ToyotaメーカーTundra (2015)の使用説明書/サービス説明書
ページ先へ移動 of 576
Pictorial index Search by illustration 1 For safety and security Make sure to read through them 2 Instrument cluster How to read the gauges and meters, the variety of warning lights and indicators, etc. 3 Operation of each component Opening and closing the doors and windows, adjustment before driving, etc.
TABLE OF CONTENTS 2 For your information....................... 8 Reading this manual .................... 12 How to search .............................. 13 Pictorial index .............................. 14 1-1. For safe use Before driving ..........
3 1 9 8 7 5 4 3 2 10 6 4-1. Before driving Driving the vehicle ............. 146 Cargo and luggage............ 153 Vehicle load limits ............. 156 Trailer towing..................... 158 Dinghy towing.................... 178 4-2. Driving procedures Engine (ignition) switch .
TABLE OF CONTENTS 4 5-7. Connecting Bluetooth ® Preparations to use wireless communication ................ 283 Registering a Bluetooth ® audio player for the first time ............... 287 Registering a Bluetooth ® phone for the first time ... 288 Registering a Bluetooth ® device .
5 1 9 8 7 5 4 3 2 10 6 6-4. Other interior features Other interior features ....... 374 • Sun visors ..................... 374 • Vanity mirrors ................ 374 • Clock ............................. 375 • Outside temperature display ......
TABLE OF CONTENTS 6 9-1. Specifications Maintenance data (fuel, oil level, etc.) .......... 502 Fuel information ................ 520 Tire information ................. 524 9-2. Customization Customizable features ...... 534 9-3. Items to initialize Items to initialize.
7 1 9 8 7 5 4 3 2 10 6 I n f o r m a t i o n P r o v i d e d b y :.
8 F or your inf or ma tion Please note that this manual applies to all models and all equipment, includ- ing options. Therefore, you may find some explanations for equipment not installed on your vehicle. All specifications provided in this manual are current at the time of printing.
9 The installation of a mobile two-way radio system in your vehicle could af fect electronic systems such as: ● Multiport fuel injection system/sequential multiport fuel injection system ● Cruise .
10 This vehicle is equipped with an event data recorder (EDR). The main pur- pose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed.
11 The SRS airbag and seat belt pretensioner devices in your T oyota contain explosive chemicals. If the vehicle is scrapped with the airbags and seat belt pretensioners left as they are, this may cause an accident such as fire.
12 R eading this manual CAUTION: Explains something that, if not obeyed, co uld cause death or serious injury to people. NOTICE: Explains something that, if not obeyed, could cause damage to or a malfunction in the vehicle or its equipment. Indicates operating or working procedures.
13 Ho w to search ■ Searching by name • Alphabetical index ....... P . 565 ■ Searching by inst allation position • Pictorial index ................P . 14 ■ Searching by symptom or sound • What to do if... (T roubleshooting) ........P . 562 ■ Searching by title • T able of contents .
14 Pictorial index Pictorial inde x ■ Exterior The illustration represents the CrewMax models and may dif fer from the body shape of other models. Side doors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 100 Locking/unlocking .
15 Pictorial index Fuel filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 195 Refueling method . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 195 Fuel type/fuel tank cap acity . . . . . .
16 Pictorial index ■ Instrument p anel Fro nt sep arated type seats Engine switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 179 S tarting the engine/changing the positions . . . . . . . . . . . . . . . P . 179 Emergency stop of the engine .
17 Pictorial index T urn signal lever . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 186 Headlight switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 188 Headlights/parking light s/tail light s/ daytime running light s * 1 .
18 Pictorial index Front be nch type seat Engine switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 179 S tarting the engine/changing the positions . . . . . . . . . . . . . . . P . 179 Emergency stop of the engine .
19 Pictorial index Parking brake pedal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 187 Applying/releasing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 187 Precautions against winter season . . . . . .
20 Pictorial index ■ Switches The illustration represents the instrument panel for the front sep arated type seat. Driving position memory switches * 1 . . . . . . . . . . . . . . . . . . P . 1 16 Power window switches * 2 . . . . . . . . . . . . . .
21 Pictorial index Audio remote control switches * 5 T elephone switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 309 “DISP” button * 2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 91 Cruise control switch * 2 .
22 Pictorial index Emergency flasher switch . . . . . . . . . . . . . . . . . . . . . . . . . . P . 456 Front-wheel drive control switch * 1 . . . . . . . . . . . . . . . . . . . P . 225 Tire pressure warning res et switch . . . . . . . . . . . . . . .
23 Pictorial index ■ Interior Fro nt sep arated type seats SRS airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 38 Floor mat s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
24 Pictorial index Front be nch type seat SRS airbags . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 38 Floor mat s. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 28 Front seat s .
25 Pictorial index Inside rear view mirror . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 127 Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . P . 374 Va n i t y m i r r o r s * 2 . . . . . . . . .
26 Pictorial index I n f o r m a t i o n P r o v i d e d b y :.
27 For safety and security 1 1-1. For safe use Before driving ...................... 28 For safety drive ................... 30 Seat belts ............................ 32 SRS airbags ........................ 38 Front passenger occupant classification system .
28 1-1. For safe use Bef ore driving Use only floor mats designed specif ically for vehicles of the same model and model year as your vehi cle. Fix them securely in place onto the carpet. Insert the retaining hooks (clips) into the floor mat eyelets. T urn the upper knob of each retaining hook (clip) to secure the floor mats in place.
29 1-1. For safe use 1 For safety and security CAUTION Observe the following precautions. Failure to do so may cause the driver ’s floor mat to slip, possibly interfering with the pedals while driving.
30 1-1. For safe use F or safety driv e Adjust the angle of the seat- back so that you are sitting straight up and so that you do not have to lean forward to steer . ( P. 1 1 1 ) Adjust the seat so that you ca n depress the pedals fully and so that your arms bend slightly at the elbow when gripping the steering wheel.
31 1-1. For safe use 1 For safety and security CAUTION Observe the following precautions. Failure to do so may result in death or serious injury . ● Do not adjust the position of the driver ’s seat while driving. Doing so could cause the driver to lose control of the vehicle.
32 1-1. For safe use Sea t belts ● Extend the shoulder belt so that it comes fully over the shoulde r , but does not come into contact with the neck or slide off the shoulder . ● Position the lap belt as low as possible over the hips. ● Adjust the position of the seat- back.
33 1-1. For safe use 1 For safety and security Push the seat belt shoulder anchor dow n while pressing the release button. Push the seat belt shoulder anchor up.
34 1-1. For safe use ■ Emergency locking retractor (ELR) The retractor will lock the belt during a sudden stop or on imp act. It may also lock if you lean forward too quickly . A slow , easy motion will allow the belt to extend so that you can move around fully .
35 1-1. For safe use 1 For safety and security CAUTION Observe the following precautions to reduce the risk of injury in th e event of sudden braking, sudden swerving or an accident. Failure to do so may cause death or serious injury . ■ Wearing a seat belt ● Ensure that all passengers wear a seat belt.
36 1-1. For safe use CAUTION ■ When children are in the vehicle Do not allow children to play with the seat belt. If the seat belt becomes twisted around a child’s neck, it may lead to choking or other serious injurie s that could result in death.
37 1-1. For safe use 1 For safety and security CAUTION ■ Before using a front seat belt (Regular Cab models) Make sure the seat belt hanger is secured in the raised position before you fasten the seat belt. ■ Using a seat belt extender ● Do not wear the seat belt extender if you can fasten the seat belt without the extender .
38 1-1. For safe use SRS airbags The SRS airbags inflate when the vehicle is subjected to certain types of severe imp acts that may cause significant injury to the occupa nt s. They work together with the seat belt s to help reduce the risk of death or serious injury .
39 1-1. For safe use 1 For safety and security ◆ SRS front airbags SRS driver airbag/front passenger airbag Can help protect the head and chest of the driver and right front passenger from impact wi.
40 1-1. For safe use R egular Cab models D ouble Cab and CrewMax models SRS airbag system components I n f o r m a t i o n P r o v i d e d b y :.
41 1-1. For safe use 1 For safety and security Y our vehicle is equipped with ADV ANCED AIRBAGS designed based on the US motor vehicle safety standards (FMVSS208). The airbag sensor assembly (ECU ) controls airbag dep loyment based on infor- mation obtained from the senso rs et c.
42 1-1. For safe use CAUTION ■ SRS airbag precautions Observe the following precautions regarding the SRS airbags. Failure to do so may cause death or serious injury . ● The driver and all passengers in the vehicle must wear their seat belts properly .
43 1-1. For safe use 1 For safety and security CAUTION ■ SRS airbag precautions ● The SRS front passenger airbag also deploys with considerable force, and can cause death or serious injury especially if the front passenger is very close to the airbag.
44 1-1. For safe use CAUTION ■ SRS airbag precautions ● Do not hang coat hangers or other hard objects on the coat hooks. All of these items could become projectiles and may cause death or serious injury , should the SRS c urtain shield airbags deploy .
45 1-1. For safe use 1 For safety and security CAUTION ■ SRS airbag precautions ● Do not use seat accessories which cover the part s where the SRS side airbags inflate as they may interfere with inflation of the airbags.
46 1-1. For safe use ■ If the SRS airbags deploy (inflate) ● Bruising and slight abrasions may result from cont act with a deploying (inflating) SRS airbag.
47 1-1. For safe use 1 For safety and security ■ Conditions under which the SRS airbags may dep loy (inflate), other than a collision The SRS front airbags and SRS curtain shield airbag s may also deploy if a serious impact occurs to the underside of your vehicle.
48 1-1. For safe use ■ T ypes of collisions that may not deploy the SRS airbags (SRS side and curt ain shield airbags) The SRS side and curtain shield airbags may not activate if the vehicle is subjected to a collision from the side at certain angles, or a collision to the side of the vehicle body other than the passenger comp artment.
49 1-1. For safe use 1 For safety and security ■ When to contact your T oyot a dealer In the following cases, the vehicle will require inspection and/or repair . Con- tact your T oyota dealer as soon as possible. ● Any of the SRS airbags have been inflated.
50 1-1. For safe use F r ont passenger occup ant c lassification system Y our vehicle is equipped with a front p a ssenger occup ant classi- fication system. This system detects the conditions of the front p assenger seat and activates or deac tivates the devices for the front p assenger .
51 1-1. For safe use 1 For safety and security ■ Adult * 1 ■ Child * 3 or child restraint system * 4 Condition and operation in the front p assenger occupant classi- fication system Indicator/ war.
52 1-1. For safe use ■ Unoccupied ■ There is a malfunction in the system Indicator/ warning light “AIR BAG ON” and “AIR BAG OFF” indicator lights Not illuminated SRS warning light Off Fron.
53 1-1. For safe use 1 For safety and security * 1 : The system judges a person of adult size as an adult. When a smaller adult sits in the front p assenger seat, the system may recognize him/her as a child depending on his/her physique and posture.
54 1-1. For safe use CAUTION ■ Front p assenger occup ant classification system precautions ● Do not recline the front passenger seatback so far that it touches a rear seat or a back wall.
55 1-1. For safe use 1 For safety and security Saf ety info r ma tion fo r children ● Double Cab and Crew Max models: It is recomme nded that children sit in the rear seats to avoid acci dental contact with the shift lever , wiper switch, etc.
56 1-1. For safe use C hi ld res t rai n t s ys te ms S tudies have show n that installing a child restraint on a rear seat is much safer than installing one on the front passenger seat. ● Choose a child restraint system that suits your vehicle and is appro- priate to the age and size of the child.
57 1-1. For safe use 1 For safety and security Child restraint systems are classified in to the following 3 types according to the age and size of the child: ■ Selecting an appropriate child restraint system ● Use a child restraint system appropriate for the child until the child becomes large enough to properly wear the vehicle’s seat belt.
58 1-1. For safe use CAUTION ■ Child restraint precautions ● For effective protection in automobile accident s and sudden stops, a child must be properly restrained, using a seat belt or child restraint system depending on the age and size of the child.
59 1-1. For safe use 1 For safety and security CAUTION ■ Child restraint precautions ● Do not use the seat belt extender when installing a child restraint system on the front or rear passenger seat.
60 1-1. For safe use Installing ch ild re straints R egular Cab models Seat belts equipped with a child restraint lock ing mechanism (ALR/ELR belts except driver's seat belt) ( P . 34) Anchor brackets (for top tether strap) Anchor brackets are provided for all passenger seat s.
61 1-1. For safe use 1 For safety and security D ouble Cab models Child restraint LA TCH anchors LA TCH anchors are provided for the outer rear seats.
62 1-1. For safe use CrewMax mo dels Child restraint LA TCH anchors LA TCH anchors are provided for the outer rear seats. (Buttons dis- playing the location of the anchors are attached to the seat s.) Seat belts equipped with a child restraint lock ing mechanism (ALR/ELR belts except driver's seat belt) ( P .
63 1-1. For safe use 1 For safety and security Ty p e A Widen the gap between the se at cu shion and seatback slightly . Latch the hooks of the lower straps onto the LA TCH anchors. If the child restraint has a top tether strap , the top tether strap should be latched onto the to p tether strap ancho r .
64 1-1. For safe use Ty p e A Widen the gap between the se at cu shion and seatback slightly . Latch the hooks of the lower straps onto the LA TCH anchors. If the child restraint has a top tether strap , the top tether strap should be latched onto the to p tether strap ancho r .
65 1-1. For safe use 1 For safety and security ■ Rear-facing (Regular Cab models) Infant seat/convertible seat Never install a rear-facing child restrain.
66 1-1. For safe use While pushing the child restraint system down into the rear seat, allow the shoulder belt to retr act until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
67 1-1. For safe use 1 For safety and security While pushing the child restraint system into the rear seat, allow the shoulder belt to retract until the child restraint system is securely in place. After the shoulder belt has retracted to a point where there is no slack in the belt, pull the belt to check that it cannot be extended.
68 1-1. For safe use Push the buckle release button and fully retract the seat belt. Secure the child restraint system usin g a seat belt. Remove the he ad restraint. ( P . 121) Installing position: Right side passenger seat Center passenger seat Remove the anch or bracket cover .
69 1-1. For safe use 1 For safety and security Latch the hook onto the anchor bracket and tighten the top teth er strap. Make sure the top tether strap is securely latched.
70 1-1. For safe use Pull up the straps of right and center seats. Route the top teth er strap through the anch or strap router as shown in the illustration. Make sure the top tether strap is not twisted. Anchor strap router Latch the hook onto the anchor str ap ring and tighten the top tether strap.
71 1-1. For safe use 1 For safety and security Replace the head restraints of right an d center rear se ats . ( P . 122) ■ Left rear seat Secure the child rest raint system usin g a seat belt or the lower anchors. Remove the head r estraints of center and left rear seats.
72 1-1. For safe use Latch the hook o nto the anchor strap ring and tighten the top tether strap. Make sure the top tether strap is securely latched. Anchor strap ring Replace the head restraints of center and left seats.
73 1-1. For safe use 1 For safety and security Route the top tether strap through th e anch or strap belt as shown in the illustration. Make sure the top tether strap is not twisted. Anchor strap belt Latch the hook on to the anchor st rap belt and tighten the top tether strap.
74 1-1. For safe use ■ Left seat Secure the child rest raint system usin g a seat belt or the lower anchors. Remove the head r estraints of the center and left rear seats. ( P . 121) Route the top teth er strap through the anchor strap belt as shown in the illustration.
75 1-1. For safe use 1 For safety and security ■ Laws and regulations pertaining to anchorages The LA TCH system conforms to FMVSS225 or CMVSS210.2. Child restraint systems conforming to FMVSS213 or CMVSS213 specifica- tions can be used. This vehicle is designed to conform to the SAE J1819.
76 1-1. For safe use CAUTION ■ When inst alling a ch ild restraint system ● When a booster seat is installed, always ensure that the shoulder belt is positioned across the center of the child’ s shoulder . The belt should be kept away from the child’s neck, but not so that it could fall off the child’ s shoulder .
77 1-1. For safe use 1 For safety and security Exhaust gas precautions Harmful substance to the human body is included in exhaust gases if inhale. CAUTION Exhaust gases include harmful carbon monoxide (CO), which is colorless and odorless. Observe the following precautions.
78 1-2. Theft deterrent system Engine immobilizer system The indicator light flashe s after the key has been removed from the engine switch to indicate that the system is operating. The indic ator light stops flashing after the registered key has been inserted into the engine switch to indicate that the system has been canceled.
79 1-2. Theft deterrent system 1 For safety and security ■ Certifications for the en gine immobilizer system For vehicle s sold in the U.S.A. FCC ID: MOZRI-21BTY This device complies with Part 15 of the FCC Rules.
80 1-2. Theft deterrent system Alar m The alarm uses light and sound to give an alert when an intru sion is detected. The alarm is triggered in the following situations when the alarm is set: ● A locked door is unlocked or opene d in any way other than using a key or wireless remote control.
81 1-2. Theft deterrent system 1 For safety and security ■ System maintenance The vehicle has a maintenance-free type alarm system. ■ Items to check before locking the vehicle T o prevent unexpected triggering of the alarm and vehicle theft, make sure of the following: ● Nobody is in the vehicle.
82 1-2. Theft deterrent system I n f o r m a t i o n P r o v i d e d b y :.
83 Instrument cluster 2 2. Instrument cluster Warning lights and indicators .......................... 84 Gauges and meters ............ 88 Multi-information display .
84 2. Instrument cluster War ning lights and indicator s The warning light s and indicators on the instrument cluster and center panel inform the driver of the st atus of the vehicle’s vari- ous systems. For the purpose of explanation, the following illustration dis- plays all warning light s a nd indicators illuminated.
85 2. Instrument cluster 2 Instrument cluster W arning lights inform the driver of malfunctions in t he in dicated vehi- cle’s systems. * 1 : These lights turn on when the engine switch is turned to the “ON” position to indicate that a system check is being performed.
86 2. Instrument cluster The indicators in form the driver of the operating state of the vehicle’s various systems. Indicators T urn signal indicator ( P . 186) * 3, 4 (If equipp ed) BSM outside rear view mirror indicator ( P . 217) (U.S.A.) Headlight indicator ( P .
87 2. Instrument cluster 2 Instrument cluster * 1 : These lights turn on when the engine switch is turned to the “ON” position to indicate that a system check is being performed. They will turn off af ter the engine is started, or after a few seconds.
88 2. Instrument cluster Gauges and meter s T achometer Displays the engine speed in revolutions per minute Engine coolant temperature ga uge Displays the engine coolant temperature Fuel gauge Display.
89 2. Instrument cluster 2 Instrument cluster The brightness of th e instrument panel lights can be adjusted by turn- ing the “ODO/TRIP” button. Darker Brighter Instrument p anel light control 1 2.
90 2. Instrument cluster Multi-info r mation display The multi-information disp lay present s the driver with a variety of driv- ing-related data including the current outside air temperature. ● T rip information ( P. 9 1 ) Displays fuel consumption, driving range, outside temperature and other cruising related information.
91 2. Instrument cluster 2 Instrument cluster ■ Odometer Displays the total distance the vehicle has been driven ■ T rip meters “A” and “B ” Displays the distance the vehicle has been driven since the meter was last reset. Trip meters “A” and “B” can be used to recor d and display different distances independently .
92 2. Instrument cluster ■ Elap sed time Displays the elapsed time since the engine was started ■ A ve rage vehicle speed Displays the average vehicle speed since the engine was started ■ Out side tempera ture P. 3 7 6 ■ Settings display P.
93 2. Instrument cluster 2 Instrument cluster ■ Setting the turn-by-turn naviga tion (vehicles with navigation system) Selecting “TURN BY TURN NA VI” o n the menu screen. Select the tu rn-by-turn naviga - tion system on or off. Press and hold the “DISP” button to input your choice.
94 2. Instrument cluster ■ Returning the previous screen Press and hold th e “DISP” but- ton after selecting the “EXIT” by pressing the “DISP” button.
95 2. Instrument cluster 2 Instrument cluster ■ T o select the unit s Information miles (MPG US) km (L/100km) Average fuel consumption MPG L/100km Driving range miles km Outside temperature display .
96 2. Instrument cluster I n f o r m a t i o n P r o v i d e d b y :.
97 3 Operation of each componen t 3-1. Key information Keys .................................... 98 3-2. Opening, closing and locking the doors Side doors ......................... 100 Tailgate ............................. 106 3-3. Adjusting the seats Front seats .
98 3-1. Key information Ke y s The following keys are provided with the vehicle. V e hicles without engi ne immobilizer system Keys Key number plate V e hicles with engine immobilizer system K.
99 3-1. Key information 3 Operation of each component NOTICE ■ T o prevent key damage (vehicles with engine immobilizer system) ● Do not drop the keys, subject them to strong shocks or bend them. ● Do not expose the keys to high temperatures for long periods of time.
100 3-2. Opening, closing and locking the doors Side door s ◆ Key V e hicles without power d oor lock system Locks the door Unlocks the door V e hicles with power d oor lock system Locks all the doors Unlocks all the doors T urning the key unlocks the driver ’s door .
101 3-2. Opening, closing and locking the doors 3 Operation of each component ◆ W ireless remote control (if equipped) Locks all the doors Check that the door is securely locked. Unlocks all the doors Pressing the button unlocks the driver ’s door .
102 3-2. Opening, closing and locking the doors ■ Conditions affecting operation (veh icles with wireless remote control) The wireless remote control function may not operate normally in the following situations.
103 3-2. Opening, closing and locking the doors 3 Operation of each component ■ Door lock switch (if equipped) Locks all the doors Unlocks all the doors ■ Inside lock buttons Locks the door Unlocks the door The front doors can be opened by pulling the inside handle even if the lock buttons are in the lock position.
104 3-2. Opening, closing and locking the doors The door cannot be op ened from inside the vehicle when the lock is set. Unlock Lock These locks can be set to prevent children from opening the rear doors. Push down on each rear door switch to lock both rear doors.
105 3-2. Opening, closing and locking the doors 3 Operation of each component ■ Customization that can be co nfigured at T oyot a dealer Settings (e.g. unlocking function using a key) can be changed. (Customizable features: P . 534) CAUTION ■ T o prevent an accident Observe the following precautions while driving the vehicle.
106 3-2. Opening, closing and locking the doors T ailgate Unlock the tailgate Lock the t ailgate Pull the handle Open the tailgate slowly The support cables will hold the tailgate horizont al. Lift and closing the tailgate After closing the t ailgate, try pulling i t t o w a r d y o u t o m a k e s u r e i t i s securely locked.
107 3-2. Opening, closing and locking the doors 3 Operation of each component ■ Before removing the tailgate These connector co vers are used when re moving the tailgate, to prevent the back-up camera wire harness con nectors from being contaminated.
108 3-2. Opening, closing and locking the doors Open the tailgate. Pull out the plastic wire protec- tor located in the vehicle bed by pressing the tabs and pulling the protector . Plastic wire protector Pull out the wire harness from the vehicle bed.
109 3-2. Opening, closing and locking the doors 3 Operation of each component ■ Removing the t ailgate Open the tailgate to the angle where you can re lease the brackets on the support cables from the lugs on both sides. Lift the support cable bracket up and slide it o f f.
110 3-2. Opening, closing and locking the doors For rear end protection and easie r step-up loading. T o get on the rear step bumper , use the shaded area in the illustra- tion. Rear step bumper CAUTION ■ Before removing the t ailgate Disconnect the wire harness between the back-up camera and the vehicle.
111 3-3. Adjusting the seats 3 Operation of each component F r ont seats ■ Driver ’s seat ■ Passenger ’s seat Manual sea t Adjustment procedure (sep arated type seats) Seat position adjust.
112 3-3. Adjustin g the seats Power seat Seat position adjustment switch Seatback angle adjustment switch Seat lumbar support adjust- ment swit ch Adjustment procedure (bench type seats) 1 2 3 Sea.
113 3-3. Adjusting the seats 3 Operation of each component ■ Power easy access system (vehicles with driving position memory) The driver ’s seat and steering wheel move in accordance with engine switch position and the driver ’s seat belt condition.
114 3-3. Adjustin g the seats R e ar sea ts (Double Cab and Cr ewMax mod- els) Use the seat belt hang ers to prevent the belts from being tangled. Pull and release the leve r to unlock while raising the bottom cushion until it locks.
115 3-3. Adjusting the seats 3 Operation of each component CAUTION ■ When raising the bottom cushion Observe the following precautions. Failure to do so may result in death or serious injury . ● Do not raise the bottom cushion while driving. ● S top the vehicle on level ground, set the parking brake and shift the shift lever to P .
116 3-3. Adjustin g the seats Driving position memor y (driv er’ s seat ) The driver ’s and steering wheel are au tomatically adjusted to allow the driver to enter and exit the vehicle easily .
117 3-3. Adjusting the seats 3 Operation of each component Y our preferred driving positio n (the position of the driver ’ s seat, steer- ing wheel and outside rear view mir rors) can be recorded and recalled by pressi ng a button. T wo different driving positions can be recorded into memor y .
118 3-3. Adjustin g the seats ■ T o stop the position recall operation p art-way through Perform any of the following: ● Press the “SET” button. ● Press button “1” or “2”. ● Operate any of the seat adjustment switches (only cancels seat position recall).
119 3-3. Adjusting the seats 3 Operation of each component A desired driving position can be recalled lin ked with the unlocking of the door . ■ Registering procedure Record your driving position to button “1 ” or “2” before performing the following: T urn the engine switch off and close the driver ’s door .
120 3-3. Adjustin g the seats H ea d re st rai n t s Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release button. ■ Center seat Up Pull the head restraints up. Down Push the head restraint down while pressing the lock release button.
121 3-3. Adjusting the seats 3 Operation of each component ■ Outer seat To u s e Lift up the head restraint back to the neutral position and then push the head restraint down. To f o l d Lift up the head restraint while pressing the right lock release but- ton, and fold it forward.
122 3-3. Adjustin g the seats ■ Installing the head restraint s Fro nt seats and center rear seat (CrewMax models) Center rea r seat (Double Cab models) Outer rear seat (Double Cab and C.
123 3-3. Adjusting the seats 3 Operation of each component CAUTION ■ Head restraint precautions Observe the following precautions regarding the head restraints. Failure to do so may result in death or serious injury . ● Use the head restraints designed for each respective seat.
124 3-4. Adjusting the steering wheel and mirrors Steering wheel Hold the steering w heel and push the lever down. V e hicles with front be nch type seat Adjust to the ideal position by moving the steering wheel. After adjustment, pull the lever up to secure the steering wheel.
125 3-4. Adjusting the steering wheel and mirrors 3 Operation of each component Operating the switch mo ves the steering wheel in the following direc- tions: Up Down T oward the driver Away from the driver T o sound the ho rn, press on or close to the mark.
126 3-4. Adjusting the steering wheel and mirrors When the key is remo ved from the engine switch, the steering wheel returns to its stowed po sition by moving up and away to enable easier driver e nter and exit. Inserting the key into the engine switch returns the steering wheel to its original position.
127 3-4. Adjusting the steering wheel and mirrors 3 Operation of each component Inside rear view mir r or The height of the rear view mirror c an be adju sted to suit your driving posture. Adjust the height of the rear view mirror by moving it up and down.
128 3-4. Adjusting the steering wheel and mirrors Auto anti-glar e inside rear view mirror Responding to the level of brightness of the headlights of vehicles behind, the reflected light is automatically reduced. Changing automatic anti-glare function mode ON/OFF When the automatic anti-glare function is in ON mode, the indica- tor illuminates.
129 3-4. Adjusting the steering wheel and mirrors 3 Operation of each component CAUTION Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and cause an accident, resulting in death or serious injury .
130 3-4. Adjusting the steering wheel and mirrors Outside re ar view mir r or s Manually adju stable type Adjust the mirror up and down, in or out by pushing the mirror sur- face. Power-a djustable type (type A) T o sele ct a mirror to adjust, press the switch.
131 3-4. Adjusting the steering wheel and mirrors 3 Operation of each component Power-a djustable type (type B) Upper part mirror: T o sele ct a mirror to adjust, press the switch.
132 3-4. Adjusting the steering wheel and mirrors Fro m inside (if equipped) Press the switch to fold the mir- rors. Press it again to extend them to the original position. The mirrors can be manually slid outward to improve visibility around wide trailers.
133 3-4. Adjusting the steering wheel and mirrors 3 Operation of each component ■ Mirror operating conditions ( power-adjust able type) The engine switch is in the “ACC” or “ON” position. ■ When the mirrors are fogg ed up (vehicles with outside rear view mirror defoggers) T urn on the mirror defoggers to defog the mirrors.
134 3-5. Opening, closing the windows and moon roof P ower windo ws The power windows ca n be opened an d closed using the sw itches. Operating the switch moves th e windows as follows: Ty p e A Closing Opening One-touch opening * (driver ’s window only) * : T o stop the window partway , oper- ate the switch in the opposite direc- tion.
135 3-5. Opening, closing the window s and moon roof 3 Operation of each component ■ The power windows can be operated when The engine switch is in the “ON” position.
136 3-5. Opening, closing the windows and moon roof CAUTION Observe the following precautions. Failure to do so may result in death or serious injury . ■ Closing the windows ● The driver is responsible for all the power window operations, including the operation for the passengers.
137 3-5. Opening, closing the window s and moon roof 3 Operation of each component Bac k window Open/close Push the lock release lever and slide the back window . ■ Closing the back window Make sure that the back window is securely closed after closing it.
138 3-5. Opening, closing the windows and moon roof P ower bac k window D ouble Cab models Opening Closing : If equipped Opening and closing 1 2 I n f o r m a t i o n P r o v i d e d b y :.
139 3-5. Opening, closing the window s and moon roof 3 Operation of each component CrewMax mo dels Opening Closing ■ The power back window can be operated when The engine switch is in the “ON” position.
140 3-5. Opening, closing the windows and moon roof CAUTION ■ Closing the back window Observe the following precautions. Failure to do so may result in death or serious injury . ● The driver is responsible for all the power back window operations, includ- ing the operation for the passengers.
141 3-5. Opening, closing the window s and moon roof 3 Operation of each component Moon roof Opens the moon roof * Closes t he moon r oof * * : Lightly press either way of the moon roof switch to stop the moon roof partway .
142 3-5. Opening, closing the windows and moon roof ■ Sunshade The sunshade can be opened and closed manually . However , the sunshade will open automatically when the moon roof is opened. ■ Door lock linked moon roof operation The moon roof can be opened and closed using the key .
143 3-5. Opening, closing the window s and moon roof 3 Operation of each component ■ Moon roof open reminder function The buzzer sounds when the engine switch is turned to the “LOCK” position and the driver ’s door is opened with the moon roof open.
144 3-5. Opening, closing the windows and moon roof I n f o r m a t i o n P r o v i d e d b y :.
145 4 Driving 4-1. Before driving Driving the vehicle ............. 146 Cargo and luggage ........... 153 Vehicle load limits ............. 156 Trailer towing..................... 158 Dinghy towing ................... 178 4-2. Driving procedures Engine (ignition) switch .
146 4-1. Before driving Driving the v ehicle P. 1 7 9 With the brake pe dal depressed, shift the shift lever to D. ( P . 181) Release the parking brake. ( P . 187 ) Gradually release the brake pedal and gently depress the accelera- tor pedal to accelerate the vehicle.
147 4-1. Before driving 4 Driving ■ Driving in the rain ● Drive carefully when it is raining, because visibility will be reduced, the win- dows may become fogged-up, and the road will be slippery . ● Drive carefully when it starts to rain, because th e road surface will be espe- cially slippery .
148 4-1. Before driving CAUTION Observe the following precautions. Failure to do so may result in death or serious injury . ■ When st arting the vehicle Always keep your foot on the brake pedal while stopped with the engine running. This prevents the vehicle from creeping.
149 4-1. Before driving 4 Driving CAUTION Observe the following precautions. Failure to do so may result in death or serious injury . ■ When driving the vehicle ● Do not drive in excess of the speed limit. Even if the legal speed limit per- mits it, do no t drive over 85 mph ( 140 km/h) unless your vehicle has high- speed capability tires.
150 4-1. Before driving CAUTION ■ If you hear a squealing or scraping noise (brake p ad wear limit indica- tors) Have the brake pads checked and replaced by your T oyot a dealer as soon as possible. Rotor damage may result if the pads are not replaced when needed.
151 4-1. Before driving 4 Driving CAUTION ● Do not leave a door or window open if the curved glass is coated with a metallized film such as a silver-colored one. Reflected sunlight may cause the glass to act as a lens, causing a fire. ● Always apply the parking brake, shift the shif t lever to P , stop the engine and lock the vehicle.
152 4-1. Before driving NOTICE ■ When driving the vehicle ● Do not depress the accelerator and brake pedals at the same time during driving, as this may restrain driving torque. ● Do not use the accelerator pedal or depress the accelerator and brake pedals at the same time to hold the vehicle on a hill.
153 4-1. Before driving 4 Driving Car go and lugga ge Cargo capacity depends on the to tal weight of the occupants. (Cargo capacity) = (T otal load capacity) (T otal weight of occupant s) Step s f.
154 4-1. Before driving Cargo capacity T otal load capacity (vehicle capacity weight) ( P . 504) When 2 people with the combined weight of A lb . (kg) are riding in your vehicle, which has a total load capacity (vehicle capacity weight) of B lb. (kg), th e available amount of cargo and luggage load capacity will be C lb.
155 4-1. Before driving 4 Driving CAUTION ■ Things that must not be carried in the luggage comp artment The following things may cause a fire if loade d in the luggage compart- ment: ● Receptacles cont aining gasoline ● Aerosol cans ■ Storage pre cautions Observe the following prec autions.
156 4-1. Before driving V ehicle load limits ◆ T ot al load capacity (vehicle cap ac ity weight): P. 5 0 4 T otal load capacity means the combined weight of occup ants, cargo and luggage.
157 4-1. Before driving 4 Driving CAUTION ■ Overloading the ve hicle Do not overload the vehicle. It may not only cause damage to t he tires, but also degrade ste ering and braking ability , resu lting in an accident.
158 4-1. Before driving T r ailer to wing Contact your T oyota dealer for further informa tion about additional requirements such as a towing kit, etc.
159 4-1. Before driving 4 Driving ■ GCWR (Gross Combination Weight Rating) The maximum allowable gross combination weight. The gross combination weight is the sum of the total vehicle weight (includ.
160 4-1. Before driving ■ TWR (T railer Weight Rating) The maximum allowable gross trailer weight. The gross tra iler weight is the sum of the traile r weight and the weight of th e cargo in the trailer .
161 4-1. Before driving 4 Driving ■ Kingpin W eight The load placed on the 5th wheel mount or the gooseneck ball. ( P . 168) ● The gross trailer weight must never excee d the TWR described in the table. ( P . 162) ● The gross combination weig ht must never exceed the GCWR described in the table.
162 4-1. Before driving Confirm that the gross trailer we ight, gross comb ination weigh t, gross vehicle weight, gross axle weight and tongue weight are all within the limits. ■ GCWR * 5 and TWR * 5 R egular Cab models * 1 : The model code is indicated on the Certification Label.
163 4-1. Before driving 4 Driving D ouble Cab models Model code * 1 Engine Driving system Bed type GCWR TWR UPK51L-CRTSKA 1UR-FE engine 2WD S tan- dard 12500 lb. (5670 kg) 6800 lb. (3080 kg) UPK56L-CRTSKA 4WD 12500 lb. (5670 kg) 6500 lb. (2945 kg) USK51L-CRTSKA 3UR-FE engine 2WD S tandard 14000 lb.
164 4-1. Before driving * 1 : The model code is indicated on the Certification Label. ( P . 510) * 2 : V ehicles without towing package * 3 : V ehicles with towing package * 4 : V ehicles with towing package and large fu el tank USK57L-CHTSKA 3UR-FE engine 4WD Long 14000 lb.
165 4-1. Before driving 4 Driving CrewMax mo dels Model code * 1 Engine Driving system Bed type GCWR TWR UPK51L-PSTSKA 1UR-FE engine 2WD Short 12500 lb. (5670 kg) 6700 lb. (3035 kg) UPK56L-PSTSKA 4WD 12500 lb. (5670 kg) 6400 lb. (2900 kg) USK51L-PSTSKA 3UR-FE engine 2WD Short 14000 lb.
166 4-1. Before driving * 1 : The model code is indicated on the Certification Label. ( P . 510) * 2 : V ehicles without towing package * 3 : V ehicles with towing package * 4 : V ehicles with towing package and large fu el tank ■ Unbraked TWR * 5 1000 lb.
167 4-1. Before driving 4 Driving ● A recommended tong ue weight or kingpin weight varies in accor- dance with the types of trailers or towing as described below . ● T o ensure the re commended values shown below , the tr ailer must be loaded by referring to the following instructions.
168 4-1. Before driving 2.Fifth wheel T owing or Goosene ck T owing The gross trailer weight should be distributed so that the kingpin weight is 19% to 21%.
169 4-1. Before driving 4 Driving The rear b umper of yo ur vehicle is equipped with a hole to install a trailer ball. If you have any ques- tions, contact your T oyota dealer . The gross trailer weight (trailer weight plus cargo weight) when towing with the bumper must never exceed the TWR ( P .
170 4-1. Before driving Hitch receiver pin hole position: 46.4 in. (1 1 79 mm) Use the wire harness stored in the rear end of the vehicle. ■ Service connector for towing brake controller (if equippe.
171 4-1. Before driving 4 Driving Y our vehicle will handle dif ferently when towing a trailer . T o help avoid an accident, death or serio us injury , keep the following in mind wh en towing: ● S peed limits fo r towing a trailer var y by state or province.
172 4-1. Before driving ● Avoid sudden braking as you may skid, resulting in the trailer jack- knifing and a loss of vehicle contro l. This is especially true on wet or slippery surfaces. ● Avoid jerky starts or sudden acceleration. ● Avoid jerky steering and sharp turns, and slow down before making a turn.
173 4-1. Before driving 4 Driving ● Always place wheel blocks under b oth the vehicle’s and the trailer ’s wheels when parking. Apply the pa rking brake firmly , and put the transmission in P . Avoid parking on a slope, but if unavo idable, do so only after performing the followin g: Apply the brakes and keep them applied.
174 4-1. Before driving ■ Before towing Check that the following conditions are met: ● Ensure that your vehicle’s tires are properly inflated. ( P . 517) ● T railer tires are inflated according to the trailer manufacturer’s recommen- dation.
175 4-1. Before driving 4 Driving ■ If trailer sway occurs One or more factors (crosswinds, p assing vehicles, rough roads, etc.) can adversely affect handling of your vehicle and trailer , causing instability . ● If trailer swaying occurs: • Firmly grip the steering wheel.
176 4-1. Before driving CAUTION ■ T o avoid accident or injury ● Do not exceed the TWR, unbraked TWR, GCWR, GVWR or GA WR. ● If the gross trailer weight is over 2000 lb. (907 kg), a sway control device with sufficient cap acity is required. ● If the gross trailer weight is over 5000 lb.
177 4-1. Before driving 4 Driving CAUTION ■ Hitch T railer hitch assemblies have different weight cap acities established by the hitch manufacturer .
178 4-1. Before driving Dinghy towing Y our vehicle is not designed to be dinghy towed (with 4 wheels on the ground) behind a motor home. NOTICE ■ T o avoid serious damage to your vehicle Do not tow your vehicle with the four wheels on the ground.
179 4-2. Driving procedures 4 Driving Engine (ignition) s witch Check that the parking brake is set. Check that the shift lever is set in P . Firmly depress the brake pedal. T urn the engine switch to the “ST ART” position to start the engine. “LOCK” The steering wheel is locked and the key can be removed.
180 4-2. Driving procedures ■ When the steering lock cannot be released ■ Key reminder function A buzzer sounds if the driver’s door is opened while the engine switch is in the “ACC” or “LOCK” position to remind you to remove the key . When starting the engine, the engin e switch may seem stuck in the “LOCK” position.
181 4-2. Driving procedures 4 Driving Automa tic tr ansmission Floor shift type While the engine switch is in th e “ON” position, move the shift lever with the brake pedal depressed. When shifting the shif t lever between P and D, make sure that the vehi- cle is completely stopped.
182 4-2. Driving procedures Column shift type While the engine switch is in th e “ON” position, move the shift lever with the brake pedal depressed. When shifting the shif t lever between P and D, make sure that the vehi- cle is completely stopped.
183 4-2. Driving procedures 4 Driving T o enter S mode , shift the shif t lever to S. Shift ranges can be selected by operating th e shift lever , allowing you to dr ive in the shift range of your choosing. The shift range ca n be se lected by the shift lever .
184 4-2. Driving procedures ■ Shif t ranges and their functions ● Automatically selecting gears bet ween 1 and 6 (6-speed mode ls) or 1 and 5 (5-speed mode ls) accord ing to vehicle spee d and driv- ing conditions. ● Y ou can choose from 6 levels (6 - speed models) or 5 levels (5- speed models) of accelerating force and eng ine braking force.
185 4-2. Driving procedures 4 Driving ■ AI-SHIFT AI-SHIFT automatically selects the suit able gear according to the driver per- formance and driving conditions. AI-SHIFT automatically operates when the shift lever is in the D position. (Shifting the shift lever to the S position cancels the function.
186 4-2. Driving procedures T ur n signal le ver Right turn Lane change to the right (push and hold the lever partway) The right hand signals will flash until you release the lever . Lane change to the left (push and hold the lever partway) The left hand signals will flash until you release the lever .
187 4-2. Driving procedures 4 Driving P ar king br ak e T o set the parking brake, fully depress the parking brake pe dal with your left foot while depress- ing the brake pedal with your right foot. (Depressing the pedal ag ain releases the parking brake.
188 4-3. Operating the lights and wipers Headlight s witc h T urning the end of the lever turns on the lights as follows: (U.S.A.) or (Cana da) Off V ehicles with the d aytime running light system: The daytime running lights turn on.
189 4-3. Operating the lights and wipers 4 Driving With the headlights on, push the lever away from you to turn on the high beams. Pull the lever toward you to the center position to turn the high beams off. Pull the lever toward you and release it to flash the high beams once.
190 4-3. Operating the lights and wipers ■ Daytime running light system (if equipped) ● T o make your vehicle more visible to other drivers, the daytime running lights turn on automatically whenever the engine is started and the parking brake is released.
191 4-3. Operating the lights and wipers 4 Driving F og light s witch (U.S.A.) or (Cana da) T urns the front fog lights off T urns the front fog lights on ■ Fog lights can be used when The headlights are on in low beam. : If equipped The fog light s secure excellent visi bility in difficult driving con- ditions, such as in rain and fog.
192 4-3. Operating the lights and wipers W indshield wiper s and washer Operate the lever as follows to operate the wipers. V e hicles without inter mittent type (U.S.A.) or (Cana da) Off (U.S.A.) or (Cana da) Low speed windshield wiper operation (U.
193 4-3. Operating the lights and wipers 4 Driving V e hicles with intermit tent type (U.S.A.) or (Cana da) Off (U.S.A.) or (Cana da) Intermittent windshield wiper operation (U.S.A.) or (Cana da) Low speed windshield wiper operation (U.S.A.) or (Cana da) High spee d windshie ld wiper operation (U.
194 4-3. Operating the lights and wipers ■ The windshield wipers and washer can be operated when The engine switch is in the “ON” position. ■ If no windshield washer fluid sprays Check that the washer nozzles are not blocked if there is washer fluid in the windshield washer fluid reservoir .
195 4-4. Refueling 4 Driving Opening the fuel tank cap ● Close all the doors and windows, and turn the engine switch to the “LOCK” position. ● Confirm the type of fuel.
196 4-4. Refueling ■ Refueling (Flex-fuel vehicles) Observe the following precautions when switching fuels, in order to maintain starting and driving performance. ● Do not change fuels when the fuel level is 1/4 or less. ● Always add at least 2.
197 4-4. Refueling 4 Driving Open the fuel filler door . T urn the fuel tank cap slowly open, and hang the fu el tank cap on the back of the fuel filler door .
198 4-4. Refueling After refueling, turn the fuel tank cap until you hear a click. Once the cap is released, it will tur n slightly in the op posite direction. Closing the fuel t ank cap CAUTION ■ When replacing the fuel t ank cap Do not use anything but a genuine T oyota fuel t ank cap designed for your vehicle.
199 4-5. Using the driving support systems 4 Driving Cr uise contr ol Use the cruise control to maintain a set speed with out depressing the accelerator pedal. Indicators Cruise control switch Press the “ON-OFF” button to activate the cruise control.
200 4-5. Using the driv ing support systems T o change the set speed, operate the lever until the desired set speed is obtained. Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direc- tion. Large adjustment: Hold the lever in the desired direction.
201 4-5. Using the driving support systems 4 Driving ■ Cruise control can be set when ● The shift lever is in D or range 4 or higher of S has been selected. ● V ehicle speed is above approximately 25 mph (40 km/h). ■ Accelerating after setting the vehicle speed ● The vehicle can be accelerated normally .
202 4-5. Using the driv ing support systems Intuitiv e par king assist ■ T ypes of sensors ■ Intuitive pa rking assist switch T urns the intuitive parki ng assist on/off When on, the indicator light comes on to inform the driver that the system is operational.
203 4-5. Using the driving support systems 4 Driving When the sensor detects an obstacle, the direction of and the ap prox- imate distance to the obst acle ar e displayed and the b uzzer sounds.
204 4-5. Using the driv ing support systems Re ar center sensor ■ When multiple obs t acles are de tected in front and behind the vehicle at the s ame time The buzzer will change in the following manner . ● If an obstacle has been detected within 1.
205 4-5. Using the driving support systems 4 Driving ■ The intuitive p arking assist can be operated when ● Front corner sensors: • The engine switch is in the “ON” position. • The shift lever is in R. • The shift lever is not in P or R and vehicle speed is less than about 6 mph (10 km/h).
206 4-5. Using the driv ing support systems ● The shape of the obst acle may prevent the sensor from detecting it. Pay particular attention to the following obstacles: • Wires, fences, ropes, etc.
207 4-5. Using the driving support systems 4 Driving NOTICE ■ When using intuitive parking assist-sensor In the following situations, the system may not function correctly due to a sensor malfunction, etc. Have the vehicle checked by your T oyota dealer .
208 4-5. Using the driv ing support systems R e ar view monitor system V e hicles with Entune Audio Pl us or Entune Premium Audio (Multimedia system types: P . 2 50) Refer to t he “NA VI GA TION S YSTEM OWNER’S MANUAL”. V e hicles with Entune Audio (Multimedia system types: P .
209 4-5. Using the driving support systems 4 Driving ■ Screen description V ehicle width guide lines The line indicates a guide path when the vehicle is being backed straight up. The displayed width is wider than the actual vehicle width. V ehicle center guide lines These lines indicate the estimated vehicle center on the ground.
210 4-5. Using the driv ing support systems ■ Area displayed on screen The rear vi ew monitor s ystem displays an image of the view from the bumper of the rear area of the vehicle. T o adju st the image on the rear view monitor system screen. ( P .
211 4-5. Using the driving support systems 4 Driving ● Using the camera If the camera lens becomes dirty , it cannot tra nsmit a clear image. If water droplets, snow or mu d adhere to the lens, rinse it with water and wipe with a soft cloth. If the l ens is extremely di rty , was h i t w it h a mild cleanser and rinse.
212 4-5. Using the driv ing support systems ● When the ground behind the ve hi cle slopes down sharply The distance guide lines will appear to be further from the vehicle than the actual dis- tance. Because of this, objects will appear to be closer than they actually are.
213 4-5. Using the driving support systems 4 Driving ● Distance guidelines Visually check the surroundings and the area beh ind the vehi- cle. On the screen, it appears that a truck is parked at point . However , in reality if you back up to point , you will hit the truck.
214 4-5. Using the driv ing support systems ■ If you notice any symptoms If you notice any of the following symptoms, refer to the likely cause and the solution, and re-check. If the symptom is not resolved b y the solution, have the vehicle inspected by your T oyota dealer .
215 4-5. Using the driving support systems 4 Driving CAUTION ■ When using the rear view monitor system The rear view monitor system is a supplemental device intended to assist the driver when backing up. When backing up, be sure to check visually behind and all around the vehicle before proceeding.
216 4-5. Using the driv ing support systems NOTICE ■ How to use the camera ● The rear view monitor system may not operate properly in the following cases. • If the back of the vehicle is hit, the position and mounting angle of the camera may change.
217 4-5. Using the driving support systems 4 Driving BSM (Blind Spot Monitor) The Blind S pot Monitor is a system th at ha s 2 functions; ● The Blind S pot Monitor function Assists the driver in.
218 4-5. Using the driv ing support systems Rear Cross T raffic Alert buzzer (Rear Cross T raffic Alert function only) When a vehicle approaching from the right or left rear of the vehicle is detected, a buzzer sounds from behind the left-hand rear pillar .
219 4-5. Using the driving support systems 4 Driving The Blind S pot Monitor function uses radar sensors to detect vehicles that are traveling in an adjacent lane in the area that is not re flected in the outside rear view mirror (the b lind spot), and advises the driver of the vehicles existence via the out side rear view mirror indicator .
220 4-5. Using the driv ing support systems The area s that veh icles ca n be detected in are outlined below . The range of the detection area extends to: Approximately 1 1.5 ft. (3.5 m) from the side of the vehicle The first 1.6 ft. (0.5 m) from the side of the vehicle is not in the detection area Approximately 9.
221 4-5. Using the driving support systems 4 Driving ■ The Blind Sp ot Monitor function is operational when ● The BSM main switch is set to on. ● V ehicle speed is greater than approximately 25 mph (40 km/h). ■ The Blind Sp ot Monitor function will detect a vehicle when ● A vehicle in an adjacent lane overtakes the vehicle.
222 4-5. Using the driv ing support systems ● Instances of the Blind S pot Monitor function unnecessarily detecting a vehi- cle and/or object may increase under the following conditions: • When there is only a short distance between your vehicle and a guardrail, wall, etc.
223 4-5. Using the driving support systems 4 Driving The area s that veh icles ca n be detected in are outlined below . T o give the driver a more consistent time to react, the buzzer can aler t for faster vehicles from farther away . Example: CAUTION ■ Cautions regarding the use of the system The driver is solely responsible for safe driving.
224 4-5. Using the driv ing support systems ■ The Rear Cross T raffic Alert function is operational when ● The BSM main switch is set to on. ● The shift lever is in R. ● V ehicle speed is less than approximately 5 mph (8 km/h). ● Approaching vehicle speed is between approximately 5 mph (8 km/h) and 18 mph (28 km/h).
225 4-5. Using the driving support systems 4 Driving F our-w heel driv e system Use the front-wheel drive control swit ch to select the following transfer modes: “2WD” (high speed positio n, two-wheel drive) Use this for normal driving on dry hard-surfaced roads.
226 4-5. Using the driv ing support systems ■ Shifting from “2WD” to “4H” Reduce vehicle speed to less than 62 mph (100 km/h). T urn the front-wheel drive control switch to “4H”. The “4HI” indicator will come on. ■ Shifting from “4H” to “2WD” Reduce vehicle speed to less than 62 mph (100 km/h).
227 4-5. Using the driving support systems 4 Driving ■ When the front-wheel drive cont rol switch is shif ted to “4L” VSC is automatically turned off. ■ If the “4HI” indicator flashes The transfer mode may not successfully change. Drive straight ahead while accelerating or decelerating, or drive in reverse.
228 4-5. Using the driv ing support systems A UT O LSD system The system can be used on 2WD models and in 2WD mode on 4WD models. The system is activated when dr iving at a speed u nder 62 mph (100 km/h). The AUTO LSD system w ill be activated with the following two proce- dures.
229 4-5. Using the driving support systems 4 Driving If the rear wheels spin, the slip indicator flashes to indicate that the AUT O LSD system h as con- trolled the spinning of the rear wheels. ■ If the engine is turned off and restarted The AUTO LSD system and the indicators are automatically turned of f.
230 4-5. Using the driv ing support systems Driving assist systems ◆ ABS (Anti-lock Brake System) Helps to prevent wheel lock when the brakes are applied suddenly , or if the brakes are applied whil.
231 4-5. Using the driving support systems 4 Driving The slip indicator light will flash while the TRAC/VSC/A-TRAC/ T railer Sway Control systems are operating. If the vehicle gets stuck in fresh s now or mud, VSC/Trailer Sway Con- trol/TRAC systems may reduce power from the engine to the wh eels.
232 4-5. Using the driv ing support systems ■ AUTO LSD mode S top the ve hicle completely , and press the VSC off switch for more than 3 seconds, when the system is in the TRAC OFF mode. The VSC of f and “AUTO LSD” indicators will come on. The system is in TRAC, VSC, T railer Sway Control off and AUTO LSD on mode.
233 4-5. Using the driving support systems 4 Driving If the vehicle gets stuck in fresh s now or mud, VSC/Trailer Sway Con- trol/A-TRAC systems may reduce power from the engine to the wheels. Y ou may need to turn the system off to enable you to rock the vehicle in order to free it.
234 4-5. Using the driv ing support systems If the vehicle gets stuck in fresh snow or mud, A-TRAC system may reduce power fr om the engine to the wheels. Y ou may need to tu rn the system off to enable you to rock the vehicle in order to free it. S top the ve hicle completely , and press the VSC off switch for more than 3 seconds.
235 4-5. Using the driving support systems 4 Driving ■ If the brake system overheats TRAC or A-TRAC will cease operation, and the slip indicator will change from flashing to being on continuously to alert the driver . S top the v ehicle in a safe place.
236 4-5. Using the driv ing support systems CAUTION ■ Replacing tires Make sure that all tires are of the specified size, brand, tread p attern and total load capacity . In addition, make sure that the tires are inflated to the recommended tire inflation pressure level.
237 4-5. Using the driving support systems 4 Driving T railer br ak e contr oller The trailer brakes can be controlled by the Trailer brake controller via the 7-pin connector .
238 4-5. Using the driv ing support systems T railer brake TYPE selection button T railer brake type can be selected by pressing the trailer brake TYPE selection button on the trailer brake controller . T railer brake TYPE selec- tion button will cycle through electric trailer brake and electric-over- hydraulic trailer brakes.
239 4-5. Using the driving support systems 4 Driving While driving 20 - 25 mph [35 - 40 km/h], fully apply the manual TRAILER BRAKE OUTPUT slider . Adjust the gain settin g, using the GAIN (+/-) selection buttons, to either increase or decrease to just below the point of tra iler wheel lock-up.
240 4-6. Driving tips W inter driving tips ● Use fluids that are appropriate to the prevailing outside tempera- tures. • Engine oil • Engine coolant • W asher fluid ● Have a service technician ins pect the condition of the battery . ● Have the vehicle fitted w ith four snow tires or purchase a set o f tire chains for the rear tir es.
241 4-6. Driving tips 4 Driving Park the vehicle and move the shift lever to P without setting the park- ing brake. The parking brake may fr eeze up, preventing it from being released. If necessary , block the wheels to prev ent inadvertent sliding or creeping.
242 4-6. Driving tips ■ Tire chain inst allation Observe the following precautions when installing and removing chains: ● Install and remove tire chains in a safe location. ● Install tire chains on the rear tires. Do not inst all tire chains on the front tires.
243 4-6. Driving tips 4 Driving NOTICE ■ Repairing or replacing snow tires Request repairs or replacement of snow tires from T oyota dealers or legiti- mate tire retailers. This is because the removal and att achment of snow tires affect s the opera- tion of the tire pressure warning valves and transmitters.
244 4-6. Driving tips Of f-ro ad precautions ● S pecific design characte ristics give it a hig her center of gravity than ordinary passenger cars. This vehi cle design feature causes this type of vehicle to be more likely to rollover . And, utility vehicles have a significantly higher rollover rate than other types of vehicles.
245 4-6. Driving tips 4 Driving When driving your vehicle off-road, please observe the following pre- cautions to ensure your driving enjoyment and to help pr event the clo- sure of areas to off-road vehicles. ● Drive your vehicle only in areas where off-road vehicles are per mit- ted to travel.
246 4-6. Driving tips ■ Additional information for off -road driving For owners in U.S. mainland , Hawaii and Puerto Rico: T o obtain additional information pertaini ng to driving your vehicle of f-road, consult the following organizations.
247 4-6. Driving tips 4 Driving NOTICE ■ T o prevent the water damage T ake all necessary safety measures to ensure that water damage to the engine or other components does not occur . ● W ater entering the engine air intake will cause severe engine damage.
248 5-1. Basic Operations Multimedia system types ... 2 50 Entune Audio .................... 252 USB Port/AUX Port ........... 255 5-2. Setup Setup menu....................... 256 General settings ................ 257 Audio settings ..................
249 5 Multimedia 5-6. Using an external device Listening to an iPod .......... 274 Listening to a USB memory device................ 278 Using the AUX port ........... 282 5-7. Connecting Bluetooth ® Preparations to use wireless communication ........
250 5-1. Basic Operations Multimedia system types Entune Audio P. 2 5 2 Entune Audio Plus Refer to t he “NA VI GA TION S YSTEM OWNER’S MANUAL”.
251 5-1. Basic Operations 5 Multimed ia Entune Pre mium Audio Refer to t he “NA VI GA TION S YSTEM OWNER’S MANUAL”. I n f o r m a t i o n P r o v i d e d b y :.
252 5-1. Basic Operations Entune Audio button Press this button to access the Bluetooth ® hands-free system. ( P . 296) “SETUP” button Press this button to customize the function setting s. ( P . 256) “AUDIO” button Display the “Select Audio Source” screen o r audio control screen.
253 5-1. Basic Operations 5 Multimed ia By touching the screen with your finger , you can control the Audio system, hands-free system, etc. ■ Drag * T ouch the screen with your finger and move the screen to the desired position.
254 5-1. Basic Operations CAUTION ■ Laser product THIS PRODUCT IS A CLASS 1 LASER PRODUCT . USE OF CONTROLS OR ADJUSTMENT S OR PERFORMA NCE OF PROCEDURES OTHER THAN THOSE SPECIFIE D HEREIN MA Y RESUL T IN HAZARDOUS RADIA TION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REP AIR BY YOURSELF .
255 5-1. Basic Operations 5 Multimed ia USB P or t/A UX P or t ■ iPod Open the cover and conne ct an iPod using an iPod cable. T urn on the power of the iPod if it is not turned on. ■ USB memory Open the cover and connect the USB memory device. T urn on the power of the USB memory device if it is not turned on.
256 5-2. Setup Setup menu Press the “SETUP” button to display the “Setup” screen. Select to adjust the sett ings for operation s ounds, scr een ani- mation, etc. ( P . 257 ) Select to set the voice settings. ( P . 261) Select to adjust the sett ings for contrast and brightness of the screen.
257 5-2. Setup 5 Multimed ia General settings Press the “SETUP” button. Select “General” on the “Setup” screen. Select to adjust the clock. ( P . 258) “English”, “Français” or “Español” can be selected. On/off c an be selected to sound beeps.
258 5-2. Setup Select “Clock” on the “General Settings” screen. Adjust the time, then select “OK”. Select “Delete Personal Data” on the “General Settings” screen. Select “Delete”. Check carefully beforehand, as data cannot be retrieved once deleted.
259 5-2. Setup 5 Multimed ia Audio settings Press the “SETUP” button. Select “Audio” on the “Setup” screen. Select the number of radio preset stations. Select to display the cover art. Select “High”, “Middle”, “Low” or “Off”.
260 5-2. Setup Display settings Press the “SETUP” button. Select “Display” on the “Setup” screen. Adjust general screen con- trast/brightness Adjust camera screen con- trast/brightness Changes to day mode. Select “G eneral” or “Camera ” on the “D isplay S ettings” s creen.
261 5-2. Setup 5 Multimed ia V oice settings Adjust the voice guidance vol- ume setting. Set the voice recognitio n prompts “High”, “Low” or “Off”. Set the train vo ice recogni tion. Set the voice prompt interrupt on/off. V oice recognition tutorial This screen is used for guidance for voice command systems setting.
262 5-3. Using the audio system Basic audio oper a tions T urn this knob to select radio st ation bands, tracks and files. Also the knob can be used to select items in the list display . Press the “ ” or “ ” button to seek up or down for a radio station, or to access a de sired track or file.
263 5-3. Using the audio system 5 Multimed ia Selecting the audio source Press the “AUDIO” button. Select “Source” on the audio contro l screen or press the “AUDIO” button again. Select the desired audio source. ■ Reordering the audio source Select “Reorder”.
264 5-3. Using the audio system “ List screen oper ation : Select to scrol l to the next or previous page. : If appears to the right of titles, the complete titles are too long for the display .
265 5-3. Using the audio system 5 Multimed ia ■ Selecting a track/file/song Press the “ ” or “ ” button on “SEEK/TR ACK” or turn the “TUNE·SCROLL” knob to select the desired track/file/so ng number . T o fast-forward or reverse, press and hold the “ ” or “ ” button on “SEEK/TRACK”.
266 5-3. Using the audio system Sound settings Select “Sound” on the audio control screen to adjust the sound set- tings. Select “-” or “+” to adjust the treble, mid or bass to a level between -5 and 5. Select “Front” or “Rear” to adjust the front/rear audio balance.
267 5-4. Using the radio 5 Multimed ia Radio operation “Select Audio Source” screen appears Preset stations Select to display RBDS text message Scanning for receivable station Select to display a list of receiv- able stations Setting the sound ( P .
268 5-4. Using the radio Search for desired stations by turning the “TUN E·SCROLL” knob or pressing the “ ” or “ ” butto n on “SEEK/TRAC K”. Select “(add new)” T o change the preset station to a dif ferent one, select and hold the preset station.
269 5-5. Playing an audio CD and MP3/WMA/AAC discs 5 Multimed ia CD player operation “Select Audio Source” screen appears Audio CD: Displaying the track list ( P . 265) MP3/WMA/AAC: Displaying the folder list ( P . 265) Random playback Repeat play Pause Select to resume play Setting the sound ( P .
270 5-5. Playing an audio CD and MP3/WMA/AAC discs ■ Discs that can be used Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc fea- tures, or due to scratches, dirt or deterioration. CDs with copy-protection features may not play correctly .
271 5-5. Playing an audio CD and MP3/WMA/AAC discs 5 Multimed ia ● WMA file compatibility • Compatible st andards WMA V er . 7, 8, 9 • Compatible sampling frequencies 32, 44.1, 48 (kHz) • Compatible bit rates (only comp atible with 2-channel playback) V er .
272 5-5. Playing an audio CD and MP3/WMA/AAC discs ● ID3, WMA and AAC tags ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 V er . 1.0, 1.1, and V er . 2.2, 2.3 ID3 tags.
273 5-5. Playing an audio CD and MP3/WMA/AAC discs 5 Multimed ia NOTICE ■ Discs and adapters that cannot be used Do not use the following types of CDs. Also, do not use 3 in. (8 cm) CD adapters, Dual Discs or printable discs. Doing so may damage the CD player and/or the CD insert/eject function.
274 5-6. Using an extern al device Listening to an iP od P. 2 5 5 “Select Audio Source” screen appears Displays cover art Selecting the pl ay mode Shuf fle play Repeat play Pause Select to resume playback Setting the sound ( P . 266) Select “Browse” on the “iPod” screen.
275 5-6. Using an external device 5 Multimed ia ■ About iPod ● “Made for iPod”, “Made for iPhone” and “Made for iPad” mean that an elec- tronic accessory has been designed to connect specifically to iPod or iPhone, or iPad, respectively , and has been certified by the developer to meet Apple performance standards.
276 5-6. Using an extern al device ■ iPod problems T o resolve most problems encountered when using your iPod, disconnect your iPod from the vehicle iPod connection and reset it. For instructions on how to reset your iPod, refer to your iPod Owner ’s Manual.
277 5-6. Using an external device 5 Multimed ia ■ Compatible models The following iPod ® , iPod nano ® , iPod classic ® , iPod touch ® and iPhone ® devices can be used with this system.
278 5-6. Using an extern al device Listening to a USB memor y de vice P. 2 5 5 “Select Audio Source” screen appears Displaying the folder list ( P . 265) Random playback Repeat play Pause Select to resume playback Setting the sound ( P .
279 5-6. Using an external device 5 Multimed ia ■ USB memory ● Compatible devices USB memory device that can be used for MP3, WMA and AAC playback. ● Compatible device formats The following device format can be used: • USB communication format: USB2.
280 5-6. Using an extern al device ● AAC file compatibility • Compatible st andards MPEG4/AAC -LC • Compatible sampling frequencies 1 1.025/12/16/22.
281 5-6. Using an external device 5 Multimed ia CAUTION ■ While driving Do not connect a USB memory device or operate the device controls. NOTICE ■ T o prevent damage to the USB memory device or it s terminals ● Do not leave the USB memory device in the vehicle.
282 5-6. Using an extern al device Using the A UX por t P. 2 5 5 ■ Operating portable audio players co nnected to the multimedi a system The volume can be adjusted using the vehicle’s audio controls. All other adjustments must be made on the port able audio player itself.
283 5-7. Connecting Bluetooth ® 5 Multimed ia Prepar ations to use wireless communica- tion ■ About Bluetooth ® ■ Certification FCC ID: ACJ932YEAP01A446 IC: 216J-YEAP01A466 For vehicles sold in the U.S.A. This device complies with Part 15 of the FCC Rules.
284 5-7. Connecting Bluetooth ® The latest original “DECLARA TION of CONFORMITY” (DoC) is available at the address stated. http://www .ptc.panasonic.
285 5-7. Connecting Bluetooth ® 5 Multimed ia CAUTION ■ FCC W ARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user ’s authority to operate the equipment.
286 5-7. Connecting Bluetooth ® T o displa y the screen shown belo w , press the “SETUP” button and select “Blu etooth” on the “S etup” s creen. Select to connect the device to be used with multimedia sys- tem. ( P . 291) Select to register a Bluetooth ® device to be used with multime- dia system.
287 5-7. Connecting Bluetooth ® 5 Multimed ia R e gistering a Bluetooth ® audio play er fo r the fir st time T urn the Bluetooth ® connection setting of your a udio player on. This function is not available when the Bluetooth ® connection setting of your audio player is set to off.
288 5-7. Connecting Bluetooth ® R e gistering a Bluetooth ® phone fo r the fir st time T urn the Bluetooth ® connection se tting of your cellular phone o n. Press the button. Select “OK” to register a phone. Follow the steps in “How to registering a Blue tooth ® device” from “STEP 2” ( P .
289 5-7. Connecting Bluetooth ® 5 Multimed ia R e gistering a Bluetooth ® de vice Display the “B luetooth Se tup” screen. ( P . 286) Select “Add”. When this screen is displayed, search for the device name dis- played on this screen on the screen of your Bluetooth ® device.
290 5-7. Connecting Bluetooth ® Select “OK” when the connection status changes from “Connect- ing...” to “Connected”. If an error message is displayed, follow the guidance on the screen to try again. Registration can be performed from screens other than the “Bluetooth Setup” screen.
291 5-7. Connecting Bluetooth ® 5 Multimed ia Connecting a Bluetooth ® de vice Press the “SETUP” button. Select “Bluetooth” on the “Setup” scre en. Select the device to be con- nected. Supported profile icons will be dis- played. Phone Audio player Supported profile icons for cur- rently connected devices will illumi- nate.
292 5-7. Connecting Bluetooth ® When auto connection has failed or “Blue tooth Power” is turned off, you must connec t the Bluetooth ® device manually .
293 5-7. Connecting Bluetooth ® 5 Multimed ia Displaying a Bluetooth ® de vice details Display the “B luetooth Se tup” screen. ( P . 286) Select the device. Select “Device Info”. Following screen is displayed: Device name Change connection method ( P .
294 5-7. Connecting Bluetooth ® Detailed Bluetooth ® system settings Display the “B luetooth Se tup” screen. ( P . 286) Select “System Settings”. The following screen is displayed: Bluetooth ® power on/o ff Y ou can change Bluetooth ® function on/off Bluetooth ® name Change PIN-code ( P .
295 5-8. Bluetooth ® audio 5 Multimed ia Listening to Bluetooth ® audio Some titles and controls may not be displayed depending on the type of portable audio player used.
296 5-9. Bluetooth ® phone Using a Bluetooth ® phone T o displa y the screen shown below , press th e switch on the steer- ing wheel or press the button. Several functions are available to oper ate on each screen that is dis- played by selecting th e 4 tabs.
297 5-9. Bluetooth ® phone 5 Multimed ia ■ Microphone The vehicle’s built in micro- phone is used when talking on the phone. The person you are speaking to can be heard from the front speakers. T o use the hands-free system, you must r egister your Bluetooth ® phone in the system.
298 5-9. Bluetooth ® phone Making a call Display the phone screen. ( P . 296) Select the “Dial Pad” tab and enter a phone number . T o delete the input phone number , select . For the first digit, you can enter “+” by selecting “ ” for a while.
299 5-9. Bluetooth ® phone 5 Multimed ia When “Automatic Con tact/Hist ory T ransfer” is set to off Select the “Contacts” t ab. Select the desired item. Select to transfer new con- tacts from a cellular phone, select “Always” and then enable “Automatic T rans- fer”.
300 5-9. Bluetooth ® phone Y ou can make a call using numbers registered in the con tact. Display the phone screen. ( P . 296) Select “Favorites” tab. Select the desired number to make a call. Y ou can make a call using the call history , which has the 3 function s below .
301 5-9. Bluetooth ® phone 5 Multimed ia R e ceiving a call Press the switch on the steer- ing wheel or select . Press the switch on the steering wheel or se lect . T urn the “PWR·VOL” knob. ■ International calls Received international calls may not be displayed correctly depending on the cellular phone in use.
302 5-9. Bluetooth ® phone Speaking on the phone Select “-” or “+”. Y o u can also adjust the volume using th e volume knob. Select “Mute”. When using phone services such as an answering service or a bank, you can store phone numbers and code numbers in the contact.
303 5-9. Bluetooth ® phone 5 Multimed ia ■ Release T ones ● A continuous tone signal is a character string that consist s of numbers and the characters “p” or “w”. (e.g.056133w0123p#1 ) ● When the “p” pause tone is used, the tone dat a up until the next p ause tone will be automatically sent after 2 seconds have elapsed.
304 5-9. Bluetooth ® phone When a call is interrupted by a th ird party while talking, an incoming call message will be displayed. T o talk with the other party: Press the switch on the steer- ing wheel or select . T o refuse the call: Press the switch on the steer- ing wheel or select .
305 5-9. Bluetooth ® phone 5 Multimed ia Bluetooth ® phone message function Press the switch on the steering wheel or pre ss the button. Select on the phone screen. Check that the “Mess age Inbox” screen is displayed. When an e-mail/SMS/MMS is receiv ed, the incoming message screen pops up with sound and is ready to be operated on the screen.
306 5-9. Bluetooth ® phone ■ Receiving a message ● Depending on the cellular phone used for receiving messages, or its regis- tration status with the navigation system, some information may n ot be dis- played.
307 5-9. Bluetooth ® phone 5 Multimed ia ■ Check the messages ● Depending on the type of Bluetooth ® phone being connected, it may be nec- essary to perform additional steps on the phone. ● Messages are displayed in the appropriate connected Bluetooth ® phone’s registered mail address folder .
308 5-9. Bluetooth ® phone Calls can be made to an e-mail/SMS/MMS message sender ’s phone number . Display the “Message Inbox” screen. ( P .
309 5-9. Bluetooth ® phone 5 Multimed ia Using the steering wheel switc hes Off hook switch • Make a call • Recei ve a call • Display “Phone” screen On hook switch • End a call • Refuse a call : If equipped The steering wheel switches can be used to operate a connected cellular phone.
310 5-9. Bluetooth ® phone Bluetooth ® phone settings T o display the screen show n below , press the “SETUP” button, a nd select “Phone” on the “Setup” screen. Set the phone connection ( P . 291) Sound Settings ( P . 31 1) Contact/Call History Settings ( P .
311 5-9. Bluetooth ® phone 5 Multimed ia Display the “Phone/Message Settings” screen. ( P . 3 10) Select “Sound Settings” on the “Phone/Message Settings” screen. Set the desired ringtone. Adjust the ringtone volume . Adjust the message readout volume.
312 5-9. Bluetooth ® phone Contact/Call Histor y Settings The contact can be trans ferred from a Bluetooth ® phone to the sys- tem. The contact also c an be added, edited and deleted. The call history can be d eleted and contact and favorites can be changed.
313 5-9. Bluetooth ® phone 5 Multimed ia Operation methods differ be tween PBAP compatible and PBAP incompatible but OPP comp atible Bluetooth ® phones. If your cellular phone is neither PBAP nor OPP comp atible, the con- tacts cannot be transferred.
314 5-9. Bluetooth ® phone ■ Updating the cont acts in a different way (From the “Call His- tory” screen) For PBAP compatible Bluetooth ® phones, this function is available when “Automatic Contact/Histor y T r ansfer” is set to off. ( P .
315 5-9. Bluetooth ® phone 5 Multimed ia For PBAP compat ible Bluetooth ® phones, this functi on is available when “Automatic Contact/Histor y T r ansfer” is set to off. ( P . 312) Select “Edit Contact”. Select the desired contact. Select icon corresponding to the desired name or number .
316 5-9. Bluetooth ® phone For PBAP compat ible Bluetooth ® phones, this functi on is available when “Automatic Contact/Histor y T r ansfer” is set to off. ( P . 312) Select “Delete Contacts”. Select the desired contact and select “Delete”.
317 5-9. Bluetooth ® phone 5 Multimed ia Wh en 15 contact s have already been registered to the favorites list When 15 contacts have already been registered to the favo rites list, a registered co ntact needs to be replaced. Select “Y es” when the co nfirmation screen ap pears to replace a contact.
318 5-9. Bluetooth ® phone ■ Deleting the contact s in the fav orites list Select “Remove Favorite”. Select the desired contacts and select “Remove”. Select “Y es” when the confirmation screen appears. Check that a confirmation scr een is displaye d when the opera- tion is complete .
319 5-9. Bluetooth ® phone 5 Multimed ia Display the “Phone/Message Settings” screen. ( P . 3 10) Select “Messaging Settings”. Select the desired item to be set. Set automa tic message transfer on/off. Set automa tic message readout on/off.
320 5-9. Bluetooth ® phone ■ Displaying the “Messaging Settings” screen in a different way Display the phone screen. ( P . 296) Select . Select “Settings”. Display the “Phone/Message Settings” screen. ( P . 3 10) Select “Phone Display Settings”.
321 5-9. Bluetooth ® phone 5 Multimed ia W hat to do if ... (T roubleshooting) If there is a problem with the hands-free system or a Bluetooth ® device, first check the table below . Wh en using the hands-free syst em with a Bluetooth® device The hands-free system or Bluetooth ® device does not work.
322 5-9. Bluetooth ® phone Wh en registering/connecting a cellular phone Wh en making/receiving a call A cellular phone cannot be registered. An incorrect passcode was entered on the cellular phone. Ente r the correct p asscode on the cellular phone.
323 5-9. Bluetooth ® phone 5 Multimed ia Wh en using the contacts Wh en using the Bluetooth ® message function Contact dat a cannot be transferred manually/automatically . The profile version of the connected cellular phone may not be compatible with transferring contact dat a.
324 5-9. Bluetooth ® phone In other situation s Even though all conceivable measures have been t aken, the symptom st a- tus does not change. The cellular phone is not close enough to this system. Bring the cellular phone closer to this system.
325 5-10. Using the voice command system 5 Multimed ia V oice command system Press the talk switch. T o cancel the voice command sys- tem, press and hold the talk switch. After a beep sounds, say the desired command. On the list screen, you can select the desired command.
326 5-10. Using the voice command system Due to natural languag e speech recognition technolog y , this system enables recognition of a command when spoken naturally .
327 5-11. Bluetooth ® 5 Multimed ia Bluetooth ® ■ When using the Bluetooth ® audio system ● In the following conditions, the system may not function.
328 5-11. Bluetooth ® ■ Bluetooth ® antenna The antenna is built into the display . If the portable audio player is behind the seat or in the glove box or console box, or is touching or covered by metal object s, the c onnection st atus may deteriorate.
329 5-11. Bluetooth ® 5 Multimed ia ■ Compatible models The Bluetooth ® audio system supports portable audio players with the follow- ing specifications ● Bluetooth ® specifications: V er . 2.0, or higher (Recommended: V er . 3.0+EDR or higher) ● Profiles: • A2DP (Advanced Audio Distribution Profile) V er .
330 5-11. Bluetooth ® ■ Reconnecting the portable audio pl ayer If the portable audio player is disconnected due to poor reception when the engine switch is in the “ACC” or “ON” position, the system automatically reconnects the port able audio player .
331 5-11. Bluetooth ® 5 Multimed ia NOTICE ■ When leaving the vehicle Do not leave your portable audio player or cellular phone in the vehicle. The inside of the vehicle may become hot, causing damage to the portable audio player or cellular phone.
332 5-12. Antenna Antenna Place the included wrench around the antenna. When not in use, the wrench is stored in glove box. Loosen the antenna with the wrench and remove it. T ighten the antenna by one hand until it will not turn any more. Using the wrench, tighten the antenna an a dditional 1/8th turn (20 to 45 degrees) to secure it in place.
333 5-12. Antenna 5 Multimed ia ■ About the wrench After using the included wrench, store it in the glove box for safekeeping. NOTICE ■ T o avoid damaging the antenna Remove the antenna in the following situations. ● When using an automatic carwash.
334 5-12. Antenna I n f o r m a t i o n P r o v i d e d b y :.
335 6 Interior features 6-1. Using the air conditioning system Manual air conditioning system............................. 336 Automatic air conditioning system............................. 343 Seat heaters/ seat ventilators ................ 350 6-2. Using the interior lights Interior lights list .
336 6-1. Using the air conditioning system Manual air conditioning system ■ Adjusting the temperature setting T o adjust the temperature set- ting, turn the temperature con - trol dial clockwise (warm) or counterclockwise (cool). If is not pressed, the system will blow ambient tem- perature air or heated air .
337 6-1. Using the air conditionin g system 6 Interior features ■ Fan speed setting T o adjust th e fan speed, turn the fan speed control dial clock- wise (increase) or counterclock- wise (decrease). T urning the dial to “OFF” turns off the fan.
338 6-1. Using the air conditioning system ■ Switching between out side air and recirculated air modes Press . The mode switches between outside air mode (introduces air from outside the vehicle) (indicator off) and recirculated air mode (recy- cles air inside the vehicle) (in dicator on) each time the button is pressed.
339 6-1. Using the air conditionin g system 6 Interior features ■ Windshield wiper de-icer (if equipped) This feature is used to prevent ice from building up on the wind- shield and wiper blades. Press or . The defogger will automatically turn of f after approximately 15 minutes.
340 6-1. Using the air conditioning system Open the vent Close the vent Rear (C rewMax models) Direct air flow to the left or right, up or down. T urn the knob to open or close the vent.
341 6-1. Using the air conditionin g system 6 Interior features ■ Fogging up of the windows ● The windows will easily fog up when the humi dity in the vehicle is high. T urning on will dehumidify the air from the outlets and defog the windshield effectively .
342 6-1. Using the air conditioning system CAUTION ■ T o prevent the windshield from fogging up ● Do not use during cool air operation in extremely humid weather . The difference betwee n the temperature of the out side air and that of the wind- shield can cause the outer surface of the windshield to fog up, blocking your vision.
343 6-1. Using the air conditionin g system 6 Interior features Automa tic air conditioning system ■ Adjusting the temperature setting T o adjust the temperature set- ting, turn the temperature con - trol dial clockwise (warm) or counterclockwise (cool).
344 6-1. Using the air conditioning system ■ Change the airflow mode T o change the airflow , press . Air outlets are adjusted each time the button is pressed. ■ Other functions ● Switching between outside air and recirculated air modes ( P .
345 6-1. Using the air conditionin g system 6 Interior features ■ Switching between out side air and recirculated air modes Press . The mode switches between outside air mode (introduces air from outside the vehicle) (indicator off) and recirculated air mode (recy- cles air inside the vehicle) (in dicator on) each time the button is pressed.
346 6-1. Using the air conditioning system ■ Windshield wiper de-icer (if equipped) This feature is used to prevent ice from building up on the wind- shield and wiper blades. Press or . The defogger will automatically turn of f after approximately 15 minutes.
347 6-1. Using the air conditionin g system 6 Interior features Open the vent Close the vent Rear (C rewMax models) Direct air flow to the left or right, up or down.
348 6-1. Using the air conditioning system ■ Using automatic mode Fan speed is adjusted automatically according to the temperature setting and the ambient conditions. Therefore, the fan may stop for a while until warm or cool air is ready to flow immediately after is pressed.
349 6-1. Using the air conditionin g system 6 Interior features ■ Air conditioning filter P . 430 CAUTION ■ T o prevent the windshield from fogging up ● Do not use during cool air operation in extremely humid weather .
350 6-1. Using the air conditioning system Sea t hea ter s /seat v entilators T urns the seat heater on Hi Mid Lo Off The level indicator lights come on. Press the “ ” on the button to up and “ ” to down, and off. ■ Seat heater T urns the seat heater on Hi Mid Lo Off The level indicator lights come on.
351 6-1. Using the air conditionin g system 6 Interior features ■ Seat ventilators Blows air from the seat Hi Mid Lo Off The level indicator lights come on. Pressing the button changes modes in the following: Hi Mid Lo Off ■ The seat heaters/seat ventilators can be used when The engine switch is in the “ON” position.
352 6-1. Using the air conditioning system NOTICE ■ T o prevent damage to the seat heaters/seat ventilators Do not put heavy objects that have an uneven surface on the seat and do not stick sharp objects (needles, nails, etc.
353 6-2. Using the interior lights 6 Interior features Interior li ghts list Outer foot lights (if equipped) Personal/interior light s ( P . 35 4) Engine switch light (if equipped) Foot well lighting (if equip ped) Cargo lamp ( P .
354 6-2. Using the interior lights “OFF” The personal/interior lights can be individually turned on or off. “DOOR” The personal/interior light s come on when a door is opened. They turn off when the doors are closed. “ON” The personal/interior lights cannot be individually turned of f.
355 6-2. Using the interior lights 6 Interior features Ty p e B On/off “OFF” The cargo lamp can be individually turned on or off. “DOOR” The cargo lamp comes on when a door is opened. They turn off when the doors are closed. “ON” The cargo lamp cannot be individually turned off.
356 6-3. Using the storage features List of stor age fea tures Fro nt sep arated type seats Bottle holders ( P . 368) Card holder ( P . 360) Overhead console ( P . 365) Glove box ( P . 358) Front cup holders ( P . 366) Console box ( P .
357 6-3. Using the storage features 6 Interior features Front be nch type seat Auxiliary boxes ( P . 369) • Card holder ( P . 360) • Map holder ( P . 362) • T issue pocket ( P . 364) Bottle holders ( P . 36 8) Card holder ( P .
358 6-3. Using the storage features Open (pull the lever up) Lock Unlock CAUTION ■ Items that should not be lef t in the storage sp aces Do not leave glasses, lighters or spray cans in the storage s.
359 6-3. Using the storage features 6 Interior features Pull the knob up and lift the lid ■ Passing a cable from the console box Console box (front se p arated type seat) I n f o r m a t i o n P r o.
360 6-3. Using the storage features ■ Overhead console ■ Console box (front sep arated type seats) Pull the knob up and lift the lid Card holder I n f o r m a t i o n P r o v i d e d b y :.
361 6-3. Using the storage features 6 Interior features ■ Back of the front center seatback (front bench type seat) Pull the lever up and fold down the seatback Push the knob and lift the lid 1 2 I .
362 6-3. Using the storage features Pull the lever up and fold down the seatback Push the knob and lift the lid Map holder (front bench type seat) 1 2 I n f o r m a t i o n P r o v i d e d b y :.
363 6-3. Using the storage features 6 Interior features Fro nt sep arated type seats Pull the knob up and lift the lid Front be nch type seat Pull the lever up and fold down the seatback Pen h.
364 6-3. Using the storage features Fro nt sep arated type seats Pull the knob up and lift the lid Front be nch type seat Pull the lever up and fold down the seatback Tissue pocket 1 I n f o r.
365 6-3. Using the storage features 6 Interior features Push the knob and lift the lid The overhead console is useful for tempo rarily storing sunglasses and similar small items.
366 6-3. Using the storage features ■ Front Separated type seats Bench type seat Pull the lever up and fold down the seatback Cup hol ders I n f o r m a t i o n P r o v i d e d b y :.
367 6-3. Using the storage features 6 Interior features ■ Rear Double Ca b models with front separated type seats Pull the lid down Double Ca b models with front bench type seat Pull the lid.
368 6-3. Using the storage features Front do or Rear do or (CrewMax models) Bottle holders CAUTION ■ Items unsuit able for the bottle holders Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury .
369 6-3. Using the storage features 6 Interior features Ty p e A Pull the strap Ty p e B Pull the lever up and fold down the seatback Push the knob and lift the lid Auxiliary boxes (front benc.
370 6-3. Using the storage features Ty p e C Pull the lever up and fold down the seatback Push the knob and lift the lid 1 2 I n f o r m a t i o n P r o v i d e d b y :.
371 6-3. Using the storage features 6 Interior features ■ Using the storage box Pull the lever up and r aise the rear seat cushion Open the lid T urn the knob in the “OPEN” direction Lift the li.
372 6-3. Using the storage features Remove the storage box Remove the lids T urn the knobs counterclock- wise Remove the storage box 3 1 2 3 CAUTION ■ T o prevent damage to the storage box Do not put heavy loads on the lids.
373 6-3. Using the storage features 6 Interior features Lugga ge compar tment f ea tures Deck hooks are provided for securing loose items. Deck hooks I n f o r m a t i o n P r o v i d e d b y :.
374 6-4. Other interior features Other interior fe atures T o set the visor in the forward position, flip it down. T o set the visor in the side posi- tion, flip down, unhook, and swing it to the side. T o use the side extender , place the visor in the s ide positio n, then slide it backward.
375 6-4. Other interior features 6 Interior features The clock is displayed on the screen. ■ Setting the clock V e hicles with Entune Audio (Multimedia system types: P . 250) P. 2 5 8 V e hicles with Entune Audio Pl us or Entune Premium Audio (Multimedia system types: P .
376 6-4. Other interior features ■ The out side temperature is displayed when The engine switch is in the “ON” position. ■ Display In the following situations, the correct outside temperature .
377 6-4. Other interior features 6 Interior features Please use as a power supply for el ectronic goods that u se less than 12 VDC/10 A (power consumption of 120 W). When using electronic goods, make su re th at the power consumption of all the connected power outlets is less than 120 W .
378 6-4. Other interior features T y pe C (back of the front center seatback) Open the lid. T y pe D (inside of the console box) Pull the knob up and lift the lid, and open the lid.
379 6-4. Other interior features 6 Interior features T y pe F (back of the console box) Open the lid. ■ The power outlet s can be used when The engine switch is in the “ACC” or “ON” position. ■ Passing a cable from the console box (type D) P .
380 6-4. Other interior features An assist grip (type A) installed on the ceiling can be used to support your body while si tting on the seat. An assist grip (type B) installed on the pillar can be used when getting in or out of the vehicle and others.
381 6-4. Other interior features 6 Interior features Gara ge door opener The garage door opener (HomeLink ® Universal T ransceiver) is manu- factured under license from HomeLink ® . The HomeLi nk ® compatible transceiver in your vehicle h as 3 buttons which can be programmed to operate 3 different devices.
382 6-4. Other interior features ■ Programming HomeLink ® Point the remote control transmitter for the de vice 1 to 3 in. (25 to 75 mm) from the HomeLink ® buttons. Keep the HomeLink ® indicator light in view while programming. Press and hold on e of the HomeLink ® buttons and the transmitter butt on.
383 6-4. Other interior features 6 Interior features T est the HomeLink ® opera- tion by pressing the newly programmed button. If a HomeLink ® button has been programmed for a garage door , check to see if the garage door opens and closes. If the garage door does not operate, see if your garage transmitter is of the rolling code type.
384 6-4. Other interior features Press and hold the vehicle’s programmed HomeLink ® button for 2 seconds and release it. Repe at this step once aga in. The garage door may o pen. If the garage door opens, the programming process is complete. If the door does not open, press and release the button a third time.
385 6-4. Other interior features 6 Interior features Press the appropria te HomeLink ® button. The HomeLink ® indicator light should come on. The HomeLink ® compatible transceiver in your vehicle continues to send a signal for up to 20 seconds as long as the button is pressed.
386 6-4. Other interior features ■ Before programming ● Install a new battery in the remote control transmitter . ● The battery side of the remote control transmitter must be pointed away from the HomeLink ® button. ■ Certification for the garage door opener For vehicle s sold in the U.
387 6-4. Other interior features 6 Interior features Compass T o turn the co mpass on or of f, press the switch. : If equipped The comp ass on the inside rear view mirror indicates the direc- tion in which the vehicle is heading.
388 6-4. Other interior features The direction display deviates fr om the true direction d etermined by the earth’s magnetic field. The amoun t of deviation varies according to the geographic position of the vehicle. If you cross over a map boundary shown in illustration, the compass will deviate.
389 6-4. Other interior features 6 Interior features ■ Circling calibrat ion When “C” appears o n the dis- play , dr ive the vehicle at 5 mph (8 km/h) or less in a circle until a direction is displayed. If there is not enough space to drive in a circle, drive around the block until the direction is dis- played.
390 6-4. Other interior features NOTICE ■ T o avoid the comp ass malfunctions Do not place magnets or any metal object s near the inside rear view mirror .
391 7 Maintenance and care 7-1. Maintenance and care Cleaning and protecting the vehicle exterior .......... 392 Cleaning and protecting the vehicle interior ........... 394 7-2. Maintenance Maintenance requirements ................... 397 General maintenance .
392 7-1. Maintenance and care Cleaning and pr otecting the v ehicle e xterior ● Working from top to bottom, liber ally apply water to the vehicle body , wheel wells and underside of the vehicle to remove any dirt and dust. ● W ash the vehicle body using a spong e or soft cloth, such as a chamois.
393 7-1. Maintenance and care 7 Maintenance and care CAUTION ■ When washing the vehicle Do not apply water to the inside of the engine compartment. Doing so ma y cause the electrical components, etc., to catch fire. ■ Precautions regarding the exhaust pipe Exhaust gases cause the exhaust pipe to become quite hot.
394 7-1. Maintenance and care Cleaning and protecting t he v ehicle interior Remove dirt a nd dust using a vacuum cleaner . Wipe dirty surfaces with a cloth dampened with lukewarm water . ● Remove dirt and dust using a vacuum cleaner . ● Wipe off any excess dirt and dust with a soft cloth dampened with diluted deter gent.
395 7-1. Maintenance and care 7 Maintenance and care ■ Caring for leather areas T oyota recommends cleaning the interior of the vehicle at least twice a year to maintain the quality of the vehicle’ s interior . ■ Shampooing the carpet s There are several commercial foaming-type cleaners available.
396 7-1. Maintenance and care NOTICE ■ Cleaning detergents ● Do not use the following types of detergent, as they may discolor the vehi- cle interior or cause streaks or damage to painted surfaces.
397 7-2. Maintenance 7 Maintenance and care Maintenance requir ements General maintenance sh ould be performed on a daily basis. This can be done by you rself or by a T oyota dealer . Scheduled maintenance shou ld be performed at spec ified intervals according to the maintenance schedule.
398 7-2. Maintenance ■ Resetting the message indicating mainte nance is required (U.S.A. only) After the required maintenance is performed according to the maintenance schedule, please reset the message. T o reset the data, follow the procedure described below: T urn the engine switch off with the trip meter “A” reading shown.
399 7-2. Maintenance 7 Maintenance and care General maintenance Listed below are the general maintenance items that should be performed at the i ntervals sp ecified in the “Owne r ’ s W arranty Information Booklet” or “Own er ’ s Manual S upplement/Sched- uled Maintenance Guide”.
400 7-2. Maintenance V ehicle interior Items Check points Accelerator pedal • The accelerator pedal should move smoothly (without uneven pedal effort or catching).
401 7-2. Maintenance 7 Maintenance and care V ehicle exterior Items Check points Doors • Do the doors operate smoothly? Engine hood • Does the engine hood lock system wo rk prop- erly? Fluid le aks • There should not be any signs of fluid leakage after the vehicle has been parked.
402 7-2. Maintenance Emission inspection an d maintenance (I/M) pr og rams The OBD system determin es that a problem exists somewhere in the emission control system. Y our vehicl e may not pass the I/M test and may need to be repaired. Cont act your T oyota dealer to service the vehicle.
403 7-3. Do-it-yourself maintenance 7 Maintenance and care Do-it-yo ur self ser vice pr ecautions If you perform maintenance by yourself, be sure to follow the correct procedur e as given in these se ctions. Items Parts and tools Battery condition ( P .
404 7-3. Do-it-yourself maintenance CAUTION The engine compartment contains many mechanisms and fluids that may move suddenly , become hot, or become electrically energized.
405 7-3. Do-it-yourself maintenance 7 Maintenance and care Hood Pull the hood lock release leve r . The hood will pop up slightly . Pull up the auxiliary catch lever and lift the hood. Release the lock from the inside of the vehicle to open the hood. 1 2 CAUTION ■ Pre-driving check Check that the hood is fully closed and locked.
406 7-3. Do-it-yourself maintenance Engine compar tment W asher fluid tank ( P . 415 ) Engine oil level dipstick ( P . 407) Engine c oolant re servoi r ( P . 409) Engine oil filler cap ( P . 408) Brake flui d reser voir ( P. 4 1 1 ) Fuse box ( P .
407 7-3. Do-it-yourself maintenance 7 Maintenance and care With the engine at operating temperature and turned off, check the oil level on the dipstick. ■ Checking the engine oil Park the vehicle on level ground. After warming up the en gine and turning it off, wait more than 5 minutes for the oil to drain back into the bottom of the engine.
408 7-3. Do-it-yourself maintenance ■ Adding engine oil Make sure to check the oil type an d prepare the items needed before adding oil. Remove the oil filler cap by turning it counterclockwise. Add engine oil slowly , checking the dipstick. Install the oil filler cap by turning it clockwise.
409 7-3. Do-it-yourself maintenance 7 Maintenance and care The coolant level is satisfactory if it is between the “FULL” and “LOW” lines on the reservoir when the engine is cold. Reservoir c ap “FULL” line “LOW” line If the level is on or below the “LOW” line, add coolant up to the “FULL” line.
410 7-3. Do-it-yourself maintenance ■ Coolant selection Only use “T oyota Super Long Life Coolant” or a similar high quality ethylene glycol based non-silicate, non-amine, non-nitrite, and non-borate c oolant with long-life hybrid organic acid technology .
411 7-3. Do-it-yourself maintenance 7 Maintenance and care Check the radiator and conde nser and clear away any foreign objects. If either of the above parts is ex tremely dirty or you are not sure o f their condition, have yo ur vehicle inspected by your T oyota dealer .
412 7-3. Do-it-yourself maintenance ■ Fluid level The fluid level should be within the appro priate range. Full (when cold) Add fluid (when cold) Full (when hot) Add fluid (when hot) Hot: V ehicle has been driven around 50 mph (80 km/h) for 20 minutes, or slightly longer in frigid temperatures.
413 7-3. Do-it-yourself maintenance 7 Maintenance and care ■ Checking the fluid level Make sure to check the fluid type and prepare the necessary items. Clean all dirt off the reservoir . Remove the cap by turn ing it counterclockwise. Wipe the dipstick clean.
414 7-3. Do-it-yourself maintenance ■ Before recharging When recharging, the battery produces hydrogen gas which is flammable and explosive. Therefore, observe the following before recharging: ● If recharging with the battery installed on the vehicle, be sure to disconnect the ground cable.
415 7-3. Do-it-yourself maintenance 7 Maintenance and care Add washer fluid in the following situations: ● A washer does not work. ● The warning message appears on the displa y . NOTICE ■ When recharging the battery Never recharge the battery while the engine is running.
416 7-3. Do-it-yourself maintenance Tires New tread T readwear indicato r Worn tread The location of treadwear indica- tors is shown by the “TWI” or “ ” marks, etc., molded on the side- wall of each tire. Check spare tire condition and pressure if not rot ated.
417 7-3. Do-it-yourself maintenance 7 Maintenance and care Y our vehicle is equipped with a tire p ressure warning system that uses tire pressure warning va lves and tr ansmitters to detect low tir e infla- tion pressure before serious proble ms arise.
418 7-3. Do-it-yourself maintenance ■ How to initialize the tire pressure warning system Park the vehicle in a safe place and turn the engine switch off. Initialization cannot be perform ed while the ve hicle is moving. Adjust the tire inflation pressure to the specified cold tire inflation pressure level.
419 7-3. Do-it-yourself maintenance 7 Maintenance and care ■ When to replace your vehicle ’ s tires T ires should be replaced if: ● Y ou have tire damage such as cut s, splits, cracks deep enoug.
420 7-3. Do-it-yourself maintenance ■ Tir e t yp e s ● Summer tires Summer tires are high -speed performance tires best suited to highway driving under dry conditions. Since summer tires do not have the same traction performance as snow tires, summer tires a re inadequate for driving on snow-covered or icy ro a ds.
421 7-3. Do-it-yourself maintenance 7 Maintenance and care ● Performance may be af fected in the following situati ons. • Near a TV tower , electric power plant, gas st ation, radio sta tion, larg.
422 7-3. Do-it-yourself maintenance ■ Tire pressure wa rning system certification FCC ID: GQ4-45T FCC ID: GQ4-37R For vehicles sold in the U.S.A.
423 7-3. Do-it-yourself maintenance 7 Maintenance and care NOTICE ■ Rep airing or replacing tires , wheel s, tire pressure warning valves, transmitters and tire valve cap s ● When removing or fitt.
424 7-3. Do-it-yourself maintenance Tire inflation pressur e The recommended cold tire infla- tion pressure and tire size are dis- played on the tire and load ing information label.
425 7-3. Do-it-yourself maintenance 7 Maintenance and care Ti r e v a l v e T ire pressure gauge Remove the tire valve cap. Press the tip of the tire pres sure gauge onto the tir e valve. Read the pressure usi ng the gauge gradations. If the tire inflation pressure is not at the recommended level, adjust the pressure.
426 7-3. Do-it-yourself maintenance ■ Instructions for checking tire inflation pressure When checking tire inflation pressu re, observe the following: ● Check only when the tires are cold. If your vehicle has been parked for at least 3 hours or has not been driven for more than 1 mile or 1.
427 7-3. Do-it-yourself maintenance 7 Maintenance and care Wh e e l s When replacing wheels, care sho uld be taken to ensure that they are equivalent to those removed in loa d capacity , diameter , rim width and inset * . Replacement wheels are available at your T o yota dealer .
428 7-3. Do-it-yourself maintenance ■ When replacing wheels The wheels of your vehicle are equipped with tir e pressure warnin g valves and transmitters that allow the tire pressure warning system to provide adva nce warning in the ev ent of a loss in tire in flation pressure.
429 7-3. Do-it-yourself maintenance 7 Maintenance and care NOTICE ■ Replacing tire pressur e warning valves and transmitters ● Because tire repair or replacement may af fect the tire pressure warn - ing valves and transmitters, make sure to have tires serviced by your T oyota dealer or other q ualified service shop .
430 7-3. Do-it-yourself maintenance Air conditioning filter T urn the engine switch off. Open the glove box. Remove the tray . Remove the cove r by sliding up while pulling toward you. The air conditioning filter must be changed regularly to maint ain air conditioning efficiency .
431 7-3. Do-it-yourself maintenance 7 Maintenance and care Remove the filter cover . Pull the filter out of the filter out- let. Remove the air con ditioning filter and replace it with a new one. The “ UP” marks shown on the fil- ter should be pointing up.
432 7-3. Do-it-yourself maintenance NOTICE ■ When using the ai r conditioning system Make sure that a filter is always installed. Using the air conditioning system without a filter may cause damage to the system.
433 7-3. Do-it-yourself maintenance 7 Maintenance and care W ir eless r emote control batter y Lithium battery CR2032 Remove the co ver using a coin protected with tape, etc. Remove the depleted battery . Insert a new battery with the “+” terminal facing up.
434 7-3. Do-it-yourself maintenance ■ Use a CR2032 lithium battery ● Batteries can be purchased at your T oyota dealer , local electrical appliance shops or camera stores. ● Replace only with the same or equivalent type recommended by the manu- facturer .
435 7-3. Do-it-yourself maintenance 7 Maintenance and care Checking and replacing fuses T urn the engine switch off. Open the fuse box cover . Engine compartment Push the tab in and lift the cover off. Under the instrument panel Remove the c over .
436 7-3. Do-it-yourself maintenance Check if the fuse is blown. Normal fuse Blown fuse T ype A and B: Replace the blown fuse with a new fuse of an appropriate amperage rat- ing. The amperage rating can be found on the fuse box cover . T ype C: Contact your T oyota dealer .
437 7-3. Do-it-yourself maintenance 7 Maintenance and care CAUTION ■ T o prevent system breakdowns and vehicle fire Observe the following precautions. Failure to do so may cause damage to the vehicle, and possibly a fire or injury . ● Never use a fuse of a higher amperage rating than that indicated, or use any other object in place of a fuse.
438 7-3. Do-it-yourself maintenance Light bulbs Check the wattage of the light bulb to be replaced. ( P . 519) ■ Front Y ou may replace the following bulbs by yourself. The difficulty level of replacement varies de pending on the bulb. If necessary bulb replacement seems difficult to perform, cont act your T oy- ota dealer .
439 7-3. Do-it-yourself maintenance 7 Maintenance and care ■ Rear S top/tail and rear side marker lights Back up lights Rear turn signal lights License plate lights High mounted stoplight and cargo .
440 7-3. Do-it-yourself maintenance ■ Headlight s T o allow enou gh working spac e, turn th e steeri ng wheel to the oppo site side of the bulb to be replaced.
441 7-3. Do-it-yourself maintenance 7 Maintenance and care Remove the rubbe r cover . Release the bulb retaining spring. Remove the bulb. Set the new light bu lb.
442 7-3. Do-it-yourself maintenance Install the bulb ret aining spring. Install the rubber cover . When installing the rubber cover: P . 452 Install the connector .
443 7-3. Do-it-yourself maintenance 7 Maintenance and care Reinstall the fender liner an d install the screws and clips. ■ Front turn signal/p arking light s (bulb type)/daytime running light s (if equipped on bulb type) T urn the bulb base counter- clockwis e.
444 7-3. Do-it-yourself maintenance ■ Front side marker light s T o allow enou gh working spac e, turn th e steeri ng wheel to the oppo site side of the bulb to be replaced.
445 7-3. Do-it-yourself maintenance 7 Maintenance and care Remove the light bulb. Reinstall the fender liner an d install the screws and clips. 3 4 I n f o r m a t i o n P r o v i d e d b y :.
446 7-3. Do-it-yourself maintenance ■ Front fog light s (if equipped) T o allow enou gh working spac e, turn th e steeri ng wheel to the oppo site side of the bulb to be replaced.
447 7-3. Do-it-yourself maintenance 7 Maintenance and care T urn the bulb counterclock- wise. Set the new light bu lb. Align the 3 tabs on the light bulb with the mounting, and insert.
448 7-3. Do-it-yourself maintenance Reinstall the fender liner an d install the clip s. 6 I n f o r m a t i o n P r o v i d e d b y :.
449 7-3. Do-it-yourself maintenance 7 Maintenance and care ■ Stop/t ail and rear side marker lights, back-up light s and rear turn signal light s Remove the bolt s and rear combination assembly . T urn the bulb bases counter- clockwis e. Rear turn signal light Back-up light S top/tail and re ar side marker light Remove the light bulb.
450 7-3. Do-it-yourself maintenance ■ License plate lights T urn the bulb base counter- clockwis e. Remove the light bulb. 1 2 I n f o r m a t i o n P r o v i d e d b y :.
451 7-3. Do-it-yourself maintenance 7 Maintenance and care ■ High mounted stoplight and cargo lamp s Remove the screw s and cover . Remove the light bulb. High mounted stoplight Cargo lamps When reinstalling the outer lens, confirm that the packing is prop- erly seated in the groove on the housing.
452 7-3. Do-it-yourself maintenance ■ When installing the rubbe r cover of the headlight Ensure the rubber cover is securely attached. ■ When replacing the light bulbs Confirm that they are properly engaged with the bulb base and that there is no light leakage.
453 7-3. Do-it-yourself maintenance 7 Maintenance and care CAUTION ■ Replacing light bulbs ● T urn off the light s. Do not attempt to replace the bulb immediately after turning off the light s. The bulbs become very hot and may cause burns. ● Do not touch the glass portion of the light bulb with bare hands.
454 7-3. Do-it-yourself maintenance I n f o r m a t i o n P r o v i d e d b y :.
455 8 When trouble arises 8-1. Essential information Emergency flashers .......... 456 If your vehicle has to be stopped in an emergency ................. 457 8-2. Steps to take in an emergency If your vehicle needs to be towed .......................
456 8-1. Essential information Emer genc y flasher s Press the switch. All the turn signal lights will flash. T o turn them off, press the switch once again. ■ Emergency flashers If the emergency flashers are used for a long time while the engine is not operating, the battery may discharge.
457 8 When trouble arises 8-1. Essential information If y our v ehic le has to be stopped in an emer gency S teadily step on the brake pedal wi th both feet and firmly depress it. Do not pump the brake pedal repeatedly as this will increase the effort required to slow the vehicle.
458 8-2. Steps to take in an emergency If y our v ehicle needs to be to wed The following may indicate a pro blem with your transmission. Contact your T oyota dealer or commercial towing service befor e towing. ● The engine is running but the vehicle will not move.
459 8-2. Steps to take in an emergency 8 When trouble arises From the rear Use a towing dolly under the fr ont wheels. If your T oyota is transported by a flatbed truck, it should be tied down at the locations shown in the illustration. If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45 .
460 8-2. Steps to take in an emergency If a tow truck is not available in an emergency , your vehicle may be temporarily towed using a cable or chain secured to the emergency towing eyelets. This should only be attempted on hard surfaced roads for short distances at low speeds.
461 8-2. Steps to take in an emergency 8 When trouble arises CAUTION Observe the following precautions. Failure to do so may result in death or serious injury . ■ When towing the vehicle 2WD models: Be sure to transport the vehicle with all four wheels raised off the ground.
462 8-2. Steps to take in an emergency NOTICE ■ T o prevent damage to the vehicle when towing using a wheel-lif t type truck ● Do not tow the vehicle from the rear when the engine switch is in the “LOCK” position or the key is removed. The steering lock mechanism is not strong enough to hold the front wheels straight.
463 8 When trouble arises 8-2. Steps to take in an emergency If y ou think something is wrong ● Fluid leaks under the vehicle. (W ater dripping from the air co nditioning after use is normal.) ● Flat-looking tires or uneven tire wear ● Engine coolant tempera ture gauge needle continua lly points higher than normal.
464 8-2. Steps to take in an emergency Fuel pump shut of f system Follow the procedure below to restart the engine after the system is activated. T urn the engine switch to the “ACC” or “LOCK” position.
465 8 When trouble arises 8-2. Steps to take in an emergency If a war n ing light tur ns on or a war ning buzzer sounds Calmly perform the following acti ons if any of the warning light s comes on or flashes. If a light comes on or flashes, but then goes off, this does not ne cessarily indicate a malfunction in the system.
466 8-2. Steps to take in an emergency (U.S.A.) (Canada) ABS warning light Indicates a malfunction in: • The ABS; or • The brake assist system Have the vehicle inspected by your T oyot a dealer immediately . Open door warning light (warn ing buzzer) * 2 Indicates that one or more of the doors is not fully closed.
467 8-2. Steps to take in an emergency 8 When trouble arises * 1 : Parking brake engaged warning buzzer: A buzzer will sound if the vehicle is driven at a speed of approximately 3 mph (5 km/h) or more. * 2 : Open door warning buzzer: A buzzer will sound if the vehicle reaches a speed of 3 mph (5 km/h) or more with any door open.
468 8-2. Steps to take in an emergency * 3 : Driver ’s seat belt buzzer: The driver ’s seat belt buzzer sounds to alert th e driver that his or her seat belt is not fastened. Once the engine switch is turned to the “ON” or “ST ART” position mode, the buzzer sounds for 6 seconds.
469 8-2. Steps to take in an emergency 8 When trouble arises ■ When the tire pres sure warning light comes on Check the tire inflation pressur e and adjust to the appropriate le vel. Push- ing the tire pressu re warning reset switch will not turn of f the tire pressure warning light.
470 8-2. Steps to take in an emergency CAUTION ■ If both the ABS and the brake system warning light s remain on S top your vehicle in a safe place immediately and contact your T oyota dealer .
471 8-2. Steps to take in an emergency 8 When trouble arises CAUTION Please note that the TPMS (tire pres sure war ning system) is not a sub- stitute for proper ti re maintenance, and it is the driver.
472 8-2. Steps to take in an emergency If a war ning mess age is displayed Master war ning light The master warning light also comes on or flashes in order to indicate that a message is cur- rently being displayed on the multi- information display .
473 8-2. Steps to take in an emergency 8 When trouble arises (If equipp ed) Indicates a malfunction in the Blind S pot Mon- itor A buzzer also sounds. Have the vehicle inspected by your T oyot a dealer immediately . Indicates that one or more of the doors is not fully closed The system also indicates which doors are not fully closed.
474 8-2. Steps to take in an emergency (If equipp ed) Indicates that intuitive p arking assist is dirty or covered with ice Clean the sensor . (If equipp ed) Indicates that the Blind Spot Monitor sensors or the surrounding area on the bumper is dirty or covered with ice A buzzer also sounds.
475 8-2. Steps to take in an emergency 8 When trouble arises * : Refer to the separate “Scheduled Maintenance Guide” or “Owner ’s Manual Supplement” for the maintenance interval applicable to your vehicle.
476 8-2. Steps to take in an emergency If y ou hav e a flat tire ● S top the vehicle on a hard, flat surface . ● Set the p arking brake . ● Shift the shif t lever to P . ● S top the engine. ● T urn on the emergency flash ers. ( P . 456) Y our vehicle is equipped with a spare tire.
477 8-2. Steps to take in an emergency 8 When trouble arises ■ Spare ti re ■ Jack and tools Jack T ool bag Location of the sp are tire, jack and tools 1 2 R egular Cab models Double Cab mo.
478 8-2. Steps to take in an emergency CAUTION ■ Using the tire jac k Observe the following precaution s. Improper use of the t ire jack may ca use the vehicle to suddenly f all off the jack, leading to d eath or serious injury . ● Do not use the tire jack for any purpose other than replacing tires or installing and removing tire chains.
479 8-2. Steps to take in an emergency 8 When trouble arises Pull the lever and fold d own the seatback. Remove the c over . Unhook the rubber ba nd and remove the tool bag.
480 8-2. Steps to take in an emergency Pull up the lever an d raise the bottom cushion up. On vehicles with sto rage box, turn the knob to the “OPEN” direction and remove the lid. On vehicles with sto rage box, remove the jack co ver panel. Unhook the rubber ba nd and take out the jack.
481 8-2. Steps to take in an emergency 8 When trouble arises Unhook the rubber ba nd and remove the tool bag. Pull the lever and raise the bot- tom cushion up. Unhook the rubber ba nd and take out the jack. For loosening For tightening Unhook the rubber ba nd and remove the tool bag.
482 8-2. Steps to take in an emergency 9 Assemble the jack handle extension as shown. Insert the end of the jack han- dle extension into the lowering screw and turn it counterclock- wise. After the tire is lowered com- pletely to the ground, remove the holding bracket.
483 8-2. Steps to take in an emergency 8 When trouble arises Chock the tires. On some models, remove the wheel ornament using the wheel nut wrench as shown. T o p rotect the wh eel and whee l ornament, place a rag between the wrench and the wheel or na- ment, as shown in the illustration.
484 8-2. Steps to take in an emergency Assemble the jack handle extension as shown. Position the jack at the corr ect jack point as shown. Front Rear Make sure the jack is positioned on a level and solid place. Raise the vehicle until the tire is slightly raised off the ground.
485 8-2. Steps to take in an emergency 8 When trouble arises Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact su rface, the wheel nut s may loosen while the vehicle is in motion, causing th e tire to come off.
486 8-2. Steps to take in an emergency Install the sp are tire and loosely tighten each wheel nut by hand by approximately the same amount. T ighten the nuts until the tapered portion comes into loose contact with the disc wheel seat. Lower the vehicle.
487 8-2. Steps to take in an emergency 8 When trouble arises V ehicles with aluminum wheels: Remove the center wheel orna- ment by pushing from the rever se side. Lay down the tire with the valve stem facing up and install the holding bracket centered in the wheel opening.
488 8-2. Steps to take in an emergency Keep winding until three clicks are heard. It is not possible to overtighten. T o confirm it is not loose after tightening: Push and pull the tire Tr y r o t a t i n g Visu ally check to ensure tire is not hung on surr ounding pa rts.
489 8-2. Steps to take in an emergency 8 When trouble arises CAUTION ■ When using the temporary s pa re tire ● Remember that the temporary spare tir e provided is specifically designed for use with your vehicle. Do not use your te mporary spare tire on another vehicle.
490 8-2. Steps to take in an emergency NOTICE ■ Do not drive the vehicle with a flat ti re Do not continue driving with a flat tire. Driving even a short di stance with a fl at tire can damage the tir e and the wheel beyond rep air . ■ Driving with tire chains and th e temporary sp are tire Do not fit tire chains to the temporary spare tire.
491 8 When trouble arises 8-2. Steps to take in an emergency If the engine will not star t One of the following may be the cause of the proble m: ● There may not be sufficient fuel in the vehicle’s t ank. Refuel the vehicle. Flex-fuel vehicles: The type of fu el ma y be different.
492 8-2. Steps to take in an emergency If the shift le v er cannot be shifted fr om P Set the p arking brake . T urn the engine switch to the “ACC” position. Depress the brake pedal. Pry the cover up with a flathead screwdriver or equivalent tool.
493 8-2. Steps to take in an emergency 8 When trouble arises Press the shift lock override button. The shift lever can be shifted while the button is pressed.
494 8-2. Steps to take in an emergency If the v ehic le batter y is dischar ged If you have a set of jumper (or booster) ca bles and a second vehicle with a 12-volt battery , you can jump start your vehicle by following the steps below . Open the hood.
495 8-2. Steps to take in an emergency 8 When trouble arises S tart the engine of the second vehicle . Increase the engine speed slightly and maintain at that le vel for approximately 5 minutes to recharge the ba tter y of your vehicle. Maintain the engine speed of t he second vehicle and start the engine of your vehicle.
496 8-2. Steps to take in an emergency CAUTION ■ A voiding battery fires or explosions Observe the following precautions to prevent accidentally igniting the flam- mable gas that may be emitted from.
497 8 When trouble arises 8-2. Steps to take in an emergency If y our v ehicle o v erheats ● The needle of the engine coolant temperature gauge ( P. 8 8 ) enters the re d zone or a loss of eng ine power is exp erienced. (For example, the vehicle sp eed does no t increase.
498 8-2. Steps to take in an emergency Add coolant if necessary . W ater can be used in an emer- gency if coolant is unavailable. S tart the engine to check that the r adiator cooling fan oper ates and to check for coolant leaks fro m the radiator or hoses.
499 8 When trouble arises 8-2. Steps to take in an emergency If the v ehic le becomes stuck S top the engine. Set the parking brake and shift the shift lever to P . Remove the mud, snow or sand from around the rear whee ls. Place wood, stones or some other material to help provide traction under the rear wheels.
500 8-2. Steps to take in an emergency I n f o r m a t i o n P r o v i d e d b y :.
501 9 Vehicle specifications 9-1. Specifications Maintenance data (fuel, oil level, etc.) .......... 502 Fuel information ................ 520 Tire information ................. 524 9-2. Customization Customizable features ...... 534 9-3. Items to initialize Items to initialize .
502 9-1. Specifications Maintenance da ta (fuel, oil le vel, etc.) 2W D models * 1 : Unladen vehicle * 2 : P255/70R18 tires * 3 : P275/65R18 tires * 4 : P275/55R20 tires Dimensions Cab type Regular Cab Double Cab CrewMax Bed type Long S tandard Long Short Overall length 228.
503 9-1. Specifications 9 Vehicle specific ations 4W D models * 1 : Unladen vehicle * 2 : P255/70R18 tires * 3 : P275/65R18 tires * 4 : P275/55R20 tires Cab type Regular Cab Double Cab CrewMax Bed type Long S tandard Long Short Overall length 228.
504 9-1. Specifications R egular Cab models * 1 : The model code is indicated on the Certification Label. ( P . 510) * 2 : V ehicles with towing package * 3 : V ehicles with towing package and.
505 9-1. Specifications 9 Vehicle specific ations D ouble Cab models Model code * 1 Engine Driving system Bed type V ehicle capacity weight (Occupant s + luggage) UPK51L-CRTSKA 1UR-FE engine 2WD S tandard 1405 lb. (635 kg) UPK56L-CRTSKA 4WD 1315 lb.
506 9-1. Specifications * 1 : The model code is indicated on the Certification Label. ( P . 510) * 2 : V ehicles with towing package * 3 : V ehicles with towing package and large fuel t ank Model code * 1 Engine Driving system Bed type V ehicle capacity weight (Occupant s + luggage) USK56L-CRTSGA 3UR-FBE engine 4WD S tandard 1495 lb.
507 9-1. Specifications 9 Vehicle specific ations CrewMax mo dels Model code * 1 Engine Driving system Bed type V ehicle capacity weight (Occupant s + luggage) UPK51L-PSTSKA 1UR-FE engine 2WD Short 1355 lb. (610 kg) 1320 lb. (595 kg) * 2 UPK56L-PSTSKA 4WD 1255 lb.
508 9-1. Specifications USK56L-PSTSKA 3UR-FE engine 4WD Short 1435 lb. (650 kg) 1400 lb. (635 kg) * 2 1360 lb. (615 kg) * 3 1240 lb. (560 kg) * 4 1325 lb. (600 kg) * 5 1205 lb. (545 kg) * 6 USK56L-PSTLKA 1405 lb. (635 kg) 1370 lb. (620 kg) * 2 1335 lb.
509 9-1. Specifications 9 Vehicle specific ations * 1 : The model code is indicated on the Certification Label. ( P . 510) * 2 : V ehicles with electric moon roof * 3 : V ehicles with towing packa.
510 9-1. Specifications ■ V ehicle identification number The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your T oy- ota. It is used in registering the ownership of your veh icle.
511 9-1. Specifications 9 Vehicle specific ations Engine Model 1UR-FE, 3UR-FE, 3UR-FBE Ty p e 8-cylinder V -type, 4-cycle, gasoline Bore and stroke 1UR-FE engine 3.70 3.27 in. (94.0 83.0 mm) 3UR-FE and 3UR-FBE engines 3.70 4.02 in.
512 9-1. Specifications * : The engine oil capacity is a reference quantity to be used when changing the engine oil. W arm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick. Lubrication system Oil capacity (Drain and refill - reference * ) With filter Without filter 7.
513 9-1. Specifications 9 Vehicle specific ations ■ Engine oil selection “T oyota Genuine Motor Oil” is used in your T o yota vehicle. Use T oy- ota approved “T o yota Genuine Motor Oil” or equivalent to satisfy the following grade a nd viscosity .
514 9-1. Specifications Cooling system Capacity 1UR-FE engine V ehicles without towing package 1 1.4 qt. (10.8 L, 9.5 Imp.qt.) V ehicles with towing package 12.6 qt. (1 1.9 L, 10.5 Imp.qt.) 3UR-FE, 3UR-FBE engines V ehicles without towing package 1 1.
515 9-1. Specifications 9 Vehicle specific ations * : Y our T oyota vehicle is filled with “T oyota Genuine Dif ferential Gear Oil” at the factory . Use T oyota approved “T oyota Genuine Differential Gear Oil” or an equivalent oil of matching quality to satisfy the above specification.
516 9-1. Specifications * : The fluid capacity is the quantity of reference. If replacement is necessary , contact your T oyota dealer . Automatic transmis sion Fluid capac- ity * 1UR-FE engine 2WD models 1 1.6 qt. (1 1.0 L, 9.7 Imp.qt.) 4WD models 1 1.
517 9-1. Specifications 9 Vehicle specific ations * 1 : Minimum pedal clearance when depress ed with a force of 1 10 lbf (490 N, 50 kgf) with the engine running. * 2 : Parking brake pedal travel when depressed with a force of 67.1 lbf (300 N, 30.6 kgf).
518 9-1. Specifications Ty p e B Ty p e C T ire size P275/65R18 1 14T T ire inflation pressure (Recommended cold tire inflation pressure) Front tires: 30 psi (210 kPa, 2.1 kgf/cm 2 or bar) Rear ti res: 33 psi (230 kPa, 2.3 kgf/cm 2 or bar) S pare tire: 33 psi (230 kPa, 2.
519 9-1. Specifications 9 Vehicle specific ations * 1 : If equipped * 2 : Bulb type only A: HB2 halogen bulbs B: H16 halogen bulbs C: Wedge base bulbs (amber) D: Wedge base bulbs (clear) E: Double end bulbs Light bulbs Light Bulb s Bulb No.
520 9-1. Specifications Fuel info r mation ■ Fuel tank opening for unl eaded gasoline T o help prevent incorrect fueling, your vehicle has a fuel tank opening that only accommodates the special nozzle on unleaded fuel pumps. ■ Fuel quality In very few cases, driveability problems may be caused by the brand of fuel you are using.
521 9-1. Specifications 9 Vehicle specific ations ■ Gasoline quality standards ● Automotive manufacturers in the U.S.A., Europe and Japan have developed a specification for fuel quality called the World-Wide Fuel Charter (WWFC), which is expected to be applied worldwide.
522 9-1. Specifications ■ Non-recommendation of the use of blended gasoline (gasoline engine) ● If you use gasohol in your vehicle, be sure that it has an octane rating no lower than 87. ● T oyota does not recommend the use of gasolin e containing methanol.
523 9-1. Specifications 9 Vehicle specific ations NOTICE ■ Notice on fuel quality ● Do not use improper fuels. If improper fuels are used, the engine will be damaged. ● Do not use leaded gasoline. Leaded gasoline can cause damage to your vehicle’s three-way cat alytic converters causing the emission control system to malfunction.
524 9-1. Specifications Tire infor mation T ire size ( P . 525) DOT and T ire Identification Number (TIN) ( P . 525) Location of treadwear indicators ( P . 416) T ire ply composition and mate rials Plies are layers of rubber-coated p a rallel cords.
525 9-1. Specifications 9 Vehicle specific ations DOT symbol * T ire Identification Number (TIN) T ire manufacturer’s identifica- tion mark T ire size code Manufactu rer ’s o ptional tire type cod.
526 9-1. Specifications ■ Tire dimensions Section wid th T ire height Wheel diameter Bead Sidewall Shoulder T read Belt Inner liner Reinforcing rubber Carcass Rim lines Bead wires Chafer 1 2 3 Tire .
527 9-1. Specifications 9 Vehicle specific ations This information has been prepared in accordance with regu lations issued by th e Nationa l Highway T r affi c Safety Administration of the U.
528 9-1. Specifications ■ T emperature A, B, C The temperatur e grades are A (the hi ghest), B, and C, representing the tire’s resist ance to the generation of heat and its ability to dissi- pate heat when tested under cont r olled conditions on a specified indoor laboratory test whee l.
529 9-1. Specifications 9 Vehicle specific ations Glossary of tire terminology T ire related term Meaning Cold tire inflation pres- sure T ire pressure when the vehicle has been parked fo r three hours or mor e, or has not been driven more than 1 mile or 1.
530 9-1. Specifications Rim A metal support for a tire or a tire and tube assembly upon which the tire beads are seated Rim diameter (Wheel diame ter) Nominal diameter of the bead seat Rim size design.
531 9-1. Specifications 9 Vehicle specific ations Cord separation The parting of cor ds from adjacent rubber compou nds Cracking Any parting within th e tread, sidewa ll, or inner- liner of the tire e.
532 9-1. Specifications Open splice Any parting at any junction of tread, sidewall, or innerliner that extends to cord material Outer diamet er The overall diameter of an inflated new tire Overall wid.
533 9-1. Specifications 9 Vehicle specific ations * : T abl e 1 Occupa nt loading and di stribution for vehicle normal lo ad for various designated seating capacities Snow tire A tire that attains.
534 9-2. Customization Customizable fea tur es ■ Changing by using the multimedia system Press the “SETUP” or “APPS” button. Entune Audio Plus or Entun e Premium Audio: Select “Setup” on the “Apps” screen. Select “V ehicle” on th e “Setup” screen.
535 9-2. Customization 9 Vehicle specific ations Select the setting to be changed. Change each setting. For items that can be enabled/d isabled, and for items with an operating time that can be changed, select “On” or “ Of f”, or select the desired operating time.
536 9-2. Customization ■ Wireless remote control * ( P . 101) * : If equipped ■ Moon roof * ( P . 141) * : If equipped Function Default setting Customized setting Wireless remote control O.
537 9-2. Customization 9 Vehicle specific ations ■ Automati c light off syst em * ( P . 188) * : If equipped ■ Multi-information dis play ( P . 92) * : V ehicles with navigation system ■ Illumination ( P . 353) ■ Seat Belt Reminder Buz zer ( P .
538 9-2. Customization ■ V ehicle customization ● When the speed-detecting automatic door lock function and shift position linked door locking function (shifting gears to a position other than P locks all doors) are both on, the door lock operates as follows.
539 9-3. Items to initialize 9 Vehicle specific ations Items to initialize The following items must be init ialized for normal system opera- tion after such cases as the battery being reconnected, or .
540 9-3. Items to initialize I n f o r m a t i o n P r o v i d e d b y :.
541 10 For owners Reporting safety defects for U.S. owners ........................ 542 Seat belt instructions for Canadian owners (in French) ............................... 543 SRS airbag instructions for Canadian owners (in French) ................
542 R e por ting saf ety defects f or U .S. owners If you believe that your vehicl e has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway T r affic Safety Administration (NHTSA) in addition to notifying T oyota Motor Sales, U.
543 10 For owners Sea t belt instr uctions f or Canadian o wner s (in F r enc h) ● T irez sur la ceinture ép aulière jusqu’à ce qu’elle recouvre entièrement l’épaule; elle ne doit cependant pas toucher le cou ni glisser de l’épaule. ● Placez la sangle abdominale de la ceinture de sécurité le plus bas possible sur les hanches.
544 A TTENTION ■ Dommages et usure de la ceinture de sécurité Inspectez les ceintures de sécurité périodiquement. Contrôlez qu’elles ne sont pas ent aillées, ef filochées, et que leurs ancrages ne sont p as desser- rés. Ne pas utiliser une ceinture de sécurité défectueuse avant qu’elle ne soit remplacée.
545 10 For owners SRS airbag instr uctions f or Canadian o wn- er s (in F rench) The following is a French explan ation of SRS airbag instructions extracted from the SRS airbag section in this manual. See the SRS airbag section for more detailed SRS airbag instruc- tions in English.
546 ◆ Coussin s gonflables SRS frontaux Coussins gonflables SRS conducteur/passager avant Participent à la protection de la tête et du tho rax du conducteur et du passager avant contre les choc s .
547 10 For owners Mod èles à Simple Cabine Mod èles à Double Cabine et CrewMax Composition du système de coussins gonflables SRS I n f o r m a t i o n P r o v i d e d b y :.
548 V otre véhi cule est équipé de COUSSINS GONFLABLES ÉVOLUÉS, dont la conception est basée sur les no rmes de sécurité des véhicu les automobiles américains (FMVSS208). Le boîtier électro nique de coussins gonflabl es (ECU) utilise les inform ations reçues des cap- teurs, etc.
549 10 For owners A TTENTION ■ Précautions avec les coussins gonflables SRS Respectez les précautions suivantes concernant les coussins gonflable s SRS. À défaut, des blessures graves, voire mortelles, pourraient s’ensuivre. ● Le conducteur et tous les passagers à bord du véhicule doivent porter leur ceinture de sécurité correctement.
550 A TTENTION ■ Précautions avec les coussins gonflables SRS ● Le coussin gonflable SRS passager avant se déploie également avec une puissance considérable et peut occasionner des blessures graves, voire mortelles, notamment lorsque le passager avant se trouve très près du coussin gonflable.
551 10 For owners A TTENTION ■ Précautions avec les coussins gonflables SRS ● Ne pas s’asseoir sur le bord du siège et ne pas s’appuyer contre la planche de bord. ● Ne laissez pas un enfant debout face au coussin gonflable SRS passager avant ni assis sur les genoux d’un pas- sager avant.
552 A TTENTION ■ Précautions avec les coussins gonflables SRS ● Ne suspendez aux crochets à vêtements aucun cintre nu ni aucun objet dur . En cas de déploiement des coussins gonflables SRS rideau, tous ces objets pourraient se transformer en projectiles et causer des blessures graves, voire mortelles.
553 10 For owners A TTENTION ■ Précautions avec les coussins gonflables SRS ● Si vous avez des difficultés à respirer après le déploiement des coussins gonflables SRS, ouvrez une porte ou une vitre pour faire entrer de l’air frais, ou bien descendez du véhicule si cela ne présente pas de danger .
554 Camper infor mation C The figures given in the illustration indicate the recommended center of gravity zone. Recommended loca tion for cargo center of g ravity for cargo weight rating Rear end of truck bed This information has been prep ared in accordance with reg ulation issued by the National Highwa y T raffic Safety Administration of t he U.
555 10 For owners When the truck is used to carry a slide-in camper , the total cargo load of the truck consists of the manufacturer ’s camper weight figure, the weight of installed additional camper equipment not included in the manufactu rer ’s camper we ight figur e, the wei ght of campe r cargo, and the weight of passengers in the camper .
556 ■ Cargo weight rating Engine Drive Cab Bed Grade Passenger Cargo Wei gh t Rating lbs kg 3UR-FE 2WD Regular Long SR5 3 1320 599 3UR-FE 3UR-FBE 4WD 3 1260 572 1UR-FE 2WD Double S tandard SR5 6 505.
557 10 For owners Secure loose items to prevent weight shifts that could affect the bal- ance of your vehicle. Whe n the truck camper is loaded, drive to a scale and weigh on the front and on the rear wheels separately to determine axle loads. Individu al axle loads should not excee d either of the Gross Axle Weight Ratings (GA WR).
558 ■ GA WR and GVWR Regular Cab models * : The model code is indicated on the Certification Label. ( P. 5 1 0 ) Model code * Engine Driving system Bed type GA WR GVWR Front Rear USK51L- THTSKA 3UR-FE 2WD Long 3900 lb. (1770 kg) 4150 lb. (1885 kg) 7000 lb.
559 10 For owners Double Cab models * : The model code is indicated on the Certification Label. ( P. 5 1 0 ) Model code * Engine Driving system Bed type GA WR GVWR Front Rear UPK51L- CRTSKA 1UR-FE 2WD S tan- dard 3900 lb. (1770 kg) 4000 lb. (1815 kg) 6700 lb.
560 CrewMax mo dels * : The model code is indicated on the Certification Label. ( P. 5 1 0 ) Model code * Engine Driving system Bed type GA WR GVWR Front Rear UPK51L- PSTSKA 1UR-FE 2WD Short 3900 lb. (1770 kg) 4050 lb. (1840 kg) 6800 lb. (3085 kg) UPK56L- PSTSKA 4WD 4000 lb.
561 Index What to do if... (Troubleshooting) .................... 562 Alphabetical index ..................... 565 For vehicles with Entune Audio Plus or Entune Premium Audio, refer to the “NA VIGA TION SYSTEM OWNER’S MANUAL” for information regarding the multimedia system.
562 What to do if... (Troubleshooting) W hat to do if ... (T roubleshooting) ● If you lose your keys, new genuine keys can be made by your T oyota dealer . ( P . 98) ● Is the wireless key battery weak or depleted? ( P . 433) ● The function may not operate properly due to the condition of the radio wave.
563 What to do if... (Troubleshooting) ● It is locked to prevent theft of the vehicle if the key is removed from the engine switch. ( P . 180) ● Is the window lock switch pressed? The power window except for the one at the driver’s seat cannot be oper- ated if the window lock switch is pressed.
564 What to do if... (Troubleshooting) ● S top the vehicle in a safe place and replace the flat tire with the spare tire. ( P . 476) ● T ry the procedure for when the vehicle becomes stuck in mud, dirt, or snow .
565 Alphabetical index Alphabetical index A/C ..................... ............. .. 336, 3 43 Air condition ing filter ............. 43 0 Automatic air condi tioning system ......... ............. .......... 343 Manual air cond itioning system ......
566 Alphabetical index Automatic transmission Automatic tra nsmission.. ....... 18 1 If the shift lever canno t be shifted from P .............. ....... 4 92 TOW/HAUL switch ...... .......... 184 AUX port .... .............. ......... 2 55, 282 Auxiliary bo xes .
567 Alphabetical index Power window precautions ... 136 Rear door child-protector ...... 104 Removed wireless remote control ba ttery precaut ions .. ............. .......... 434 Seat belt extender precaut ions .. ............. ............ 37 Seat belt p recaution s .
568 Alphabetical index If you think something is wrong ..... ............... .......... 463 If your vehic le becomes stuck ....... ............. ............... 499 If your vehic le has to be stopped in an emergency ... 457 If your vehic le needs to be towed .
569 Alphabetical index Information ........... ............. .... 520 Refueling .............. ............... .. 195 Type .. ............. ............. .. 195, 51 1 Warning ligh t .. ................ ....... 4 66 Warning messa ge .. ............... 474 Fuel consumption Average fuel consumption .
570 Alphabetical index If you lose your keys ... ............ 98 Ignition switch ................ ....... 1 79 Key number plate... ................ . 98 Keyless entry ................. ....... 10 1 Replacing th e battery ............ 433 Wireless remote control .
571 Alphabetical index Noise from und er vehicle.... ........ 8 Odometer. ............. ................ ...... 9 0 Off-road precaution s ........ ....... 244 Oil Engine oil .. ............. ............. .. 512 Differentia l oil ......... ...........
572 Alphabetical index Replacing Fuses ........ ............. ............... 435 Light bulb s ... ............... .......... 438 Tires .................. ............. ....... 4 76 Wireless remote control battery ............... ............... .. 433 Reporting safety defects for U.
573 Alphabetical index Spark plug . .............. ............. .... 514 Specifica tions ................... ....... 50 2 Speedome ter ... ............. ............. . 88 Steering Column lock rel ease . ............ 180 Steering wheel Adjustment ...
574 Alphabetical index Tire inflation pressure ............. 424 Maintenanc e data ................. 517 Warning ligh t .. ................ ....... 4 67 Tire informati on ..................... .. 524 Glossary.... ................ ............ 529 Size .
575 Alphabetical index Warning buzzers Brake system ....... ......... 465, 473 Downshifting ............. ............ 185 Intuitive pa rking assist .......... 203 Key reminder ..................... ... 180 Light remi nder ................ ....... 19 0 Open door .
576 GAS ST A TION INFORMA TION Auxiliary catch lever Fuel filler door P . 405 P . 197 Hood lock release lever T i re inflation pressure P . 405 P . 517 Fuel tank cap acity (Reference) S tandard fuel tank: 26.4 gal. (100.0 L, 22.0 Imp.gal.) Large fuel tank: 38.
デバイスToyota Tundra (2015)の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Toyota Tundra (2015)をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはToyota Tundra (2015)の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Toyota Tundra (2015)の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Toyota Tundra (2015)で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Toyota Tundra (2015)を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はToyota Tundra (2015)の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Toyota Tundra (2015)に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちToyota Tundra (2015)デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
