TP-LinkメーカーTL-SG1008Pの使用説明書/サービス説明書
ページ先へ移動 of 16
User Guide TL-SG1008P 8-Port Gigabit Desktop Switch with 4-Port PoE Rev ˖ 1.0.0 7106504137.
.
COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and p roduct names are trademarks or registered trademarks of their respective holders.
FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when th e equipment is operated in a commercial environment.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authorit y to operate the equipment. CE Mark Warning This is a class A product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures.
CONTENT Package Contents ...................................................... 1 Chapter 1. Introductio n of the Product .......................... 2 1.1 Overview of the Produc t ...................................... 2 1.2 Convention ...............
1 Package Contents The following items should be found in your box: ¾ One TL-SG1008P 8-Port Gigabit Desktop Switch with 4-Port PoE ¾ One DC Power Adapter ¾ Four rubber cushions to be used under the Switch ¾ This User Guide Note Make sure that the box contains the above items.
2 Chapter 1. Introduction of the Product Thank you for choosing the TL-S G1008P 8-Port Gigabit Desktop Switch with 4-Port PoE. 1.1 Overview of the Product The TL-SG1008 P 8-Port Gigabit Desktop Switch.
3 1.2 Convention The Switch or TL-SG1008P mentioned in this User Guide stands for TL-SG1008P 8-Po rt Gigabit Desktop Switch with 4-Port PoE without any explanation. 1.3 Features ¾ Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab, IEEE802.3x, IEEE802.
4 Chapter 2. Installation During the installation procedure, please only use the accessories equipped with the Switch. 2.1 Mounting the Switch on a Desk To install the Switch, please follow the steps: 1) Place the Switch on a flat desk. 2) Remove the adhesive backing papers from the rubber cushions.
5 2) Then, the 1000Mbps and Link/Act LED indicators will flash momentarily for one second, which represents a resetting of the system. Note If the LED indicators don’t respond as described above, please check the power supply and its connection. Chapter 3.
6 Name Status Indication On (green) There is a PoE PD connected to the p ort, which supply power su ccessfully. Flashing (green) The PoE power circui t may be in sh ort or the power current may be overloaded. PoE ports (ports1~4) Off No PD is connected to the corresponding port, or no power is supplied a ccording to the pow er limits of the port.
7 Note If all PoE PDs power consumption is >= 53W, a priority * will be arranged among the PoE ports like port-1 = port-2 = port-3 > port-4, then the system will cut off the power of the lowest-priority port. *Priority: This function will help protect the system when the system power is overloaded.
8 ¾ PoE Ports (1-4): These ports support PoE function which integrates power and data onto one Ethernet cable. Once the device you connect to the Switch is identified, the Switch will supply power through the PoE port, and then you can use it as a 10/100/1000Mbps Auto-Negotiation RJ45 Ethernet port.
9 Appendix A: Specifications General Standard IEEE802.3, IEEE80 2.3u, IEEE802.3a b IEEE802.3x, IEEE802.3a f Protocol CSMA/CD Ethernet: 10Mbps (Half Duplex ) 20Mbps (Full Duplex) Fast Ethernet: 100Mbps.
10 MAC Address Learning Automatically learning, automatically aging 10Base-T: 14880pps/Port 100Base-Tx: 148800pps/Por t Frame Filter Rate 1000Base-T: 1488000pps/Port 10Base-T: 14880pps/Port 100Base-Tx: 148800pps/Por t Frame Forward Rate 1000Base-T: 1488000pps/Port Environmental and Physical Power Consumption 5.
デバイスTP-Link TL-SG1008Pの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
TP-Link TL-SG1008Pをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTP-Link TL-SG1008Pの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。TP-Link TL-SG1008Pの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。TP-Link TL-SG1008Pで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
TP-Link TL-SG1008Pを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTP-Link TL-SG1008Pの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、TP-Link TL-SG1008Pに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTP-Link TL-SG1008Pデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
