BekoメーカーC7の使用説明書/サービス説明書
ページ先へ移動 of 30
Operating Instructions COLOUR TELEVISIONS NICAM STEREO 24”, 25”, 26”, 28”, 29”, 32” C7 SERIES.
List of contents Special features Safety instructions Electrical connections Getting started Aerial connection Switching on Battery fitting Control unit Front and rear panel External connections table.
T elevision Thank you for buying this television which is designed to give you many years of satisfactory service. Y ou may already be familiar with using a television but do please take time to read these instructions.
3 Safety is Important Y our safety and the safety of others is important. Please, therefore, ensure you r ead the Safety instructions before you operate this television. Safety instructions Read all the safety instructions before first use of your TV.
4 Caution: - Under no circumstances should the discarded plug be inserted into a mains socket. T o prevent shock hazard carefully dispose of the discarded plug into your dustbin, do not leave the plug lying around where children might see it.
5 Getting started Remove your T elevision carefully from the bo x. Y ou may wish to Y ou can use an outdoor or indoor aerial. Ho wever , if you use an indoor aerial the quality of the reception may be reduced and adjustment of the aerial may be required when changing programs.
6 Control Unit Front Panel Program Down/Up button V olume Down/Up button. General ON/OFF switch Stand by (Dependant on model) Stand by indicator External Connections: (Front or side) Right audio PHONO.
External connections table STD X : ST ANDARD : DEPENDANT ON MODEL Remote control 7 Standby Numeric AV Swap V olume up Program down Picture format Menu/Fast text Double height text Update Sound smart c.
8 T uning the television There are two ways of tuning your television: Manual, where you control the tuning process or Autoprogram where the television does it all automatically . Please Note If the TV is set to a channel with no signal the TV will return to standby after 5 minutes.
9 Tuning with channel numbers Enter the SETUP menu by pressing the blue button. Press the OK button to enter the CHANNEL row . Use the OK button to select “S” for cable channels and “C” for terrestrial broadcast. Use Volume up button to select the channel number buttons.
10 Program Table Once you have tuned in all the channels you want, you can change their programme number , if required, and name them. select PROGRAM T ABLE and press the OK button or press directly the Y ellow button. PROGRAM 01 will be selected and the channel stored under PROGRAM 01 will be showing on the screen.
11 TV controls Programme selection Press the Program up or Program down button on the TV or remote control or press a Numeric button to select a programme. T o select a programme whose number is greater than 9 using the numeric buttons, press the -/-- button first and then press the two Numeric buttons.
12 V olume Sets default volume using the Volume up and down buttons. T o save your settings, select ST ORE and press the OK button. will be displayed. Press the Menu button to go back to the previous menu. Balance Sets the sound balance when the TV is in stereo mode using the T o save your settings, select ST ORE and press the OK button.
13 Sound mode Y ou can select NORMAL, SP A TIAL or DOLBY VIR TUAL (*) using the Volume up/down buttons or mix button. SP A TIAL sound is an ‘ expanded stereo ’. I t gives the impression that the two speakers in the TV are further apart than they really are .
14 In this menu are a series of preset equalizer settings for different types of sound output. There are five music settings - MUSIC, SPOR TS, CINEMA, SPEECH and USER mode. USER allows you to set your own sound output in the sound Menu: Use the Program down button to select USER.
15 Language There are many languages available for the On Screen Displays (OSD). Press the OK button to select the language list. Press the Program down button to page through all the languages and OK to select. Note: Only the O.S.D. language will change.
16 Picture format This allows you to select the picture size corresponding to the screen type of your TV : Auto The formats of the broadcasts (4:3 or 16:9) are chosen automatically . (4:3, 16:9 and Letterbox for 16:9 TV) This feature is active if the channel you are watching sends WSS (W ide Screen Signalling) information.
17 T eletext is an information system that displays text on your TV screen. U sing the teletext control buttons you can view pages of information that are listed in the teletext index. No on screen display is available in text mode. The contrast, brightness and colour cannot be changed but the volume control is still available.
18 Page hold If the page of text you have selected contains sub pages, these sub pages will automatically be displayed in order with a delay to allow you to read the page. T o stop the move to the next sub page press the Hold button. ST OP will appear in the top left hand corner .
19 Press the AV button repetitively and select the A V3 mode by two scart models or select A V2 mode by one scart models. Connecting e xternal equipment Headphones (optional) The headphones must have an impedance of between 8 and 32 ohms and have a 3.
20 If you have an S-V ideo player you can connect it to SCAR T socket 2 via an adaptor from scart to S-V ideo/PHONO audio (not supplied). S-Video Player Plug a coaxial plug into the RF out socket on the rear of the video recorder and plug the other end into the aerial socket of the TV .
21 Connecting a DVD player Via SCART Make sure the TV and DVD player ar e both switched off. Plug one end of the SCAR T lead (not supplied) into the back of the DVD player and the other end into one of the SCAR T sockets on the back of the TV . S witch on the DVD and the TV .
22 Press the AV button repetitively and select the A V3 mode by two scart models or select A V2 mode by one scart models. Connecting a decoder Via SCART Make sur e the TV and decoder are both switched off. Plug one end of the SCAR T lead (not supplied) into the back of the decoder and the other end into the SCAR T1 on the back of the TV .
23 Connecting TV with video and satellite/digital receiver Connecting TV with camcorder Aerial in Aerial out TV Scart socket V ideo Scart socket Aerial in Aerial out Scart socket Aerial socket Scart 1.
24 Help and service tips The TV does not work Make sure it is plugged into the mains supply and switched on. No sound • Is the sound muted? Press the Mute button.
25 SF PF 16:9 4:3 : Superflat picture tube : Pureflat picture tube : W idescreen TV : Conventional TV General technical specifications Power Supply A C: ................................................... 230-240V 50Hz Number of preset programmes ....
MAIN UK TRANSMITTER STATIONS 26.
Guarantee - Television Your new television is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. (* see note below for small screen sets) What is covered? • All repairs necessary as a result of faulty materials, defective components or manufacturing defect.
HOW TO OBTAIN SERVICE Congratulations on your choice of a Beko colour television. Your new television has been designed and manufactured to the highest quality standards to give you many years of use. To get the best out of it, please take a few moments to read the instruction book.
G1B.801.
デバイスBeko C7の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Beko C7をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBeko C7の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Beko C7の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Beko C7で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Beko C7を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBeko C7の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Beko C7に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBeko C7デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。