Tycoメーカー1939Lの使用説明書/サービス説明書
ページ先へ移動 of 44
T ouchmonitor User Guide 1939L 19” LCD Rear-mount Touchmonitor 3000 Series Revision C.
User Guide 19 " LCD REAR-MOUNT TOUCHMONITOR 1939L Fa mily 3000 Serie s Revision C P/N E851250.
Copyright © 2007 T yco Electronics Corporation. All Rights Reserved. No part of this publication may be reproduced, tra nsmitted, tra nscribed, stored in a retrieval system, or tra nslated into a ny .
T able of Contents Chapter 1 Introduction 7 Product Description 7 Precautions ................................................................ 7 About the Product ...................................................... 8 Chapter 2 Installation and Setup 9 Unpacking Your Touchmonitor .
C H A P T E R 1 I NTRODUCTION Product De scription Y our new touchmonitor combines the reli a ble performa nce of touch technology with the latest a dva nces in (LCD) display de sign. This combination of f eatures create s a natural flow of informa- tion between a user a nd your touchmonitor .
About the Product Y our LCD rear -mount touchmonitor is a 19” SXGA TFT color display with the f ollowing f eatures: • The internal microprocessor digitally controls auto-sca nning for horizontal sca n frequencies between 31.5 KHz a nd 80 KHz, a nd vertical sca n frequencies between 56.
C H A P T E R 2 I NST ALLA TION AND S ETUP This cha pter discusses how to install your LCD touchmonitor a nd how to install the driver software. U n pa cking Y our T ouchmonitor Check that the followi.
T ouch Interf a ce Connection Note: Before connecting the cables to your touchmonitor and PC, be sure that the computer and touchmonitor are turned off. 1. Connect one end of the power a da pter to the monitor a nd the other end to the connector of the power cord.
Product Overview Main Unit Re ar View 2-1 1.
In stalling the Driver Software Elo T ouchSystems provide s driver software that allows your touchmonitor to work with your computer . Drivers are located on the enclosed CD-ROM f or the f ollowing operating syste ms: • W indows XP • W indows 2000 • W indows Me • W indows 98 • W indows 95 • W indows NT 4.
In stalling the Serial T ouch Driver In stalling the Serial T ouch Driver f or Windows XP , Windows 2000, Me, 95/98 a nd NT 4.0 NOTE: For Windows 2000 and NT 4.0 you must have administrator access rights to install the driver. 1 Insert the Elo CD-ROM in your computer's CD-ROM drive.
In stalling the Serial T ouch Driver for MS-DOS a nd Windows 3.1 Y ou must have a DOS mouse driver (MOUSE.COM) installed f or your mouse if you wish to continue using your mouse along with your touchmonitor in DOS.
In stalling the USB T ouch Driver Installing the USB Touch Driver for Windows XP, Windows 2000, Me, 95/98 and NT 4.0 1 Insert the Elo CD-ROM in your computer’s CD-ROM drive. If W indows 98, W indows Me or W indows 2000 starts the Add New Hardware W izard.
2-16 User Guide.
C H A P T E R 3 O PERA TION About T ouchmonitor Adjustments Y our touchmonitor will not likely require a djustment. V ari ations in video output a nd a pplication may require a djustments to your touchmonitor to optimize the quality of the display .
Re ar Pa nel Controls Control Function 1 Menu/Exit Display/exits the On Screen Display (OSD) menus. 2 1. Enter contra st of the OSD. 2. Increa se value of the a djustment item. 3. Select item counter-clockwise. 3 1. Enter brightness a djustment. 2. Decrea se value of the a djustment item.
Controls a nd Adjustment On Screen Display (OSD) Menu Function s T o Display a nd Select the OSD Functions: 1 Press the Menu key to a ctivate the OSD menu. 2 Use or to move through the menu. Press the Select key , the parameter will be highlighted when selected.
On Screen Display (OSD) Control Options Control Descri ption Contra st Increases or decrea ses contra st. Brightness Increa ses or decrea se s brightness. V -Position Moves the screen up or down. H-Position Moves the screen left or right. Recall Defaults Returns the monitor to its default settings.
Pre set Modes T o reduce the need for a djustment for dif ferent modes, the monitor ha s default setting modes that are most commonly used a s given in the ta ble below . If a ny of these display modes are detected, the monitor automatically a djusts the picture size a nd centering.
Power M a n agement Syste m The monitor is equi pped with the power ma nagement function which automatically reduces the power consumption when not in use. Power Mode Consumption O n <50W Sleep <4W Off <2W W e recommend switching the monitor off when it is not in use f or a long ti me.
C H A P T E R 4 T ROUBLESHOOTING If you are experiencing trouble with your touchmonitor , refer to the f ollowing ta ble. If the proble m persists, plea se conta ct your local dealer or our service center . Solution s to Common Proble ms Problem Suggestion(s) The monitor does not respond Check that the monitor’s Power Switch is on.
4-24 User Guide.
A P P E N D I X A N A TIVE R ESOLUTION The native resolution of a monitor is the resolution level at which the LCD pa nel is designed to perform best. For the LCD touchmonitor, the native resolution is 1280 x 1024 for the 19 inch size. In almost all ca ses, screen i mages look be st when viewed at the ir native resolution.
As a n exa mple, a SXGA resolution LCD pa nel ha s 1280 pixels horizontally by 1024 pixels vertically . Input video is also represented by the sa me terms.
A P P E N D I X B T OUCHMONITOR S AFETY This ma nual contains information that is i mporta nt for the proper setup a nd maintena nce of your touchmonitor . Bef ore setting up a nd powering on your new touchmonitor , rea d through this ma nual, especi ally Cha pter 2 (Installation), a nd Cha pter 3 (Operation).
Care a nd Ha ndling of Y our T ouchmonitor The f ollowing tips will help kee p your touchmonitor functioning at the opti mal level. • T o avoid risk of electric shock, do not disasse mble the brick supply or display unit ca binet. The unit is not user servicea ble.
A P P E N D I X C T ECHNICAL S PECIFICA TIONS C-29.
T ouchmonitor Specification s Model 1939L LCD Display 19” TFT Active Matrix Pa nel Display Size 376(H) x 301(V) mm Pixel Pitch 0.294(H) x 0.294(V) mm Display Mode CGA 512 x 247 (60Hz) CGA 512 x 256 .
IntelliT ouch T ouchscreen Specif ication s Mecha nical Positional Accura cy Sta ndard deviation of error is le ss tha n 0.080 in. (2.03 mm). Equates to less tha n ±1%. T ouchpoint Density More tha n 100,000 touchpoints/in2 (15,500 touchpoints/cm2). T ouch Activation Force T ypically less tha n 3 ounces (85 grams).
C-32 User Guide CarrollT ouch Infrared T ouchscreen Specif ications MECHANICAL Input Method Finger or gloved ha nd a ctivation ELECTRICAL Positional Accura cy T ypical centroid a ccuracy: 2 mm with 1 .
Surfa ce Ca pa citive T ouchscreen Spe cification s MECHANICAL Input method Finger Gla ss Thickness 0.1 18" / 3.0 mm nominal. (Glass only , not including ta pe, wires a nd/or solder if used) ELECTRICAL Positional Accura cy Reported touch coordinate s are within 1.
SecureT ouch T ouchscreen Specification s MECHANICAL Input Method Finger or gloved ha nd (cloth, leather, or rubber) a ctivation ELECTRICAL Positional Accura cy Sta ndard devi ation of error is le ss tha n 0.
AccuT ouch (re sistive) T ouchscreen Spe cification s Mecha nical Positional Accura cy Sta ndard devi ation of error is less tha n 0.080 in. (2.03 mm).
19” LCD T ouchmonitor (ET1939L-XCW A-X-G) Dimensions C-36 User Guide.
R EGULA TO R Y I NFORMA TION I. Electrical Safety Information: A) Compli a nce is required with respect to the voltage, frequency , a nd current requirements indicated on the ma nufacturer’s la bel.
This Information T echnology Equi pment (ITE) is required to have a CE Mark on the ma nufacturer’s la bel which mea ns that the equi pment ha s been tested to the f ollowing Directives a nd Sta ndar.
39 BAUART GEPRFT TYPE APPROVED TÜV RheinLand Product Safety E141667 MPR II Tested To Comply With FCC Standards FOR HOME OR OFFICE USE N10051 TÜV Rheinland Argentina S.
40 User Guide.
W ARRANTY Except a s otherwise stated herein or in a n order a cknowledgment delivered to Buyer , Seller warra nts to Buyer that the Product shall be free of defects in materi als a nd workma nship. The warra nty f or the touchmonitors a nd components of the product is regional; plea se conta ct your regional of fice.
THESE REMEDIES SHALL BE THE BUYER’S EXCLUSIVE REMEDIES FOR BREACH OF W ARRANTY . EXCEPT FOR THE EXPRESS W ARRANTY SET FOR TH ABOVE, SELLER G RANTS NO OTHER W ARRANTIES, EXPRESS OR IMPLIED BY ST A TU.
Numerics 19" LCD Touchmonitor (ET1939L-XCWA-X-G) Dimensions, 36 A About the Product, 8 About Touchmonitor Adjustments, 17 AccuTouch Touchscreen Specifications, 35 B Brightness, 30 C Care and Hand.
S SecureTouch Touchscreen Specifications, 34 Signal Connector, 30 Solutions to Common Problems, 23 Storage Conditions, 30 Surface Capacitive Touchscrren Specifications, 33 SVGA, 25 SXGA, 25 T Technica.
.
© 2007T yco Electronics Corporation. Printed in USA Check out Elo’s Web site! www.elotouch.com Get the latest... • Product information • Specifications • News on upcoming events • Press releases • Software drivers Getting in T ouch with Elo To find out more about Elo’s extensive range of touch solutions, visit our Web site at www.
デバイスTyco 1939Lの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Tyco 1939Lをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはTyco 1939Lの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Tyco 1939Lの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Tyco 1939Lで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Tyco 1939Lを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はTyco 1939Lの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Tyco 1939Lに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちTyco 1939Lデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。