Tru-TestメーカーElectric Fence Security Systemの使用説明書/サービス説明書
ページ先へ移動 of 17
ENGLISH ..................................................................................................................................... 2 The Energizer Monitor Unit ................................................................................
2 ENGLISH The Energizer Monitor Unit Congratulations on your recent purchase of an Energizer Monitor Unit electric fence security system. The unit is a combined electric fence energizer and alarm system designed primarily for security fencing applications.
3 Which Energizer Monitor Unit do you have? The electric fence security system is based on one of two units, a Premium or a Compact: Premium A Premium unit has just a single ‘power’ indicator lamp on the case front. This unit is typically installed together with a Keypad and/or Keyswitch.
4 Arming and Disarming the Electric Fence Security System Arming the electric fence security system Arm the system when you wish to fully secure the property.
5 Disarming the electric fence security system Disarming using the Keyswitch Disarm the system in the same way as you arm it. 1 Insert the key into the Keyswitch. 2 Rotate ¼ turn to the right until a fast beeping is heard. 3 Return the key back to the upright position and remove.
6 Daytime Fence Monitoring Twenty-four hour fence monitoring can be provided by the unit, even without fully energizing the fence. During the daytime, when people and ch ildren are expected to be around the fenced area, fence monitoring can be provided at a reduced vo ltage, by selecting “Monitor mode”.
7 Exiting Monitor mode using the Keypad To exit Monitor mode and return to Standby, enter the UPIN or OPIN, then press : COMMAND KEY 1 KEY 2 KEY 3 KEY 4 KEY 5 Return to Standby using: User PIN UP I N or Owner PIN OP I N The system will disarm, the Armed lamp will turn off and the Pulse lamp will stop flashing.
8 Alarm Response If the electric fence security system is breached, it triggers an alarm — the security siren and any auxiliary equipment, such as a master alarm system/tele-dialler, are activated. After activation, the cause of the alarm is indicated by the Fence and Gate lamps (on the case front of the Compact, the Keypad, and Keyswitch).
9 Panic Alarm In an emergency, a panic alarm can be raised manually by entering Panic mode. Entering Panic mode Entering Panic mode using the Keypad Enter the key sequence: COMMAND KEY 1 COMMENT Enter.
10 System Operation Indicator lamps You can quickly check the operating status of the electric fence security system by viewing t he LED indicator lamps, fitted to Keyswitch, Keypad and the case front of the Compact unit.
11 Gate Alarm The unit can monitor the gate used to access the area secured by the elect ric fence. If the gate is opened while the system is armed, an alarm will be triggered (subject to the optional exit/entry delays described below). Exit/entry delays The unit can be set with a range of exit/entry dela y times.
12 Setting the User and Owner PIN numbers On Keypad equipped systems, the User PIN (UPIN) or Owner PIN (OPIN) number must be entered before the unit will obey any commands, except when raising a panic alarm. These numbers should be kept secret to prevent unaut horised operation of the unit.
13 Troubleshooting General system faults If you encounter a problem with your electric fenc e security system, first ask your service agent for advice. If the unit detects a fault in the system, it w ill log a fault code, and the Power lamp will start flashing fast.
14 Care and Maintenance While the electric fence security system has been designed to be as maintenance-free as possible, observing the recommendations below will help to ensure a long and trouble-fre.
15 Electric Fence Safety Considerations If you are unsure of the meaning of the safety points detailed below, please seek clarification from your installer before using the system. The following section has been prepared from information appearing in international safety standard IEC 60335-2-76.
16 • Connecting lead s that are run in side buildings shall be effectively in sulated from the earthed stru ctural parts of the building. This ma y be achieved by using insu lated high voltage ca ble.
17 • Ensure that all mains operated, a ncillary equipment con nected to the electric secu rity fence circuit provides a degree of isolation be tween the fence circuit and the s uppl y m ains equivalent to that provided by the energizer.
デバイスTru-Test Electric Fence Security Systemの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Tru-Test Electric Fence Security Systemをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTru-Test Electric Fence Security Systemの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Tru-Test Electric Fence Security Systemの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Tru-Test Electric Fence Security Systemで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Tru-Test Electric Fence Security Systemを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTru-Test Electric Fence Security Systemの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Tru-Test Electric Fence Security Systemに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTru-Test Electric Fence Security Systemデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
