ToshibaメーカーT210/ T210D/ T230/ T230Dの使用説明書/サービス説明書
ページ先へ移動 of 166
User ’ s Manual Satellite/Satellite Pro/PORTÉGÉ T210/T210D/T230/T230D Series.
User ’s Manual ii T able of Content s Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . v Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual iii Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Right side . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Back . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual iv Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Chapter 7 HW Setup Accessing HW Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-1 HW Setup window . . . . . . . . . . . . . . . . .
User ’s Manual v Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Copyright © 2010 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA.
User ’s Manual vi Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Memory S tick, Memory S tick Duo, Me mory S tick PRO, Memory S tick PRO Duo and Memory S tick Micro are trade marks or registered trademarks of Sony Corporation. ConfigFree is a trademark of T oshiba Corporation.
User ’s Manual vii Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series 1. This device may not cause harmful interfere nce. 2. This device must accept any interference received, including interference that may cause undesired opera tion. Cont act Address: TOSHIBA America Information Systems, Inc.
User ’s Manual viii Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series For example, the fol lowing environments are not a pproved: ■ Industrial Environments (e.
User ’s Manual ix Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Following information is only valid for EU-mem ber S t ates: Disposal of product s Disposal of batteries a nd/or accumulators Disposing of the computer and the computer's batteries ■ Discard this compu ter in acco rdance with appli cable laws and regulations.
User ’s Manual x Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series REACH - Compliance St atement The new European Union (EU) chemical regulation, REACH (R egistration, Evaluation, Authorization and Restriction of Chemica ls), entered into force on 1 June 2007.
User ’s Manual xi Preface Congratulations on your purchase of the Satellite/Sa tellite Pro/PORTÉGÉ T210/T210D/T230/T 230D Series computer . This powerful noteboo k computer provides excellent expans ion capability , includes mul timedia functionality , and is designed to prov ide years of reliable, hi gh-performance computing.
User ’s Manual xii Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Icons Icons identify ports, dials, and other parts of your computer . The indicator pane l also uses icon s to identify the comp onents it is providing in formation on.
User ’s Manual xiii Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series T erminology This term is defined in this document as follows: Star t The word " Sta rt " refers to the " " button in Windows 7.
User ’s Manual xiv General Precautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . Ho we ver , cert ain precautions should be observed to further reduce the risk of personal injury or damag e to the computer .
User ’s Manual xv Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Creating a computer-friendly environm ent Place the computer on a flat surface that is large enough for the computer and any ot her items yo u are usin g, such as a printer .
User ’s Manual xvi Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series Pressure or imp act damage Do not apply heavy pressure to the com puter or subject it to any form of strong impact as this can damage the computer's compone nts or otherwise cause it to malfuncti on.
User ’s Manual 1-1 Chapter 1 Getting S t arted This chapter provides an equ ipment checklist, and basic informa tion to start using your computer . Equipment checklist Carefully unpack your comp uter , taking care to save the box and packaging materials for future use.
User ’s Manual 1-2 Getting S tarted Sof tware The following Wi ndows ® operating system and ut ility sof tware are preinstalled. ■ Windows ® 7 ■ TOSHIBA V alue Added Package ■ TOSHIBA Recove.
User ’s Manual 1-3 Getting S tarted Getting St arted This section provides basic information to start using your computer . It covers the following topics: ■ Connecting the AC adaptor ■ Opening .
User ’s Manual 1-4 Getting S tarted Connecting the A C adaptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power .
User ’s Manual 1-5 Getting S tarted 1. Connect the power cord to the AC adaptor . Figure 1-1 Connecting the power cord to the AC adap tor (2-pin plug) Figure 1-2 Connecting the power cord to the AC adap tor (3-pin plug) 2. Connect the AC adaptor ’s DC output plug to the DC IN 19V jack on the left side of the computer .
User ’s Manual 1-6 Getting S tarted Opening the disp lay The display panel can be opened to a wide range of angles for optimal viewing. While holding down the palm rest with one hand so that the mai.
User ’s Manual 1-7 Getting S tarted T urning on the power This section describes how to turn on the power - the Power indicator will then indicate the status. Please refer to the Monitoring of power condition section in Chapter 6, Power and Powe r-Up Modes fo r more information.
User ’s Manual 1-8 Getting S tarted T urning off the power The power can be turned off in one of three modes, either Shut Down Mode, Hibernation Mode or Sleep Mode.
User ’s Manual 1-9 Getting S tarted Benefits of Sleep Mode The Sleep Mode feature provide s the following benefits: ■ Restores the previous workin g environment more ra pidly than does the Hibernation Mode feature.
User ’s Manual 1-10 Getting S tarted When you turn the power back on, you can continue where you left when you shut down the computer . Sleep Mode limitations Sleep Mode will not function under the following conditions: ■ Power is turned back on immediately after shutting down.
User ’s Manual 1-1 1 Getting S tarted S tarting Hibernation Mode T o enter Hibernation Mode, follow the steps below . 1. Click Start . 2. Point to the arro w icon ( ) and then select Hibernate from the menu.
User ’s Manual 1-12 Getting S tarted ■ Press the power button and hold it do wn for five seconds. Once the computer has turned itself off, wait between ten and fifteen seconds before turning the power on again by pressing the power button.
User ’s Manual 1-13 Getting S tarted System Recovery This section describes the creation of Recovery Media an d their use. Creating Recovery Media This section describes how to crea te Recovery Media.
User ’s Manual 1-14 Getting S tarted 5. After Recovery Media Creator starts , select the type of media and the title you wish to copy , and then click the Create button. Restoring the pre installe d sof tware from th e Recovery hard d isk drive A portion of the total hard disk dr ive space is configured as a hidden recovery partition.
User ’s Manual 1-15 Getting S tarted Restoring the prein sta lled sof tware from yo ur created Recovery Media If the prein stalled files are damaged , you are able to either use the Recovery Media you have created or the hard disk drive recovery process to restore the computer to the state it was in when you originally received it.
User ’s Manual 2-1 Chapter 2 The Grand T our This chapter identifies the various co mponen ts of the computer - it is recommended that you beco me famili ar with each before you operate the computer . Front with the display closed The following fig ure shows the computer ’ s front with its display panel in th e closed position.
User ’s Manual 2-2 The Grand T our Lef t side The following figure shows the comp uter ’s left side. Figure 2-2 The left side of the computer (Satellite/Satellite Pr o/PORTÉGÉ T210/T210D) 1. DC IN 19V jack 4. eSA T A/USB combo por t 2. Cooling vents 5.
User ’s Manual 2-3 The Grand T our Right side The following figure shows the comp uter ’s right side. Figure 2-3 The right side of the computer (Satellite/Satellite Pr o/PORTÉGÉ T210/T210D) Keep foreign metal objects, such as scr ews, staples and paper clips, out of the eSA T A/U SB combo port.
User ’s Manual 2-4 The Grand T our Back The following figure shows the computer ’s back. Figure 2-4 The back of the computer (Satellite/Satellite Pro/PORTÉGÉ T210/T210D) Microphone j ack A 3.5 mm mini microphone jack enable s connection of a three-conductor mini jack for monaural microphone input.
User ’s Manual 2-5 The Grand T our Underside The following figure shows the undersi de of the computer . Y ou shou ld ensure that the disp lay is closed befo re the computer is turned over to avoid causing any damage.
User ’s Manual 2-6 The Grand T our Front with the display op en This section shows the computer with the display panel open. In order to open the display , lif t the display panel up and position it at a comfortable viewing angle for you.
User ’s Manual 2-7 The Grand T our Figure 2-8 The front of the computer with th e display panel open (Satellite/Satellite Pr o/PORTÉGÉ T230/T230D) * Provided with some models. Product appearance depends on the model you purchased. 1. Wireless LAN and Wireless W AN antennas (not shown)* 7.
User ’s Manual 2-8 The Grand T our Web Camera Web Camera is a device that allows you to record video or take photographs with you r computer . Y ou can use it for video chatting or video conferences using a communication tool such as Windows Live Messenge r .
User ’s Manual 2-9 The Grand T our Indicators This section explains ind icator functions. System indica tors LED system indicators next to their resp ective icons, glow when specific computer operations are in progress.
User ’s Manual 2-10 The Grand T our DC IN The DC IN indicator normally glows white when power is being correctly supplied from the AC power adaptor . However , If the outpu t voltage from the adaptor is abnorm al, or if the computer' s power supply malfunctions, this indi cator will flash amber .
User ’s Manual 2-1 1 The Grand T our Keyboard indicators The following figures show the position of the C APS LOCK indicator which show the following conditi ons: ■ When the CAPS LOCK indica tor glows, the keyb oard will produce capitals when any letter is typed.
User ’s Manual 2-12 The Grand T our AC adaptor The AC adaptor can automa tically adjust to any voltage ranging from 100 to 240 volts and to a freque ncy of either 50 o r 60 hertz, enablin g you to use this computer in almost all country/ region. The adaptor converts AC power to DC power and re duces the voltage supplied to this computer .
User ’s Manual 3-1 Chapter 3 Hardware, Utilities and Options Hardware This section describes the hardware of your computer . The actual specifications ma y vary depending on the model you purchased. Processor CPU Y our co mputer is equipped with one processor and processor type varies depending on model.
User ’s Manual 3-2 Hardware, Utilities and Options Memory Power Memory slots 1 GB, 2 GB or 4 GB memory modules can be installed in the computer's two memory slots for a maximum of 8 GB system memory . This computer can be equipped with memory modules of a maximum size of 8 GB.
User ’s Manual 3-3 Hardware, Utilities and Options Disks Legal Footnote (Battery Life) For more information regarding Batter y Life, please refer to the Legal Footnotes section in Appendix G . RTC battery The internal RTC battery backs up the Real T ime Clock (RTC) and calendar .
User ’s Manual 3-4 Hardware, Utilities and Options Display The computer's internal disp lay panel supports high-resolution video graphics and can be se t to a wide ran ge of viewing angl es for maximum comfort and readability .
User ’s Manual 3-5 Hardware, Utilities and Options 2. Select On battery from the drop-down menu in Graphics Power Plan Settings and then select the Display Power Saving T echnolog y check box. If you want to improve the picture quality under the conditions mentioned above, adjust the setting towards Maximum Qual ity or disable this feature.
User ’s Manual 3-6 Hardware, Utilities and Options Sound Multimedia Communications Legal Footnote (LCD) For more information regarding the LCD, please refer to the Legal Footnotes section in Appendix G . Graphics controlle r The graphics controller maximizes display performance.
User ’s Manual 3-7 Hardware, Utilities and Options Wireless LAN Some computers in this series are equipped wi th a Wireless LAN module that is compatible with other wireless LAN systems based on Direct Sequence S pread S pectrum/Orthogonal Frequency Division Multiplexing ra dio technology that complies with the IEEE 802.
User ’s Manual 3-8 Hardware, Utilities and Options Sp ecial features The following features are eithe r un ique to TOSHIBA computers or are advanced features which ma ke the computer more con venient to use. Access each function using the following proce dures.
User ’s Manual 3-9 Hardware, Utilities and Options Battery save mode *1 This feature lets you configure the compute r in order to save battery power .
User ’s Manual 3-10 Hardware, Utilities and Options Hibernation Mod e This feature lets you tu rn off the power to the computer without e xiting fro m your software. The contents of main memory are automatically saved to the hard disk drive so that when you next turn the power o n again, you can continue working right where you left off.
User ’s Manual 3-1 1 Hardware, Utilities and Options Utilities and Applications This section describes the preinstalled utilities that come with the co mputer and details how to start them. For further info rmation on their operation, you may refer to each utility's online manual, help files or README.
User ’s Manual 3-12 Hardware, Utilities and Options TOSHIBA Face Recognition TOSHIBA Face Recognition uses a face verification library to ve rify the face da ta of users when they log in to Win dows. If the verification is successful, the user will be logged into Windows automatica lly .
User ’s Manual 3-13 Hardware, Utilities and Options TOSHIBA Disc Creator Y o u can create CDs and DVDs in a number of formats including audio CDs that can be played on a standard CD player , and da ta CDs/DVDs which can store copie s of the files and fo lders on your computer's hard disk drive.
User ’s Manual 3-14 Hardware, Utilities and Options Optional devices Optional devices can expand the computer's capabilities and its versatility .
User ’s Manual 3-15 Hardware, Utilities and Options Peripheral devices ■ External monitor ■ eSA T A device Other ■ Security lock Bridge med ia slot The computer is equipped with a Bri dge medi.
User ’s Manual 3-16 Hardware, Utilities and Options Memory media This section provides the important safety precautions in order to handle your memory media.
User ’s Manual 3-17 Hardware, Utilities and Options Media care Observe the following preca utions when handling the card. Card care ■ Do not twist or be nd cards. ■ Do not expose cards to liquids or store in humi d areas or lay media close to containers of liquid.
User ’s Manual 3-18 Hardware, Utilities and Options 3. Press the memory media gently to ensure a firm connection is made . Figure 3-2 Inserting a memory media (Satellite/Satellite Pr o/PORTÉGÉ T210/T210D) Remo vin g a me mor y med ia The following instru ctions apply to all types of supported media device s.
User ’s Manual 3-19 Hardware, Utilities and Options 4. Grasp the media and remove it. Figure 3-3 Removing a memory media (Satellite/Satellite Pr o/PORTÉGÉ T210/T210D) Additional mem ory modu le Y ou can install additional memory into th e computer in order to increase the amount of system memory that is avai lable.
User ’s Manual 3-20 Hardware, Utilities and Options Installing a memory module T o install a memory module, follow the steps as detailed below: 1. Shut down the compu ter - make su re the Power indicator is off (refer to the T urning off the pow er section in Chapter 1, Getting S tarted if required).
User ’s Manual 3-21 Hardware, Utilities and Options Figure 3-5 Removing the memory module cover (Satellite/Satellite Pr o/PORTÉGÉ T230/T230D) 7. Align the notch of the memory modul e with that of .
User ’s Manual 3-22 Hardware, Utilities and Options Figure 3-7 Seating the memory module (Satellite/Satellite Pr o/PORTÉGÉ T230/T230D) 8. Seat the memory module cover in place and secure it with the screw. 1. Notch 3. Slot B 2. Slot A 1 2 2 3 1 ■ Never allow metal objects, such as screws, staples and p aper clips, to enter the computer.
User ’s Manual 3-23 Hardware, Utilities and Options Figure 3-8 Seating the memory module cover (Satellite/Satellite Pr o/PORTÉGÉ T210/T210D) Figure 3-9 Seating the memory module cover (Satellite/Satellite Pr o/PORTÉGÉ T230/T230D) 9.
User ’s Manual 3-24 Hardware, Utilities and Options 6. Slide your fingernail or a thin object under the cover and lift it off. 7. Push the latches away from the module in order to release it - a spring will force one end of the modul e up at an angle.
User ’s Manual 3-25 Hardware, Utilities and Options 9. Seat the memory module cover in place and secure it with the screw . 10. Install the battery pa ck - refer to Replacing the battery pack section in Chapter 6, Power and Powe r-Up Modes, if required.
User ’s Manual 3-26 Hardware, Utilities and Options At that time, please read the manual of the monitor and set the display mode which is supporting at the monitor .
User ’s Manual 3-27 Hardware, Utilities and Options Disconnecting an eSA T A device When you have finished using an eSA T A de vice, you can follow the procedures below in order to disconnect it: 1. W ait for th e indicator lig ht of an eSA T A device to go out to make sure all activity has stopped.
User ’s Manual 3-28 Hardware, Utilities and Options Settings for disp lay video on HDMI T o view video on the HDMI device, be sure to configure th e following settings otherwise you may find that nothing is displayed. Select HD Format T o select the display mode, follow the steps as detailed below: 1.
User ’s Manual 3-29 Hardware, Utilities and Options Security lock A security locks enable you to ancho r your computer a desk or other heavy object in order to help prevent unautho rized removal or theft.
User ’s Manual 3-30 Hardware, Utilities and Options Optional accessories Y ou are able to add a number of options and accessories in orde r to make your computer even more powerful and convenient to use .
User ’s Manual 4-1 Chapter 4 Operating Basics This chapter describes the basic operations of your computer , highlights the precautions that should be taken when using it. Using the T ouch Pad T o use the T ouch Pad, simply touch and move your fingertip across it in the direction you want the on-screen pointer to go.
User ’s Manual 4-2 Operating Basics T ouch Pad Gesture Please refer to the touch pad settings in mouse properties. We b Ca me r a Web Camera is a device that allows you to record video or take photographs with your compute r . Y ou can use it for video chatting or video conferences using a communication tool such as Windows Live Messenger .
User ’s Manual 4-3 Operating Basics Using the T OSHIBA Face Recognition TOSHIBA Face Recognition uses a face verificati on library to verify the face data of users when they log in to Windows. The user can thus avoid having to enter a password or the like, which makes the login process easier .
User ’s Manual 4-4 Operating Basics TOSHIBA, ITS AFFILIA TES A ND SUPPLIERS SHALL HA VE NO RESPONSIBILITY FOR DAMAGE T O OR LOSS OF ANY BUSINESS, PROFITS, PROGRAMS, DA T A, NE TWORK SYSTEMS OR REMOV ABLE STORAGE MEDIA ARISING OUT OF OR RESUL TING FROM THE USE OF THE PRODUCT , EVEN IF AD VISED OF THE POSSIBILITY THEREOF .
User ’s Manual 4-5 Operating Basics 8. If verification is successful, click the Next button and register an account. 9. Register the account. Fill in all the fields. 10. The Managemen t screen is displayed. The registered account name wi ll be displayed.
User ’s Manual 4-6 Operating Basics 5. V erification will be performed. If the authentication is successful, the image data taken in step 4 will be faded in and placed over one another . ■ If an error occurs during authentication, you will be returned to the Select Tiles screen.
User ’s Manual 4-7 Operating Basics ■ Y ou ca nnot back up CD-ROM, CD-R or CD-RW media to DVD+R, DVD+R (Double Layer) or DVD+RW media using the "Disc Backup" function of T OSHIBA Disc Creator .
User ’s Manual 4-8 Operating Basics How to learn more about TOSHIBA Disc Creator Please refer to the Help files for additional TOSHIBA Disc Creator information. Sound System This section describes some of the audio control functions. Adjusting System V olume Y ou can control the o verall level of sound using Windows Volume Mixer .
User ’s Manual 4-9 Operating Basics Audio Enhancement s In order to apply the soun d effects for your current speaker , follow the steps below . 1. Right click on the speaker icon on the T askbar , and select Playb ack devices from the su b menu. 2.
User ’s Manual 4-10 Operating Basics Microphone Ef fects Microphone Effect s are only found within Micropho ne window . ■ Noise Suppression reduces background noise and fa n noise. ■ Acoustic Echo Cancellation reduces feedback and feedback echo.
User ’s Manual 4-1 1 Operating Basics Wireless com munications The computer ’s wireless communication function supports some wireless communication devi ces.
User ’s Manual 4-12 Operating Basics Setting 1. Please make sure that the Wireless Communi cation function is on. 2. Click Start -> Control Panel -> Netw ork and Internet -> Network and Sharing Center . 3. Click Set up a new connecti on or network .
User ’s Manual 4-13 Operating Basics Security T wo advanced security mechanisms ensure a high le vel of security: ■ Authentication prevents access to critical data and makes it impossible to falsify the origin of a message. ■ Encryption prevents eavesdropping and maintains link privacy .
User ’s Manual 4-14 Operating Basics Wireless communica tion Indicator The wireless communication indicator shows the status of the computer's wireless com munication fu nctions.
User ’s Manual 4-15 Operating Basics Connecting the LAN cable T o connect the LAN cable, foll ow the steps as detailed below: 1. T urn off the power to the computer and to all external devices connected to the computer . 2. Plug one end of the cable into t he LAN jack.
User ’s Manual 4-16 Operating Basics Computer Ha ndling This section explains computer han dling and maintenance. Cleaning the compu ter T o help ensure long, trouble-free o per ation, keep the computer free of dust and dirt, and u se care with a ll liquids arou nd it.
User ’s Manual 4-17 Operating Basics ■ Never transport your computer with any cards in stalled - this may cause damage to either the computer and/o r the card resulting in prod uct failure. ■ Always use a suitable carry case when transporting th e computer .
User ’s Manual 4-18 Operating Basics TOSHIBA HDD Protection Properties Y ou can change the TOSHIBA HDD Protection settings by using the TOSHIBA HDD Protection Properties window . T o open the window , click Star t -> All Programs -> TOS HI BA -> Utilities -> HDD Protection Settings .
User ’s Manual 4-19 Operating Basics Det ails T o open the Details window , click the Setup Det ail button in the TOSHIBA HDD Protection Properties window .
User ’s Manual 4-20 Operating Basics St arting the Sleep Utility T o start the utility , click Start -> All Programs -> TO S HIB A -> Utilities -> Sleep Utility . Enabling Sleep and Charge This utility can be used to enable and disab le the USB Sleep and Charge function.
User ’s Manual 4-21 Operating Basics Power supply mod e settings Y our PC has multiple charging modes so th at many different USB devi ces can be supported for USB Sleep and Charge function. T ypical Mode (Default) is suitable for a wide range of digital audio players.
User ’s Manual 5-1 Chapter 5 The Keyboard The computer ’s keyboard layouts ar e compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhance d keyboard functions can be performed on the computer .
User ’s Manual 5-2 The Keyboard Function keys: F1 … F12 The function keys (not to be confused with the special FN key) are the twelve keys at the top of your key board - these keys function differentl y from other keys.
User ’s Manual 5-3 The Keyboard The FN key can be combi ned with the following keys to simulate functions similar to those of keys on the 104/105 key enhanced keyb oard which are not on this computer's keyboard. Press FN + F10 or FN + F1 1 to access the computer's integrated keypad.
User ’s Manual 5-4 The Keyboard Sleep : Pressing FN + F3 switches the system to Sleep Mode. Hibernate : Pressing FN + F4 switches the system to Hibernation Mode. Output : Pressing FN + F5 changes the active display devi ce. Brightness Down : Pressing FN + F6 decreases the computer's display panel brightness in individual steps.
User ’s Manual 5-5 The Keyboard TOSHIBA Zooming Utility (reduce): Pressing FN + 1 reduces the icon size on the desktop or the font sizes wi thin one of the supported applica tion windows. TOSHIBA Zooming Utility (enlarge): Pressing FN + 2 enlarges the icon size on the desktop or the font sizes wi thin one of the supported applica tion windows.
User ’s Manual 5-6 The Keyboard Keyp ad overlay Y our computer's keybo ard may not have a separa te numeric keyp ad but includes a numeric keypad overlay which functions like one - this is located in the center of the keyb oard with the relevant keys havi ng grey letters at their front edge.
User ’s Manual 5-7 The Keyboard Figure 5-3 The numeric keypad overlay (Satellite/Satellite Pr o/PORTÉGÉ T230/T230D) T emporarily using normal keyboard (overlay on) While using the overlay , you can te mporarily access the normal keyboard functions without having to turn the overlay off: 1.
User ’s Manual 5-8 The Keyboard Generating ASCII charact ers Not all ASCII characters can be generated using norma l keyboard operation, but you are a ble to generate the se characters using their specific ASCII codes. 1. Hold down AL T with the overl ay on or AL T + FN with overlay off.
User ’s Manual 6-1 Chapter 6 Power and Power-Up Modes The computer's p ower resources in clude the AC ad aptor , battery pack and any internal batteries.
User ’s Manual 6-2 Power and Power-Up Modes T able 6-1 Power conditions continued Monitoring of power condition As shown in the below table, the Battery , DC IN and Power indicators on the system indicator alert you to the computer ’s operating capability and battery charge status.
User ’s Manual 6-3 Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine t he power status with the AC adaptor connected - the follow ing indi cator conditions shou ld be n.
User ’s Manual 6-4 Power and Power-Up Modes Real Time Clock (RTC) battery The Real Time Clock (RTC) battery provides power fo r the internal real time clock and calendar function and also main tains the system configuration while the computer is turned off.
User ’s Manual 6-5 Power and Power-Up Modes Charging the batteries When the power in the battery pack becomes low , the Battery indicator will flash amber to indicate that only a fe w minutes of battery power remain.
User ’s Manual 6-6 Power and Power-Up Modes Tim e The following table shows the approximate time required to fully charge a discharged battery . Charging ti me (hours) Battery charging notice The ba.
User ’s Manual 6-7 Power and Power-Up Modes Monitoring battery ca p acity Remaining battery power can be monitored using the following methods. ■ Clicking the battery icon on the T askbar ■ Via .
User ’s Manual 6-8 Power and Power-Up Modes Ret aining dat a with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods.
User ’s Manual 6-9 Power and Power-Up Modes This section explains how to remove and install the battery pack, and begins with the removal process which is detailed through the following steps. Removing the battery pa ck T o remove a discharged battery , follow the steps as detailed below: 1.
User ’s Manual 6-10 Power and Power-Up Modes Figure 6-2 Releasing the battery pack (Satellite/Satellite Pro/PORTÉGÉ T230/T230D) Installing the battery pack T o insta ll a battery p ack, follow the steps as det ailed belo w: 1. Insert the battery pack as far as it will go into the computer .
User ’s Manual 6-1 1 Power and Power-Up Modes Figure 6-4 Securing the battery pack (Satellite/Satellite Pr o/PORTÉGÉ T230/T230D) 3. T urn your co mputer over . Password Utility The password utility allows you to mainta in an addi tional level of security and provides two levels of password security: User and Supervisor .
User ’s Manual 6-12 Power and Power-Up Modes Click Star t -> All Programs -> TO SH IB A -> Utilities -> TOSHIBA Assist -> SECURE -> Supervisor password This utility lets you do the following: ■ Register or delete the supervisor password.
User ’s Manual 6-13 Power and Power-Up Modes Panel power on/off Y ou can set up your computer so that power is turned off automatically when you close the display panel, and turned on again when you open it. Please note that this function is only available for Sleep Mode or Hibernation Mode, not for Shut D own Mode.
User ’s Manual 7-1 Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup program to configure your computer , and provides information on settings for various functions. Accessing HW Set up T o run the HW Setup program, cl ick Start -> All Programs -> TO SH IB A -> Utilities -> HWSetup .
User ’s Manual 7-2 HW Setu p Setup This field displays the installed BIOS version , date and EC version . Password This option allows you to set or reset the user password for power on. User Password Lets you register a new password or change/remove an existing password.
User ’s Manual 7-3 HW Setu p Display This tab lets you customize your computer’s display settings for either the internal display or an external monitor . Power On Display This tab allows you to select the display to be used when the computer is started.
User ’s Manual 7-4 HW Setu p Y ou can override the settings and manually select a boot device by pressing one of the following keys while the compute r is booting: * 1 The floppy diskette drive will be used to start the computer when there is a bootable disk contained in the external drive.
User ’s Manual 7-5 HW Setu p LAN Wake-up on LAN This feature lets the comp uter's power be turned on from shutdown when it receives a wake-up p acket (Magic pa cket) from the LAN. Power will be automatically turn ed on when a signal is received from an administrator's computer whic h is connected via a network.
User ’s Manual 7-6 HW Setu p SA T A eSA T A This feature a llows you to set conditions for SA T A. SA T A Interface setting This feature allo ws you to set SA T A interface setting. Enabled Enables the eSA T A port. (Default) Disabled Disables the eSA T A port in orde r to save power .
User ’s Manual 8-1 Chapter 8 T roubleshooting TOSHIBA have designed this computer for durability , ho wever , should problems occur you are able to use the procedures detailed in this chapter to help determi ne the cause.
User ’s Manual 8-2 T roubleshooting ■ Before you attach an external device yo u should first turn the computer off, then when you turn the computer back on again it will recognize the new device.
User ’s Manual 8-3 T roubleshooting Hardware and system checklist This section discusses problems ca used by your computer ’s hardware or attached peripherals.
User ’s Manual 8-4 T roubleshooting Self test While booting up the computer , self te st is executed aut omatically and the TOSHIBA logo is displayed on the screen.
User ’s Manual 8-5 T roubleshooting AC power If you have trouble turning on the comp u ter with the AC adaptor connected you should check the status of the DC IN indicator . Please refer to Chapter 6, Power and Power-Up Modes for further information.
User ’s Manual 8-6 T roubleshooting Battery If you suspect a problem with the battery , you should check the status of the DC IN indicator as well as the Battery indicator . Please refer to Chapter 6, Power and Power-Up Modes for more information on these indicators, together with general battery operation.
User ’s Manual 8-7 T roubleshooting Real Time Clock Password Keyboard Keyboard problems can be caused by the setup and conf iguratio n of the computer - please refer to Chapter 5, The Keyboard for further information. Problem Pro cedure The BIOS setting and system date/time are lost.
User ’s Manual 8-8 T roubleshooting Internal display p a nel Apparent computer's display pane l problems may be related to the computer's setup and configuration - please refer to Chapter 7, HW Setu p , for further information.
User ’s Manual 8-9 T roubleshooting Hard disk drive Memory Cards: SD/SDHC/SDXC/mini SD/microSD Card, Memory Stick/M emory S tick P RO/Mem ory S tick Duo/Me mory S tick PRO Duo/Memory S tick M icro, xD picture card, M ultiMediaCard For further information, please refer to Chapter 3, Hardware, Utilities and Options .
User ’s Manual 8-10 T roubleshooting Pointing device If you are using a USB mouse, you should also refer to both the USB device section in this chapter , and the documentation supplied with your mouse. T ouch Pad Y ou cann ot read a file Check to ensure the req uired file is actually on the Memory Card that is inserted into the computer .
User ’s Manual 8-1 1 T roubleshooting USB mouse The reaction of T ouch pad is either too sensitive or not sensitive enough. Adjust the touch Sensitivity . 1. Click Start -> Control Panel -> Hardware and Sound -> M ouse . 2. Within the Mouse Prope rties window , click the Device Sett ings tab.
User ’s Manual 8-12 T roubleshooting USB device In addition to the information in this section, p lease also refer to the documentation supplied with yo ur USB device. The on-screen pointer moves too fast or too slow In this instance, you should initiall y try changing the speed setting within th e Mouse Control utility .
User ’s Manual 8-13 T roubleshooting USB Sleep and Charge function For more informa tion and settings, please refer to the Using the TOSHIBA Sleep and Charge Function section in Chapter 4, Operating Basics. Problem Pro cedure I cannot use the "USB Sleep and Charge function".
User ’s Manual 8-14 T roubleshooting eSA T A device In addition to the information in th is section, please also refer to the documentation supplied with your eSA T A device. External devices connected to the compatible ports do not work when connected to a compatible port.
User ’s Manual 8-15 T roubleshooting Sound system In addition to the information in this section, p lease also refer to the documentation supplied with your a udio device. External monitor Please also refer to Chapter 3, Hardware, Utilities and Options , and to the documentation supplied with your monitor for further information.
User ’s Manual 8-16 T roubleshooting LAN Press the FN + F5 hot key in order to change the display priority and ensure th at it is not set for the internal display onl y .
User ’s Manual 8-17 T roubleshooting Wireless LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 4, Operating Basics . Bluetooth For further information on Bluetooth wire less communication, please refer to Chapter 4, Operating Basics .
User ’s Manual 8-18 T roubleshooting Recovery Media T OSHIBA support If you require any additional help using your compu ter or if you are having problems operating the computer, you may need to cont act TOSHIBA for additional techni cal assistance.
User ’s Manual 8-19 T roubleshooting Where t o writ e If you are still unable to solve the prob lem and suspect that it is hardware related, write to TOSHIBA at the nearest location listed below: Outside of Europe In Europe Australia TOSHIBA Australia Pty .
User ’s Manual A-1 Appendix A S pecifications This appendix summarizes the computer ’s technical specifications. Physical Dimensions Refer to User Informati on Guide about Size.
User ’s Manual B-1 Appendix B Display Controller and V ideo mode Display controller The display controller in terprets software commands into hardware commands that turn particular parts on the screen on or of f.
User ’s Manual C-1 Appendix C Wireless LAN This appendix is intended to hel p you get your Wireless LAN network up and running, with a mi nimum of parameters. Card S pecifications Form Factor PCI Express Mini Card Compati bility ■ IEEE 802.1 1 S tandard for Wireless LANs ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance.
User ’s Manual C-2 Wireless LAN Radio Characteristics Radio Charact eristics of Wireless LAN modu le may vary according to: ■ Country/region where the product was purcha sed ■ T yp e of product Wireless communication is often subject to local radio regulations.
User ’s Manual C-3 Wireless LAN Supported Freque ncy Sub-bands Subject to the radio regulatio ns that apply in the countries/regions, your Wireless LAN module may support a different set of 5 GHz/2.
User ’s Manual C-4 Wireless LAN ■ In a Wireless LAN Access Point, th e Wireless LAN module will use the factory-set default channel (p ri nted in bold), unless the LAN Administrator selecte d a different channel when configuring the Wireless LAN Access Point device.
User ’s Manual C-5 Wireless LAN *1 Factory-set default channels *2 The channel which can be used depends on th e installed wireless LAN module. And the approved channels on us ing are different at each country or region.
User ’s Manual D-1 Appendix D Bluetooth wireless technology Interoperability Bluetooth Adaptor from TOSHIBA ar e designed to be interoperable with any product with Bluetooth wireless te chnology that is based on F requency Hopping S pread S pectrum (FHSS) radio technology , and is compliant to: ■ Bluetooth S pecification V e r .
User ’s Manual D-2 Bluetooth wireless technology Interoperability Bluetooth w ireless techno logy and your Health The products with Bluetooth wireless te chnology , like other radio devices, emit radio frequency electromagnetic energy .
User ’s Manual D-3 Bluetooth wireless technology Interoperability USA-Federal Communications Commission (FCC) This equipment has been tested and fo und to comply with th e limits for a Class B digital device, pursuant to Part 15 of FCC Rules.
User ’s Manual D-4 Bluetooth wireless technology Interoperability Ta i w a n Using Bluetooth Adaptor from TOSHIBA equipment in Jap an In Japan, the frequency bandwidth of 2,400 - 2,483.
User ’s Manual D-5 Bluetooth wireless technology Interoperability 2. Indication The indication shown below appe ars on this equipment. (1) 2.4 : This equip ment uses a frequency of 2 .4 GHz. (2) FH : This equipment uses FH-SS modulation. (3) 1: The interference range of this equi pment is less than 10 m.
User ’s Manual E-1 Appendix E AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Certification agencies Length: Minimum 1.
User ’s Manual E-2 AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV -F .
User ’s Manual F-1 Appendix F T OSHIBA PC Health Monitor The TOSHIBA PC Health Monitor application proactively monitors a number of system functions such as power consumption, battery health and the system cooling, in forming you of significant system conditions.
User ’s Manual F-2 TOSHIBA PC Health Monitor The TOSHIBA PC Health Monitor software does not extend or modify TOSHIBA's obligations under its st andard limite d warranty in any way . TOSHIBA's st andard limited warranty te rms and limitations apply .
User ’s Manual G-1 Appendix G Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. Non-applicable Icons Certain computer chassis are design ed to accommodate all possible configurations for an entire product se ries.
User ’s Manual G-2 Legal Footnotes ■ use of computer at temperatures out side the range of 5°C to 30°C (41°F to 86°F) or >25°C (77°F) at hi gh altitude (all temperature references are approximate and may vary depending on the specific computer model - please refer to you r computer documentation or visit the T oshiba website at www .
User ’s Manual G-3 Legal Footnotes Battery Life Battery life may vary considerably depend ing on product model, configuration, applications, power ma nagement settings and features utilized, as well as the natural perf ormance variations produced by the design of indi vidual compone nts.
User ’s Manual G-4 Legal Footnotes Wireless LAN The transmission speed over th e wireless LAN and th e distance over which wireless LAN can re ach may vary depen ding on surro unding electromagnetic environment, obstacles, access po int design and configuration, and client design and software/hardware configurati ons.
User ’s Manual Glossa ry-1 Glossary The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference. Abbreviations AC: Alternating current ACPI: Advanced .
User ’s Manual Glossa ry-2 Glossary IDE: integr ated drive electroni cs IEEE: Institute of Electrical and Electronics Engineers I/O: input/ output IRQ: interrupt request KB: kilobyte LAN: local area.
User ’s Manual Index-1 Index A AC adaptor 3-3 DC IN 15V jack 2-2 additional 3-30 connecting 1-4 ASCII characters 5-8 B Battery charging 6-5 extending life 6-8 indicator 2-10, 6-2 monitoring capacity.
User ’s Manual Index-2 Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series FN + F7 (Brightness Up) 5-4 FN + F8 (Wireless) 5-4 FN + F9 (Touch Pad) 5-4 FN + space (Zoo m) 5-4 Function keys.
User ’s Manual Index-3 Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series P Password Starting the computer by 6-12 power on 3-8 problems 8-7 Pointing Device Touch Pad 8-10 Power Hiberna.
User ’s Manual Index-4 Satellite/Satellite Pro/PORT ÉGÉ T210/T210D/T230/T230D Series W Web Camera 2-8, 3-6, 4-2 Wireless LAN 3-7, 4-11 problems 8-17 Wireless communication 4-11 indicator 2-10, 4-1.
デバイスToshiba T210/ T210D/ T230/ T230Dの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Toshiba T210/ T210D/ T230/ T230Dをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba T210/ T210D/ T230/ T230Dの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba T210/ T210D/ T230/ T230Dの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba T210/ T210D/ T230/ T230Dで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba T210/ T210D/ T230/ T230Dを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba T210/ T210D/ T230/ T230Dの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba T210/ T210D/ T230/ T230Dに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba T210/ T210D/ T230/ T230Dデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。