu and press Enter to display the following system configuration: SYSTEM CONFIGURATION: * - BIOS VER = VX.XX KBC VER = XXXX * - MAC ADDRESS: XXXXXXXXXXXX * - 0 ASYNC ADAPTER * - 1 HDD DRIVE(S):XXXXXXXXXXXXXXXXXXXXXXXXXX FW Rev.
Chapter 3 Test Program for Field. 3.19 Running Test Edit Item 3.19.1 Function Description Function description lets you add or delete the subtests used to execute the Running Test. The following screen displays after pressing the Tab key to edit an item in the Running Test.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) 1. Enter a number or 0 for Loop Count and press Enter . Select a number from 1 to 65535 to define the num ber of times the Running Test executes.
Chapter 3 Test Program for Field. 3.20 Common Tests and Operation 3.20.1 How to operate a window To input parameters, or open a window use the following keys. key : to move a highlight bar [Enter] key : to select an item at the highlight bar [Esc] key : to close the current window and go back to the previous window 3.
Chapter 3 Test Program for Field. Satellite T130D,Satellite Pro T130D and PORTEGE T130D Maintenance Manual (960-Q08) Pass Count Displays the number of times the test has been executed. Error Count Displays the number of errors which have occurred during the test.
Chapter 3 Test Program for Field. 3.20.4 Test Stop Display If an error occurs during a Subtest and YES is selected for Error Stop, the following message displays: [HALT OPERATION] 1. Test end 2. Continue 3. Retry * Select 1, 2, or 3 The three selections have the following functions: 1: Terminates the test program and exits to the subtest menu.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) Chapter 4 Replacement Procedures.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) Chapter 4 Contents 4.1 Overview ..................................................................................................
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) Figures Figure 4-2-1 Remove the battery pack................................................................................. 9 Figure 4-2-2 Install the battery pack .
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) Figure 4-10-3 Remove the touchpad and touchpad board…………………………………41 Figure 4-11-1 Remove the I/O Board .
Chapter 4 Replacement Procedures 4 2 4.1 Overview This chapter describes the procedure for rem oving and replacing the field replaceable units (FRUs) in the PC. It may not be necessary to remove all the F RUs in order to replace one. The chart below provides a guide as to whic h other FRUs must be removed before a particular FRU can be removed.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) Safety Precautions Please read the following safety instructions before disassembling the computer and always follow the instructions w hile working on the computer.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) Before You Begin Take note of the following points before star ting work. Always remove the AC adapter and battery pack before commencing any of the procedures.
Chapter 4 Replacement Procedures Disassembly Procedure Three main types of cable connector are used. Pressure plate connector Spring connector Normal pin connector When disconnecting a pressure plate connector, lift up the tag on one side of the plastic pressure plate on the connector and pull the cab le out from the connect or.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) Assembly Procedure After the computer has been disassembled and th e part that caused the fault has been repaired or replaced, the computer must be reassem bled.
Chapter 4 Replacement Procedures Screw Tightening Torque Use the following torque when tightening screws. CAUTION : Overtightening may damage screws or parts. Undertightening may allow screws to loosen (and possibly fall ou t) causing a short circuit or other damage.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) Screw Notation To make maintenance of the co mputer easier, markings of the kinds of the screws including the types and lengths are i ndicated on the computer body.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) 4.2 Battery pack Removing the battery pack The following describes the procedure for rem o ving the battery pack (See Figure 4-2-1).
Chapter 4 Replacement Procedures LATCH 2 LATCH 1 Figure 4-2-1 Remove the battery pack NOTE : Dispose of the used battery pack in a ccordance with the laws and ordinances of your local authority. Installing the battery pack The following describes the procedure for inst alling the battery pack (See Figure 4-2-2).
Chapter 4 Replacement Procedures 3. Attach the battery cover to the battery pack . 4. Insert the battery pack 5. Ensure the battery releas e latch (2) is moved into its locked position LATCH 2 Figure .
Chapter 4 Replacement Procedures 4.3 HDD Removing a HDD-H9.5mm The following describes the procedure for re moving the HDD (See Figure 4-3-1 to 4-3-3). CAUTION: Take care not to press on the top or bottom of a HDD. Pressure may cause data loss or damage to the device.
Chapter 4 Replacement Procedures Figure 4-3-1 Turn the computer upside down CAUTION: When a HDD is installed, they are inst alled in the position as the following figure.
Chapter 4 Replacement Procedures 5. Remove the following screws securing the HDD holder and remove the HDD holder . M3.0 3.0B FLAT BIND screw x4 M3*3 4pcs Figure 4-3-3 Remove HDD Installing HDD-H9.5mm The following describes the procedure for installing the main HDD.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) 4.4 Memory Module CAUTION: The power of the computer must be turned off when you remove a memory module. Remove a memory module with the power on risks damaging the module or the computer itself.
Chapter 4 Replacement Procedures Figure 4-4-1 Remove memory slot cover Figure 4-4-2 Remove a memory module Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08).
Chapter 4 Replacement Procedures Installing a memory module To install a memory module, confirm that the com puter is in boot mode. Then perform the following procedure (See Figure 4-4-3). 1. Insert a memory module into the connector of the com puter slantwise (term inal side first) and press it to connect firmly.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) 4.5 Keyboard Removing the keyboard The following describes the procedure for rem ovi ng the keyboard (See Fi gure 4-5-1 to 4-5-2).
Chapter 4 Replacement Procedures Figure 4-5-1 Remove 2 screws for KB Holder Figure 4-5-2 Remove 2 screws for Keyboard Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08) Installing the keyboard The following describes the procedure for installing the keyboard. 1. Connect the keyboard flexible cable to the connector on the system board.
Chapter 4 Replacement Procedures 4.6 Wireless LAN card and BT Module Removing a Wireless LAN card The following describes the procedure for re m oving a Wireless LAN card (See Figure 4-6-1 to 4-6-2). 1. Remove the screw of wireless LAN card. M2x 2.
Chapter 4 Replacement Procedures Figure 4-6-2 Remove a wireless LAN card Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08).
Chapter 4 Replacement Procedures Installing a Wireless LAN card The following describes the procedure for installing a W ireless LAN card. 1. Insert a wireless LAN card terminals slantwise into the connector on the com puter and press a wireless LAN card and lock the secure screws.
Chapter 4 Replacement Procedures 4.7 3G module card Removing 3G module card The following describes the procedure for rem oving a 3G module card (See Figure 4-7-1 to 4-7-3). 1. Remove screw of 3G module board. M2x 3.0 BIND screw x2 2. Disconnect the 3G module antenna cable from the connectors on a 3G module card 3.
Chapter 4 Replacement Procedures Figure 4-7-2 Remove a 3G module card Satellite T130D, Satellite Pro T130D , and PORTEGE T130D Maintenance Manual (960-Q08).
Chapter 4 Replacement Procedures Installing a 3G module card The following describes the procedure for installing a 3G m odule card. (See Figure 4- 7-3) 1. Insert a 3G module card terminals slantwise into the connector on the system board and press a 3G module card and lock the secure screws.
Chapter 4 Replacement Procedures 4 4.8 Display Assembly Removing the display assembly The following describes the procedure for rem o ving the display assembly (See Figure 4-8-1 to 4-8-5). 1. Close the display and turn the computer upside down. 2. Remove the battery pack (See Figure 4-2-1) 3.
Chapter 4 Replacement Procedures Figure 4-8-2 Remove the screws (from bottom side) 5. Disassemble KB Holder and KB screw (See Figure 4-5-1) 6. Remove the screws from the top side and remove the cover.
Chapter 4 Replacement Procedures M2*5 7pcs Figure 4-8-3 Remove the screws (from top side) 7. Disconnect the FFC and cables. 8. Disassembly TOP ASSY 9. Pull out the wireless LAN antenna from the guide with two hands.
Chapter 4 Replacement Procedures Figure 4-8-4 Remove the Wireless Antenna and LCD cable 10. Pull out the LCD cables from the guide of system board. Figure 4-8-5 Remove the LCD cable from system board .
Chapter 4 Replacement Procedures 11. Pull out the LCD cables from the guide of LCD panel. Figure 4-8-6 Remove the LCD cable from LCD panel Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain .
Chapter 4 Replacement Procedures Opening the display to 135degree, keeping disp lay side by hand and remove the hinge screw. ‧ M2.5 3 FLAT BIND screw x4(Lock tight) ‧ M2.5 6.5 FLAT BIND screw x2(Lock tight) M2.5*3 4pcs M2.5*6.5 2pcs Figure 4-8-7 Remove the hinge screws 12.
Chapter 4 Replacement Procedures Installing the display assembly The following describes the procedure for installing the display assembly. 1. Inserting the pole of hin ge to the hole of hinge assembly, set the display assembly with hands on the base assembly.
Chapter 4 Replacement Procedures 3. Connect the LCD harness to the connector on the system board. Figure 4-8-9 Connecting LCD harness to the system board 4. Arrange the wireless antenna cables along th e guide (front) and secure them with guide . 5. Pass the cables to the back of computer through the slot .
Chapter 4 Replacement Procedures Figure 4-8-10 Arrange and connect Wireless LAN cable 7. Install the LAN board and Top c over Assembly of the system. NOTE : If Fingerprint or Dust left on LCD screen during disassembly and assembly LCD units, please follow Appendix A to clean it.
Chapter 4 Replacement Procedures 4.9 Top Cover Assembly Removing the Top cover assembly The following describes the procedure for rem o ving the Top cover assembly (See Figure 4-9- 1 to 4-9-3). 1. Turn over the computer. 2. Remove the following screws securing the Top cover assembly from the back and bottom of computer.
Chapter 4 Replacement Procedures 3. Remove the following screws securing the Top cover assembly from the front of computer. Pull up and remove the Top cover assembly from the Base assembly . M2.0 5.0 FLAT BIND screw Back x11 M2*5 7pcs Figure 4-9-2 Remove the screws (front) and Top cover assembly 4.
Chapter 4 Replacement Procedures Figure 4-9-3 Disconnect the touch pad flat cable/LAN cable Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-37.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-38 Installing the Top cover assembly The following describes the procedure fo r installing the Top cover assembly. 1. Install the Top cover assembly to th e Base assembly.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-39 4.10 Touch Pad Removing the touch pad The following describes the procedure for removing the touch pad (See Figure 4-10-1 to 4- 10-3).
Chapter 4 Replacement Procedures Figure 4-10-1 Remove the touch FFC cable Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-40.
Chapter 4 Replacement Procedures M2-0.4*2 2pcs M2.0*3.0 2p cs M2*2-I 5pcs Figure 4-10-2 Loose the screws Figure 4-10-3 Remove the touchpad and touchpad board Satellite T130D, Satellite Pro T130D, and .
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-42 Installing the touch pad The following describes the procedure for installing the touch pad. 1. Peel off the separator covering on the sensor portion of a new touch pad.
Chapter 4 Replacement Procedures 4.11 I/O Board The following describes for removing the I/O Board (See Figure 4-11-1). Removing the I/O Board 1. Pull out the I/O Board FFC, LAN FFC, Speaker cable from I/O board connector. 2. Loose the below screws and then incline pull out I/O Board.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130DMain tenance Manual (960 -Q08) 4-44 Installing the I/O Board The following describes fo r installing the I/O Board 1. Fix the below screws then incline insert in I/O Board M2.
Chapter 4 Replacement Procedures 4.12 System board CAUTION: 1. when handling the system board, always hold by the edges. Do not touch the printed circuit face. 2. if replacing with a new system board, execute the subtest01 Initial configuration in section 3.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 46 Installing the system board The following describes the procedur e for installing the system board. 1. Secure the system board with the following screws .
Chapter 4 Replacement Procedures Removing RTC battery The following describes the procedure for rem o ving the RTC battery unit (See Figure 4-12-2 to 4-12-3). 1. Pull the away the socket of RTC battery a nd use a clam p to hold RTC battery tightly. 2.
Chapter 4 Replacement Procedures Figure 4-12-3 Remove the RTC battery-step_2 Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 48.
Chapter 4 Replacement Procedures Installing RTC battery The following describes the procedure for installing the RTC battery unit (See Figure 4-12-4). 1.
Chapter 4 Replacement Procedures 4.13 CPU Heat Sink Removing the CPU heat sink The following describes the procedure for re m oving the CPU heat sink (See Figure 4-13-1). 1. Disconnect the Heat sink cable from the connector on the system board 2. Remove the following screws securing the heat sink holder along 1 to 3.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 51 Installing the CPU heat sink The following describes the procedure for installing the CPU heat sink 1. Secure the following screws securing the heat sink holder along 1 to 3.
Chapter 4 Replacement Procedures 4.14 LCD unit Removing the LCD unit The following describes the procedure for re m oving the LCD unit (See Figure 4-14-1 to 4- 14-3). 1. Remove Screw MYLAR cover x4 2. Remove the following screws securing the display mask M2.
Chapter 4 Replacement Procedures Figure 4-14-2 Remove the LCD unit Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 53.
Chapter 4 Replacement Procedures 7. Remove the following screws securing the LCD support (LCD unit side) and rem ove the hinge from the LCD unit. M2.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 55 Installing the LCD unit The following describes the procedure for installing the LCD unit. Install the LCD supports (LCD unit side) and hi nge to the LCD and secure them with the following screws .
Chapter 4 Replacement Procedures 4.15 Web Camera module Removing Web Camera module The following describes the procedure for removing the Web Camera m odule. (See Figure 4-15-1 to 4-15-2). 1. Pull off the connect or of Web Cam era module. 2. Peel off the glue of Web Camera m odule.
Chapter 4 Replacement Procedures Figure 4-15-2 Peel off the glue of Web Camera module Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 57.
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 58 Installing Web Camera module The following describes the procedure for installing the W eb Camera module. 1. Pull in the glue of Web Camera Module.
Chapter 4 Replacement Procedures 4.16 Application for Thermal grease on CPU and North Bridge (See Figure 4-16-1) I. The thermal grease on North Bridge and CPU Figure 4-16-1 Intel &AMD Thermal grea.
Chapter 4 Replacement Procedures II. Use grease on North Bridge and CPU 0.15cc for one repair. Figure 4-16-2 Apply silicon gr ease for North Bridge and CPU Satellite T130D, Satellite Pro T130D, and PO.
Chapter 4 Replacement Procedures 4.17 Speaker Box Removing Speaker Box The following describes the procedure for re moving Speaker Box. (See Figure 4-17-1 to 4- 17-3). 1. Remove the following screws securing Speaker Box. M2.0 2.5 screw x 4 2. Removing the Speaker Box.
Chapter 4 Replacement Procedures Figure 4-17-2 Removing the secu ring screws at right side Figure 4-17-3 Removing the Speaker Box. Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance .
Chapter 4 Replacement Procedures Satellite T130D, Satellite Pro T130D, and PORT EGE T130D Maintenance Manua l (96 0-Q08) 63 Installing Speaker Box The following describes the proced ure for installing Speaker Box. 1. Installing the Speaker Box. 2. Securing Speaker Box of following screws .
Satellite T130D,Satellite ProT13 0D and PORTEGE T130D Maintenance Manual (960-Q08) Appendices.
Satellite T130D and Sa tellite ProT130D Maintena nce Ma nual (960-Q 08) Appendix Contents Appendix A Handling the LCD Module ............................................................................. 1 Appendix B Board Layout ......................
Satellite T130D and Sa tellite ProT130D Maintena nce Ma nual (960-Q 08) C.17 CN19 Main SATA HDD Connector………………...………………….……8 C.18 CN20 DDR Connector……………………………………………………....9 C.19 CN21 DDR Connector .
Satellite T130D and Sa tellite ProT130D Maintena nce Ma nual (960-Q 08) Appendix F Wiring Diagrams ............................................................................................. 1 F.1 RGB Monitor ID Wrapar ound Connector ...............
Handling the LCD Module Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged duri ng assembly or disassembly.
Handling the LCD Module 3. If the panel’s surface gets fingerprint or dus t, put on gloves and wipe it with static electricity cloth. If it is still d irty, drop some cleaning alcoho l on the surface and wipe it again. If the surface is much more fingerprint or dust, w e recommend a CRT cleaning agent.
Handling the LCD Module 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the m odule, so guard against damage from electrostatic discharge.
Handling the LCD Module Satellite T130D, Satellite Pro T130D, and PORTEGE T130D Maintenance Ma nual (960-Q08 ).
Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage.
Handling the LCD Module 10. If you transport the module, do not use p acking material that contains epoxy resin (amine) or silicon glue (alcohol or oxide).
Board Layout Appendix B Appendix B Board Layout B.1 System Board CN14 CN1 CN2 CN3 U3 CN4 CN5 CN7 CN6 U9 U11 CN8 CN9 CN11 CN12 Figure B-1-1 System board layout (front) Satellite T130D, Satellite Pr o T.
Board Layout CN15 CN16 CN18 CN17 CN19 CN20 CN21 U16 U17 U18 CN22 CN10 U20 CN23 Figure B-1-2 System board layout (Back) Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q.
Board Layout Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08) NUM Location Function (01) CN1 LVDS CONN (02) CN2 Power/B CONN (03) CN3 Key Board CONN (04) CN4 LAN CONN (05) CN5 11.
Board Layout Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08) (24) U9 Embedded Controller IC (25) U11 Clock generator (26) U16 CPU (27) U17 Memory Side Port (28) U1.
Board Layout B.2 Touch Pad Board <Front layout> 08 05 06 09 01 04 03 07 10 02 Figure B-2-1 Touch Pad board layout (Front) NUM Location Function (01) SW1 Mouse Button Left key (02) SW2 Mouse Butt.
Board Layout <Back layout> 02 01 Figure B-2-3 Touch P ad board layout (Back) NUM Location Function (01) CN2 TP Board to TP Module CONN (02) CN1 TP Board to M/B CONN Table B-2-4 Touch Pad board c.
Board Layout B.3 CRT Board <Front layout> Figure B-3-1 Finger Print Board layout (Front) 02 03 01 NUM Location Function (01) CN1 CRT to M/B CONN (02) CN2 CRT CONN (03) CN3 CRT to M/B CONN Table .
Board Layout <Back layout> 01 Figure B-3-3 CRT Board layout (Back) NUM Location Function (01) U1 CRT ESD protection, level-shifting ,sync impedance matching IC Table B-3-4 Finger Print Board con.
Board Layout B.4 Power Board <Front layout> Figure B-4-1 Power Board layout (Front) 02 01 NUM Location Function (01) SW1 Power SW (02) LED1 Power LED Table B-4-2 Power Board connectors Satellite.
Board Layout <Back layout> 01 Figure B-4-3 Power Board layout (Back) NUM Location Function (01) CN1 Pow er/B to M/B CONN Table B-4-4 Power Board connectors Satellite T130D, Satellite Pr o T130D .
Board Layout B.5 SIM (3G) Board <Front layout> Figure B-5-1 SIM (3G) Board layout (Front) 01 NUM Location Function (01) CN1 SIM(3G)/B to M/B CONN Table B-5-2 SIM (3G) Board connectors Satellite .
Board Layout <Back layout> Figure B-5-3 SIM (3G) Board layout (Back) 01 NUM Location Function (01) JSIM1 SIM Card CONN Table B-5-4 SIM (3G) Board connectors Satellite T130D, Satellite Pr o T130D.
Board Layout B.6 HDMI Board <Front layout> 01 02 03 Figure B-6-1 HDMI Board layout (F ront) NUM Location Function (01) CN1 HDMI CONN (02) CN2 USB CONN (03) CN3 HDMI/B to M/B CONN Table B-6-2 HDM.
Board Layout <Back layout> Figure B-6-3 HDMI Board layout (Back) Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08).
Board Layout B.7 ADO+MMC Board <Front layout> 01 02 03 04 05 08 09 10 07 06 Figure B-7-1 ADO+MMC Board layout (Front) Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (.
Board Layout Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08) NUM Location Function (01) CN1 RJ45 CONN (02) CN4 USB CONN (03) CN5 USB CONN (04) CN6 Earphone CONN (0.
Board Layout <Back layout> 02 01 Figure B-7-3 ADO+MMC Board layout (Back) NUM Location Function (01) U4 Codec IC (02) U5 Carder Reader IC Table B-7-4 ADO+MMC Board IC Satellite T130D, Satellite .
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Appendix C Pin Assignment CN1 LCD Panel Connectors PIN No.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) CN 3 Keyboard Connector PIN No. Signal name I/O PIN No.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 3 TX1N --- 4 GND --- 5 TX0P --- 6 TX0N --- CN5 SATA HDD Connector PIN No.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) CN 8 SIM(3G)/B Connector PIN No. Signal name I/O PIN No.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 25 +3V --- 26 NC --- 27 +5V --- 28 +5V --- 29 +5V --- 30 +5VPCU --- 31 +5VPCU --- 32 +5VPCU --- 33 +5VPCU --- 34 +5VPCU --- 35 NC --- 36 MMC_LED# I/O 37 PLTRST# I 38 GND --- 39 USBP11+ I/O 40 USBP11- I/O CN10 RTC Battery Connecto r PIN No.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 19 HDMI_CON_DDCDATA I/O 20 HDMI_CON_DDCCLK O 21 GND --- 22 HDMICLKN O 23 HDMICLKP O 24 GND --- 25 HDMITX0N O 26 HDMITX0P O 27 GND --- 28 HDMITX1N O 29 HDMITX1P O 30 GND --- 31 HDMITX2N O 32 HDMITX2P O CN12 Blue Tooth Connect or PIN No.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) CN15 FAN Connector PIN No. Signal name I/O PIN No. Signal name I/O 1 TH_FAN_POWER1 --- 2 GND --- 3 FANSIG1 O CN16 CRT Connector PIN No. Signal name I/O PIN No .
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 9 GND --- 10 CRT_G O 11 GND --- 12 CRT_R O 13 GND --- 14 NC --- 15 +3V --- 16 +5V --- CN18 HDT Connector PIN No.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 3 SATA_TXN0 O 4 GND --- 5 SATA_RXN0 I 6 SATA_RXP0 I 7 GND --- 8 +3.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 21 GND --- 22 MEM_MA_DATA13 I/O 23 MEM_MA_DATA8 I/O 24 GND --- 25 MEM_MA_DATA9 I/O 26 MEM_MA_D M1 I .
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 71 GND --- 72 GND --- 73 MEM_MB_DATA30 I/O 74 MEM_MB_DATA27 I/O 75 MEM_MB_DATA31 I/O 76 MEM_MB_DATA26 I/O 77 GND --- 78 GND --- 79 MEM_MB_CKE0 I 80 MEM_MB_C KE1 I 81 +1.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 123 MEM_MA_DATA37 I/O 124 MEM_MA_DATA38 I/O 125 MEM_MA_DATA_32 I/O 126 MEM_MA_DATA36 I/O 127 GND ---.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 173 MEM_MA_DATA_54 I/O 174 MEM_MA_DATA_50 I/O 175 MEM_MA_DATA_51 I/O 176 MEM_MA_DATA_55 I/O 177 GND .
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 17 MEM_MA_DATA3 I/O 18 GND --- 19 MEM_MA_DATA2 I/O 20 MEM_MA_DATA9 I/O 21 GND --- 22 MEM_MA_DATA8 I/.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 69 MEM_MB_RESET#2 I/O 70 MEM_MB_DQS3_P I/O 71 GND --- 72 GND --- 73 MEM_MB_DATA30 I/O 74 MEM_MB_DATA27 I/O 75 MEM_MB_DATA31 I/O 76 MEM_MB_DATA26 I/O 77 GND --- 78 GND --- 79 MEM_MB_CKE0 I 80 MEM_MB_CKE1 I 81 +1.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 121 GND --- 122 GND --- 123 MEM_MA_DATA38 I/O 124 MEM_MA_DATA35 I/O 125 MEM_MA_DATA_34 I/O 126 MEM_M.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 171 GND --- 172 GND --- 173 MEM_MA_DATA_54 I/O 174 MEM_MA_DATA_51 I/O 175 MEM_MA_DATA_55 I/O 176 MEM.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 15 GND --- 16 UIM_VPP I 17 NC --- 18 GND --- 19 NC --- 20 3G_EN I 21 GND --- 22 PLTRST# I 23 PCIE_RXN3 O 24 +3V_3G --- 25 PCIE_RXP3 O 26 GND --- 27 GND --- 28 +1.
Pin Assignment Satellite T130D, Satellite Pr oT130D and PORTEGE T130D Maintenance Manual (960-Q08 ) 7 NC --- 8 LAD0 I/O 9 GND --- 10 LAD1 I/O 11 CLK_PCIE_MINI# I 12 LAD2 I/O 13 CLK_PCIE_MINI I 14 LAD3.
Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Appendix. D Appendix D Display Codes D.1 Display Codes Code set 1 Code set 2 Cap No.
Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 29 | 2B AB 5D F0 5D *5 30 Caps Loc.
Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 58 Ctrl 1D 9D 14 F0 14 *3 60 Alt (L.
Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Code set 1 Code set 2 Cap No. Ke ytop Make Break Make Break Note 122 F11 57 D7 78 F0 78 *3 123 F12 5.
Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Code set 1 Code set 2 Cap No. Key top Make Break Make Brea k 55 / E0 AA E0 35 E0 B5 E0 2A E0 F0 12 E.
Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Code set 1 Code set 2 Cap No. Key top Make Break Make Break 75 INS E0 2A E0 52 E0 D2 E0 AA E0 12 E0 .
Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Code set 1 Code set 2 Cap No. Key top Make Break Make Break 09 8 (8) 48 C8 75 F0 75 10 9 (9) 49 C9 7.
Display Codes Satellite T130D, Satellite Pr o T130D and PORTEGE T130D Maintenance Manual (960-Q08 ) Code set 1 Code set 2 Key top Shift Make Make Pause Co mmo n* E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E Table D-1-7 No.
Keyboard Layout Appendix E Keyboard Layout 1. United Status (US) K eyboard Figure E-1-1 US keyboard 2. United Kingdom (UK) K eyboard Figure E-2-1 UK keyboard _____________ ____________ ____________ __.
Keyboard Layout 3. Japan K eyboard Figure E-3-1 Japan keyboard _____________ ____________ ____________ ____________ ____________ _______________ ____________ ____________ ____ Satellite T130D, Satelli.
Wiring Diagrams Appendix F Appendix F Wiring Diagrams F.1 RGB Monitor ID Wraparound connector B Monitor ID Wraparound connector (16PIN to 16PIN) (1) +5V (2) + 3V (3) N C (4) N C (5) GND ( 6 ) D DCDA T.
デバイスToshiba PROT130Dの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Toshiba PROT130Dをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba PROT130Dの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba PROT130Dの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba PROT130Dで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba PROT130Dを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba PROT130Dの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba PROT130Dに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba PROT130Dデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。