ToshibaメーカーUSB001Zの使用説明書/サービス説明書
ページ先へ移動 of 17
E6581299 c USB-to-Serial Conv ersion Unit Instruction Manual USB001Z Contents 1. Exterior features ・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・・ 4 2.
E6581299 c - 1 - Introduction Thank your for purc hasing a “USB- to-serial c onver sion unit (USB001Z unit) ,” an optional device f or the TO SVERT s eries inverter s. The USB-to-ser ial convers ion unit mak es it pos sible to use a USB port on your com puter as a CO M port for c onnecting it to an inverter f or data co mm unic ations.
E6581299 c - 2 - Read first Safety precautions This instruc tion m anual and the inver ter unit c ontain im portant inform ation to avoid endangering actual operators and other per sons and damaging properties and to ensur e the proper and saf e product usage.
E6581299 c - 3 - Operation s Danger Prohibited Do not apply a dropping shock or other phy sical shoc ks . Otherwise, dam age or m alf unction will result.
E6581299 c - 4 - 1. Exterior features (1) Here are the nam es and f unctions of the exterior c om ponents of the USB001Z unit. (2) Interconnect c ables (No c ables are inc luded with this converter unit.
E6581299 c - 5 - 2. Inst alling the dev ice driv er W hen using the USB001Z unit for the f irst tim e, you have to install its driver on your com puter. Since the steps to be f ollowed to install the driver vary depending on the operation system used, r efer to the sect ion that corres ponds to the operating system used.
E6581299 c - 6 - (3) Inse rt the supplied floppy disk in the floppy disk drive. (4) Spe cify the path to the device dr iver. In the “@Found New Hardware W izard” window, click the chec kbox for “ @Search the bes t driver in these loc ations” clic k the chec kbox for “ @Search r em ovable m edia (floppy, CD-ROM.
E6581299 c - 7 - (6) The installation of the de vice driver is now complete. On com pletion of the installation, the window shown below appears. Then, clic k [F inish]. The f loppy disk is also used in s tep (7), s o do not eject it yet. (7) Then, the installation of the US B port driver star ts.
E6581299 c - 8 - (8) Complete t he installatio n. W hen a window appears, telling y ou that the driver has been installed succ essf ully, click [Finis h] to com plete the installation. Ej ect the floppy disk, put it in its case, and s tore it along with this instruc tion manual.
E6581299 c - 9 - 2.2. Windows 98 SE (1) Turn on y our computer and start Windows. (2) Connect t he USB001Z unit to the co mputer w ith a USB cable. * At this tim e, do not connec t the USB001Z unit to the inverter. After a while, the “@Add New Hardware W izard” appears on the sc reen of your com puter m onitor , as shown in the figure below.
E6581299 c - 10 - (4) Inse rt the supplied floppy disk in the floppy disk drive. After ins erting the floppy disk, clic k the check box for “Floppy disk drives” in the window , mak e sure a check m ark is put in the chec kbox , and then click [Next].
E6581299 c - 11 - (6) The in stallation o f the dev ice driver st arts. On com pletion of the installation, the window shown below appears. Then, clic k [F inish]. Do not eject the f loppy disk y et, because the USB port dr iver will be installed next.
E6581299 c - 12 - 3. Checking the COM port number The CO M port num ber is needed f or com m unications with the inverter. So, follow these steps to check on it. The COM port num ber is r ecognized automatically when the installation of the device driver is com pleted.
E6581299 c - 13 - (3) Click the “ Device manag er” butt on in th e “Hardw are” menu . (4) Click the [+ ] sign on the left si de of “@Port (COM/LPT).” The num ber in parentheses nex t to “USB/Serial Port” refers to the COM port number. (In the exam ple shown below, the COM port num ber is “C OM3.
E6581299 c - 14 - 4. Connecting and st arting the USB001Z unit To c onnect the USB001Z unit to your computer , follow these steps : 1) Turn off the input power to the inverter, and af ter waiting f or at least 15 m inutes, m ak e sure that the charge lam p on the inverter is no longer lit.
E6581299 c - 15 - 5. Outline draw ing Here is an outline drawing of the USB001Z unit. (Unit: m m ).
E6581299 c - 16E - 6. S pecifications Item Specific ations Model number USB001Z Applicable m odel Model with either an RS485 (2-wire type) connector or a comm on s erial connector (optional).
デバイスToshiba USB001Zの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Toshiba USB001Zをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba USB001Zの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba USB001Zの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba USB001Zで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba USB001Zを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba USB001Zの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba USB001Zに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba USB001Zデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。