ToshibaメーカーSD-R5002の使用説明書/サービス説明書
ページ先へ移動 of 18
TOSHIBA AMERICA INFORMA TION SYSTEMS STORAGE DEVICE DIVISION IRVINE, CALIFORNIA SD-R5002 D VD REWRITEABLE DRIVE USER MANU AL.
CONTENTS Introductio n .............................................................................. 1 Setup ........................................................................................ 3 Using the D VD Rewr iteable Dr ive ...............
1 INTR ODUCTION – SD-R5002 General Features Reads and record s digital data on DVD-R/-RW and CD-R/-RW discs CD-R/-RW disc write/rewrite at 16X/10X DVD-R/-RW disc write/rewrite at 2X/1X 3-way Disc Ej.
Front Panel Figure 1.SD-R5002 DVD Write able Drive Front Panel Loading Tray Load disc using tray. Busy Light LED The LED lights green or amber whe n the drive is operating (LED is amber whe n drive is writing.) Eject Button The Eject button is used to open the disc tra y so you can install or remove a disc.
3 SETUP – SD-R5002 The following steps must be performe d to properly install your drive: • Set Drive Jumper Settings • Connect Audio Cable • Attach IDE BUS Cable • Attach Power Cable • Mount Drive Jumper Settings The mode select jumpers are 6 straight angle pin s located on the rear of the DVD Rewriteable drive.
4 Placing DVD Rewriteable Drive inside your Computer Now that you have set the jumpers, you are read y to install your DVD Rewriteable drive insid e your computer. Important Note: Disconnect power fr om your co mputer system befo re beginning installation.
5 Power Cable - Connect an internal computer p ower supply cable to the power so cket at the back of the DV D Rewriteable drive. One si de of the plug has chamfered edges, so the power connector fits onl y one way. Push plug completely into the socket making sure the plug fits correctly.
6 Software Driver - Toshiba' s optical drives do not requi re any unique devi ce drivers for Windows '95/'98/2000/Me/XP/NT. After installing your drive and re-booting, your system should recognize your drive.
7 USING THE D VD Rewriteable Drive – SD-R5002 Drive Operation Inserting a Disc - Horizontally To insert a disc into a drive that is moun ted horizont ally, perform the following steps: Figure 1.Inserting Disc 1. Open the drive's L oading tra y b y pressing the Eject Button.
8 Figure 2.Inserting Disc Vertically Removing a Disc To remove a disc from the DVD Rewrite able d rive, perform the following steps: 1. Open the Loading T r ay by pressing the Eject Button. 2. Slide disc holders a wa y from disc. 3. Grasp disc by edges , and lift out of loading tra y .
9 Usage Guidelines • K eep the disc tra y closed when not using the D VD Rewriteable Drive . • Do not press do wn on the disc tra y when opening o r closing it. • Do not place objects on the disc tra y . • Ne ve r use a damaged, broken, or d efo r med disc.
10 TR OUBLESHOO TING – SD-R5002 Problem Solution Disc tra y cannot be opened • Check that there is pow er to drive. • Use Emergency Eject instructi ons to open tray . Drive is not recognized by system • Is the drive connected proper ly? Are all cables plugged in proper ly (e.
11 SPECIFICA TIONS –SD-R5002 General Interf ace: A T API Applicable Formats - Write: Write Formats CD-R/RW DVD-R/RW Disc at once, Track at once, session at once, Packet Write, in cremental write, re.
12 Performance Rotational Speed DVD-ROM (single layer) DVD-ROM (dual layer) DVD-R (Ver. 1.0) DVD-R (Ver. 2.0) DVD-RW (Ver 1.1) DVD-video (CSS-Disc) DVD-R (Ver 2.0) (Write) DVD-RW (Ver 1.1) (Write) CD-ROM, CD-R CD-RW CD-DA Transfer CD-DA, Video-CD CD-R (Write) High Speed CD-RW (Write) CD-RW (Write) 7,580rpm (5.
13 Reliability MTBF 100,000 hours P ower ON Hours 5,436 hours/y ear ON/OFF Cycles 313 cycles/y ear Number of Access 600,000 accesses/y ear Operating Duty Cycle 20% of P ower ON time (Reading/Seeki ng) 2% of P ower ON time (Writing/Seeking) MTTR 0.
14 Regulatory The SD-R5002 D VD Wr iteable drive has been ce r tified by the f ollowing regulatory agencies: • UL 1950 • CSA C22.2 No . 950 • TUV (EN60950I) • CE standard • DHHS 21 CFR Sub-C.
15 DRIVE CONNECT ORS –SD-R5002 Figure 1.SD-R5002 DVD Rew riteable Drive Rear Panel - Conne ctors Power Connector Power is supplied to your DVD d rive by the connection with your computer's +5V/+12V power cable to the power socket at the back of drive.
16 Table 1.Interface Pin Assignments INTERFACE PIN ASSIGNMENT PIN NO . I/O SIGNAL NAME HOST SIGNAL NAME PIN NO . I/O SIGNAL NAME HOST SIGNAL NAME 1 I Reset Host Reset 21 O HDRQ DMA Request 2 - GND 22 .
デバイスToshiba SD-R5002の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toshiba SD-R5002をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba SD-R5002の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba SD-R5002の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba SD-R5002で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba SD-R5002を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba SD-R5002の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba SD-R5002に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba SD-R5002デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
