ToshibaメーカーPSC0YU-04105Mの使用説明書/サービス説明書
ページ先へ移動 of 216
Satellite/Satellite Pro/C650D/C 655D Maintenance Manual Toshiba Personal Computer Satellite C650D/C655D (PSC16x/PSC17x) Maintenance Manual TOSHIBA CORPORATION S/ No.
ii Satellite/Satellite Pro/C650D/C 655D Maintenance Manual Copyright © 2010 by Toshiba Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of Toshiba. No patent liability is assumed with respect to the use of the inform ation contained herein.
Satellite/Satellite Pro/C650D/C 655D Maintenance Manual iii Preface This maintenance manual describes how to perform hardware service maintenance for the Toshiba Personal Computer Satellite/Satellite Pro/C650D/C655D , referred to as Satellite/Satellite Pro/C650D/C655D in this manual.
iv Satellite/Satellite Pro/C650D/C 655D Maintenance Manual The manual is divided into the following parts: Chapter 1 Hardware Overview describes the Satellite/Satellite Pro/C650D/C655D system unit and each FRU. Chapter 2 Troubleshooting Procedures explains how to diagnose and resolve FRU problems.
Satellite/Satellite Pro/C650D/C 655D Maintenance Manual v Conventions This manual uses the following formats to describe, identify, and highlight term s and operating procedures. Acronyms On the first appearance and whenever necessary for clarification acronyms are enclosed in parentheses following their definition.
vi Satellite/Satellite Pro/C650D/C 655D Maintenance Manual Table of Contents Chapter 1 Hardware Overview 1.1 Features .................................................................................................................. ..............3 1.
Satellite/Satellite Pro/C650D/C 655D Maintenance Manual vii 2.6 Keyboard .............................................................................................................. 2-1 4 Procedure 1 Test Program Check ..............................
viii Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 3.2.8 System Information ................................................................................10 3.2.9 View Logs ..................................................................
Satellite/Satellite Pro/C650D/C 655D Maintenance Manual ix Tools and Equipment ........................................................................................... 4-6 Screw Tightening Torque ....................................................
x Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 4.9 Display Assembly ................................................................................................ 4-25 Removing the Display Assembly ........................................
Satellite/Satellite Pro/C650D/C 655D Maintenance Manual xi Installing the Speakers ....................................................................................... 4-51 4.20 Touchpad Bracket .....................................................
xii Satellite/Satellite Pro/C650D/C 655D Maintenance Manual Appendices Appendix A Handling the LCD Module ........................................................................... A-1 Appendix B Board Layout .........................................
i Satellite/Satellite Pro/C650D/C655D Maintenance Manual Chapter 1 Hardware Overview.
1 Hardware Overview ii Satellite/Satellite Pro/C650D/C 655D Maintenance Manual Chapter 1 Contents 1.1 Features .................................................................................................................. ............. 3 1.2 System Unit Components .
0B1.1 Features 1 Hardware Overview Satellite/Satellite Pro/C650D/C655D Maintenance Manual 3 1.1 Features Toshiba Satellite C650D/C655D and Satellite Pro C650D/C655D is a full size notebook PC based on the mobile AMD Danube Processor, providing high-speed processing capabilities and advanced features.
1 Hardware Overview 0B1.1 Features 4 Satellite/Satellite Pro/C650D/C 655D Maintenance Manual Hard Disk Drive (HDD) The computer accomm odates 2.5-inch 9.5mm height Serial ATA HDD with following storage capacities: y 250 GB (9.5mm thick) SATA (5,400rpm ) y 320 GB (9.
0B1.1 Features 1 Hardware Overview Satellite/Satellite Pro/C650D/C655D Maintenance Manual 5 Sound System CONEX CX20671 integrated audio controller supports multimedia.
1 Hardware Overview 0B1.1 Features Figures 1-1/1-2/1-3 and 1-4 show the com puter and its system unit configuration, respectively. Figure 1-1 ID Parts Description Placement 6 Satellite/Satellite P.
0B1.1 Features 1 Hardware Overview Figure 1-2 Computer Block Diagram Satellite/Satellite Pro/C650D/C655D Maintenance Manual 7.
1 Hardware Overview 0B1.1 Features Figure 1-3 System Board Configurations 8 Satellite/Satellite Pro/C650D/C 655D Maintenance Manual.
1B1.2 System Unit Components 1 Hardware Overview 1.2 System Unit Components Figure 1-4 is Block Diagram of the System Unit. Figure 1-4 System Unit Block Diagram Satellite/Satellite Pro/C650D/C655D Mai.
1 Hardware Overview 1B1.2 System Unit Components 10 Satellite/Satellite Pro/C650D/C 655D Maintenance Manual The system unit of the computer consists of the following com ponents: Processor: Mobile AMD Danube Processor. y AMD AthlonII Dule Core Processor − Core Speed: 2.
1B1.2 System Unit Components 1 Hardware Overview Satellite/Satellite Pro/C650D/C655D Maintenance Manual 11 y North Bridge: AMD RS880M − CPU Interface and Control − ATI Hyper Memory Support − PCI.
1 Hardware Overview 1B1.2 System Unit Components 12 Satellite/Satellite Pro/C650D/C 655D Maintenance Manual y Integrated 2 WRMS (per channel) class- D stereo speaker am plifier with Spread Spectrum an.
1B1.2 System Unit Components 1 Hardware Overview Satellite/Satellite Pro/C650D/C655D Maintenance Manual 13 Clock Generator y SB820M Internal Clock Generator − Generating the clock signal required for the system LAN Controller y ATHEROS_AR8152 - 10/100Mbit − IEEE 802.
1 Hardware Overview 2B1.3 2.5-inch HDD 1.3 2.5-inch HDD The computer contains an extremely low-prof ile, lightweight and high-performance HDD. The HDD incorporates 9.5 mm height m agnetic disk and mini-Winchester type m agnetic heads. The HDD interface conforms to Serial ATA.
3B1.4 DVD Super Multi (+-R Double Layer) 1 Hardware Overview 1.4 DVD Super Multi (+-R Double Layer) The DVD Super Multi drive accepts 12-cm (4.72-in ch) and 8-cm (3.
1 Hardware Overview 4B1.5 Power Supply 16 Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 1.5 Power Supply The power supply unit provides many different volta ges for the system board and perform s the following functions: 1. Power input monitor y Checks whether the DC power supply (AC adapter) is connected to the computer.
5B1.6 Batteries 1 Hardware Overview Satellite/Satellite Pro/C650D/C655D Maintenance Manual 17 1.6 Batteries The computer has the following 2 types of battery: Main Battery Pack Real Time Clock (RTC) Battery Table 1-3 lists the specifications of these batteries.
1 Hardware Overview 5B1.6 Batteries 18 Satellite/Satellite Pro/C650D/C 655D Maintenance Manual State Charge Time Off-State Charge 3/6 Cell About 4 hours max On-State Charge 3/6 Cell About 4~10 hours max NOTE: The time required for normal charge depends on the power consumption by the system.
2 T r oubleshooting Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2-i 2 概要 Chapter 2 T roubleshooting.
2 T r oubleshooting 2-ii Satellite/Satellite Pro/C650D/C655D Maintenance Manual Chapter 2 Contents 2.1 Outline ................................................................................................................... . 2-1 2.2 Basic Flowchart .
2 T r oubleshooting Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2-iii 2.10 Audio T est ............................................................................................................. 2 -20 Procedure 1 T est Program Check .....
.
2.1 Outline 2 T roubleshooting 2-1 Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2.1 Outline This chapter describes the fault diagnosis proce dures for field replaceable units (FRUs) in the computer . The FRUs covered here are as follows: 1. System board 2.
2 T roubleshooting 2.2 Basic Flowchart Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2-2 2.2 Basic Flowchart The basic flowchart in Figure 2-1 serves as a guide for identifying a possibly faulty FRU.
2.2 Basic Flowchart 2 T roubleshooting Connect the AC Adapter BA TTER Y LED / DC IN LED on ?? T urn the power on. Any error message displayed ?? Follow the power supply diagnostic Procedure in Section 2.3 Follow the system board diagnostic Procedure in Section 2.
2 T roubleshooting 2.2 Basic Flowchart Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2-4 Figur e 2-1 Basic Flowchart (2/2) Keyboard works well ?? Follow the keyboard diagnostic procedure in Section 2.6 1 N o Diagnostic Program Loaded?? Perform each test with the diagnostic program.
2.2 Basic Flowchart 2 T roubleshooting 2-5 Satellite/Satellite Pro/C650D/C655D Maintenance Manual If the diagnostic program cannot detect an er ror , the error m ay be intermittent.
2 T roubleshooting 2.3 Power Supply 2.3 Power Supply The power supply in the computer controls ma ny functions and com ponents. T o check if the power supply is defective or malfunctioning, foll ow the troubleshooting procedures below as instructed.
2.3 Power Supply 2 T r oubleshooting Procedure 2 Connection Check Power is supplied to the system board as illustrated below: AC adaptor System board AC power cord AC adaptor cord Battery pack Follow .
2 T r oubleshooting 2.4 System Board Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2-8 2.4 System Board T o check if the system board is defectiv e or malfunctioning, follow the troubleshooting procedures below as instructed.
2.4 System Board 2 T roubleshooting 2-9 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Procedure 2 T est Program Check The maintenance test program contains severa l programs for diagnosing the system board and CPU. Execute the following test programs us ing the procedures described in Chapter 3.
2 T r oubleshooting 2.5 HDD Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2-10 2.5 HDD T o check if the 9.5mm HDD is defective or malfunctioning, follow the troubleshooting procedures below as instructed.
2.5 HDD 2 T r oubleshooting 2-1 1 Satellite/Satellite Pro/C650D/C655D Maintenance Manual partition on drive C. Then r estart th e computer .. If the p r oblem persists, go to Procedur e 3. Check 3 If drive C is listed as active in the FDISK menu, perform Check 4.
2 T r oubleshooting 2.5 HDD T able 2- 1 HDD Err or Code and S tatus Code S tatus 1 Get Parameter Fail ! 2 Read Old Data Error W rite Pattern Erro r 3 4 Read Back Data Error 5 Data Compare Error Restor.
2.5 HDD 2 T r oubleshooting Procedure 5 Connector Check and Replacement Check The HDD, system board or CPU may be faulty . Disassemble the com puter following the steps described in Chapter 4 and perform the following checks: Check 1 Make sure the follow ing connectors have been firmly connected to the HDD, system board and CPU.
2 T roubleshooting 2.6 Keyboard 2.6 Keyboard T o check if the computer ’ s keyboard is def ective or malfunctioning, follow the troubleshooting procedures below as instructed.
2.7 Display 2 T roubleshooting 2.7 Display T o check if the computer ’ s display is def ective or malfunctioning, follow the troubleshooting procedures below as instructed.
2 T r oubleshooting 2.7 Display If there is st ill an erro r , perform Check 4. Check 4 The FL inverter board may be fau lty . Replace it with a new one and return to Procedur e 3. If ther e is still an err or , perform Check 5. Check 5 Make sure the LCD/FL cable has b een firmly connected to the system board and LCD module.
2.8 ODD (Optical Disk Drive) 2 T roubleshooting 2.8 ODD (Optical Disk Drive) T o check if the internal ODD drive is defec tive or malfunctioning, follow the troubleshooting procedures below as instructed.
2 T roubleshooting 2.8 ODD (Optical Disk Drive) Satellite/Satellite Pro/C650D/C655D Maintenance Manual 2-18 Check 3 The ODD drive may be faulty . Replace the ODD drive with a new one following the steps in Chapter 4. If the ODD drive is still not functioning properly , perform Check 4.
2.9 LAN 2 T roubleshooting 2-19 Satellite/Sa tellite Pro/C650D/C655D Maintenance Manual 2.9 LAN T o check if the computer ’ s LAN is defec tive or malfunctioning, follow the troubleshooting procedures below as instructed.
2 T r oubleshooting 2.10Audio T est 2.10 Audio T est T o check if the computer ’ s Speaker is def ective or malfunctioning, fo llow the troubleshooting procedures below as instructed.
2.1 1 1 1BCooling Module 2 T roubleshooting 2.11 Cooling Module T o check if the computer ’ s cooling module is defective or malfunctioning, follow the troubleshooting procedures below as instructed.
Chapter 3 Diagnostic Programs.
3 Diagnostic Programs ii Satellite/Satellite Pro/C6 50D/C655D Maintenance Manual Chapter 3 Contents 3.1 General .......................................................................................................................... 1 3.2 Quick Start .
3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual iii 3.9 Communication (COMM) .......................................................................................... 52 3.10 Peripheral ...................................
.
3.1 General 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 1 3.1 General This chapter explains the dia gnostic programs which tests and di agnoses the functions of the hardware components of this computer. The di agnostic programs can be classified into two types: OPTION and DIAGNOSTIC TEST.
3 Diagnostic Programs 3.1 General 2 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Before running the diagnostic programs, get the following tools prepared: A Service Diagnostic BOOT CD or.
3.2 Quick Start 3 Diagnostic Programs 3.2 Quick Start When the system is booting from Service Diagnostic CD or USB Flash Mem ory, the following screen will be displayed: Please select a test item or select 0 to exit to Free -DOS: 3.
3 Diagnostic Programs 3.2 Quick Start 1. Use arrow key to select ‘TouchPad’ item on ‘Peripheral’ in the m enu, then press Space key to select it. (When it is being selected, there is a X m arked in the [ ] ) Select ‘Test Mouse’ or press F8 to run the test.
3.2 Quick Start 3 Diagnostic Programs Here is another method to run the test: Highl ight a test item by us ing arrow keys, then, press Enter to start. If there are parameters pr ovided, user should set para meters in the parameter dialog window. CPU Speed Test (Step by Step): 1.
3 Diagnostic Programs 3.2 Quick Start 3. Test Result System will automatically run and display the tes t result as follows: Following is the comparison report of the two testing methods m entioned abo.
3.2 Quick Start 3 Diagnostic Programs As to the method adopted in CPU Speed test , user should highlight the test item and press Enter to start testing. And the user has to setup the parameters every time before running the test. Using this method, only one test item would be tested at one time.
3 Diagnostic Programs 3.2 Quick Start It requires user to press the key and ch eck whether the key in the screen changes color or not. User can terminate test by typing ‘ END ’. When testing the ‘ Fn ’ key, it must press the ‘ ESC ’ key at the same time.
3.2 Quick Start 3 Diagnostic Programs NOTE 1: This test only for internal microphone! If the machine doesn't have camera m odule, then it doesn't have internal microphone.
3 Diagnostic Programs 3.2 Quick Start In this screen, there are two lines which attribute could be edited and updated. The 1 st line (the font in yellow with blue background) shows the attribute’s v.
3.2 Quick Start 3 Diagnostic Programs The attributes that have been modified woul d be marked in red; otherwise in yellow. User could press F2 to save the changes, or press F4 to ignore and exit the current program. 3.2.8 System Information This function is used to read the system in formation.
3 Diagnostic Programs 3.2 Quick Start User can use function keys listed on the bottom of the screen to display the configuration of the component or exit the current pr ogram. On the left column, the components information is listed and us er can use arrow keys or PgUp/PgDn to view the list and highlight the chosen component.
3.2 Quick Start 3 Diagnostic Programs 3.2.10 Exit to Free DOS Select this item to exit to Free DOS. 3.2.11 The Diagnostics Screen Explanation Below is an example of running a test item. It includes the following parts: Diagnostics Windows, Test Status Area, Progress Bar, Erro r L ist, Test Item’s Title, Status Bar and Message Box.
3 Diagnostic Programs 3.2 Quick Start Test status and result are disp layed in the upper right corner of the screen. It displays the test status of the current test item – TEST (in testing), PASS (test finished and its result is passed), FAIL (test finished and its re sult is failed) and SKIP (test skipp ed).
3.2 Quick Start 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 15 The status bar is used to indicate the current sc ript setting and test stat us. It consists of two lines that includes the information as f ollows: Test Mode : TIMEBOUND or LOOPBOUND, e.
3 Diagnostic Programs 3.3Option 3.3 Options 3.3.1 Overview In Service Diagnostics, with the Options menu user can configure the batch parameters, test item’s param eters and t hose parameters created by the LOG file. Options Menu Notes: • Select All/None Items Switch between selecting a ll test items and selecting none.
3.3 Option 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 17 • Edit Batch Parameters Configure batch parameters and a ll the test item’s param eters . • Load Batch Parameters Upload all the test items and the param eters to the *.
3 Diagnostic Programs 3.3Option • Test Order Specify the order of the test items. C hoose 'Sequence' to adopt the sequential mode; choose 'Random' to run the test items in random sequence. • Test Options Choose one of the following options: 9 Wait On Error Wait for further confirmation while an error occurs.
3.3 Option 3 Diagnostic Programs Monitor the remaining ba ttery capacity (percent). 9 Monitor CPU Thermal Monitor the CPU temperature. • Test Mode 9 LOOPBOUND The chosen test items will run repeated ly accord ing to the times specified in the 'Number of Loops'.
3 Diagnostic Programs 3.3Option Repeat times of the test item. • Interactive If the item is enabled during the test, the te s t items that need user to response can run normally, such as PS2 Mouse te st; If it is disabled, those test item s will report FAIL.
3.3 Option 3 Diagnostic Programs In this window, you can specify the .INI files that you wanted to be edited or modified. 3.3.5 Save Batch Parameters Here you can save the edited or modified content to the batch parameters files.
3 Diagnostic Programs 3.3Option • Report Destination If selecting 'NONE', no log file will be generated; if selecting 'FILE' , a log file with the name specified in 'Log File Name' will be generated. • Log Options 9 Log Errors If selecting this parameter, errors will be record ed when the test fails.
3.3 Option 3 Diagnostic Programs 9 Log Device Info on Fail If selecting this parameter, deta ils of the failed test will be recorded. • Log file Name Specify the Log file name. You can input the detail p ath of th e file. System will show the detail path of the file.
3 Diagnostic Programs 3.3Option In this screen, you can specify a Log file and view it with the viewer designated in Specify LOG Viewer. 3.3.9 LOG Viewer Service Diagnostic Log viewer: • ↑ , ↓ Scroll a line backward or forward on the screen. • Page Up, Page Down Scroll a page backward or forward on the screen.
3.3 Option 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 25 Prompt the search dialogue for the user to input the string to be looked for and specify the searching method. • F3 Find the next correspond ing strings given.
3 Diagnostic Programs 3.3Option 26 Satellite/Satellite Pro/C650D/C655D Maintenance Manual ITEM TEST FAIL Function ID :502 Error Code :50202 Error Message :Touch Pad Test Fail End Time: Wed Jul 05 10:4.
3.4 Subtests 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 27 3.4 Subtests Test Group Sub Item ID Subtest Test ID Test items Internal Name System 01 CPU 01 Basic Functio.
3 Diagnostic Programs 3.4 Subtests 28 Satellite/Satellite Pro/C650D/C655D Maintenance Manual 10 Data Bus Test [DataBus] 11 Bus Noise [BusNoise ] 12 Memory Speed Test [MemSpeed] Storage 01 HDD 01 Seque.
3.4 Subtests 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 29 VESA 1024x768x32 K Mode VESA 1024 x 768 x 16 K Mode VESA 1024 x 768 x32bit Mode [V1024768_32] 04 VESA Video.
3 Diagnostic Programs 3.5 System Test 3.5 System Test Move arrow keys and press the Space key to select CPU test item from Service Diagnostic menu, then highlight CPU and press the Enter to run this test item.
3.5 System Test 3 Diagnostic Programs CPU Speed Comparison --Whether you want to make a comparison of the CPU speed with the value set in ‘E xpected CPU Speed’, you should choose ‘Yes’; otherwise, ‘No’. Expected CPU Speed --Specify the expected CPU Speed value you want for further comparison.
3 Diagnostic Programs 3.5 System Test 5. CPU Protected Mode Test This test item is to check whether CPU protected m ode instruction works normally. 6. MMX The test item is to confirm whether the CPU supports MMX instru ctions. Subtest 02 Boards 1. DMA Controller This test item is to check whethe r the DMA controller works norm ally.
3.5 System Test 3 Diagnostic Programs 5. Plug and Play This test item is to check: 1. Whether the current system supports Plug-n-Play; 2. Whether there is an ESCD (Extended System Configuration D ata) in the BIOS; 3. Whether there is PCI-to-ISA bridge in the system; 4.
3 Diagnostic Programs 3.5 System Test 34 Satellite/Satellite Pro/C650D/C655D Maintenance Manual.
3.6 Memory Test 3 Diagnostic Programs 3.6 Memory Test This test module is to check whet her the m em ory chip works normally. Subtest 01 BIOS ROM This test item is to check the validity of BIOS ROM that in cludes two sub-items -- ROM Read and ROM Write Protection.
3 Diagnostic Programs 3.6 Memory Test 36 Satellite/Satellite Pro/C650D/C655D Maintenance Manual test coverage would be based on the setting and the value in ‘Percent (%) mentioned at below. Pattern Size: Choose the pattern size – BY TE, WORD, DWORD or ALL.
3.6 Memory Test 3 Diagnostic Programs In addition to the above pattern test of th e memory, there is Read/Write Cycle test and Read Cycle Test for the extended memory. Below is the parameter dialog window of the extended pattern test. Test Range: Specify the test coverage range of Extended Memory.
3 Diagnostic Programs 3.6 Memory Test 2. Read Cycle Test Test by using read instructions. Subtest 04 Walking 1’s Test The test item is to ensure that there is no short circuitry issue in mem ory chip. The parameter dialog window is the same as that in ‘Subtest 02 P attern’.
3.6 Memory Test 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 39 2. Random Increment Read/W rite This test item is to check whether the memory could be correctly accessed with randomized memory address an d a series of incremental data.
3 Diagnostic Programs 3.7 Storage 3.7 Storage Subtest 01 HDD This test item runs on IDE hard disks. It checks the functions and performance of IDE hard disk. In order to protect user’s HDD data, the password must be verified before the HDD test. The screen is as follows: Password : hard disk 1.
3.7 Storage 3 Diagnostic Programs invalid. If user chooses Special Size, the test of IDE HDD will be taken according to the coverage range that user chooses or tim e. e Block Address). the coverage rate in percentage of the total disk. l ined range of the total disk to be tested.
3 Diagnostic Programs 3.7 Storage IDE HDD Test Range —is same as the description of the upper item. LBA Start, LBA End -- specify start and finish byte in LBA(Large Block Time Limit(h): Choose or Input the time (hour) of the defined range of the total Time Limit(m): Choose or Input the time (minute) of the defined range of the tested.
3.7 Storage 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 43 6. gy. SMART test will compare the attribute va lues with the thr esh old value in the controller to confirm whether there is any failure in the HDD Subtes The ODD test runs on ID E CDROM/DVD-ROM & CD-RW.
3 Diagnostic Programs 3.8 Video 3.8 Video This test item tests the video by: 1. displaying the figures in different graphic modes. 2. displaying the property and color of the characters in different text modes. User will confirm whether each video m ode works normally by judging whether the display is correct.
3.8 Video 3 Diagnostic Programs It would display the below texts of th e different attribut es in the screen: 1. Text in normal attribute; 2. Text in blinking normal attribute; 3. Text in inverse attribute; 4. Text in blinking inverse attribute; 5. Text in hi-intensity attribute; 6.
3 Diagnostic Programs 3.8 Video 4. Text Color This test item is to check whether all 16 colors foreground and all 8 colors background works normally in VGA text mode.
3.8 Video 3 Diagnostic Programs This test item is to check whether 80*25 Text Mode works normally. In the test, user is required to respond according to the instru ction in the screen. Subtest 02 640 * 480 VGA Mode This test item is to check whethe r 680*480 VGA Text mode works normally.
3 Diagnostic Programs 3.8 Video Subtest 03 VESA Video Modes This test item is to check whether all the video modes supported by the video card works normally. In the test, user is required to respon d following the instruction in the screen. 1. 640X480 Video Modes Test 2.
3.8 Video 3 Diagnostic Programs If press Ctrl+Break to force the test to term inate during execution of VESA Video Memory, the test program will not operate and display properly in f urther tests. Subtest 05 AGP Test This test item is to report the system’s Accelerated Graphics Port status and check whether AGP registers works normally.
3 Diagnostic Programs 3.8 Video Subtest 07 Register Test This test item is to check whether th e registers of the video adapter works normally. Subtest 08 Color Purity Test This test item is to check whether th e sy stem (the video adapter and the display) could display the purity color of re d, green, blue, black and white.
3.8 Video 3 Diagnostic Programs Subtest 10 DAC/Palette Address This test item is to check the f unction of DAC registers and Palette registers. In the test, user is required to respond according to the instru ction in the screen.
3 Diagnostic Programs 3.9 Communication (COMM) 52 Satellite/Satellite Pro/C650D/C655D Maintenance Manual 3.9 Communication (COMM) Subtest 01 LAN Card This test item is to check whether the m odule can detect the exis tence of the network card and display its related information.
3.10 Peripheral 3 Diagnostic Programs 3.10 Peripheral Subtest 01 Keyboard This test item is to check whether the keyboard works normally. 1. Keyboard Data Line Test Check whether the keyboard data line works norm ally. 2. Keyboard Clock Line Test Check whether the keyboard clock line works normally.
3 Diagnostic Programs 3.10 Peripheral Subtest 03 Led Test 1. Led Test Check whether the green led works normally. 54 Satellite/Satellite Pro/C650D/C655D Maintenance Manual.
3.10 Peripheral 3 Diagnostic Programs Check whether the orange led works normally. Satellite/Satellite Pro/C650D/C655D Maintenance Manual 55.
3 Diagnostic Programs 3.11Error Codes and Description 56 Satellite/Satellite Pro/C650D/C655D Maintenance Manual 3.11 Error Codes and description The format of ‘Error Code’ is ‘ddxxee ’, and .
3.11Error Codes and Description 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 57 04 (XMS)Memory Problem The test pattern read out from the extension memory is different from the one that has been written in this address.
3 Diagnostic Programs 3.11Error Codes and Description 58 Satellite/Satellite Pro/C650D/C655D Maintenance Manual configuration. 17 PCI to ISA Bridge Error PCI-ISA bridge errors. Repeat multiple times. If t h ere is always the same error, replace the board.
3.11Error Codes and Description 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 59 15 VESA VRAM Test Error Physical problems with the video card or the monitor. Check whether there is any physical problem with the video card or the monitor.
3 Diagnostic Programs 3.11Error Codes and Description 60 Satellite/Satellite Pro/C650D/C655D Maintenance Manual 01 Keyboard Map & Stroke Test Fail Keyboard Map & Stroke Test fails. Check the KBD connection and repeat the test. 03 Clock Line Test Fail Clock Line Test fails.
3.11Error Codes and Description 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual 61.
.
3.12 Quick Test Item List 3 Diagnostic Programs Satellite/Satellite Pro/C650D/C655D Maintenance Manual i 3.12 Quick Test Item List Device Test Items Comment CPU Basic Functionality N PU Basic Function.
Chapter 4 Replacement Procedures 4 1.
4 Replacement Procedures 4-ii Satellite/Satellite Pro/C650D/C655D Maintenance Manual.
4 Replacement Procedure s Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-1 Chapter 4 Contents 4.1 General .................................................................. Fehler! Textmarke nicht definiert. Safety Precautions ..............
4 Replacement Procedures 4-2 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Assembling the ODD Drive ............................ Fehler! Textmarke nicht definiert. 4.6 Keyboard and RTC battery ................................... Fehler! Textmarke nicht definiert.
4 Replacement Procedure s Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-3 Removing the LED module ............................ Fehler! Textmarke nicht definiert. Installing the LED Module ............................. Fehler! Textmarke nicht definiert.
4 Replacement Procedures 4-4 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Figures Figure4-1 Removing the battery pack .................................................................................. 4-8 Figure 4-2 Removing the PC card ....
4 Replacement Procedure s Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-5 Figure 4-28 Removing the LCD module and screw ............................................................ 4-43 Figure 4-29 Removing the LCD module ..................
4.1 General 4 Replacement Procedures 4 1 4.1 General This chapter explains how to disassemble the computer and replace Field Replaceable Units (FRUs). Some replacement procedures m ay not require you to remove all the surrounding FRUs to replace only one FRU.
4 Replacement Procedures 4.1 General 4-2 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Safety Precautions Before you begin to disassembly read the following safety precautions carefully. Be sure to follow them while you are working. DANGER: 1.
4.1 General 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-3 CAUTION: 1. Before replacing a component, make su re that the replacement component meets the required specifications. To avoid computer failures, never use components that do not meet the specifications.
4 Replacement Procedures 4.1 General 4-4 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Before You Begin Before you begin to disassembly the computer, keep in m ind the precautions and advice in this section. Always begin disassembly by removing the AC adapter and battery pack.
4.1 General 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-5 Disassembly Procedures The cable connectors come in these two basic types: Pressure plate connectors.
4 Replacement Procedures 4.1 General 4-6 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Tools and Equipment For your safety and that of other people in the working environment, it is strongly recommended that you use electrostatic discharge (ESD) equipm ent.
4.1 General 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-7 Colors of Screw Shanks For easy identification of the correct screws, the screw shanks are colored accor.
4 Replacement Procedures 4.2 Battery Pack/Bridge Media 4.2 Battery Pack/Bridge Media 4.2.1 Battery Pack Removing the Battery Pack Remove the battery pack according to the following procedures and Figure 4-1. CAUTION: When handling the battery packs, use care not to short circuit the terminals.
4.2 Battery Pack/Bridge Media 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-9 Installing the Battery Pack Install the battery pack according to the following procedures and Figure 4-1.
4 Replacement Procedures 4.2 Battery Pack/Bridge Media 4.2.2 Bridge Media Removing the Bridge Media Remove the Bridge Media according to the following procedures and Figure 4-2, after checking that the computer is turned off in boot mode. 1. Push a Bridge media.
4.3 MDC Module 4 Replacement Procedures 4.3 Memory Module Removing the Memory Module Remove the mem ory module according to the following procedures and Figures 4-3, after checking that the computer is turned off in boot mode. CAUTION: Remove the optional memory after turning off the computer.
4 Replacement Procedures 4.3 MDC Module 4-12 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Installing the Memory Module Install the memory m odule according to the following procedures and Figures 4-3, after checking that the computer is turned off in boot mode.
4.4 HDD 4 Replacement Procedures 4.4 HDD Removing the HDD CAUTION: Do not press on the top or bottom of the drive. Applying such pressure can either corrupt the data in the drive or damage the drive. Remove the HDD (hard disk drive) according to the following procedures and Figures 4-4, 4- 5.
4 Replacement Procedures 4.4 HDD HDD pack M2 5x3 black flat head screw . HDD cover Figure 4-4 Removing the HDD pack NOTE: Do not disassemble the HDD pack when it is working normally. Disassemble or replace the HDD pack only if it fails. 4. Place the HDD pack on a flat surface (such as a desk), and remove the four M2x2 black flat head screws.
4.4 HDD 4 Replacement Procedures HDD chassis HDD M2x2 black flat head screw M2x2 black flat head screw Figure 4-5 Removing the HDD chassis CAUTION: Do not apply pressure to the top or bottom of the drive.
4 Replacement Procedures 4.4 HDD 4-16 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Installing the HDD Install the HDD according to the following procedures and Figures 4-4, 4-5. CAUTION: To avoid damage, always hold the HDD only by its sides.
4.5 ODD Bay Module 4 Replacement Procedures 4.5 ODD Bay Module Removing the ODD Bay Module NOTE: The installation and removal procedures are the same for all the modules that can be installed in the ODD bay. See the appropriate sections for the disassembly procedures of specific modules.
4 Replacement Procedures 4.5 ODD Bay Module 4-18 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Installing the ODD Bay Module Install the ODD bay module according to the following procedures and Figures 4-6. 1. Place the ODD bay module in the correct position and slide it in.
4.5 ODD Bay Module 4 Replacement Procedures Disassembling the ODD Drive NOTE: Do not disassemble the ODD drive when it is working normally. Disassemble or replace the ODD drive only if it fails. Disassemble the ODD drive according to the following procedures and Figure 4-7.
4 Replacement Procedures 4.6 Keyboard 4.6 Key board and RTC battery Removing Keyboard and RTC battery Remove the Keyboard and RTC battery according to the following procedures and Figure 4- 8. 1. Release the following 13 latches on the keyboard cover, in that order: - One latch on right side and one latch on left sides.
4.6 Keyboard 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-21 Installing the Keyboard and RTC battery Install the keyboard and RTC battery according to the following procedures and Figure 4-8. 1. Place RTC battery in battery locker in the correct position 2.
4 Replacement Procedures 4.7 Wireless LAN card 4.7 Wireless LAN Card Removing the Wireless LAN Card Remove the wireless LAN card according to the following procedures and Figure 4-9. CAUTION : Do not touch the connectors on the wireless LAN card and in the computer with your bare hands.
4.7 Wireless LAN Card 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-23 Installing the Wireless LAN Card Install the wireless LAN card according to the following procedures and Figure 4-9. 1. Insert the wireless LAN card into the CN1300 an angle of 45 degrees.
4 Replacement Procedures 4.8 Top Cover 4.8 Top Cover Removing the Top Cover Remove the top cover according to the following procedures and Figures 4-10 and 4-11. Turn the computer upside down and remove the following 20 screws: - Sixteen M2.5x6 black flat head screws.
4.8 Top Cover 4 Replacement Procedures Speaker cable Power board cable T ouch pad board flat cable CN600 CN200 CN280 T op cover Latch Figure 4-11 Removing the top cover Installing the Top Cover Install the top cover with the display assembly according to the following procedures and Figures 4-10, 4-11.
4 Replacement Procedures 4.9 Display Assembly 4.9 Display Assembly Removing the Display Assembly CAUTION: Use care to avoid that the antenna cable is not caught between the display assembly and computer. Remove the display assembly according to the following procedures and Figures 4-1 2 .
4.9 Display Assembly 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4-27 6. Remove the display module..
4 Replacement Procedures 4.9 Display Assembly 4-28 Satellite/Satellite Pro/C650D/C655D Maintenance Manual Installing the Display Assembly Install the display assembly according to the following procedures and Figures 4-12. 1. Place the display panel in the correct position and push the wireless antenna cable into the bottom cover.
4 Replacement Procedures 4.10 System board 4.10 System Board Removing the System Board NOTE: Be careful of the eject button for the PC card. It can be damaged when removing the board. Make sure it is securely installed. Remove the System Board according to the following procedures and Figure 4-13.
4. 10 System board 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4- - 29 Installing the System Board Install the System Board according to the following procedures and figure 4-13. NOTE: Be careful of the eject button for the PC card.
4 Replacement Procedures 4.11 CPU cooling Module and Fan 4- - 30 Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4.11 CPU Cooling Module and Fan CAUTION: When removing the cooling module, keep the following in mind: The cooling module can become very hot during operation.
4.11 CPU cooling Module and Fan 4 Replacement Procedures M2x5 white flat head screw FA N Figure 4-14 Removing the fan 1 2 3 4 M2x2 black flat head screw CPU cooling module Figure 4-15 Removing the CPU.
4 Replacement Procedures 4.11 CPU cooling Module and Fan Figure 4-16 Applying silicon grease Thermal pad CPU cooling module Figure 4-17 Replace new thermal pad into correct position.
4.11 CPU cooling Module and Fan 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4- - 33 Installing the CPU Cooling Module and Fan Install the cooling Module according to the following procedures and Figures 4-14, 4-15, 4-16, 4-17, and 4-18.
4 Replacement Procedures 4.12 CPU 4.12 CPU Removing the CPU Remove the CPU according to the following procedures and Figures 4-19, 4-20 and 4-21. CAUTION: When removing the CPU, keep the following in mind: The CPU can become very hot during operation.
4.12 CPU 4 Replacement Procedures Installing the CPU Install the CPU according to the following procedures and Figures 4-19, 4-20, 4-21 and 4-22. 1. Check that the triangle on the cam is in the unlock position. 2. Attach the CPU to the correct position in the CPU socket.
4 Replacement Procedures 4.12 CPU 3. Secure the CPU by rotating the cam 120 degrees to the right with a flat-blade screwdriver. NOTE: FOXCONN CPU socket will be 180 degrees to the left.
4.13 Display Mask 4 Replacement Procedures 4.13 Display Mask Removing the Display Mask Disassemble the ODD drive according to the following procedures and Figure 4-23. 1. Peel off four seal tapes and remove four M2.5x5 black flat head screws securing the display mask.
4 Replacement Procedures 4.14 FL Inverter B oard 4.14 FL Inverter Board (for CCFL panel) Removing the FL Inverter Board Remove the FL inverter board according to the following procedures and Figures 4-24. HV cable LCD FL cable FL inverter board Figure 4- 24 Removing the FL inverter board 1.
4.14 FL Inverter Boa rd 4 Replacement Procedures Satellite/Satellite Pro/C650D/C655D Maintenance Manual 4 - 39 Installing the FL Inverter Board Install the FL inverter board according to the following procedures and Figures 4- 24 . 1. Connect the LCD/FL cable to LCD/FL connector, and connect the HV cable to the HV connector.
4 Replacement Procedures 4.15 LCD Module (CCFL panel) 4- - 40 Satellite/Satellite Pro/C650D/C655D Maintenance Manu al 4.15 LCD Module (CCFL panel) NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of the LCD module .
4.15 LCD Module (CCFL panel) 4 Replacement Procedures Right LCD bracket Left LCD bracket LCD module M2 5x5 black flat head screw . M2 5x5 black flat head screw .
4 Replacement Procedures 4.15 LCD Module (CCFL panel) Installing the LCD Module NOTE: LCD/FL cable must be carefully peeled away before disconnecting it from the module. Install the LCD module according to the following procedures and Figures 4-25, 4- 26 .
4.16 LED Module (LED panel) 4 Replacement Procedures Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 4 - 43 4.16 LED Module (LED panel) NOTE: ICs are fragile. Use extreme care not to apply pressure to the ICs along the edges of the LED module .
4 Replacement Procedures 4.16 LCD Module (LED panel) Right LCD bracket Left LCD bracket LCD module M2 5x5 black flat head screw . M2 5x5 black flat head screw .
4.16 LED Module (LED panel) 4 Replacement Procedures Installing the LED Module NOTE: LCD/FL cable must be carefully peeled away before disconnecting it from the module. Install the LED module according to the following procedures and Figures 4-27, 4- 28 .
4 Replacement Procedures 4.17 CCD board and MIC 4.17 CCD Board and MIC Removing the CCD Board and MIC Remove the FL inverter board according to the following procedures and Figure 4-29. 1. Remove the CCD and MIC module from display rear cover. CCD and MIC module Figure 4-29 Removing the CCD board and MIC 2.
4.117 CCD board and MIC 4 Replacement Procedures Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 4 - 47 Installing the CCD Board and MIC Install the FL inverter board according to the following procedures and Figure 4-29. 1. Seat the CCD and MIC module in the correct position.
4 Replacement Procedures 4.18 Power button board 4.18 Power Button Board Removing the Power Button Board Remove the Power Button Board according to the following procedures and Figures 4-30. 1. Remove two M2x2 black flat head screws. 2. Remove the Power button board.
4.18 Power button board 4 Replacement Procedures Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 4 - 49 Install the Power Button Board Install the Power Button Board and Switch Board according to the following procedures and Figures 4-30. 1. Seat the Power button board in the correct position.
4 Replacement Procedures 4.19 Speakers 4.19 Speakers Removing the Speakers Remove the Speakers according to the following procedures and Figure 4-31. 1. Remove two M2x3 black flat head step screw securing the left speaker. 2. Remove two M2x3 black flat head step screws securing the right speaker.
4 . 19 Speakers 4 Replacement Procedure s Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 4 - 51 Installing the Speakers Install the speakers according to the following procedures and Figure 4-31. 1. Seat the left and right speaker in the correct position.
4 Replacement Procedures 4.20 Touchpad bracket 4.20 Touchpad Bracket Removing the Touchpad Bracket Remove the Touchpad Bracket according to the following procedures and Figure 4-32. 1. Disconnect the touch pad flat cable. 2. Release two M2x3 black flat head screws securing the touchpad Bracket.
4.20 Touchpad bracket 4 Replacement Procedure s Satellite/Satellite Pro/C650D/C 655D Maintenance Manual 4 - 53 Installing the Touchpad bracket Install the button board according to the following procedures and Figure 4-32. 1. Seat the Touchpad bracket in the correct position.
6000 1 次 Appendices.
Appendices App-ii Satellite/Satellite Pro/C650D/C655D Maintenance Manual Appendix Contents Appendix A Handling the LCD Module .......................................................................... A-1 Appendix B Board Layout ......................
Apx. A Handling the LCD Module Appendices Appendix A Appendix A Handling the LCD Module Precautions for handling the LCD module The LCD module can be easily damaged during assem bly or disassembly. Observe the following precautions when handling the LCD module: 1.
Appendices Apx. A Handling the LCD Module 3. If the panel’s surface gets dirty, wipe it with cotton or a soft cloth. If it is still dirty, try breathing on the surface to create a light condensate and wipe it again. If the surface is very dirty, we recommend a CRT cleaning agent.
Apx. A Handling the LCD Module Appendices 5. Glass is used in the panel, so be careful not to drop it or let it strike a hard object, which could cause breakage or cracks. 6. CMOS-LSI circuits are used in the module, so guard against damage from electrostatic discharge.
Appendices Apx. A Handling the LCD Module 7. Do not expose the module to direct sunlight or strong ultraviolet rays for long periods. 8. Do not store the module at temperatures below specifications. Cold can cause the liquid crystals to freeze, lose their elasticity or otherwise suffer damage.
Apx. A Handling the LCD Module Appendices 9. Do not disassemble the LCD module. Disassem bly can cause malfunctions. 10. If you transport the module, do not use pack ing m aterial that contains epoxy resin (amine) or silicon glue (alcohol or oxide). These materials can release gas that can damage the panel’s polarization.
Apx. B Board Layout Appendices Appendix B Appendix B Board Layout B.1 System Board Front View Figure B-1 Board Layout (Front) Satellite/Satellite Pro/C650D/C 655D Maintenance Manual B-1.
Appendices Apx. B Board Layout B.2 System Board Back View Figure B-2 Board Layout (Back) B-2 Satellite/Satellite Pro/C650D/C655D Maintenan ce Manual.
Apx. C Keyboard Scan/Character Codes Appendices Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual C-1 Apx. C Keyboard Scan/Character Codes Appendix C Keyboard Scan/Character Codes Table C-1 Scan Codes (set 1 and set 2) (1/4) Cap No.
Appendices Apx. D Keyboard Scan/Character Codes C-2 Satellite/Satellite Pro/C650D/C655D Maintenance Ma nual Table C-1 Scan Codes (set 1 and set 2) (2/4) Cap No.
Apx. C Keyboard Scan/Character Codes Appendices Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual C-3 Table C-1 Scan Codes (set 1 and set 2) (3/4) Cap No.
Appendices Apx. D Keyboard Scan/Character Codes C-4 Satellite/Satellite Pro/C650D/C655D Maintenance Ma nual Table C-1 Scan Codes (set 1 and set 2) (4/4) Cap Code set 1 Cod e set 2 No te No.
Apx. C Keyboard Scan/Character Codes Appendices Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual C-5 Table C-2 Scan Codes with left Shift key Cap No.
Appendices Apx. D Keyboard Scan/Character Codes C-6 Satellite/Satellite Pro/C650D/C655D Maintenance Ma nual Table C-3 Scan Codes in Numlock mode Cap No.
Apx. C Keyboard Scan/Character Codes Appendices Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual C-7 Table C-5 Scan Codes in overlay mode Cap No.
Appendices Apx. D Keyboard Scan/Character Codes C-8 Satellite/Satellite Pro/C650D/C655D Maintenance Ma nual Table C-7 No.126 key scan code Key top Sh ift Co de set 1 Code se t 2 Make Make Pause Co mm o n* E1 1D 45 E1 9D C5 E1 14 77 E1 F0 14 F0 77 Ctrl* E0 46 E0 C6 E0 7E E0 F0 7E *: This key generates only make codes.
Apx. D Key Layout Appendices Apx. D Key Layout Appendix D Key Layout D.1 United States (US) Keyboard Figure D-1 US keyboard D.2 Taiwan (TW) Keyboard Figure D-2 TW keyboard Satellite/Satellite Pro/C650.
Appendices Apx. D Key Layout D.3 Thai (TH) Keyboard Figure D-3 TH keyboard D.4 Russian (RU) Keyboard Figure D-4 RU keyboard D-2 Satellite/Satellite Pro/C650D/C655D Maintenance Manual.
Apx. D Key Layout Appendices D.5 Hebrew (HE) Keyboard Figure D-5 HE keyboard D.6 Korean (KR) Keyboard Figure D-6 KR keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-3.
Appendices Apx. D Key Layout D.7 UK-English (UK) Keyboard Figure D-7 UK keyboard D.8 DU, UE, US International (USE) Keyboard Figure D-8 USE keyboard D-4 Satellite/Satellite Pro/C650D/C655D Maintenance.
Apx. D Key Layout Appendices D.9 Danish (DK) Keyboard Figure D-9 DK keyboard D.10 Swiss/Switzerland (SL) Keyboard Figure D-10 SL keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-5.
Appendices Apx. D Key Layout D.11 Arabic (AR) Keyboard Figure D-11 AR keyboard D.12 Czech (CZ) Keyboard Figure D-12 CZ keyboard D-6 Satellite/Satellite Pro/C650D/C655D Maintenance Manual.
Apx. D Key Layout Appendices D.13 Portuguese (PT) Keyboard Figure D-13 PT keyboard D.14 Slovakian (SK) Keyboard Figure D-14 SK keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-7.
Appendices Apx. D Key Layout D.15 Italian (IT) Keyboard Figure D-15 IT keyboard D.16 French (FR) Keyboard Figure D-16 FR keyboard D-8 Satellite/Satellite Pro/C650D/C655D Maintenance Manual.
Apx. D Key Layout Appendices D.17 German (GR) Keyboard Figure D-17 GR keyboard D.18 Greek (GK) Keyboard Figure D-18 GK keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-9.
Appendices Apx. D Key Layout D.19 Hungary (HU) Keyboard Figure D-19 HU keyboard D.20 Spanish (SP) Keyboard Figure D-20 SP keyboard D-10 Satellite/Satellite Pro/C65 0D/C655D Maintenance Manual.
Apx. D Key Layout Appendices D.21 Turkey (TR) Keyboard Figure D-21 TR keyboard D.22 Turkish F (TF) Keyboard Figure D-22 TF keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-11.
Appendices Apx. D Key Layout D.23 Swedish (SW) Keyboard Figure D-23 SW keyboard D.24 Belgian (BE) Keyboard Figure D-24 BE keyboard D-12 Satellite/Satellite Pro/C65 0D/C655D Maintenance Manual.
Apx. D Key Layout Appendices D.25 Yugoslavia (YU) Keyboard Figure D-25 YU keyboard D.26 Norwegian (NO) Keyboard Figure D-26 NO keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-13.
Appendices Apx. D Key Layout D.27 Scandinavian (N5) Keyboard Figure D-27 N5 keyboard D.28 Canadian Bilingual (CB) Keyboard Figure D-28 CB keyboard D-14 Satellite/Satellite Pro/C65 0D/C655D Maintenance.
Apx. D Key Layout Appendices D.29 Romania (RO) Keyboard Figure D-29 RO keyboard D.30 Bulgaria (BU) Keyboard Figure D-30 BU keyboard Satellite/Satellite Pro/C650D/C6 55D Maintenance Manual D-15.
Appendices Apx. D Key Layout D.31 Japan (JP) Keyboard Figure D-31 JP keyboard D-16 Satellite/Satellite Pro/C65 0D/C655D Maintenance Manual.
デバイスToshiba PSC0YU-04105Mの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Toshiba PSC0YU-04105Mをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba PSC0YU-04105Mの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba PSC0YU-04105Mの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba PSC0YU-04105Mで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba PSC0YU-04105Mを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba PSC0YU-04105Mの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba PSC0YU-04105Mに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba PSC0YU-04105Mデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。