ToshibaメーカーX300の使用説明書/サービス説明書
ページ先へ移動 of 245
User ’ s Manual Qosmio X300 Series.
User ’s Manual ii T able of Content s Copyright. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . vi Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual iii Qosmio X300 Utilities and Applicati ons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-14 Optional accessori es . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-18 Chapter 2 The Grand T our Front with t he display closed .
User ’s Manual iv Qosmio X300 Chapter 5 The Keyboard T ypewriter keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-1 Function keys: F1 … F9 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User ’s Manual v Qosmio X300 Graphics Processor Unit ("GPU”) *6 . . . . . . . . . . . . . . . . . . . . . . . . . 10-3 Wireless LAN *7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-4 Non-applicable Icons *8 .
User ’s Manual vi Qosmio X300 Copyright © 2008 by TOSHIBA Corporation. All rights reserved. Under the copyright laws, this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No p at ent liability is assumed, with respect to the use of the information contained herein.
User ’s Manual vii Qosmio X300 T r ademarks IBM is a registered trademark and IB M PC is a trademark of Internati onal Business Machines Corporation. Intel, Intel S peedS tep, Intel ® Core TM , Celeron and Centrino are trademarks or registered trademarks of In tel Corporation.
User ’s Manual viii Qosmio X300 FCC information FCC notice "Declaration of Conform ity Information" This equipment has been tested and fo und to comply with th e limits for a Class B digital device, pursuant to part 15 of the FCC rules.
User ’s Manual ix Qosmio X300 EU Declar atio n of Confor mity This product and - if applicable - t he supplied accessories too are marke d with "CE" and comply therefore wit h th e applica.
User ’s Manual x Qosmio X300 Modem warning notice Conformity S t atement The equipment has been approved to [Commission Decision “CTR21”] for pan-European single te rminal connectio n to the Public Sw itched T elephone Network (PSTN).
User ’s Manual xi Qosmio X300 Redial Up to two redial atte mpts can be made. If more th an two redial attempts are made, the modem will return Black Listed . If you are experiencing problems with the Black Listed code, set the interval between redials at one minute or longer .
User ’s Manual xii Qosmio X300 Pursuant to FCC CFR 47, Part 68: When you are ready to install or use the modem, call your local telephone company and give them the following information: ■ The tel.
User ’s Manual xiii Qosmio X300 Fax branding The T elephone Consumer Pro tection Act of 1991 makes it unlawful fo r any person to use a computer or other electronic device to send any message via a .
User ’s Manual xiv Qosmio X300 3. The standard connecting arra ngement (telephone jack type) for this equipment is jack type(s): USOC RJ1 1C. The IC registration number of the modem is shown below .
User ’s Manual xv Qosmio X300 Notes for use of this device in New Zealand ■ The grant of a T elepermit for a device in no way indicates T elecom acceptance of responsibility for the correct operation of that device under all operating conditions.
User ’s Manual xvi Qosmio X300 ■ When used in Auto Answer mode, the S0 register must be set with to a value of either 3 or 4. This ensures: ■ a person calling your modem will hear a short burst of ringing before the modem answers. This confirms that the call has been successfully switch ed through the n etwork.
User ’s Manual xvii Qosmio X300 The T elepermit label may also be shown on the packaging of the product and in the sales literature, as require d in PTC 100. The charge for a T elepermit assessment is $337.50. An additional charge of $337.50 is payable w here an asse ssment is based on reports against non-T elecom New Zealand S pecifications.
User ’s Manual xviii Qosmio X300 Panasonic DVD Super Multi drive UJ870 ■ The DVD Super Multi dr ive employs a laser system. T o ensure proper use of this pro duct, please read thi s instruction manual care fully and retain for futu re reference. Should the unit ever require main tenance, co ntact an authorized service location.
User ’s Manual xix Qosmio X300 Pioneer DVD Super Multi drive DVR-TD08TBA/ D VR-TD08TBC ■ The DVD Super Multi dr ive employs a laser system. T o ensure proper use of this pro duct, please read thi s instruction manual care fully and retain for futu re reference.
User ’s Manual xx Qosmio X300 Hitach-LG Dat a S torage DVD Super Multi drive GSA-T50N/ GSA-T50F ■ The DVD Super Multi dr ive employs a laser system. T o ensure proper use of this pro duct, please read thi s instruction manual care fully and retain for futu re reference.
User ’s Manual xxi Qosmio X300 International precautions CAUTION: This appliance contains a laser system and is classified as a “CLASS 1 LASER PRODUCT .” T o use this model properly , read the instruction manual carefully a nd keep this manual for your future reference.
User ’s Manual xxii Qosmio X300 V AROITUS. Suojakoteloa si saa avata. Laite sisältää laserdiodin, joka lähetää näkymätöntä silmilie vaarallist a lasersäteilyä. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED IN THE OWNER’S MANUAL MA Y RESUL T IN HAZARDOUS RADIA TION EXPOSURE.
User ’s Manual xxiii Preface Congratulations on your purchase of the Qosmio X300 series compute r . This powerful notebook computer provides excel lent expansion capability , includes multimedia functionality , and is designed to provide years of reliable, high-performan ce computing.
User ’s Manual xxiv Qosmio X300 Abbreviations On first appearance, and whenever ne ce ssary for clarity , abbreviations are enclosed in parentheses following their definition. For example: Read Only Memory (ROM). Acronyms are al so defined in the Glossary .
User ’s Manual xxv Qosmio X300 T erminology This term is defined in this document as follows: Indicates a potentially hazar dous situation, which could result in de ath or serious injury , if you do not fo llow instructions. Star t The word " Sta rt " refers to the " " button in Micros oft ® Windows Vista TM .
User ’s Manual xxvi General Precautions TOSHIBA computers are designed to optimize safety , minimize strain and withstand the rigors of portability . Ho wever , certain precautions should be observed to further reduce the risk of personal injury or damag e to the computer .
User ’s Manual xxvii Qosmio X300 Creating a computer-friendly environm ent Place the computer on a flat surface that is large enough for the computer and any ot her items yo u are us ing, such as a printer . Leave enough space around the comput er and o ther equipment to provide adequate venti lation.
User ’s Manual xxviii Qosmio X300 Pressure or imp act damage Do not apply heavy pressure to the com puter or subject it to any form of strong impact as this can damage the computer's compone nts or otherwise cause it to malfuncti on. Mobile phones Please be aware that the use of mob ile phones can inte rfere with the aud io system.
User ’s Manual xxix Qosmio X300 2. Cooling vents on the undersid e and back of th e computer . Cooling vents Cooling vents Cooling vent T o prevent possible overheati ng of the CPU, make sure the cooling fan's air intake is not blocked. The fan draws in air by creating a vacuum.
User ’s Manual 1-1 Chapter 1 Introduction This chapter provides an equipment checkli st, and it identifies the computer ’s features, options and accessories. Equipment checklist Carefully unpack your comp uter , taking care to save the box and packaging materials for future use.
User ’s Manual 1-2 Introduction Documentation ■ Qosmio X300 Portable Personal Computer User ’s Manual (User ’s Manual) ■ Instruction Manual for Safety and Comfort ■ End User License Agreement If any of the items are missing or damaged, contact your dealer immediately .
User ’s Manual 1-3 Introduction Hardware This section describes the hardware of your computer . The actual specifications ma y vary depending on the model you purchased. Processor Memory Built-in The computer is equipped with one of the following Intel ® processor .
User ’s Manual 1-4 Introduction Power Vi deo RAM The amount of Video RAM available is dependent on the comput er's system memory . Star t -> Control Panel -> Appearance and Personalization -> Personalization -> Display Settings . The amount of Video RAM can be verified by clicking the Advanc ed Settings.
User ’s Manual 1-5 Introduction Disks Hard disk dr ive or Solid st ate drive This computer is equipped with the following types of hard disk drive(HDD). The capacity of each hard disk drive model is different. Some models are equipped with a " Solid S tate Drive (SSD)" instea d of a hard disk drive.
User ’s Manual 1-6 Introduction Optical disc drive DVD Super Multi drive The drive reads DVD-ROM's at a maximum 8x speed and CD-ROM's at a maximum 24x speed, and writes CD-R's and CD-.
User ’s Manual 1-7 Introduction Display The computer's internal disp lay panel supports high-resolution video graphics and can b e set to a wide range of viewing angl es for maximum comfort and readability .
User ’s Manual 1-8 Introduction Slots Multimedia Universal Serial Bus (USB 2.0) The computer supports multiple Universal Serial Bus ports that comply with the USB 2.0 standard. The ports with the ( ) has a USB Sl eep and Charge function .One of the USB ports has an eSA T A (External Serial A T A) function.
User ’s Manual 1-9 Introduction HDMI out port HDMI out port can co nnect with T ype A connector HDMI cable. HDMI cable can send video and audio sign als.
User ’s Manual 1-10 Introduction Communications Modem Some models are equi pped with the integrated modem. The integrated modem provides capability for data and fax communications that support the V .90 (V .92) standards and include s a modem jack for connection to the telephone line.
User ’s Manual 1-1 1 Introduction Security Sp ecial features The following features are eithe r un ique to TOSHIBA computers or are advanced features which ma ke the computer more con venient to use. Access each function using the following proce dures.
User ’s Manual 1-12 Introduction System automatic Sleep/Hibernati on Mode *1 This feature automatically shuts down the system into either Sleep Mode or Hi bernation Mode when there is no input or hardware access for a specified time. T his can be specified in the Power Options.
User ’s Manual 1-13 Introduction T OSHIBA V alue Added Package This section describes the TOSHIBA Component features pre-installed on the computer . Hibernation Mod e This feature lets you tu rn off the power to the computer without exiting from yo ur software.
User ’s Manual 1-14 Introduction Utilities and Applications This section describes the pre-installed uti lities that come with the computer and details how to start them. For further information on their operation, please refer to each utility's online manu al, help files or README.
User ’s Manual 1-15 Introduction ■ Fingerprint security cannot be used in models th at do not have a fingerprint module installed. Bluetooth St ack for Wind ows by T oshiba This software enables communication between the computer and external Blueto oth devices such as printers and mobile phones.
User ’s Manual 1-16 Introduction TOSHIBA DVD-RAM Utility TOSHIBA DVD-RAM Utility has the function of Physical Format and Write-Protect to DVD-RAM. This utility is contained the setup mod ule of TOSHIBA Disc Creator . T o access this utility , click Start -> All Programs -> TOSH I BA -> CD&DVD Applications -> DVD-RAM Utility .
User ’s Manual 1-17 Introduction Labelflash features cannot be us ed in models that do not have a DVD Super Multi drive with Labelflash. In order to dete rmine if the opti cal disc drive installed in your computer supports Labelflash follow the steps as detailed below: 1.
User ’s Manual 1-18 Introduction Optional accessories Y ou are able to add a numb er of options and accessories in order to ma ke your computer even more powerful and convenient to use .
User ’s Manual 2-1 Chapter 2 The Grand T our This chapter identifies the vari ous components of your computer . Become familiar with each component before yo u operate the computer . Front with the display closed The following figures sh ow the computer ’s front with its display panel in the closed position.
User ’s Manual 2-2 The Grand T our Lef t side The following figure shows the comp uter's left side. Figure 2-2 The left side of the computer Wireless communication switch Slide this switch to the right to turn on Wireless LAN and Bluetooth functi ons.
User ’s Manual 2-3 The Grand T our ExpressCard slo t This slot allows you to install a single ExpressCard device. Slim size remote control ler is contained in the ExpressCard slot.
User ’s Manual 2-4 The Grand T our Right side The following figure shows the comp uter ’s right side. Figure 2-3 The right side of the computer Headphone s/ S/PDIF Line Out Universal Serial Bus (USB 2.
User ’s Manual 2-5 The Grand T our Back The following figure shows the comp uter ’s back. Figure 2-4 The back of the computer ■ Connection to any communication line other than an analog phone line could cause a computer system failure. ■ Connect the built-in mod em only to ordinary analog phone lines.
User ’s Manual 2-6 The Grand T our Security lock slot A securi ty cable can be attached to this slot and then connected to a desk or other large object in order to deter theft of the computer . i.LINK (IEEE1394) port This port allows you to connect an external device, such as a digital video camera, to the computer for high-speed data transfer .
User ’s Manual 2-7 The Grand T our Underside The following figure shows the undersi de of the computer . Y ou should ensure that the disp lay is closed befo re the computer is turned over to avoid causing any damage.
User ’s Manual 2-8 The Grand T our Battery pack The battery pack provides power to the computer when the AC adapto r is not connected. For more detailed information on the use and operatio n of the battery pack please refer to Chapter 6, Power . Memory module slot s The memory module slots are located here.
User ’s Manual 2-9 The Grand T our Front with the display op en This section shows the computer wit h th e display panel open. Lift the display panel up to open the display and position it at a comfortable viewing angle.
User ’s Manual 2-10 The Grand T our Display hinge The display hinges allow the displa y panel to be position at a variety of easy-to-view angles. Stereo speakers The speakers will reproduce all of t.
User ’s Manual 2-1 1 The Grand T our Fingerprint Senso r This sensor enables you to enroll and recognize a fingerprint. For detailed information on Fingerprint Sensor , refer to Chapter 4, Using the Fingerprint Sensor . Some models are equipp ed with an Fing erprint Sensor .
User ’s Manual 2-12 The Grand T our System indicators The LED system indicators for specif ic computer operations glow when those operations are in progress. Figure 2-7 System indicators Wire les s LAN antennas Some computers in this series are eq uipped with a Wireless LAN antenna.
User ’s Manual 2-13 The Grand T our Keyboard indicators The following figures show the positions of the CAPS LOCK indica tor and the NUMLOCK indicators which show the following condi tions: ■ When the CAPS LOCK indicator glows, the keyboard will prod uce capitals when any letter is typed.
User ’s Manual 2-14 The Grand T our Optical disc drives A DVD Super-Multi drive is provided in the computer: This optical drive uses a serial A T A interface control ler for CD and DVD operation and has an indicator at its front which will glows to indicate that it is in use.
User ’s Manual 2-15 The Grand T our DVDs ■ DVD-R, DVD+R, DVD-R (Dual Layer) and DVD+R (Double Layer) media discs can only be written to once - the recorded data cannot subsequently be erased or changed. ■ DVD-RW , DVD+RW and DVD-RAM media can be recorded to more than once.
User ’s Manual 2-16 The Grand T our AC adaptor The AC adaptor can automa tically adjust to any voltage ranging from 100 to 240 volts and to a freque ncy of either 50 o r 60 hertz, enablin g you to use this computer in almost any countr y/region. The adaptor converts AC power to DC power and reduces the voltage supplied to this computer .
User ’s Manual 3-1 Chapter 3 Getting S t arted This chapter provides basic information to start using your computer . It covers the following topics: ■ If the battery pack is not pre-in stalled in the computer that you purchased, please install the battery pack before you start using the computer .
User ’s Manual 3-2 Getting S tarted ■ Connecting the AC adaptor ■ Opening the display ■ T urning on the power ■ S tarting up for the first time ■ T urning off the power ■ Resta rting the.
User ’s Manual 3-3 Getting S tarted Connecting the AC adaptor Attach the AC adaptor when you need to cha rge the battery or you want to operate from AC power . It is also th e fastest way to get started, because the battery pack will need to be charged before you can operate from battery power .
User ’s Manual 3-4 Getting S tarted 1. Connect the power cord to the AC adaptor . Figure 3-1 Connecting the power cord to the AC adap tor (3-pin plug) 2. Connect the AC adaptor' s DC output plug to the DC IN 19V jack on the back of the computer .
User ’s Manual 3-5 Getting S tarted Opening the display The computer's display panel can be opened to a wide range of angles for optimal viewing. Lift up the display panel of the computer and adjust the panel to create a comfortable veiwing angle.
User ’s Manual 3-6 Getting S tarted T urning on the power This section describes how to turn on the power - the Power indicator will then indicate the status.
User ’s Manual 3-7 Getting S tarted 1. Open the computer's display panel. 2. Press the computer's power button. Figure 3-4 T urning on the po wer St arting up for the first time The Microsoft Windows Vista TM S tartup Screen will be the first screen displayed when you turn on the power .
User ’s Manual 3-8 Getting S tarted 3. Click Start . 4. Click the arrow button ( ) locate d in the power management buttons ( ) and select Shut Down from the menu .
User ’s Manual 3-9 Getting S tarted Benefits of Sleep Mode The Sleep Mode feature provide s the following benefits: ■ Restores the previous workin g environment more ra pidly than does the Hibernation Mode feature.
User ’s Manual 3-10 Getting S tarted When you turn the power back on, you can continue where you left when you shut down the computer . Sleep Mode limitations Sleep Mode will not function under the following conditions: ■ Power is turned back on immediately after shutting down.
User ’s Manual 3-1 1 Getting S tarted T o enter Hibernation Mode, follow the steps below . 1. Click Start . 2. Click the arrow button ( ) in the power management buttons ( ) and select Hibernate from the menu.
User ’s Manual 3-12 Getting S tarted System Recovery Opti ons About 1.5GB hidden partition is alloca ted on the hard disk drive for the System Recovery Options. This partition stores files which can be used to repair the syst em in the event of a problem.
User ’s Manual 3-13 Getting S tarted Creating Optical Reco very Discs This section describes how to create Recovery Discs. A recovery image of the software on your computer i s stored on the hard disk drive, and can be copied to DVD media by using the following steps: 1.
User ’s Manual 3-14 Getting S tarted Restoring the pre-in sta lled sof tware from the Recovery hard d isk drive A portion of the total hard disk dr ive space is configured as a hidden recovery partition. This p artition stores files which can be used to restore pre-installed software in the event of a problem.
User ’s Manual 3-15 Getting S tarted 1. Load the Recovery Discs into the optical disc drive and turn off the computer's p ower . 2. While holding down F12 key on the keyboard, tu rn on your co mputer - when the Qosmio logo screen appears, release th e F12 key .
User ’s Manual 4-1 Chapter 4 Operating Basics This chapter describes the basic operations of your computer , highlights the precautions th at should be ta ken when usin g it, and details the considerations that should be made when handli ng CD/DVD media.
User ’s Manual 4-2 Operating Basics A V Controller The following functions are availa ble in this computer for operating the Media Center . This section describes an overview of each function. ■ Front operation panel ■ Remote Co ntroller Front operation p anel The Front operation panel is located above the keyboard.
User ’s Manual 4-3 Operating Basics How to Sw ipe your Finger Using the following steps when swiping fin gers for fingerprint registration or authentication will help to mi nimi ze authenticati on failures: Align the first joint of the fi nger to the center of the se nsor .
User ’s Manual 4-4 Operating Basics ■ Do not touch the sensor with a fing er or any other object which ma y have a build-up of static electricity on it. Observe the following before you place your finger on the sensor whether for fingerprint enro llment/registration or reco gnition.
User ’s Manual 4-5 Operating Basics Setup Procedure Please use the following procedure when first using fing erprint authentication. Fingerprint Registration Y ou should in itially enroll the r equired auth entication data using the Fingerprint En rollment Wizard.
User ’s Manual 4-6 Operating Basics How to Delete the Fingerprint Data Saved fingerprint data is stored in special non-volatile memory inside th e fingerprint sensor . Therefore, if you give the computer to someone else, or dispose of it in any way , the following proce ss is recommended to delete your fingerprint information: 1.
User ’s Manual 4-7 Operating Basics Point s to note about the Fingerprint U tility sof tware The Encrypting File System (EFS) is a Windows V ista ® feature. If a file is encrypted using EFS, it cannot be encrypted fu rther using the fingerprint authenticati on function.
User ’s Manual 4-8 Operating Basics How to Enable Fingerprint Pre-OS Authentication Settings It is necessary to first enroll your fi ngerprint with the Fingerprint Appli cation prior to enabling and configuring the Fingerprin t Pre-OS Authentication System.
User ’s Manual 4-9 Operating Basics Only one fingerprint authenticati on is required to replace the User/BIOS Password and the Windows Logon Password.
User ’s Manual 4-10 Operating Basics Figure 4-3 Web Camera Microphone Web camera Web camera LED ■ Do not point the web came ra directly at the sun. ■ Do not touch or press strongly on the web camera lens. Doing so may reduce image quality . Use an eyeglass cleaner (cleaner cloth) or other soft cloth to clean the lens if it becomes dirty .
User ’s Manual 4-1 1 Operating Basics Using TOSHIBA Face Recognition This feature uses a face verification lib rary to verify the face data of users when they log in Windows. Th e user can thus avoid having to enter a password or the like, which makes the login process easier .
User ’s Manual 4-12 Operating Basics How to register the Face Re cognition Dat a T ake a picture for faci al verification purposes, and register the data neede d when you log in. T o register the data needed when you log in, follow th e steps as de scribed below: 1.
User ’s Manual 4-13 Operating Basics 10. If verification is successful, click the Next button and register an account. 1 1. Register the account. Fill in the account registration fields. Fill in the all fields. 12. The Manage ment screen is displayed.
User ’s Manual 4-14 Operating Basics 5. V erification will be performed. If the authentication is successful, the image data taken in step 4 will be faded in and placed over one another . 6. Windows Welcome screen will be displayed, and wil l be logged in automatically to Wind ows.
User ’s Manual 4-15 Operating Basics Loading discs T o load CD/DVD's, follow the st eps as listed bel ow and refe r to figures 4-4 to 4-6. 1. When the computer's power is on, press the eject button to open the disc tray slightly . Figure 4-4 Pressing the eject button 2.
User ’s Manual 4-16 Operating Basics 3. Lay the CD/DVD, label side up, in the disc tray . Figure 4-6 Inserting a CD/DVD 4. Press the center of the CD/DVD gently until you feel it click into place on the center spi ndle. The disc shoul d be slightly below the top of the spindle and flush with the spindle base .
User ’s Manual 4-17 Operating Basics Removing discs T o remove CD/DVD’s, follow the step s as listed below . 1. When the computer's power is on, press the eject button to open the disc tray slightly and then gently pull it out of the system until it is fully opened.
User ’s Manual 4-18 Operating Basics How to remove a CD/DVD when the dis c tray will not open Pressing the eject button will not open the disc tray when the computer is turned off although, in these.
User ’s Manual 4-19 Operating Basics Import ant message Before you write or rewrite to an y of the media supported by the DVD Super Multi drive, please read and follow all of the setup and operati ng instructions in this section.
User ’s Manual 4-20 Operating Basics Before writing or rewriting ■ Based on TOSHIBA's limited compatibility testing, we suggest the following manufacturers of CD- R, CD-RW , DVD-R, DVD-R (Dua.
User ’s Manual 4-21 Operating Basics ■ If the disc is poor in quality , or is dirty or damaged, wr iting or rewriting errors may be noted - ensure that you check a ll discs for dirt or damage before you use them.
User ’s Manual 4-22 Operating Basics ■ Data deleted/erased from a CD-RW , DVD-RW , DVD+RW or DVD-RAM disc cannot be recove red. Y ou must check the content of the disc carefully befo re you delete i t, taking car e that, if multi ple drives that can write data to discs are connected, you do not delete data from the wrong one.
User ’s Manual 4-23 Operating Basics When w riting or re writing Please observe the followin g points whil e you write or re write data to CD-R, CD-RW , DVD-R, DVD-R (Dual Layer), DVD-RW , DVD+R, DV.
User ’s Manual 4-24 Operating Basics ■ DVD-RAM discs cannot be backed up using the 'Di sc Backup' function of TOSHIBA Disc Creator . ■ Y ou cannot back up CD-ROM, CD-R or CD-RW media to DVD-R, DVD- R (Dual Layer) or DVD-RW media using the 'Disc Backup' function of TOSHIBA Disc Creator .
User ’s Manual 4-25 Operating Basics Data V erification T o verify that data has been written or rewritten correctl y to a data CD/DVD you should follow the steps below before you begin the write/rewri te process: 1. Select Settings for Each Mode -> Dat a Disc in the Setting menu .
User ’s Manual 4-26 Operating Basics How to make a DVD-V ideo Method 1: Simplified steps for making a DVD-Video from video data captured from a DV -Camco rder: 1. Click Start -> All Programs -> DVD MovieFactory for TOSHIBA -> Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory .
User ’s Manual 4-27 Operating Basics ■ Operate the computer at Full Power . Do not use power-savi ng features. ■ While you are editing DVD, you can display preview . However , if another application is running. The preview might not display properly .
User ’s Manual 4-28 Operating Basics 4. About recorded DVDs ■ Some DVD-ROM drives for perso nal computers or other DVD players may not be able to read DVD-R/+R/-RW/-RAM discs. ■ If you use an over-used rewritable disc, the fu ll formatting might b e locked.
User ’s Manual 4-29 Operating Basics Display Devices & Audio 1. "TOSHIBA DVD PLA YER" will only run when "Co lors" is set to "Highest (32 bit)". The "Colors" setting can be adjusted on the "Monitor" tab in the "Display Settings".
User ’s Manual 4-30 Operating Basics St arting TOSHIBA DVD PLA YER Use the following procedure to start "TOSHIBA DVD PLA YER". 1. Insert an DVD-Video in the DV D Super Multi drive while Windows Vista? is running. When an DVD-Video disc is set in the DVD drive, the following application sel ection scre en may appe ar .
User ’s Manual 4-31 Operating Basics Open TOSHIBA DVD PLA YER HELP TOSHIBA DVD PLA YER features and instructions are also explain ed in detail in "TOSHIBA DVD PLA YER Help".Use the followi ng procedure to open "TOSHIBA DVD PLA YER Help".
User ’s Manual 4-32 Operating Basics Slim size remote controller Figure 4-9 Slim size remote controller CD/DVD Brightness down Brightness up Power DVD Menu Vo l u m e + Vo l u m e - OK Mute Back Sta.
User ’s Manual 4-33 Operating Basics Power St art s or terminates the oper ating system. This button functions like the Power button of your computer . By default, th e Sleep Mode is equivalent to the Power Off state of your computer . T o change the setting, click Star t , select Control p anel -> System and Maintenance -> Power Options .
User ’s Manual 4-34 Operating Basics Using the Remote Contro ller This computer includes a remote control unit, which allows you to control some of your computer ’s functions from a distant location. Operational ran ge of the Rem ote Con troller Point the Remote controller at your computer and press a button.
User ’s Manual 4-35 Operating Basics Inst alling/Remo ving batteries Be sure to install the dry batteries provided with this product before using the Remote Controller . The procedures for installing a nd removing the batte ries vary depending on the type of the Remote Controller .
User ’s Manual 4-36 Operating Basics Slim size remote controlle r Installing the battery 1. Open the battery cover on the back side of the remote contro ller . Figure 4-1 1 Opening the battery cover Observe the following precautions when using th e battery of the Remote Controller .
User ’s Manual 4-37 Operating Basics 2. Be sure to place the battery with correct polarities. Press the battery down to the stopper then push it fo rward to fit into the battery case. Figure 4-12 Inserting the battery 3. Close the battery cove r . Close the cover securely until it clicks.
User ’s Manual 4-38 Operating Basics Placing Slim size remote controller Inserting a Slim size remote controller T o insert a Slim size remote controller , follow the steps as detailed below: 1. Make sure the ExpressCard slot is empty . 2. Set the front side upward and insert a Slim size remote controller .
User ’s Manual 4-39 Operating Basics Media care This section provides tips on protecting data stored on your CD's, DVD's and floppy diskettes. Handle your media with care. Following th e simple precautions listed be low will increase th e lifetime of your media and protect the data stored on it.
User ’s Manual 4-40 Operating Basics 8. Data may be lost if the floppy diskett e is twisted, bent, or exposed to direct sunlight , extreme hea t or cold.
User ’s Manual 4-41 Operating Basics When you first launch the Realtek Audio Manag er , you wi ll see following device tabs. Speakers is the default output de vice. Microp hone is the default input device. T o chang e the default device, click the Set Default Device button under the chosen device t ab.
User ’s Manual 4-42 Operating Basics ■ MaxxT reble - For enhanced high frequencies. There are two paramets. One is the On/Off button and the other is the Intensity slider which can adjust the amount of high frequency which MaxxTreble enhances. ■ MaxxV olume - For dynamics compensation.
User ’s Manual 4-43 Operating Basics Dolby Home Theater Dolby Home Theater ® places listen ers in the middle of the onscreen action for a cinema-style experience at home or on the go.
User ’s Manual 4-44 Operating Basics Modem This section describes how to connect and disconnect the internal modem to and from a telepho ne jack. Region selectio n T elecommunication regulations vary from one regio n to another , so you will need to make sure the internal modem’s settings are correct fo r the region in which it will be used.
User ’s Manual 4-45 Operating Basics 4. Select either a region from the regi on menu or a telephony lo cation from the sub-menu. ■ When you click a reg ion it becomes the modem's defaul t selection for any new dialling locations that are cre ated within the Wi ndows Control Panel (Phone and Modem Optio ns).
User ’s Manual 4-46 Operating Basics Connecting the m odular cable T o connect the modem's modular cable, follow the steps as detailed below : 1. Plug the end of the modular cable into the computer's modem jack. 2. Plug the other end of the modular cable into a te lephone jack.
User ’s Manual 4-47 Operating Basics FM tuner This section describes how to con nect the FM tuner antenna to the computer's FM tuner jack. Using t he FM t uner T o connect the FM tuner antenna, fo llow the step s as det ailed belo w: 1. Opening the card reader's door.
User ’s Manual 4-48 Operating Basics 3. The FM radio screen is displayed. T o find a ra dio station, click - button or + button below the Seek or Tune . If you know the frequency of the station, enter the numbers. 4. T o save the station which you found, click a Save as Preset button.
User ’s Manual 4-49 Operating Basics Setting 1. Please make sure that the Wireless Communication S witch is turned on. 2. Click Star t and then click Connect T o to display Connect to a network window . 3. Click Set up a connec tion or network . 4. Follow the wizard.
User ’s Manual 4-50 Operating Basics Bluetooth TM St ack for Windows ® by T OSHIB A Please note that this software is specifically designed for the following operating systems: ■ Microsoft ® Win.
User ’s Manual 4-51 Operating Basics Wireless communica tion indicator The wireless communication indicator shows the status of the computer's wireless com munication fu nctions.
User ’s Manual 4-52 Operating Basics LAN cable types If you are using Gigabit Etherne t LAN (1000 megabits per second, 1000BASE-T), be sure to connect with a CA T5E cable or higher . Y ou cannot use a CA T3 or CA T5 cable. If you are using Fast Ethernet LAN (100 megabits per second, 100BASE- TX), be sure to connect with a CA T5 cable or higher .
User ’s Manual 4-53 Operating Basics 2. Plug one end of the cable into t he LAN jack. Press gently until you hear the latch click into place. Figure 4-18 Connecting the LAN cable 3. Plug the other end of the cable into a LAN hu b connector or router .
User ’s Manual 4-54 Operating Basics ■ Clean the plastics of the comp uter using a slig htly water dampened cloth. ■ Y ou can clean the display screen by spraying a small amount of glass cleaner onto a soft, clean cloth a nd then wiping the screen gently with the cloth.
User ’s Manual 4-55 Operating Basics ■ Be careful not to subject the computer to impact or shock - a failure to follow this instru ction could result in d amage to computer , computer failure or loss of data.
User ’s Manual 5-1 Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard - by pressing some keys in combination, all of the 104/105-key enhance d keyboard functions can be performed on the computer .
User ’s Manual 5-2 The Keyboard Function keys: F1 … F9 The function keys (not to be confused with the special FN key) are the twelve keys at the top of your key board - these keys function differentl y from other keys.
User ’s Manual 5-3 The Keyboard Sleep: Pressing FN + F3 switches the system to Sleep Mode. Hibernate: Pressing FN + F4 switches the system to Hibernation Mode. Output: Pressing FN + F5 changes the active display device. Brightness Down : Pressing FN + F6 decreases the computer's display panel brightness in individual steps.
User ’s Manual 5-4 The Keyboard Zoom: Pressing FN + Sp ace changes the display resoluti on. TOSHIBA Zooming Utility (reduce): Pressing FN + 1 reduces the icon size on the desktop or the font sizes wi thin one of the supported applica tion windows.
User ’s Manual 5-5 The Keyboard Desktop-style Keyboard The Qosmio X300 Series comes with a " desktop-style" keyb oard built into it. This means it is full-sized and features a full set of nume ric function keys (also known as calculator keys) on the right-hand side.
User ’s Manual 6-1 Chapter 6 Power The computer's powe r resources include the AC adaptor , battery pack and any internal batteries. This chapter provides details on making the most effective u.
User ’s Manual 6-2 Power T ab le 6-1 Power conditions continued Power indica tors As shown in the below table, the Battery , DC IN and Power indicators on the system indicator alert you to the computer ’s operating capability and battery charge status.
User ’s Manual 6-3 Power DC IN indicator Check the DC IN indicator to determine t he power status with the AC adaptor connected - the follow ing indi cator conditions shou ld be noted: Power i ndica.
User ’s Manual 6-4 Power Battery p ack When the AC adaptor is not connecte d, the computer's main power source is a removable lithium ion battery pack, also referred to in this manual as the battery .
User ’s Manual 6-5 Power Real T ime Clock battery The Real Time Clock (RTC) battery provides power fo r the internal real time clock and calendar function and also main tains the system configuration while the computer is turned off.
User ’s Manual 6-6 Power Charging the batteries When the power in the battery pack becomes low , the Battery indi cator will flash amber to indicate that only a fe w minute s of battery power remain.
User ’s Manual 6-7 Power Battery charging notice The battery may not begin charging immediately under the following conditions: ■ The battery is extremely hot or cold (if the battery is extremely hot, it might not charge at all).
User ’s Manual 6-8 Power Maximizing battery op erating time A battery's usefulness depends on how long it can su pply power on a single charge, while how long the c harg e lasts in a battery de.
User ’s Manual 6-9 Power Ret aining dat a with power off When you turn off your computer with fully charged batteries, the batteries retain data for the following approximate time periods.
User ’s Manual 6-10 Power The operating life of the battery pack will gradually reduce through repeated charging and discharging, and wi ll need to be replaced when it reaches the end of its operati ng life.
User ’s Manual 6-1 1 Power Figure 6-2 Releasing the battery pack (2) T o install a battery , follow the steps as detailed below: 1. Insert the battery pack as far as it will go into the computer (1). 2. Ensure that the battery pack is securely in place and the battery safety lock (2) is in its ( ) position.
User ’s Manual 6-12 Power 3. T urn your computer over . T OSHIBA Password Utility The TOSHIBA Password Utility provides two levels of p assword security: User and Supervisor .
User ’s Manual 6-13 Power Supervisor p assword If you set a Supervisor Password, so me functions might be restricted when a user logs on wit h the User Password. T o set a Supervisor Passwo rd, execute the file TO SPU.EXE. The file is located at: C:Program FilesToshibaPas swordUtilityTOSPU.
User ’s Manual 6-14 Power Power-up modes The computer has three differ ent power-up modes as follows: ■ Shut down mode: The computer will shut down without saving data - in view of this you must always save your work before you turn the computer of f.
User ’s Manual 7-1 Chapter 7 HW Setup This chapter explains how to use the TOSHIBA HW Setup program to configure your computer , and provides information on settings for various functions. Accessing HW Set up S t art, point to All Prog rams, point to TOSHIBA, point to Utilities and click HWSetup.
User ’s Manual 7-2 HW Setu p Setup This field displays BIOS V ersion and date. Password This tab allows you to set or reset the user p assword for power on. Display This tab let s you customize your com puter's display settings for either the internal LCD screen or for an external monitor .
User ’s Manual 7-3 HW Setu p Keyboard Wa ke-up on Key board When this feature is enabl ed and the computer is in Sleep mode, you can turn on the computer by pressing any key . It is effective only for the internal keyboard and only when the computer is in Sleep mode.
User ’s Manual 7-4 HW Setu p However , the "USB Sleep and Charge function" may not work with certain external devices even if they are comp liant with the USB specification. In those cases, turn the power of the computer ON to charge the device.
User ’s Manual 7-5 HW Setu p LAN Wake-up o n LAN This feat ure let s the comput er's power be turned o n when it receives a wakeup signal from the LAN. Built-in LA N This feature enables or disables th e Built-in LAN. Enabled (Mode-1) Enables USB Sleep and Charge function.
User ’s Manual 8-1 Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility . This chapter describes the connection or installation of the followin.
User ’s Manual 8-2 Optional Devices Other ■ Security lock ExpressCard The computer is equi pped with a sin g le ExpressCard slot into w hich any ExpressCard device that meets industry standards, ei ther manufactured b y TOSHIBA or another vendor , can be in stalled.
User ’s Manual 8-3 Optional Devices Removing an ExpressCard T o remove an ExpressCard, follow the steps as detailed below . 1. Open the Safely Remove Ha rdware icon on the Windows T ask Bar . 2. Point to ExpressCard and click th e left T ouch Pad control button.
User ’s Manual 8-4 Optional Devices Bridge media slot The computer is equipp ed with a Bri dge medi a slot that can accommodate some kinds of memory media with vari ous memory capacities so that you can easily transfer data from devices, such as digital cameras and Personal Digital Assistants.
User ’s Manual 8-5 Optional Devices Memory media This section provides the important safety precautions in order to handle your memory media. Points to note about the SD/SDHC memory card SD/SDHC memory cards compl y with SDMI (Secure Digital Music Initiative), which is a technology adopted to prevent unlawful copy or playback of digital music.
User ’s Manual 8-6 Optional Devices Media care Observe the following preca utions when handling the card. Card care ■ Do not twist or be nd cards. ■ Do not expose cards to liquids or store in humi d areas or lay media close to containers of liquid.
User ’s Manual 8-7 Optional Devices Ins er tin g a me mory media The following instru ctions apply to all types of supported media device s. T o insert a memory media , follow the step s as det ailed below: 1. T urn the memory media so that the contacts (met al areas) are face down.
User ’s Manual 8-8 Optional Devices 4. Grasp the media and remove it. Figure 8-5 Removing memory media Additional memory module Y ou can install additional memory into the computer in orde r to increase the amount of system memory that is avai lable.
User ’s Manual 8-9 Optional Devices Point to note abou t memory module error If you install a memory module that is not compatible with the computer , the Power indicator will flashes (on for 0.
User ’s Manual 8-10 Optional Devices 3. T urn the computer upside down and remove the battery pack (refer to Replacing the battery pack section in Chapter 6, Power , i f required). 4. Loosen securing the me mory module cover in place - please note that this screw is attached to the cover in order to prevent it from being lost.
User ’s Manual 8-1 1 Optional Devices 7. Seat the memory module cover in place and secure it with one scre w . 8. Install the battery pa ck - refer to Replacing the battery pack section in Chapter 6, Power , if required. 9. T urn your computer over .
User ’s Manual 8-12 Optional Devices 8. Seat the memory module cove r in place and secure it with a screw . 9. Install the battery pack - refer to Replacing the battery pack section in Chapter 6, Power , if required.
User ’s Manual 8-13 Optional Devices Using the USB floppy diskette drive The USB floppy diskette drive accommodates either a 1.44MB or 720KB floppy diskette and connects to one of the computer's USB ports.
User ’s Manual 8-14 Optional Devices Disconnecting the USB fl oppy diskette drive When you have finished using the USB floppy diskette drive, you can follow the procedures below in order to disconnect it: 1. W ait for the Disk-In-Use Indicator light to go out to make sure all floppy diskette activity has stopped.
User ’s Manual 8-15 Optional Devices Disconnecting an eS A T A device When you have finished using an eSA T A device, you can follow the procedures below in order to disconnect it: 1. W ait for the i ndicator lig ht of an eSA T A device to go out to make sure all activity has stopped.
User ’s Manual 8-16 Optional Devices Figure 8-10 Connecting the monitor c able to the external monitor port 3. T urn the external monitor ’s power on. 4. T urn the computer's power on. When you turn on the power , the computer will automatically recognize the monitor and determine whether it is a color or monochrome device .
User ’s Manual 8-17 Optional Devices Connecting the H DMI out port 1. Plug one end of the HDMI cable into the HDMI out port of the HDMI device. Figure 8-1 1 Connecting the HDMI out p ort 2. Plug the other end of the HDMI cable into the HDMI out port on your computer .
User ’s Manual 8-18 Optional Devices 6. Click List All Modes . 7. Select the one of the below selection at " List All Modes ". REGZA Link (PC Contr ol) HDMI out port can connect wi th T ype A connector HDMI cable. One HDMI cable can send and re ceive video, audio and control signals.
User ’s Manual 8-19 Optional Devices i.LINK (IEEE1394) i.LINK, also known as IEEE1394, is used for high-speed data transfer between a range of compatible devices such as: ■ Digital video cameras .
User ’s Manual 8-20 Optional Devices Connecting 1. Make sure the connectors are pr operly aligned before you pl ug the i.LINK (IEEE1394) cabl e into the computer . Figure 8-12 Connecting the i.LINK (IEEE1394) po rt 2. Plug the other end of the cable into the i.
User ’s Manual 8-21 Optional Devices Security lock A security locks enable you to anchor your computer to a desk or other heavy object in order to help prevent unauthorized removal or theft.
User ’s Manual 9-1 Chapter 9 T roubleshooting TOSHIBA have designed this computer for durability , however , should problems occur you are able to use the procedures detailed in this chapter to help determi ne the cause.
User ’s Manual 9-2 T roubleshooting Preliminary c hecklist Y ou should always consider the simplest solution first - the items detailed in this checklist are easy to fix and yet can cause what appea.
User ’s Manual 9-3 T roubleshooting ■ Do you hear any beeps, if so how many , are they long or short and are they high pitched or low pitched? In addition, is the computer making any unusual noise s? Write down what you hear. Record your observations so you can describe them in detail to your reseller , dealer or service provider .
User ’s Manual 9-4 T roubleshooting System start- up When the computer does not start pr operly , check the following items: ■ Self T est ■ Power Sources ■ Power-on Password Self test When the.
User ’s Manual 9-5 T roubleshooting Overheating power down In the event that the computer' s in ternal op erating temperature becomes too high, the system will automatically enter either Hibernation Mode or Sleep Mode and shut itself down.
User ’s Manual 9-6 T roubleshooting Battery If you suspect a problem with the battery , you should check the status of the DC IN indicator as well as the Battery indicator . Please refer to Chapter 6, Power for more information on these indicators, toge ther with general battery operation.
User ’s Manual 9-7 T roubleshooting Real Time Clock Password Keyboard Keyboard problems can be caused by the setup and conf iguratio n of the computer - please refer to Chapter 5, The Keyboard for further information. Problem Pro cedure The following message is displayed on the LCD: RTC battery is low or CMOS checksum is inconsistent.
User ’s Manual 9-8 T roubleshooting Internal display p anel Apparent display panel problems may b e related to the computer's setup and configuration - please refer to Chapter 7, HW Setup , for further information.
User ’s Manual 9-9 T roubleshooting DVD Supe r-Multi drive For further information, please refer to Chapter 4, Operating Basics . Slow performance The files on the hard disk drive may be fragmented - in this instance you should run the disk Defragmentation utili ty to check the condition of your files and the hard disk drive.
User ’s Manual 9-10 T roubleshooting USB floppy diskette drive The USB floppy diskette d rive is available o nly as an option. For further information, please refer to Chapter 4, Operating Basics .
User ’s Manual 9-1 1 T roubleshooting ExpressCard For further information, please refer to Chapter 8, Optional Devices . SD/SDHC memory card, mi niSD/microSD Card For further information, please refer to Chapter 8, Optional Devices .
User ’s Manual 9-12 T roubleshooting Memory S tick/Memory S tick PRO/M emory S tick PR O Duo For further information, please refer to Chapter 8, Optional Devices . xD picture card For further information, please refer to Chapter 8, Optional Devices .
User ’s Manual 9-13 T roubleshooting MultiMediaC ard For further information, please refer to Chapter 8, Optional Devices . Infrared receiver window If you are using a USB mouse, you should also refer to both the USB device section in this chapter , and the documentation supplied with your mouse.
User ’s Manual 9-14 T roubleshooting Double-tapping does not work In this instance, you should initiall y try changing the double-click speed setti ng within the Mouse Control utility . 1. T o access this utility , click Star t -> Control Panel -> Hardware and Soun d -> Mouse icon.
User ’s Manual 9-15 T roubleshooting USB mouse Problem Procedure On-screen pointer does not respond to mouse operation In this inst ance the system might be busy - T ry moving the mouse again after waiting a short while. Remove the mouse from the comp uter and then reconnect it to a free USB port it in order to ensure it is firmly attached.
User ’s Manual 9-16 T roubleshooting Fingerprint Sensor USB device In addition to the information in this section, p lease also refer to the documentation supplied with yo ur USB device.
User ’s Manual 9-17 T roubleshooting USB Sleep and Charge functi on For more information and settings, please re fer to the USB Sleep and Charge function section in Chapter 7, HW Setup. Problem Procedure I cannot use the "USB Sleep and Charge function".
User ’s Manual 9-18 T roubleshooting eSA T A device In addition to the information in this section, p lease also refer to the documentation supplied with your e SA T A device. External devices connected to the compatible port s do not work wh en connecte d to a comp atible port.
User ’s Manual 9-19 T roubleshooting Memory exp ansion Please also refer to Chapter 8, Optional Devices , for further information on installing and removing memory modul es. Sound system In addition to the information in this section, p lease also refer to the documentation supplied with your a udio device.
User ’s Manual 9-20 T roubleshooting External monitor Please also refe r to Chapter 8, Optional Devices , and to the documentation supplied with yo ur monito r for further information. Check to make sure the headphone connection is secure. Check within the Win dows Device Manager application to ensure the sound func tion is enabled.
User ’s Manual 9-21 T roubleshooting Modem Display error occurs Ch eck that the cable con necting the external monitor to the computer is firmly attached. If you are still unable to resolve the proble m, contact your reseller , dealer or servi ce provider .
User ’s Manual 9-22 T roubleshooting LAN Wireless LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 4, Operating Basics .
User ’s Manual 9-23 T roubleshooting Bluetooth For further information on Bluetooth wire less communication, please refer to Chapter 4, Operating Basics . i.LINK (IEEE1394) devi ce Problem Procedure Cannot access Bluetooth device Check to ensure the computer's wireless communication switch is set to on.
User ’s Manual 9-24 T roubleshooting Video Playback FM tuner T OSHIBA support If you require any additional help using your compu ter or if you are having problems operating the computer, you may need to cont act TOSHIBA for additional techni cal assistance.
User ’s Manual 9-25 T roubleshooting ■ If a problem occurs when you are ru nning so ftware applications, consult the software documentation for troubleshooting suggestions and consider calling the software company's technical support department for assistance.
User ’s Manual 9-26 T roubleshooting United S t ates o f America TOSHIBA America Information Systems, Inc. 9740 Irvine Boulevard Irvine , California 92618 USA United Kingdom TOSHIBA Information Systems (U.K.) Ltd. TOSHIBA Court W eybridge Business Park Addlestone Road Weybridge, Surrey KT15 2UL India T oshiba India Pvt Ltd.
User ’s Manual 10-1 Chapter 10 Legal Footnotes This chapter states the Legal Footnotes information applicable to TOSHIBA computers. In the text in this manu al, *XX is used to show which Legal Footnotes description is related to TOSHIBA computers. Description(s) rel ated to this comput er are marked with a blu e *XX in this manual.
User ’s Manual 10-2 Legal Footnotes Under some conditions, your computer product may automatically shut- down. This is a normal protective feat ure designed to reduce the risk of lost data or damage to the product when used outside recommended conditions.
User ’s Manual 10-3 Legal Footnotes Battery Life *3 Battery life may vary considerably depend ing on product model, configuration, applications, power ma nagement settings and features utilized, as well as the natural perf ormance variations produced by the design of indi vidual compone nts.
User ’s Manual 10-4 Legal Footnotes Wireless LAN *7 The transmission speed over th e wireless LAN and th e distance over which wireless LAN can re ach may vary depen ding on surro unding electromagnetic environment, obstacles, access po int design and configuration, and client design and software/hardware configurati ons.
User ’s Manual 10-5 Legal Footnotes Safety Use for TV T uner *13 If you have to operate your com puter during a thunderstorm and are connecting the TV tuner to an outside antenna, you should operate yo ur computer using AC power mode.
User ’s Manual A-1 Appendix A S pecifications This appendix summarizes the computer ’s technical specifications. Physical Dimensions Refer to User ’s Manual about Weight and Size.
User ’s Manual A-2 S pecifications Power Requirement s Built-in Mod em AC adaptor 100-240 volts AC 50 or 60 hertz (cycles per second) Computer 19 VDC 9.
User ’s Manual A-3 S pecifications Communication speed Data transmission and reception 300/1200/2400/4800/7200 /9 600/12000/14400 /16 800/19200/21600/24000 /26400/28800/3 1200/33 600 bps Data reception only with V .
User ’s Manual B-1 Appendix B Display Controller and V ideo modes Display controller The display controller in terprets software commands into hardware commands that turn particular parts on the screen on or of f.
User ’s Manual C-1 Appendix C Wireless LAN This appendix is intended to hel p you get your Wireless LAN network up and running, with a mi nimum of parameters. Card S pecifications Form Factor PCI Express Mini Card Compati bility ■ IEEE 802.1 1 S tandard for Wireless LAN ■ Wi-Fi (Wireless Fidelity) certified by the Wi-Fi Alliance.
User ’s Manual C-2 Wireless LAN Radio Characteristics Radio Characteristics of Wireless LAN Cards may vary according to: ■ Country/region where the product was purcha sed ■ T ype of pro duct Wireless communication is often subject to local radio regulations.
User ’s Manual C-3 Wireless LAN Wireless IEEE 802.1 1 Channel s Set s (Revision B, G and N Draft V er . 2.0) *1 Factory-set default channels *2 Refer to the sheet Approved Countries/Regions for use for the countries/regions that in whi ch these channels can be used.
User ’s Manual C-4 Wireless LAN Wireless IEEE 802.1 1 Channels Sets (Revision A and N Draft V er . 2. 0) Frequency Range Channel ID 5150-5850 MHz 36 5180 40 5200 44 5220 48 5240 52 5260 56 5280 60 5.
User ’s Manual C-5 Wireless LAN * The approved channels on using are di fferent at each country or region. When using these channels in any cou ntry or region, refer to the addendum sheet which is Approved Countries/Re gions for use.
User ’s Manual D-1 Appendix D Bluetooth wireless technology Interoperability Bluetooth™ Cards from TOSHIBA are designed to be interoperable with any product with Bluetooth wireless te chnology that is based on F requency Hopping S pread S pectrum (FHSS) radio technology , a nd is compliant to: ■ Bluetooth S p ecification V er .
User ’s Manual D-2 Bluetooth wireless technology Interoperability Bluetooth w ireless techno logy and your Health The products with Bluetooth wireless te chnology , like other radio devices, emit radio frequency electromagnetic energy .
User ’s Manual D-3 Bluetooth wireless technology Interoperability Canada - Industry Canada (IC) This device complies with RSS 210 of Industry Canada.
User ’s Manual D-4 Bluetooth wireless technology Interoperability Caution: Exposure to Rad io Frequency Radiation The radiated output power of the Bl uetooth™ Card from TOSHIBA is far below the FCC radio frequen cy exposure limits.
User ’s Manual D-5 Bluetooth wireless technology Interoperability 2. Indication The indication shown below appe ars on this equipment. (1) 2.4 : This equip ment uses a frequency of 2 .4 GHz. (2) FH : This equipment uses FH-SS modulation. (3) 1: The interference range of this equi pment is less than 10 m.
User ’s Manual D-6 Bluetooth wireless technology Interoperability Device Auth orization This device obtains the T echnical Conditions Compliance App roval, and it belongs to the device class of radio equipment of low-power da ta communication system radio station st ipulated in the T elecommunications Business Law .
User ’s Manual E-1 Appendix E AC Power Cord and Connectors The power cord’s AC input plug must be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Certification agencies Length: Minimum 1.
User ’s Manual E-2 AC Power Cord and Connectors In Europe, two conductors power cord must be VDE type, H05VVH2-F or H03VVH2-F and for three conductors power cord must be VDE type, H05VV - F .
User ’s Manual F-1 Appendix F Usage Restrictions This appendix descri bes the Usage Restrictions. ■ This configuration is designed to wo rk with a signal from a conventional (standard or analog) TV antenn a.
User ’s Manual Glossa ry-1 Glossary The terms in this glossary cover topi cs related to this manual. Alternate naming is included for reference. Abbreviations AC: alternating curre nt AGP: accelerat.
User ’s Manual Glossa ry-2 Glossary IRQ: interrupt request KB: kilobyte LCD: liquid crystal display LED: light emitting diode LSI: large scale integration MB: megabyte OCR: optica l character recogn.
User ’s Manual Glossa ry-3 Glossary ANSI: American National S tandards Instit ute. An organization established to adopt and define standards for a variety of technical discipl ines. For example, ANSI defined the ASCII standard and other information processing requirements.
User ’s Manual Glossa ry-4 Glossary byte: The representation of a single cha racter . A sequence o f eight bits treated as a single unit; also the smallest addressa ble unit within the system. C cache memor y: High speed memory which stores da ta that increases processor speed and data transfer rate.
User ’s Manual Glossa ry-5 Glossary comp atibility: 1) The ability of one computer to accept and process data in the same manner as another com puter wi thout modifying the data or the media upon which it is b eing transferred. 2) the ability of one device to connect to or communicate with another system or component.
User ’s Manual Glossa ry-6 Glossary default: Th e parameter value automatically selected by the system when you or the program do not provide instructions. Also called a preset value. delete: T o remove data from a disk or other data storage device.
User ’s Manual Glossa ry-7 Glossary DVD+R (Double Layer): A disc having two layers on one side with the DVD+R storage capacity about 1.8 times larger than before. The DVD-RW drive uses a laser to read d ata from the disc. E echo: T o send ba ck a reflection of the transmitted data to the sending device.
User ’s Manual Glossa ry-8 Glossary G gigabyte (GB): A unit of data storage equal to 102 4 megabytes. Se e also megabyte. graphics: Drawings, pictures, or other images, su ch as charts or graphs, to present information. H hard disk: A non-removable disk usually referred to as drive C.
User ’s Manual Glossa ry-9 Glossary interrupt request: A signal that gives a component access to the processor . I/O: Input/output. Refers to acceptance and transfer of data to and from a computer . I/O devices: Equipment used to communicate with the computer and transfer data to and from it.
User ’s Manual Glossary-10 Glossary megabyte (MB): A unit of data storage equal to 1024 kilobytes. See also kilobyte. megahertz: A unit of wave frequency that equals 1 million cycles per second. See also hertz. menu: A software interface that displa ys a list of options on the screen.
User ’s Manual Glossary-1 1 Glossary output: The results of a computer operation. Output commonly indicates data . 1) printed on paper , 2) displayed at a termi nal, 3) sent through the serial port of internal modem, or 4) stored on some magnetic med ia.
User ’s Manual Glossary-12 Glossary R Radio frequency in terf erence (RFI) shield: A metal shield enclosing the printed circuit boa rds of the printer or computer to preven t radio and TV interference. All computer equ ipment generates radio frequency signals.
User ’s Manual Glossary-13 Glossary sof tware: The set of progra ms, procedures and related documentation associated with a computer system. S p ecifically refers to computer programs that direct and co ntrol th e computer system’s activities. See also hardware.
User ’s Manual Glossary-14 Glossary W warm start: Rest arting or resetting a co mputer with out turning it off. window: A portion of the screen that can display its own application, document or dialog box. Often used to mean a Microsoft Windows window .
User ’s Manual Index-1 Index A AC adaptor, 1-4 additional, 1-18 connecting, 3-3 DC IN 19V jack, 2-6 B Battery charging, 6-6 extending ba ttery life, 6-9 indicator, 2-12, 6- 2 Monitoring capacity, 6-.
User ’s Manual Index-2 Qosmio X300 Heat dispersal, 1-12 Hibernation Mo de, 1-13 Hot keys, 1-11 HW Setup accessing, 7-1 general, 7-1 I i.LINK, 1-8, 2-6 connecting, 8-20 disconnecting, 8-20 precaution.
User ’s Manual Index-3 Qosmio X300 AC power, 9-5 Analyzing the problem, 9- 2 Battery, 9-6 Bluetooth, 9-23 ExpressCard, 9-11 External monitor, 9-20 Fingerprint Sensor, 9-1 6 Hard disk drive, 9-8 Hardware and s ystem checklist, 9-3 i.
User ’s Manual Index-4 Qosmio X300 V Video modes, B-1 Video RAM, 1-4 W Web Camera, 1-8 Wireless communication, 4-48 indicator, 4-51 Wireless communication s witch, 1-11, 2-2, 4-50 Wireless LAN, 1-10.
デバイスToshiba X300の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toshiba X300をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToshiba X300の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toshiba X300の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toshiba X300で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toshiba X300を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToshiba X300の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toshiba X300に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToshiba X300デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
