TRENDnetメーカーTE100-MP1Uの使用説明書/サービス説明書
ページ先へ移動 of 19
TE100-MP1U TE100-MP2U TEW-MP2U Quick Inst allation Guide.
T able of Contents T able of Contents V ersion 04.06.07 English ......................................... ..................................................... ......................................................... Troubleshooting .................
1. Before Y ou Start English 1 Package Contents System Requirements Note: 1. Do not install MFP Server Control Center , connect printer to print server and connect the computer to the print server until instructed to do so. 2. The MFP Server Control Center must be installed on each computer in order to use your multi-function printer .
Application 54Mbps 802.1 1g Wireless 2-Port Multi-Function USB 2.0 Print Server (TEW-MP2U) Notebook with Wireless PC Card (TEW-421PC) Workstation with Wireless PCI Adapter (TEW-423PI) Cable/DSL Modem Internet Multi-Functional USB 2.0 Printer External USB 2.
2. How to Connect Note: Please refer to your printer's manual for printer installation instructions. 3. Connect a RJ-45 network cable from a Switch/Router to the LAN port of the Print Server . 5. Power ON printer . 1. Install the printer drivers to your computer .
1. Insert the Utility CD-ROM into your computer's CD-ROM Drive and then click Install Utility . 3. Configure the Print Server 2. Follow the InstallShield Wizard instructions. Then click Finish . 3. Click the Print Server and click Configure Server .
Print Server configuration is now complete. For detailed information regarding the TE100-MP1U/TE100-MP2U configuration and advanced settings, please refer to the User's Guide on the Utility CD-ROM or TRENDnet's website at www .trendnet.com 5.
English 6 4. Configure Wireless Settings (TEW -MP2U only) 1. Click the Print Server and click Configure Server . 2. Enter the User name and Password, and then click Login . User Name: admin Password: admin 3. Click Wireless . Select your Region or Domain to meet your country's regulations.
English 7 5. Cllick Close . 7. V erify the WLAN LED is lit on the Print Server . 6. Unplug the power to the Print Server , disconnect the Ethernet cable to the Print Server , wait 15 seconds, then plug power to the Print Server back in. Print Server wireless configuration is now complete.
English 8 5. Printing Note: 1. For LPR, IPP and Manual connect printing instructions, please refer to the User Guide. The User Guide is included on the Utility CD-ROM. 2. A computer using LPR or IPP printing and a computer using NetUSB printing can not print documents to the same printer simultaneously .
English 9 5. Select the printer . Then click Disconnect . (optional) Note: For Auto Connect Printing, a user does not have to wait for the current owner to click disconnect. Follow step 1 to grab ownership of the Print Server . 4. User can now start printing.
English 10 6. Faxing 3. Select your fax as the printer . 1. Select the printer . Then click Connect . 2. Open the document that you wish to fax and click Print . 4. Y our Multi-Function Printer's fax software will appear . Follow the fax software instructions for sending a fax.
English 1 1 7. Scanning 1. Select the printer . Click Network Scanner . 2. Select TW AIN or WIA format and click OK . 3. Place the document on the Multi- Function Printer's Scanner bed. 6. Repeat steps 3, 4 and 5 to scan additional documents. Otherwise, click Close .
English 12 8. Storage Selecting Mode 2. Click Supported Protocols , select Server Mode or NetUSB Mode and then click apply . 1. Select the Print Server and click Configure Server . Server Mode 3. Click Y es to restart the Print Server . 1. Click Network Storage .
English 13 3. Select the desired drive letter and then click Finish . NetUSB Mode Note: Only one user can connect to the storage device at a time in NetUSB mode. 1. Click Connect. 2. Select Open folder to view files using Windows Explorer and then click OK .
Q1. A1. Q2. A2. Q3. A3. Q4. A4. Q5. A5. The Multi-Function Print (MFP) Server Control Center does not detect the Print Server and/or printer/storage device. What should I do? First, double check your hardware connections; make sure that the Print Server and printer are powered ON and are properly connected.
Q6. A6. Q7. A7. Q8. A8. Q9. A9. Q10. A10. I configured my print server to automatically receive an IP Address from a DHCP server , and now I cannot go into the print server’s web utility . Open the USB MFP Server Control Center (See 3. Configure the Print Server) to locate your print server’s IP Address.
Certifications This equipment has been tested and found to comply with FCC and CE Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received. Including interference that may cause undesired operation.
T RE N D n e t T e ch n i ca l S u pp o r t P r o d uc t War r a n t y Re gi s t r a ti o n Please take a moment t o regist er your product online. Go to TRENDne t’s website at http://www .
デバイスTRENDnet TE100-MP1Uの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
TRENDnet TE100-MP1Uをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTRENDnet TE100-MP1Uの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。TRENDnet TE100-MP1Uの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。TRENDnet TE100-MP1Uで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
TRENDnet TE100-MP1Uを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTRENDnet TE100-MP1Uの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、TRENDnet TE100-MP1Uに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTRENDnet TE100-MP1Uデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。