UnidenメーカーDECT2015+2の使用説明書/サービス説明書
ページ先へ移動 of 60
DECT2015 DECT2015+1 DECT2015+2 DECT 2015+1 OM.indb 1 7/7/08 12:30:16 PM.
2 T able of Contents Welcome ....................................................................... 5 Installing the Phone .................................................... 6 Choosing the Best Location ...................................... 6 Installing the Battery .
3 Customizing Y our Handsets ..................................... 29 Changing the Handset Banner ................................ 29 Selecting a Ring T one ............................................. 29 Activating AutoT alk ........................
4 Power Failures ........................................................ 47 T roubleshooting ........................................................ 48 Common Issues ...................................................... 48 Weak or Hard to Hear Audio .
5 Welcome W elcome Thank you for purchasing a Uniden Multi-Handset phone. Note: Illustrations in this manual are used for explanation purposes. Some illustrations in this manual may differ from the actual unit.
6 Installing the Phone Installing the Phone Choosing the Best Location When choosing a location for your new phone, here are some important guidelines you should consider: Notes: For maximum range: Keep both the base and handset antennas free of obstruction.
7 Installing the Phone Installing the Battery Use only the Uniden BT -904 rechargeable battery pack supplied with your cordless telephone. Push the battery pack connector in firmly. (You should hear it click into place.) Gently tug on the battery wires to make sure the connection is secure.
8 Installing the Phone Connecting the AC adapter T o the base T o avoid risk of re and shock, only use the Uniden PS-S0635YL3 AC adapter with the base. T o the charging cradle (for multi-handset packs only) Use only the Uniden AAD-600S(M) AC adapter with the charging cradle.
9 Installing the Phone Charging the Handset If you have an accessory handset, place it in the charging cradle with the display facing forward. Charge your handset at least 15 to 20 hours before plugging into the phone line. Place the handset in the base cradle with the display facing forward.
10 Installing the Phone Connecting to the Phone Line Make sure that the battery pack is fully charged. What if Check TEL Line appears on the handset display? The telephone cord may not be connected correctly . Check the telephone cord connection. Connect the telephone cord to the TEL LINE jack.
1 1 Installing the Phone Do you have DSL or any high-speed Internet service delivered through your phone line? T ry putting a DSL lter between the base and the wall jack. Without a lter , telephone-line- based Internet services can interfere with standard phones.
12 Installing the Phone Make a quick test call, and then press END to hang up. What if there is a lot of static? Check the sources of interference described in Choosing the Best Location (see page 6): is the base near any of those? Note: Make sure you can get a dial tone on any accessory handsets that were packaged with your phone.
13 Installing the Phone Expanding Y our Phone Adding accessory handsets Y our phone supports a total of six cordless handsets, including any that were supplied with your phone. Y ou can now place a fully-featured cordless handset anywhere AC power is available to connect the charging cradle.
14 Installing the Phone Resetting the Handset on page 51). Or to use multiple bases, see the next section. Using Multiple Bases The handsets supplied with your phone can be registered to a total of four different bases. Compatible bases include the DECT 2015 and DECT 2035 series.
15 Installing the Phone Selecting the base After you register your handset to more than one base, you can set the handset to automatically search for a new base if the base it's currently connected is unavailable or out of range.
16 Getting to Know Y our New Phone Getting to Know Y our New Phone Features 1.8GHz DECT expandable system Expands up to 6 handsets Caller ID/Call W aiting with phonebook match Store 30 Caller ID numbe.
17 Getting to Know Y our New Phone T erminology Used in this Manual Accessory Handsets Additional handsets that can register to the base, allowing you to add handsets without connecting another phone line. This base supports a total of six cordless handsets; see page 13 for compatible handsets.
18 Getting to Know Y our New Phone Parts of the Handset Twelve-key dial pad key (down) key (caller ID/right) MENU/SELECT key /MUTE key (messages/mute) END key # key key (speaker) Microphone Charging c.
19 Getting to Know Y our New Phone Charging contacts charge LED FIND KEY Parts of the Base DECT 2015+1 OM.indb 19 7/7/08 12:30:33 PM.
20 Using the Interface Using the Interface Reading the Display Handset ID and banner Number of new Caller ID calls received Call duration T ime In standby During a call The ringer off icon indicates that the ringer is turned off. The voice mail icon appears when you have messages waiting in your voice mailbox.
21 Using the Interface Using the Four-way Function Key Y our handset has a four-way function key that allows you to move the cursor on the display and access the most commonly used features at the touch of a button. Press the left side of the key to open the phonebook.
22 Using the Interface Entering T ext from Y our Handset Y ou can use the number keypad on your handset to enter text by referring to the letters printed on each number key . When you press the number key in a text entry eld, the phone displays the rst letter printed on the number key .
23 Basic Setup Basic Setup Setting the Time T o change the time shown in the display , follow the steps listed below . Press MENU/SELECT . Move the cursor to Day & T ime and press MENU/SELECT . Use and to select the day of the week, and press MENU/ SELECT .
24 Basic Setup Activating the Key T ouch T one Key T ouch T one is the tone your keypad makes when keys are pressed. Y ou can turn this tone on or off. Press MENU/SELECT . Select the Handset Setup menu, and then the Key T ouch T one submenu. Move the cursor to select On or Off.
25 Setting Up the Phonebook Each handset has its own separate phonebook that holds up to seventy names and numbers. When a handset’s phonebook is full, the handset beeps and shows Memory Full on the display . Y ou cannot add any names and numbers in that handset’s phonebook until you delete some of the existing ones.
26 27 Assign a personal ring tone for this entry (PERSONAL RING). Y ou can attach a special ring tone to each phonebook entry; the phone will use this ring tone when this person calls. Use and to select one of the seven different ring tone options (see Selecting a Ring T one on page 29 for a complete list of ring tones).
26 27 Storing Caller ID or Redial Numbers in the Phonebook Y ou can store Caller ID records or redial numbers in the phonebook so you can use them later . Go to the Caller ID or redial list and select the number you want to store. (If the Caller ID information did not include the number , then you will not be able to store it.
28 Deleting all Phonebook Entries With the phone in standby , press . Press MENU/SELECT , and then select Delete All. Delete All? appears in the display . Move the cursor to select Y es. Press MENU/SELECT . Y ou will hear a conrmation tone, and Deleted! appears in the display .
29 29 Customizing Y our Handsets All of the following options are set separately for each handset, so you can customize a handset for each room in your house. Changing the Handset Banner Each handset will display a banner name once it is registered to the base.
30 30 When you hear the tone you want to use, press MENU/SELECT . Y ou will hear a conrmation tone. Activating AutoT alk AutoT alk allows you to answer the phone simply by picking up the handset from the cradle. Y ou do not have to press a button to answer the call.
31 Using Y our Phone Using Y our Phone From a cordless handset From a handset speakerphone Making a call Pick up the handset from the cradle. Press TALK/FLASH . Listen for the dial tone. Dial the number . OR Pick up the handset from the cradle. Dial the number .
32 Using Y our Phone Making a Call from the Phonebook With the phone in standby , press to open the phonebook. Find the phonebook entry you want to call (see Finding a Phonebook Entry on page 26). Press TALK/FLASH or to dial the number . Note: Y ou can also press T ALK/FLASH or before you open the phonebook.
33 Using Caller ID, Call Waiting, and Redial Lists Using Caller ID, Call W aiting, and Redial Lists If you subscribe to Caller ID service from your phone company , your phone will show you the caller ’s phone number and name (if available) whenever a call comes in.
34 35 Using Caller ID, Call Waiting, and Redial Lists 35 Deleting Caller ID Numbers T o delete only one Caller ID number , press when the phone is in standby , and then nd the number you want to delete. Press MENU/SELECT and select Delete Entry . When the phone asks you to conrm, select Y es .
34 35 35 Using Caller ID, Call Waiting, and Redial Lists Redialing a Number Y ou can quickly redial the last ve numbers dialed on each handset. With the phone in standby , press the REDIAL/PAUSE to open the redial list. Use and or REDIAL/PAUSE to scroll through the redial list.
36 36 Adjusting the Ringer , Earpiece and Speaker V olume 37 37 Adjusting the Ringer , Earpiece and Speaker V olume Adjusting the Ringer V olume Y ou can choose from four ringer volume settings (off, low , medium, and high) separately on each handset.
36 36 37 37 Adjusting the Ringer , Earpiece and Speaker V olume Adjusting the Audio T one If you aren’t satised with the audio quality of your phone, you can adjust the Audio T one of the earpiece while on a call.
38 Finding a Lost Handset Using Hold, Conference and T ransfer 39 Using Hold, Conference and T ransfer Placing a Call on Hold During a call, press CLEAR/INT’COM to place the caller on hold. If you leave a caller on hold for more than ten seconds, the display screen will read, Line On Hold.
38 39 Using Hold, Conference and T ransfer T ransferring a Call Y ou can transfer a call from one handset to another . The handsets must be currently connected to the same base (see page 15). During a call, press CLEAR/INT’COM . Use or to select the handset you want to transfer the call to, and then press MENU/SELECT .
40 Using Special Features 41 Using Special Features Privacy Mode Privacy mode prevents other handsets (that are connected to the same base) from interrupting your call. As long as your handset is in privacy mode, other handsets can’t join your call or make any calls of their own: their displays will show Unavailable .
40 41 Using Special Features Answering an intercom page When the intercom page tone sounds, the display will show the ID of the handset that is paging. Press TALK/FLASH or CLEAR/INT’COM . Note: If AutoT alk is on, the handset will automatically answer the page when you pick up the handset from the cradle.
42 Using Special Features 43 Using a V oice Mail Service If you subscribe to a voice mail service, you can use your phone to access your voice mailbox. When there are messages waiting in your voice mailbox, the new message LED on the handset ashes, and appears in the handset display .
42 43 Using Special Features Resetting the voice message waiting indicator When you receive a new voice mail message, the new message LED on the top of the handset ashes and appears in the handset display .
44 Using Special Features 45 W all Mounting the Base This phone can be mounted on any standard telephone wall plate using an optional wall-mount bracket. Y ou can purchase a wall-mount bracket by visiting www .uniden.com.au for Australian models and www .
44 45 Using Special Features Removing the wall-mount bracket At the bottom of the base, pinch the two "nose" of the wall-mount bracket as shown, and then slide the bracket away from the base. (To AC outlet) Wall plate Place the mounting slots over the pins on the wall plate.
46 47 Maintenance 47 Maintenance Specications Operating temperature 32° F to 122° F (0° C to 50° C) AC adapter Base Charging cradle Part number PS-S0635YL3 AAD-600S(M) Input voltage 240V AC, 50 Hz 240V AC, 50 Hz Output voltage 6V DC @ 350mA 9V DC @ 210mA Battery pack Part number BT -904 Capacity 650mAh, 2.
46 47 47 Maintenance Low battery alert When the battery pack is very low , the phone is programmed to eliminate functions in order to save power . When Low Battery - Charge Handset appears in the handset display and the phone is in standby , none of the keys will operate.
48 T roubleshooting 49 T roubleshooting Common Issues If your phone is not performing to your expectations, please try these simple steps rst. If these steps do not solve your problem, please visit www .uniden.com.au for Australian models and www .
48 49 T roubleshooting When you have this problem... T ry ... A handset says Unavailable. Moving the handset closer to the base. Seeing if another handset has Privacy Mode turned on (see page 40). Making sure the base is plugged in (see page 8). • • • The phone keeps ringing when I answer on an extension.
50 T roubleshooting 51 When you have this problem... T ry ... I can’t get two handsets to talk to an outside caller . Checking to see that there are not two handsets already using the conference feature (see page 38). Making sure another handset is not in Privacy Mode (see page 40).
50 51 T roubleshooting For static on only one handset or in a specic location: For static on more than one handset: Check nearby for one of the common interference sources. T ry moving the handset away from a suspected source, or try moving the suspected source so it’s not between the handset and the base.
52 T roubleshooting 53 Select the base you want to de-register the handset from (see Selecting the base on page 15). Press and hold END and # for more than ve seconds. Select Deregister HS. Select the handset which you are operating, and then press MENU/SELECT .
52 53 T roubleshooting Changing the Line Mode for Multiple Extensions Line mode refers to the method that telephones use to signal each other that an extension is in use. Customer service may recommend changing the line mode if you have any of the following problems: Y our phone keeps ringing after someone answers on an extension phone.
54 T roubleshooting Liquid Damage Moisture and liquid can damage your cordless phone. If the handset or base is exposed to moisture or liquid, but only the exterior plastic housing is affected, wipe of f the liquid, and use as normal. If moisture or liquid has entered the plastic housing (i.
55 Precautions! Precautions! Before you read anything else, please observe the following: W arning! Uniden Australia Pty Ltd and Uniden NZ Ltd DO NOT represent this unit to be waterproof. T o reduce the risk of re, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.
56 Index 57 Index A Accessory handsets .................... 13 Answering calls............................ 31 Any key answer ........................... 30 Audio tone ................................... 37 AutoT alk ...................................
56 57 Index P Personal ring ............................... 24 Phonebook .................................. 25 Copying entries ..................... 28 Creating new entries ............. 25 Deleting entries ............... 27 , 28 Editing entries ....
58 Memo DECT 2015+1 OM.indb 58 7/7/08 12:31:14 PM.
59 One Y ear Limited Warranty One Y ear Limited W arranty UNIDEN DECT2015, DECT2015+1 & DECT2015+2 IMPORT ANT : Evidence of original purchase is required for warranty service. W ARRANTOR : Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited Warranty only available in original country of purchase.
© 2008 Uniden Australia Pty Limited/Uniden New Zealand Limited Printed in China UCZZ01554BZ(0) DECT 2015+1 OM.indb 60 7/7/08 12:31:15 PM.
デバイスUniden DECT2015+2の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Uniden DECT2015+2をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUniden DECT2015+2の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Uniden DECT2015+2の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Uniden DECT2015+2で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Uniden DECT2015+2を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUniden DECT2015+2の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Uniden DECT2015+2に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUniden DECT2015+2デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
