ToshibaメーカーTRST-A10の使用説明書/サービス説明書
ページ先へ移動 of 32
TOSHIBA REMOT E RECEIPT PRINT ER TRST-A10 SERIES Owner’s Manual.
Personal safety in hand ling or m aintaining the equipm ent is extremely im portant. Warnings and C autions necessary for safe handling are included in this m anual. All warning s and cautions con tained in this manua l should be re ad and understood before handling or maintain ing the equi pment.
If foreign objects (metal fragments, water, liquids) enter the machines, first turn off the power switches and disconnect the power cord plugs from the outlet, and then contact your authorised TOSHIBA TEC representative for assistance. Continued use of the machine in that condition may cause fire or electric shock .
SPAA-207-R1 TABLE OF CONTENTS Page 1. PRODUCT OVERVIEW -------- ---------------------------- ----------- 1-1 1.1 Introduction ---------- ------------------ ---------------------- -- ------------------ ------- 1-1 1.2 Features ---------------- - ------------------ ------------------ ---------------------------- 1-1 1.
1. PRODUCT OVERVIEW 1.1 Introduction 1-1 SPAA-207-R1 1. PRODUCT OVERVIEW 1.1 Introduction Thank you for purchasing the TO SHIBA TRST-A10 Series Thermal Printer. This pr inter is a compact line thermal printer designed to be connected to a TOSHIBA POS terminal or used as a kitchen printer, etc.
1. PRODUCT OVERVIEW 1.3 Applicable Mod e l 1-2 SPAA-207-R1 1.3 App l icable Model Model name descr i ption TRST-A10 - - - RoHS compliance R: RoHS-Compliant model Destination, Country / Region Code QM:.
2. SPECIFICATIONS 2.1 Printer 2-1 SPAA-207-R1 2. SPECIFIC ATIONS 2.1 Printer Item Description Printing method Line thermal do t printing method Printing wid th 80 mm (576 dots) 58 mm (432 dots) Resolution 203.
2. SPECIFICATIONS 2.2 Receipt Roll 2-2 SPAA-207-R1 2.2 Receipt Roll Paper type Thermal paper rolled with the print sid e facing outside W id th (W 1) 80 +/ -1.0 mm W id th (W 2) 58 +0/ -1.0 mm ( W ith optiona l 58 mm paper guide ) Outer diameter (D) 76 +/-2.
3. APPEARANCE 3.1 Front/Rear View 3-1 SPAA-207-R1 3. A PPE ARANCE 3.1 Front/Rear Vie w Front View Rear View 3.2 LED and Feed Button POWER LED (G reen) Lights when th e power is tu rned on. ERROR LED (Blin king Gr een) The Error LED indicates an error by blinking FEED Butto n Used t o feed receipt paper.
3. APPEARANCE 3. 2 LED and Feed Button 3-2 SPAA-207-R1 Error Status T able Green LED Blinking (Slo w ) Problem What to Do Where to Go Receipt paper is low T here are about 4 ½ meters, ± 3 meters, (15 feet, ± 10 feet) of paper left. Change the paper soon to avoid running out of paper part wa y through a transaction .
3. APPEARANCE 3. 3 Connectors 3-3 SPAA-207-R1 3.3 Connectors CAUT I ON! 1. T he drawer inte rface connector is ex clusively for connecting the draw er. Do not connec t a phone line or any other cables than the dr awer cabl e to this connecto r . Doing so may cause a failure of the phone line and this prin ter.
4. SET UP PROCEDURE 4.1 Re q uirements for Op er ation 4-1 SPAA-207-R1 4. SET UP PROCEDURE 4.1 Requirements for Operation This printer has the f ollowin g requirements: Serial Interface Ty pe • The TOSHIBA POS terminal or Personal Computer to be connected must have a serial port.
4. SET UP PROCEDURE 4.1 Re q uirements for Op er ation 4-2 SPAA-207-R1 RS-232C cable pin con f iguration TRST – A15 9 Pin Female 9 Pin Female.
4. SET UP PROCEDURE 4.1 Re q uirements for Op er ation 4-3 SPAA-207-R1 USB cable connector Parallel Interface T ype (Option) IEEE 1284-B receptacl e PIN No. Signal 1 /STROBE 2-9 PD1-8 10 /ACK 11 BUSY 12 PERROR 13 SELECT 14 /AUTOFD 31 /INIT 32 /FAULT 36 /SELECTIN 19-30 GND 15-18 N.
4. SET UP PROCEDURE 4.2 Setting up the Printe r 4-4 SPAA-207-R1 4.2 Setting up the Printer CAUT I ON! 1. Place the printer on a flat, stable sur face. 2. Do not place the prin ter close to a heater or w her e it may be ex posed to direct sunlight. 3. Avoid locations w here the printer may be exposed to high temperature, high humidity or dust.
SPAA-207-R1 5. INST A LL ATION PROCEDURE 5.1 Connecting the Pow er Cord and Interface Cabl e 5-1 5. INST A LL A T I ON PROCEDURE WARNING! 1. Since the power cord and the interface cable are not provided with this unit, please locally purchase ones which meet the specifications.
SPAA-207-R1 5. INST A LL ATION PROCEDURE 5.1 Connecting the Pow er Cord and Interface Cabl e 5-2 5.1 Connecting the Power Cord and Interface Cable CAUT I ON! 1. Be sure to hold the conn ector when plugging in or unplug g ing the AC adapter cabl e. 2. Insert the AC adapte r cable and the pow er cord firmly .
SPAA-207-R1 5. INST A LL ATION PROCEDURE 5.1 Connecting the Pow er Cord and Interface Cabl e 5-3 4) Connect the interface cable to the TOSHIBA POS terminal or Personal Computer, and then plug in the pow er cord to the AC outle t .
5. INST A LL ATION PROCEDURE 5.2 Connecting the Draw er 5-4 SPAA-207-R1 5.2 Connecting the Drawer 1) Turn the printer power OFF. 2) Connect the drawer cable to the drawer inter f ace connector in the correct ori entation.
5. INST A LL ATION PROCEDURE 5.3 Loading the Receip t Roll 5-5 SPAA-207-R1 5.3 Loading the R eceipt Roll W he n you use this printer for t he f irst time or w hen the receipt paper has been use d up, load a receipt roll in the following procedures while the printer power is set to O N.
5. INST A LL ATION PROCEDURE 5.3 Loading the Receip t Roll 5-6 SPAA-207-R1 1) Turn the printer power ON. 2) Hold the raised sides firmly and lift upwards to u nhook the printer cover. (1) 3) Hold both sides of the prin ter cover and open it until it stops.
5. INST A LL ATION PROCEDURE 5.4 Self Test Print 5-7 SPAA-207-R1 5.4 Self Test Print To perform the pr inter self test, use the Mfg Adjustment menu feature. T his f eature prints instructions on the receipt for selectin g any type o f print pattern needed.
5. INST A LL ATION PROCEDURE 5.4 Self Test Print 5-8 SPAA-207-R1 Rolling A S CII print test (Receipt) This option let you run rollin g ASCII printing test. The printer prints the resident character se t in standard pitch contin uously . When Rolling ASC I I Print (Rcpt ) is selected, printer prints the following menu.
5. INST A LL ATION PROCEDURE 5.4 Self Test Print 5-9 SPAA-207-R1 H print test (Rece i pt) This option let you run H printing test . The printer prints the ‘H’ character in standard pitch continuously. When H Print Test (Rcpt) is selected, printer prints the f ollow ing m enu.
5. INST A LL ATION PROCEDURE 5.4 Self Test Print 5-10 SPAA-207-R1 Duty check print test (Receipt) This option let you run duty check printing test. The printer prints t he 12.5%, 25%, 50% and 100% duty original patte r n. W hen Duty Check Print ( Rcpt) is selected, printer prints the following menu.
5. INST A LL ATION PROCEDURE 5.4 Self Test Print 5-11 SPAA-207-R1 Print current setting This option let you print current settin g on receipt. Press the Paper Feed Button to sta r t the test.
6. GENER A L M AINTENANCE 6.1 Cleaning 6-1 SPAA-207-R1 6. GENER A L M A INTEN ANCE WARNING! 1. Be sure to disconnect the power cord prior to performing any maintenan ce. 2. DO NOT POUR W ATER directly onto the printer, as this may cause ele ctric shock or fire.
6. GENER A L M AINTENANCE 6.2 Removing Jammed Pape r 6-2 SPAA-207-R1 6.2 Removing Ja mmed Paper 1. Turn the power OFF. 2. Open the printer cove r. 3. Remove the jammed p aper. D O NOT USE any sha rp implement or tool as these w ill damage the printer.
7. TROUBLESHOOTING 7. Troubleshooting 7-1 SPAA-207-R1 7. TROUBLESHOOTING WARNING! If you cannot solve a proble m with the following solutions, do not attempt to repair it by y o urself. Turn the power off, unplug the pri nter, then contact your au t horized TOSHIBA TEC representative for assistan ce.
SPAA-207-R1 English Waste Rec ycling informat ion for users: Following information is onl y for EU-member states: The crossed out wheeled bin symbol is used to indica te that the product must not be treated as general household waste.
SPAA-207-R1 Italian Informazioni sul riciclo d el prodotto: Le seguenti informazioni riguardan o gli stati membri EU: Il simbolo con il bidone sba rrato indica il non poter smaltire questo prodotto come rifiuto domestico.
E PRINTED IN SINGAPORE SPAA-207-R1 TSM B0039901.
デバイスToshiba TRST-A10の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toshiba TRST-A10をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba TRST-A10の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba TRST-A10の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba TRST-A10で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba TRST-A10を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba TRST-A10の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba TRST-A10に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba TRST-A10デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
