TriaxメーカーSR-26の使用説明書/サービス説明書
ページ先へ移動 of 22
SR-26 User Guide SR-26 ANALOG SATELLIT RECEIVER • 450 Pre-prog rammed channels (ASTRA, EU TELSAT/HOT BIRD, and other) • 2 SCART connectors (TV and VCR /DECODER) • OSD On-Screen- Display (Engl ish and German) • Parental lock and favour ites list • Frequency range 920 – 2150 M Hz • LNB control v ia 14/18 vol t, 22 kHz and Di SEqC 1.
- 1 - CONTENTS GENERAL PROPERTIES ........................................................................................... 2 SAFETY PRECAUTIONS ............................................................................................ 3 Power Source: .
- 2 - GENERAL PROPERTIES 1) User-friendly OSD menu control (2 languages) 2) DiSEqC 1.0 1 3) 2 Scart s (TV , VCR/Decoder) 4) Keypad control 5) Multi-functional remote control 6) Horizontal/vertical pol.
- 3 - SAFETY PRECAUTIONS Power Source: The receiver should be operated only from an 85-265 V AC, 50 Hz outlet. Please do not open the cover by yourself. There is high voltage in the set, which will danger your life. Please ask closest service for help.
- 4 - S A TELLITE ANTENNA T o have an excellent function of the sat-receiver , it is necessary to install the antenna correctly . Please avoid under all conditions to have a short circuit at the antenna cable conductor (LNB receiver). The sat-receiver is equipped with a LNB short-circuit pro- tection.
- 5 - Tuning your TV to the Sat-receiver: Put the switch T est/TV on the backside of the set to position TEST . The signal of the sat-receiver is tuned for channel 38(UHF) ex factory . Turn on your TV and tune it with the channel search (UHF area) to the test signal.
- 6 - FUNCTIONS ON THE FRONT P ANEL OF THE RECEIVER 1. STANDBY : If the receiver is in the standby position, you can turn on or off with this button. (last tuned program will be shown). 2. BUTTONS : Modification on selected pages aremade by these buttons.
- 7 - CONNECTIONS AND SER VICE ELEMENTS A T THE BACK SIDE OF THE SET 4. LNB Input Connection to outside unit (LNB). Use F connector . 5. T est signal switch The test signal can be switched with 6. Tuning of RF output channel between Ch 30-Ch 39 7 . ANT IN Input for terrestrial TV antenna 8.
- 8 - REMOTE CONTROL FUNCTIONS 13. ST ANDBY : The receiver can be turned on or off with this button. 14. (MUTE) : For the interruption of the sat-receiver sound (Mute). 15. 0-9 BUTTONS : For the direct se- lection of the program number , video and audio frequency .
- 9 - MENU INTERF AC E Menu System: When the MENU key is pressed on R/C, the main menu is entered. This menu page consists of four sub-menus. These are as following; P+ , P- are used to move up & down in the main menu as the other pages.
- 10 - In LNB NO line, 8 or 16 different LNB configurations (corresponding to the LNB NO line in the inst allation page) can be chosen by using + , - (8 for DiSEqC OFF , 16 for DiSEqC ON mode). At every LNB NO changing, the video frequency is driven accord- ing to selected LNB frequency .
- 11 - T o skip a program, PR. SKIP line is used. If it is enabled, the user can not reach this program with P+ , P- buttons. Only direct accessing is enabled to watch the skipped program. TV is used to return without saving, Store button to return to the program mode with saving for selected channel number .
- 12 - Language: On screen menus are in 2 languages. Language is selected with + or - and stored with Store button. Setup Menu: This menu can only be entered by pressing the P+ & P- buttons in front panel of the receiver together in the standby mode.
- 13 - In the DiSEqC line, DiSEqC mode can be changed to OFF/ON. While DiSEqC is switched to OFF , REPEA T automatically changes to 0, no DiSEqC signals are gen- erated and the installation menu is as in installation page description. The user can not reach REPEA T line in this mode.
- 14 - In LNB POWER line, LNB power can be switched to OFF in SMA TV applications that your receiver does not need to send any signals (e.g. 22kHz, T oneburst, DiSEqC) to receive the satellite broadcasting.
- 15 - CONNECTION OF THE SA T -RECEIVER WITH A SCART CABLE.
- 16 - CONNECTION OF THE SA T -RECEIVER WITH RF ANTENNA CABLE.
- 17 - TROUBLE SHOOTING.
- 18 - TECHNICAL SPECIFICA TIONS GENERAL LNB input .................................................. : 1 Supply V oltage .......................................... : 85-265 V AC, 50Hz Program Place ......................................... : 450 channels Input Frequency .
- 19 - RF MODULATOR UHF output conn. ...................................... : IEC male ANT input conn. ........................................ : IEC female S tandard ................................................... : P AL G Output channel ........
- 20 - SR-26 User Guide.
- 21 - SR-26 User Guide Triax A/S Bjørnkærv ej 3 DK-8783 Hornsy ld www.t ria x.c om.
デバイスTriax SR-26の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Triax SR-26をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTriax SR-26の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Triax SR-26の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Triax SR-26で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Triax SR-26を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTriax SR-26の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Triax SR-26に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTriax SR-26デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
