ToshibaメーカーWIRELESS LAN MODULE GN-1050の使用説明書/サービス説明書
ページ先へ移動 of 60
MULTIFUNCTIONAL DIGITAL SYSTEMS Operator's Manual for Wireless LAN Module GN-1050.
©2008, 2009 TOSHIBA TEC CORPORATION All rig hts reserved Under the copyright laws, this manual ca n not be reproduced in any form without prior written permission of TTEC. No patent li ab ility is assumed, however, with respect to the use of the information contained herein.
Preface 1 Preface Thank you for purchasing TOSHIBA Multifunctional Digi tal Syst ems or Multifunctional Digita l Co lor Systems. This manual explains the instructions for Wireless LAN Module GN-1050. Read this manual before using you r Multifunctional Digital Systems or Multifunctional Digital Color Systems.
2 Prefac e T rademarks y The official name of Windows 2000 is Microsoft Windows 2 000 Operatin g System. y The official name of Windows XP is Microsoft Windows XP Operating System. y The official name of Windows Vista is Microsoft Windows Vista Operating System.
Precautions 3 Precautions Precautions for Use This product is classified as “wireless equipment for st ations of low-power data transmissions systems” under the Wireless T elegraphy Act, and does not require a radio transmission licens e. The law prohibits modification of the interio r of this product.
4 Precautions W ARNING NOTE Do not use the product in the following places: Places near a microwave oven where a magnetic field generates an d places where static electricity or radio interference generates. Depending on en vironment, radio waves can not reach to the product.
Precautions 5 Regulatory Information The TOSHIBA Wireless LAN must be i nstalled and used in st rict accordance with the manu facturer ’s instructions as described in the user documentation that comes with the product. This device comp lies w ith the following ra dio frequency and safety standards.
6 Precautions USA-Federal Communicati ons Commission (FCC) This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of FCC Rules. These l imits are designed to p rovide reasonable protection against harmful interference in a residential installation.
Precautions 7 Regulatory Notice for Channel Use in France The number of channels that can be used for wireless LAN differs from country to country . In France how ever , user onl y 4 channels (channel 10, 1 1, 12, 13) when using wireless networks.
.
CONTENTS 9 CONTENTS Preface ............... ............. ................ ............. ................ ............. ................ ............. .................... 1 Precautions ................. ................ ............. ................
10 CONTENTS.
1. SETTING UP WIRELESS NETWORK This chapter describes about the preparations befor e setting up the wireless setting s of the equipment. Before Setting Up Wireless Network ... .......................................................................... .
1 SETTING UP WIRELESS NETWORK 12 Before Setting Up Wireless Network Before Setting Up Wireless Network This product is a Wireless LAN Module using the 2.4 GHz spectrum diff usi on system, and is compatible with IEEE S tandard 802.1 1g an d 802.1 1b for wireless LAN.
1.SETTING UP WIRELESS NETWORK Before Setting Up Wireless N etwork 13 1 SETTING UP WIRELESS NETWORK Determine the SSID In the wireless network, the same SSID (Ser vice Set ID) must be a ssigned in each wireless device. On ly wireless devices that have the same SSID assigned to them can co mmunicate with each other through the wirele ss network.
1 SETTING UP WIRELESS NETWORK 14 Before Setting Up Wireless Network WEP The WEP is a data encryption method using the WEP ke y between the Access Point a nd other wireless devices. Compared with WP A/WP A2 and WP APSK/WP A2PSK, the WEP is less security .
1 SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 15 Setting Up the Infrastructure Mode The wireless settings can be operated from the Control Panel of this equipment. When setting up the equipment for the wireless network in the Infra structure Mode, follow the steps below .
1 SETTING UP WIRELESS NETWORK 16 Setting Up the Infrastructure Mode 5 Press the [WIRELESS SETTINGS]. The WIRELESS SETTINGS menu is displayed. 6 Press the [WIRELESS SETTINGS]. The WIRELESS SETTINGS screen is displayed. It may take a time to disp lay the WIRELESS SETTINGS screen.
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 17 1 SETTING UP WIRELESS NETWORK 8 Press the [INFRASTRUCTURE] and press the [NEXT]. 9 The SSID SETTINGS screen displayed.
1 SETTING UP WIRELESS NETWORK 18 Setting Up the Infrastructure Mode Specify SSID When you select the Infrastruc ture Mode for the network type, you can specify the SSID by se le cting the available network list or manually entering the SSID. P .
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 19 1 SETTING UP WIRELESS NETWORK 3 Press the [NEXT]. 4 The WIRELESS LAN SECURITY SETTINGS screen is displayed. Continue to the procedure fo r specifying the security mode. P .21 “Select security mode” Entering the SSID manually 1 Press the [SSID].
1 SETTING UP WIRELESS NETWORK 20 Setting Up the Infrastructure Mode 2 Enter the SSID using the keyboard and digit al keys and press the [OK]. The screen returns to the SSID SETTINGS screen. 3 Press the [NEXT]. 4 The WIRELESS LAN SECURITY SETTINGS screen is displayed.
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 21 1 SETTING UP WIRELESS NETWORK Select security mode After specifying the SSID, you must select the security mode for your wireless network. The procedure to configure the security mode varies depend ing on the security mode that you select.
1 SETTING UP WIRELESS NETWORK 22 Setting Up the Infrastructure Mode 2 Press the [EAP-TLS] and press the [NEXT]. The WIRELESS AUTHENTICA TION ( EAP-TLS) screen is displayed. Setting PMK cache When the [WP A2] is selected in step 1, the PMK cache can be switched to ON or OFF .
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 23 1 SETTING UP WIRELESS NETWORK 5 Press the [NEXT]. The WIRELESS AUTHENTICA TION - USER CERTIFICA TION screen is displayed .
1 SETTING UP WIRELESS NETWORK 24 Setting Up the Infrastructure Mode 7 Specify the following ite ms and press the [NEXT]. y ENCODING FORMA T Select the encoding fo rmat of the CA certification file. y [CA CERTIFICA TE] Press this to enter the file name of t he CA certification file that you install in the equipment using T opAccess.
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 25 1 SETTING UP WIRELESS NETWORK 9 Specify the following ite ms and press the [NEXT]. y ENCR YPTION BETWEEN AP AND ST A. Select the encryption type that is used for the co mmunication between Access Point and this equipment.
1 SETTING UP WIRELESS NETWORK 26 Setting Up the Infrastructure Mode 11 Confirm the settings and press the [FINISH]. The shutdown screen is displayed. If you want to change the settings, press the [PREV] to move back to the screen that you want to change and then repeat the operation.
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 27 1 SETTING UP WIRELESS NETWORK Selecting WP A/WP A2 securi ty mode with PEAP protocol Using the WP A/WP A2 with the PEAP protocol, you must install the CA certification f ile in the equipmen t.
1 SETTING UP WIRELESS NETWORK 28 Setting Up the Infrastructure Mode 3 Enter the following items and press the [NEXT] . y [EAP USER NAME] Press this to enter the EAP user name that is used for the authentication. In the EAP USER NAME, enter the user name in “User Name@FQDN” format.
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 29 1 SETTING UP WIRELESS NETWORK 5 Specify the following ite ms and press the [NEXT]. y FULL AGREEMENT of SERVER NAME Select the [ON] to confirm whether th e RADIUS server name in the server ce rtification file and the input RADIUS server name is same or not.
1 SETTING UP WIRELESS NETWORK 30 Setting Up the Infrastructure Mode 7 Specify the following ite ms and press the [NEXT]. y TRANSMIT POWER Select the low transmit power if you wan t to limit the area that the wireless communication is enabled. If you do not have to limit the area, select [100%].
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 31 1 SETTING UP WIRELESS NETWORK Selecting WP APSK/WP A2PSK security mode The WP APSK/WP A2PSK is an auth entication method using the PSK (Pre-Sha red Key) between the Access Point and other wireless devices.
1 SETTING UP WIRELESS NETWORK 32 Setting Up the Infrastructure Mode 3 Specify the following ite ms and press the [NEXT]. y TRANSMIT POWER Select the low transmit power if you wan t to limit the area that the wireless communication is enabled. If you do not have to limit the area, select [100%].
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 33 1 SETTING UP WIRELESS NETWORK Selecting WEP security mode The WEP is a data encryption method using the WEP ke y between the Access Point a nd other wireless devices. Compared with WP A/WP A2 and WP APSK/WP A2PSK, the WEP is less security .
1 SETTING UP WIRELESS NETWORK 34 Setting Up the Infrastructure Mode 3 Specify the following ite ms and press the [NEXT]. y TRANSMIT POWER Select the low transmit power if you want to limit the area that the wirele ss communica tion is enabled. If you do not have to limit the area, select [100%].
1.SETTING UP WIRELESS NETWORK Setting Up the Infrastructure Mode 35 1 SETTING UP WIRELESS NETWORK Selecting no security mode Y ou can also set no secu rity for wireless access. If you do not set no security , anyone how knows the SSID can connect to the wireless network.
1 SETTING UP WIRELESS NETWORK 36 Setting Up the Infrastructure Mode 3 Confirm the settings and press the [FINISH]. The shutdown screen is displayed. If you want to change the settings, press the [PREV] to move back to the screen that you want to change and then repeat the operation.
1 SETTING UP WIRELESS NETWORK Setting up the Ad Hoc Mode 37 Setting up the Ad Hoc Mo de The wireless settings can be operated from the Control Panel of this equipment. When setting up the equipment for the wireless network in the Infra structure Mode, follow the steps below .
1 SETTING UP WIRELESS NETWORK 38 Setting up the Ad Hoc Mode 5 Press the [WIRELESS SETTINGS]. The WIRELESS SETTINGS menu is displayed. 6 Press the [WIRELESS SETTINGS]. The WIRELESS SETTINGS screen is displayed. 7 Press the [ON] and press the [NEXT]. The NETWORK TYPE screen is displayed.
1.SETTING UP WIRELESS NETWORK Setting up the Ad Hoc Mode 39 1 SETTING UP WIRELESS NETWORK 8 Press the [AD HOC] and press the [NEXT]. Y ou can specify the betwee n 1 to 1 1 for the channel. Howe ver , if there is a channel th at has already been used for Ad Hoc network, use the same chann el.
1 SETTING UP WIRELESS NETWORK 40 Setting up the Ad Hoc Mode Specify SSID When you select the Ad Hoc Mode for the netwo rk type, you can specify the SSID by entering the SSID ma nually . If you are not sure how the SSID must be specif ied, see the following section to determine the SSID.
1.SETTING UP WIRELESS NETWORK Setting up the Ad Hoc Mode 41 1 SETTING UP WIRELESS NETWORK 4 The WIRELESS LAN SECURITY SETTINGS screen is displayed. Continue to the procedure fo r specifying the security mode.
1 SETTING UP WIRELESS NETWORK 42 Setting up the Ad Hoc Mode Select security mode After specifying the SSID, you must select the security mode for your wireless network. The procedure to configure the security mode varies depend ing on the security mode that you select.
1.SETTING UP WIRELESS NETWORK Setting up the Ad Hoc Mode 43 1 SETTING UP WIRELESS NETWORK 3 Select the transmit power and press the [NEXT]. Select the low transmit power if you want to limit the area that the wirele ss communica tion is enabled. If you do not have to limit the area, select [100%].
1 SETTING UP WIRELESS NETWORK 44 Setting up the Ad Hoc Mode Selecting no security mode Y ou can also set no secu rity for wireless access. If you do not set no security , anyone how knows the SSID can connect to the wireless network. The refore, it is recommended to set the security if it is possible.
1.SETTING UP WIRELESS NETWORK Setting up the Ad Hoc Mode 45 1 SETTING UP WIRELESS NETWORK 4 Press the [YES] to shut down the equipment. The wireless settin gs apply after restarting the equipment.
1 SETTING UP WIRELESS NETWORK 46 Disabling Wireless Network Disabling Wireless Network When you enable the wireless network, the on-board NIC (Network Interface Card) will be disabled. If you want to connect the equipment to wired network vi a the on-board NIC, you must disable the wireless netwo rk.
1.SETTING UP WIRELESS NETWORK Disabling Wireless Network 47 1 SETTING UP WIRELESS NETWORK 6 Press the [WIRELESS SETTINGS]. The WIRELESS SETTINGS screen is displayed. 7 Press the [OFF] and press the [NEXT]. The NETWORK TYPE screen is displayed. 8 Press the [FINISH].
.
2. APPENDIX This chapter describes the specification and glossary of terms. Specification .......... ............................................................... ......................................... ......... 50 T roubleshooting ..............
2 APPENDIX 50 Specification Specification Item Description T ransmission Format IEEE 1802.1 1g standard Direct Sequence S pread S pectrum (DSSS) Orthogonal Frequency Division Multiplexing (OFDM) Data T ransmission S peed 54, 24, 1 1, 5.5, 2, 1 Mbps (fixed/automatic) Access Method CSMA/CA T ransmission Packet IEEE 802.
2 APPENDIX Troubleshooting 51 T roubleshooting When Error Messages are Dis played If any error messages are displayed on the touch panel, see the followin g table to troubl eshoot the problems for the Wireless LAN. When Cannot Connect to TOSHIBA MFP When you cannot connect to this equipment, reboot it *.
2 APPENDIX 52 Glossary Glossary Ad hoc mode A type of network for wireless LAN comm unications. In this mode a network is easily built because no access point is required.
2.APPENDIX Glossary 53 2 APPENDIX SSID (Service Set ID) A network ID for wireless LAN communications. T o identify termi nals or access points that belong to the same wireless LAN network, the same SSID must be set for each device. Communications among devices with different SSIDs are not available.
.
INDEX 55 INDEX A AD HOC ............... ............. ............. ................ ..........39 Ad Hoc Mode .............. ............. ................ ............. ....12 AES (CCMP) ............... ............. ................ ............. ..
56 INDEX.
GN-1050 OME080038D0.
2-17-2, HIGASHIGOT ANDA, SHINAGA WA-KU, TOKYO, 141-8664, JAP AN MUL TIFUNCTIONAL DIGIT AL S YSTEMS Operator ’s Manual for Wireless LAN Module GN-1050 ©2008, 2009 TOSHIBA TEC CORPORATION All rig hts.
デバイスToshiba WIRELESS LAN MODULE GN-1050の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toshiba WIRELESS LAN MODULE GN-1050をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba WIRELESS LAN MODULE GN-1050の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba WIRELESS LAN MODULE GN-1050の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba WIRELESS LAN MODULE GN-1050で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba WIRELESS LAN MODULE GN-1050を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba WIRELESS LAN MODULE GN-1050の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba WIRELESS LAN MODULE GN-1050に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba WIRELESS LAN MODULE GN-1050デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
