UnidenメーカーEXS 2010の使用説明書/サービス説明書
ページ先へ移動 of 28
Thank you for choosing the Uniden EXS 2010 cordless telephone. This phone is designed for reliability, long life, and outstanding performance utilizing the latest in 900 MHz Digital Spread Spectrum technology. Note: Some illustrations in this manual may differ fr om the actual unit for explanation purposes.
vol DIGITAL SPREAD SPECTRUM batt talk mute redial mem abc def ghi mno pqrs tuv wxyz oper channel pause tone ringer jkl 12 3 45 6 78 9 0# talk flash page/find power status 5 10 12 11 6 7 8 9 13 15 16 17 20 18 19 14 1 2 3 4 27 28 29 25 23 24 26 21 22 1.
Introduction / Features...............inside front cover Controls and Functions ..............inside front cover Getting Started Read this first ..........................................................2 Step 1: Checking the package contents ........
2 This cordless telephone must be set up before use. Follow these steps; Step 1 (page 3) Unpack and check the telephone and accessories. Step 2 (page 4 to 8) Next, choose the best location to set up the base unit.
3 Make sure you have received the following items in the package. If any of these items are missing or damaged, contact the Uniden Parts Department (see below).
4 Do the following steps. • Choose the best location • Connect the base unit • Choose the dialing mode Choose the best location Before choosing a location for your new phone, read the INST ALLA TION CONSIDERA TIONS included in the PRECAUTIONS AND IMPORT ANT SAFETY INSTRUCTIONS brochure.
5 Connect the base unit If you want to install the base unit on the wall, see page 7. Route the cord. T o AC outlet T o telephone outlet T o TEL LINE T o DC IN 9V AC adapter (supplied) T elephone line cord (supplied) 1 2 Place the power cord so it does not create a trip hazard, or where it could become chafed and create a fire or electrical hazard.
6 Use only the supplied AD-310 AC adapter . Do not use any other AC adapter . Connect the AC adapter to a continuous power supply. Place the base unit close to the AC outlet so that you can unplug the AC adapter easily. If your telephone outlet isn't modular , contact your telephone company for assistance.
7 Standard wall plate mounting This phone can be mounted on any standard telephone wall plate. 1 Snap the wall mount adapter into the notches on the base. 2 Plug the telephone line cord to the TEL LINE jack and the AC adapter to the DC IN 9V jack. 3 Plug the telephone line cord into the telephone outlet.
8 Direct wall plate mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • A void electrical cables, pipes, or other items behind the mounting location, that could cause a hazard when inserting screws into the wall.
9 Installing the handset battery pack Charge the battery pack for 15 - 20 hours before you start using your phone. 1 Press the battery cover release. 2 Connect the battery pack connector with the correct polarity (black and red wires), then insert the battery pack into the battery compartment.
10 Battery use time (per charge) From fully charged • Six hours coutinuous use. • T en days when the handset is in the standby mode. When the battery charge becomes low When the voltage of battery pack in the handset is very low and needs to be charged, the phone is programmed to eliminate functions in order to save power .
11 1 Press . Listen for dial tone. 2 Dial the phone number . 3 T o hang up, press or return the handset to the base. Other Operations T o Do this T o adjust the ear speaker volume Press or during the call. T o temporarily switch to tone dial Press . The following (When the base is set to pulse numbers will be sent as tone mode) dialing.
12 Handset on the base 1 Phone rings. The talk/batt LED blinks. 2 Pick up the handset and begin speaking. 3 T o hang up, press or return the handset to the base. Handset of f the base 1 Phone rings. The talk/batt LED blinks. 2 Press or any key (except ) and begin speaking.
13 Ringer tone/volume The phone has four types of ringer tone and volume combinations. In standby mode, press repeatedly on the handset. T o turn the ringer off, set the ringer on/off switch to off . Handset earpiece volume The phone has four earpiece volume levels, Normal, Medium, High, and Loud.
14 The last phone number dialed can be quickly redialed. 1 Press . The talk/batt LED lights. 2 Press . 3 T o hang up, press or place the handset on the base.
15 Y ou can tur n off the handset microphone and temporarily mute the ringer . talk 1 Press during a telephone call. The talk/batt LED flashes. The other party will not be able to hear you although you can hear them. 2 T o cancel mute, press or again.
16 T o locate the handset (while it ’ s off the base), press on the base. The handset beeps for 5 seconds. page/find p a g e / f i n d p o w e r s t a t u s DIGITAL S PR EA D SP E C TR A M 9 0 0 M H z Using page feature If you cancel the page by pressing , press again to return to standby .
17 Y our EXS 2010 stores up to 10 numbers in the handset. 1 Press while in standby mode. The talk/batt LED flashes. 2 Dial the number you wish to store (up to 20 digits). 3 Press again. 4 Press a number key (0 - 9) to select the memory location where you wish to store the number .
18 Memory dialing 1 Press . The talk/batt LED lights. 2 Press . 3 Enter a number (0 - 9) to select the memory location you wish to dial. 4 T o hang up, press or return the handset to the base.
19 1 Press in the standby mode. The talk/batt LED flashes. 2 Press again. 3 Enter the memory location number (0 - 9) you wish to delete. A confirmation beep indicates the number has been erased.
20 T o attach the beltclip Insert the beltclip into the holes on each side of the handset. Press down until it clicks. T o r emove the beltclip Pull both sides of the beltclip to release the tabs from the holes. Y our phone may be used with an optional headset, the Uniden HS910.
21 Battery replacement and handling When the operating time becomes short, even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year . Please contact your place of purchase for a replacement battery.
22 If your phone is not performing to your expectations, please try these simple steps first. Symptom The power LED won't come on. The status LED won't come on when the handset is placed in the base unit. The audio sounds weak and/or scratchy.
23 At Uniden, we ’ ll take care of you! If you need any assistance with this product, please call our Customer Hotline at 1-800-297-1023 PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
24 A, B Battery pack Preparing and charging ............................9 Replacement and handling ..........................21 Beltclip installation ...............20 C Chain dialing.........................18 Connection..............................
EXS 2010 6/28/00 4:12 PM Page 29.
EXS 2010 6/28/00 4:12 PM Page 30.
デバイスUniden EXS 2010の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Uniden EXS 2010をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUniden EXS 2010の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Uniden EXS 2010の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Uniden EXS 2010で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Uniden EXS 2010を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUniden EXS 2010の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Uniden EXS 2010に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUniden EXS 2010デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
