ToshibaメーカーSD-V291の使用説明書/サービス説明書
ページ先へ移動 of 72
D VD VIDEO PLA YER & VIDEO C ASSETTE RECORDER SD-V291 OWNER’S MANUAL 2 14 22 29 34 39 Introduction Connections Basic setup Playback (VCR) Recording (VCR) Other functions (VCR) DIGITAL VIDEO ©20.
2 Introduction IMPORT ANT SAFEGUARDS W ARNING: T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, do not expose this appliance to rain or moisture. CAUTION: TO PREVENT ELECTRIC SHOCK DO NOT USE THIS POLARIZED PLUG WITH AN EXTENSION CORD, RECEPT ACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULL Y INSER TED T O PREVENT BLADE EXPOSURE.
3 Introduction 1. READ INSTRUCTIONS All the safety and operating instructions should be read before the unit is operated. 2. RET AIN INSTRUCTIONS The safety and operating instructions should be retained for future reference. 3. HEED W ARNINGS All warnings on the unit and in the operating instructions should be adhered to.
4 Introduction IMPORT ANT SAFEGUARDS 13. LIGHTNING T o protect your unit from a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the unit due to lightning and power line surges.
5 Introduction EXAMPLE OF ANTENNA GROUNDING AS PER THE NA TIONAL ELECTRICAL CODE 24. LASER BEAM Do not look into the opening of the disc tray or ventilation opening of the product to see the source of the laser beam. It may cause sight damage. 25. DISC Do not use a cracked, deformed, or repaired disc.
6 Introduction Notes on handling When shipping the DVD/VCR, the original shipping carton and packing materials come in handy . For maximum protection, repack the unit as it was originally packed at the factory . Do not use volatile liquids, such as insect spray , near the DVD/VCR.
7 Introduction Notes on discs On handling discs Do not touch the playback side of the disc. Do not attach paper or tape to discs. On cleaning discs Fingerprints and dust on the disc cause picture and sound deterioration. Wipe the disc from the center outwards with a soft cloth.
8 Introduction DIGITAL VIDEO About this owner ’ s manual This owner ’s manual explains the basic instructions of this DVD/VCR. Some DVD video discs are produced in a manner that allows specific or limited operation during playback. As such, the DVD/VCR may not respond to all operating commands.
9 Introduction IMPORTANT SAFEGUARDS .......................... 2 Power source ................................................... 5 Precautions ...................................................... 6 Notes on discs ...................................
10 Introduction Identification of controls See the page in for details. Front panel Rear panel When connecting the optical digital cable, remove the cap and fit the connector into the jack firmly. When not using the jack, keep the cap inserted to protect it from dust intrusion.
11 Introduction VCR operation status CH 125 8 : 47 AM MON 00 : 00 : 00 SP STEREO SAP While watching TV DAY OF THE WEEK CHANNEL TAPE SPEED REAL TIME COUNTER CLOCK STEREO AND SECOND AUDIO PROGRAM (SAP) .
12 Introduction Remote control * MENU button Use the MENU button to display the menu included on many DVD video discs. T o operate a menu, follow the instructions in “DVD Menu.” 54 Identification of Controls (continued) The instructions in this manual describe the functions on the remote control.
13 Introduction Operation • Aim the remote control at the remote sensor and press control buttons to operate. • Operate the remote control within 30 ° angle on either side of the remote sensor , up to a distance of Approx. 7 meters. Replace the compartment cover .
14 Connections OUT (TV) IN (ANT) Notes: • A clear picture will not be obtained by the DVD/VCR unless the antenna signal is good. Connect the antenna to the DVD/VCR properly . • For better quality recording, an indoor antenna or a telescopic antenna is not recommended.
15 Connections UHF VHF Note: If a VHF or UHF antenna is used, set the TV/CATV menu option to the “TV” mode. Note: If a VHF or UHF antenna is used, set the TV/CATV menu option to the “TV” mode. Note: If a VHF or UHF antenna is used, set the TV/CATV menu option to the “TV” mode.
16 Connections CA TV (CABLE TV) connections Many cable companies offer services permitting reception of extra channels including pay or subscription channels.
17 Connections This DVD/VCR cannot receive scrambled programs since it does not contain a descrambler . In order to receive scram- bled programs, your existing descrambler must be used. Descrambler boxes are available from cable companies. Con- sult your local cable company for more information concerning connection to their descrambler equipment.
18 Connections Connecting to a TV Connect the DVD/VCR to your TV . Note: This method transports VHS and DVD-video signals. For enhanced DVD-video performance, we recommend you also connect the S-video or ColorStream ® component video outputs to your TV/monitor .
19 Connections T o P R/ C R video input T o P R /C R VIDEO OUT Notes: • Refer to the owner ’ s manual of the connected equipment as well. • When you connect the DVD/VCR to other equipment, be sure to turn off the power and unplug all of the equipment from the wall outlet before making any connections.
20 Connections 75 Ω coaxial cable Connecting to optional equipment Y ou can enjoy high quality dynamic sounds of DVD video discs or audio CDs by connecting the DVD/VCR to optional audio equipment. For connection to your TV , see “Connecting to a TV” 18 19 .
21 Connections 75 Ω coaxial cable Optical digital cable 75 Ω coaxial cable W arning When playing DTS-encoded discs (audio CDs), excessive noise may be output from the analog stereo jacks.
22 Basic setup Setting the video channel When a TV is connected with the 75 ohm coaxial cable only . T o view playback of a recorded tape or DVD disc, or to watch a program selected by the VCR's channel selector , the TV must be set to channel 3 or 4 (video channel).
23 Basic setup Press SET + or – to select “LANGUAGE”, then press ENTER. Press VCR MENU. The VCR menu screen will appear . Press SET + or – to select “SYSTEM SETUP”, then press ENTER . If you use the unit for the first time and press VCR MENU , instead of the main menu screen the “SYSTEM SETUP” menu screen in step 2 may appear .
24 Basic setup Connect the Antenna or Cable system. • If you use a cable box, turn it on. Cloc k setting The AUT O CLOCK function will automatically set the built-in clock (Month, Day , Y ear and T ime) when the DVD/VCR is connected to an Antenna or Cable system and it is turned off.
25 Basic setup Press VCR MENU. 1 Press SET + or – to select “SYSTEM SETUP”, then press ENTER. 2 Press SET + or – to select “ST ANDARD TIME” , then press ENTER. 3 Press SET + or – to select your time zone, then press ENTER. 4 Press VCR MENU twice to return to the normal screen.
26 Basic setup CANCEL Press VCR MENU. EXAMPLE: Setting the clock to “8:30 AM” October , 26 (SUN), 2003. 1 8 : 30 AM SUN Manual clock Setting After setting the clock, date and time starts functioning automatically . 6 Note: After a power failure or disconnection of the power, the timer settings will be lost.
27 Basic setup T uner setting This DVD/VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory , skipping over unwanted channels. Before selecting channels, they must be programmed into the DVD/VCR’s memory .
28 Basic setup Repeat the step 1 on page 27. Then press SET + or – to select the “ADD/DELETE” and press ENTER. 1 T o ADD/DELETE channels Press VCR MENU until the menu screen is cleared.
29 Playback (VCR) Loading and unloading a cassette tape Use only video cassette tapes marked and . Loading Remove the erase prevention tab with a screwdriver. Cover the hole with a piece of adhesive tape. To record again Screwdriver Automatic tape eject This DVD/VCR will automatically rewind the tape when the tape has ended.
30 Playback (VCR) Cassette tape playback T o play a prerecorded tape. Load a prerecorded tape (When loading a cassette tape without the erase prevention tab, playback will start automatically). Preparation: • T urn ON the TV and select the corresponding video input.
31 Playback (VCR) Special playback Picture search Reverse picture search function Press REW once or twice during playback. Forward picture search function Press FWD once or twice during playback. To return to playback, press PLAY . Press PAUSE during playback.
32 Playback (VCR) Con v enience function T o cancel repeat mode : Follow the above step 1 , then press ENTER to select “OFF” position. Press VCR MENU to return to the TV . Press VCR MENU. Press SET + or – to select “AUTO REPEA T”. 1 Press ENTER to select “ON” or “OFF”.
33 Playback (VCR) This function enables you to locate the beginning of any recording made on the VCR. Recording an INDEX mark The Index Search function auto- matically records an INDEX mark on the tape whenever a recording is initiated. Index search Press INDEX + or – during stop or play mode.
34 Recording (VCR) Recording a TV program Recording and viewing the same TV program. Recording a TV program Load a cassette tape with the erase prevention tab intact. The DVD/VCR will automatically turn on. 1 00 : 00 : 00 SP CH 110 CH 110 INDEX Press SP/SLP to select the desired tape speed SP or SLP .
35 Recording (VCR) Recording one program while watching another Press STOP to stop recording. “ ” will appear on screen for about 4 seconds. Press PAUSE/STILL to avoid recording unwanted material. Press again to continue the recording. “ ” will appear on screen for about 4 seconds.
36 Recording (VCR) One-touch T imer Recording (O TR) The One-touch T imer Recording feature provides a simple and convenient way to make a timed recording.
37 Recording (VCR) T imer recording T imer recording can be programmed on-screen with the remote control. The built-in timer allows automatic unattended recording of up to 8 programs within 1 month. T imer recording Notes: • Press CANCEL to move cursor backward for correction.
38 Recording (VCR) Setting procedure T o set daily/weekly timer T o confirm Timer program: At step 1 on the previous page select “TIMER REC SET” and press ENTER .
39 Other functions (VCR) Ster eo recording and playback / Second A udio Program (SAP) When a MTS STEREO broad- cast is received, “STEREO” will appear on the screen for about 4 seconds and the program can be viewed or recorded in stereo. The Hi-Fi stereo recording pro- cedure is the same as for normal recordings.
40 Other functions (VCR) T o AUDIO (L) OUT AUDIO/VIDEO cable (supplied) Playback VCR T o VIDEO OUT T o AUDIO (R) OUT Recording VCR T o AUDIO (L) IN T o VIDEO IN T o AUDIO (R) IN Duplicating a video tape If you connect the DVD/VCR to another VCR or Camcorder , you can duplicate a previously recorded tape.
41 Other functions (VCR) Press REC to start recording. The DVD/VCR will change to the VCR mode automatically and the playback picture or sound will be duplicated on the video cassette tape. Recor ding a D VD/CD disc Y ou can record disc material in DVD, Audio CD, etc.
42 Basic playback (DVD) Press OPEN/CLOSE or PLA Y on the unit. The disc tray closes automatically . On the TV -screen, “ ” changes to “Reading” and then playback commences. • A menu screen will appear on the TV screen, if the disc has a menu feature.
43 Basic playback (DVD) T o pause playback (still mode) Press P AUSE/STILL during playback. T o resume normal playback, press the PLA Y button. • The sound is muted during still mode. T o stop playback Press STOP . T o remove the disc Press OPEN/CLOSE .
44 Basic playback (DVD) INDE X SKIP – Playback starts from the beginning of the current chapter or track. When you press twice in quick successions, playback starts from the beginning of the preceding chapter or track. Press SKIP or repeatedly to display the chapter or track number you want.
45 Advanced playback (DVD) Press STOP to end playback. • The unit records the stopped point. “ ” appears on the screen. Press PLAY to resume playback (from the scene point). • If you press STOP again or unload the disc, the unit will clear the stopped point.
46 MP3/WMA/JPEG playback (continued) You can select your desired JPEG file on the file menu and picture menu. The selected JPEG file is automatically adjusted to the TV screen. (When the aspect ratio of the JPEG file is different to your TV screen, the black bar will appear at the top and bottom, or the both sides of the TV screen.
47 Advanced playback (DVD) Setting the JPEG Interval 1 Press SETUP in the stop mode. Press or to select “Picture”, then press ENTER. Press or to select “JPEG Interval”. Press ENTER or / to select your desired time. Off: Plays back one file at a time.
48 Setting the Select Files 1 Press SETUP in the stop mode. Press or to select “Picture”, then press ENTER. Press or to select “Select Files”. Press ENTER or / to select your desired file type. All: Displays all files. Music Only: Displays only MP3/WMA files.
49 Advanced playback (DVD) Zooming (JPEG CD) Press ZOOM during playback. Enlarged JPEG images are displayed. You can make the images even larger by repeatedly pressing ZOOM . 1 Changing angles (JPEG CD) ANGLE ZOOM C D This unit will allow you to zoom in on the JPEG image.
50 Zooming 1 2 Press ZOOM during playback. The centre part of the image will be zoomed in. Each press of ZOOM will change the ZOOM 1 (x 1.3), 2 (x 1.5) and 3 (x 2.0). ▲ / ▼ / / Zooming/Locating desired scene Advanced playback (DVD) D VD V CD This unit will allow you to zoom in on the frame image.
51 Advanced playback (DVD) Marking the Scenes Returning to the Scenes 1 Press MARKER during playback. Select the blank Marker using or . Then press ENTER at the desired scene. • Repeat this procedure to set the other 2 scenes. Press MARKER to remove this display.
52 Repeat playback of T itle, Chapter and T rack 1 Press PLAY MODE during playback or stop mode. DVD Press / or ENTER once or twice to select “Chapter” or “Title”. ENTER ▼ / / Repea t playback/A-B Repeat playbac k CD/VCD Press to select “Repeat”.
53 Advanced playback (DVD) Program Playback Press PLAY MODE in the stop mode. Press or to select Play Mode, then press / or ENTER to select “Program”. Press / or / to select the programming position. Use Numbered buttons (0-9) to input the Track numbers.
54 Press TOP MENU during playback. Title menu appears on the screen. Press / or / to select the desired title. Chang ing angles/T itle selection/D VD menu Changing Angles Press ANGLE during playback.
55 Function setup (DVD) During disc playback press AUDIO. Press or to select “On”. 1 Changing soundtrack language 1 2 Press AUDIO during playback. The current soundtrack language will appear. Press AUDIO repeatedly until the desired lan- guage is selected.
56 During DVD KARAOKE disc playback, press AUDIO. 2 On : The primary vocal is output when it is recorded on the disc. Off : The primary vocal is not output. Press or to select “On” or “Off”. Function setup (DVD) Setting subtitles/Karaok e playback T urning the subtitles on and off Press SUBTITLE during playback until “Off” appears.
57 Function setup (DVD) Press SETUP in the stop mode or No Disc. Press or to select “Picture”. Press or ENTER, then press or to select “Tv Screen”.
58 0 0: 3 4 : 56 0 1 :1 2 : 33 00 : 3 4: 5 6 0 1 :1 2 : 33 1 /9 T it l e 1 / 99 1 /8 1 /3 2 C ha p t e r 1/ 9 9 9 E ng D o l by D i gi t a l E ng Each press of DISPLA Y , the status display of the disc will appear on the screen and change as follows. DVD T o make status display disappear, press DISPLA Y again.
59 Function setup (DVD) Dynamic Range Control Press SETUP in the stop mode. Press or to select “Sound”. Press or ENTER to select “DRC”. Press or ENTER, then press or to select desired setting. 1 T o make SETUP screen disappear , press SETUP or RETURN while the SETUP screen is being displayed.
60 P ar ental control setting Some discs are specified not suitable for children. Such discs can be limited not to play back with the unit. Parental control setting Press SETUP in the stop mode or No Disc. Press or to select “Parental”. Then press or ENTER.
61 Function setup (DVD) T o change the parental level 1 2 Press SETUP in the stop mode or No Disc. Press or to select “Parental”. Then press or ENTER. Press number buttons (0-9) to enter the password you have stored. Press ENTER. The rating is now unlocked.
62 T emporar y disabling of rating le v el by D VD disc Depending on the DVD disc, the disc may try to temporarily cancel the rating level that you have set. It is up to you to decide whether to cancel the rating level or not. T emporary disabling of rating level by DVD disc Load a DVD disc and press PLAY or OPEN/ CLOSE on the unit (see page 42).
63 Function setup (DVD) Setting setup language Press VCR DVD selector to select the DVD mode. “Reading” changes to “No Disc”. (If DVD disc has already loaded, the playback will start automatically.) Press SETUP in the stop mode. Press or to select “Other”.
64 Function setup (DVD) Setting menu language 1 Press SETUP in the stop mode or No Disc. Press or to select “Language”. Press or ENTER, then press or to select “Menu”. Press or ENTER. Press or to select your desired language, then press ENTER.
65 Function setup (DVD) Changing subtitle language 1 Press SETUP in the stop mode or No Disc. Press or to select “Language”. Press or ENTER, then press or to select “Subtitle”. Press or ENTER. Press or to select your desired language, then press ENTER.
66 Setting audio soundtrack language Press SETUP in the stop mode or No Disc. Press or to select “Language”. Press or ENTER, then press or to select “Audio”. Press or ENTER. Press or to select your desired Audio Language, then press ENTER. English, Francais, Espanol: The language you have selected will play if it is recorded on the disc.
67 Others Language code list Enter the appropriate code number for the initial settings “Menu”, “Subtitle” and/or “Audio” (see pages 64-66).
68 Others Befor e calling service personnel Check the following guide for the possible cause of a problem before contacting service. SYMPTOMS POSSIBLE SOLUTIONS • Make sure the power cord is plugged in. • Try another AC outlet. • Power is off, check fuse or circuit breaker.
69 Others AC 120 V 60 Hz Operation: 18 W , Stand by: 2 W 7.9 lbs (3.6 kg) Width: 16-15/16 inches (430 mm) Height: 3-7/8 inches (99 mm) Depth: 9-7/8 inches (251.
70 Others LIMITED W ARRANTY DVD VIDEO PLA YER T oshiba America Consumer Products, Inc. (“T ACP”), T oshiba Hawaii (“THI”) and T oshiba Canada Limited (“TCL”) make the following limited warranties.
71 Others How to Obtain W arranty Service (1) Refer to the troubleshooting guide in your owner ’s manual. This check list may solve your problem. (2) In the U.S.A., only call the T ACP toll free number 800-631-381 1, or if in Hawaii or Canada see listing below within (30) days after you find a defective product or part.
Printed in Thailand 03/08 U 2C51501C (E)p68-BACK 7/10/03, 10:46 AM 72.
デバイスToshiba SD-V291の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toshiba SD-V291をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba SD-V291の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba SD-V291の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba SD-V291で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba SD-V291を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba SD-V291の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba SD-V291に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba SD-V291デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
