UnidenメーカーEXT 176の使用説明書/サービス説明書
ページ先へ移動 of 52
EXT 176 SERIES EXT176 7/30/2 11:09 AM Page 1.
www .uniden.com EXT176 7/30/2 11:09 AM Page 2.
Contents Welcome/Features 2 Quick Reference Guide 3 Controls and Functions 4 Getting Started Read this First 6 Checking the Package Contents 7 Setting up the Phone 8 Mounting the Base Unit on a Wall 1.
[ 2 ] W elcome Congratulations on your purchase of the Uniden EXT176 series cordless telephone. This phone is designed and engineered to exacting standards for reliability, long life, and outstanding performance. Note: Some illustrations in this manual may differ from the actual unit for explanation purposes.
QUICK REFERENCE GUIDE [ 3 ] Step 1 Charging the Battery TO INSTALL THE HANDSET BATTERY CONNECT TO A PHONE LINE When the handset battery pack is fully charged, after 15-20 hours of charging, plug the telephone cord into the base unit and then into a telephone wall jack.
CONTROLS AND FUNCTIONS [ 4 ] 1 2 3 4 5 6 7 8 9 10 11 12 20 19 18 17 16 15 14 13 1. Handset antenna 2. Beltclip holes 3. Optional headset jack 4. Handset battery compartment 5. Handset earpiece 6. LCD display 7. Cid (Caller ID)/menu key 8. Talk/flash key 9.
21 22 23 24 25 21. Status/Voicemail LED 22. Find handset key 23. Base charging contacts 24. Telephone line jack 25. DC IN 9V jack CONTROLS AND FUNCTIONS [ 5 ] EXT176 7/30/2 11:10 AM Page 5.
GETTING STARTED [ 6 ] Read this First This cordless telephone must be set up before use. Follow these steps: About the digital security code This cordless telephone uses a digital security code to prevent unauthorized access to your base unit. This security code prevents other cordless handset from making calls through your base unit.
GETTING STARTED GETTING STARTED [ 7 ] Checking the Package Contents Uniden Parts Department at (800) 554-3988 Hours: M-F 7:00 a.m. to 5:00 p.m. CST. We can also be reached on the web at www.uniden.com Make sure you have received the following items in the package.
GETTING STARTED [ 8 ] Setting up the Phone Do the following steps: A. Choose the best location C. Connect the base unit B. Install the battery pack A. Choose the best location Before choosing a location for your new phone, read the INSTALLATION CONSIDERATIONS included in the PRECAUTIONS AND IMPORTANT SAFETY INSTRUCTIONS brochure.
GETTING STARTED GETTING STARTED [ 9 ] B. Install the battery pack Charge the battery pack for at least 15-20 hours before plugging the phone line into your phone.
GETTING STARTED [ 10 ] Even when the battery pack is not being used, it will grad- ually discharge over a long period of time. For optimum performance, be sure to return the handset to the base unit after a telephone call.
GETTING STARTED GETTING STARTED [ 1 1 ] • Use only the supplied AD-310 AC adapter. Do not use any other AC adapter. • Connect the AC adapter to a continuous power supply. • Place the base unit close to the AC outlet so that you can unplug the AC adapter easily.
GETTING STARTED [ 12 ] Mounting the Base Unit on a W all Standard wall plate mounting This phone can be mounted on any standard wall plate. 1) Plug the AC adapter into the DC IN 9V jack. 2) Wrap the AC adapter cord inside the molded wiring channel as shown.
GETTING STARTED GETTING STARTED [ 1 3 ] Direct wall mounting If you don't have a standard wall plate, you can mount your phone directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall.
GETTING STARTED [ 14 ] Setting Menu Options There are five setup options available. They are Caller ID options [AutoTalk, CIDCW (Caller ID on Call Waiting), Area Code], Dial Mode and Language. AutoTalk allows you to answer the phone without pressing the talk/flash button.
GETTING STARTED GETTING STARTED [ 1 5 ] 1) When the phone is in the standby mode, press and hold cid/menu . The following screen appears. 2) Press 3 or press twice to select ¨ Area Code ¨. 3) Press select . 4) Use the number keys ( 0 to 9 ), #/ , * /tone/ or delete/ch to enter the 3-digit area code.
GETTING STARTED [ 16 ] 1) When the phone is in the standby mode, press and hold cid/menu . The following screen appears. 2) Press 4 or press three times to select ¨ Dial ¨. 3) Press select to toggle between ¨ Tone ¨ and ¨ Pulse ¨ for each setting.
BASICS BASICS [ 1 7 ] Making and Receiving Calls Pick up the handset (AutoTalk: On) or pick up the handset and press talk/flash (AutoTalk: Off). 1) Pick up the handset. 2) Press talk/flash . 3) Listen for the dial tone. 4) Dial the number. OR 1) Pick up the handset.
BASICS [ 18 ] Adjusting the Handset Ringer and Earpiece V olume Handset ringer tone and volume Press or in standby mode to select one of five ringer tones and volume combinations. Earpiece volume Pressing or during a call will change the earpiece volume of the handset.
BASICS BASICS [ 1 9 ] Redial The redial/p key redials the last number dialed. The redialed number can be up to 32 digits long. T one Dialing Switch-over Some telephone companies use equipment that requires pulse dialing (sometimes referred to as rotary dialing).
BASICS [ 20 ] Flash and Call W aiting If you have "Call Waiting" service and a call waiting tone sounds while you are on a call, press talk/flash to accept the waiting call. There is a short pause, then you will hear the new caller. To return to the original caller, press talk/flash again.
MEMORY DIALING MEMORY DIALING [ 2 1 ] Storing Phone Numbers and Names Memory Dialing allows you to dial a number using just a few key presses. Your EXT176 series stores up to 10 names/numbers in the handset. 1) Press and hold mem until ¨ Memory Store ¨ is displayed.
MEMORY DIALING [ 22 ] The pause feature is useful for long distance calling, credit card dialing, or sequences that require a pause between digits. 5) Press select . ¨ Store Numbe r ¨ is displayed. The cursor flashes indicating that the display is ready for the number to be entered.
MEMORY DIALING MEMORY DIALING [ 2 3 ] Steps for Entering Names and Special Characters Refer to the letters on the number keys to select the desired characters. With each press of a numeric key, the displayed character appears in the following order: Upper case letters first, lower case letters next and finally the number corresponding to the key.
MEMORY DIALING [ 24 ] For example, to enter Uniden ; 1) Pick up the handset and press and hold mem . 2) Enter a number or press , to select a memory location number. 3) Press select . 4) Press 8 twice. 5) Press 6 five times. 6) Press 4 six times. 7) Press 3 four times, then press #/ to move the cursor to the right.
MEMORY DIALING MEMORY DIALING [ 2 5 ] Making Calls with Memory Dialing Memory dialing from Standby Mode 1) Press mem . The handset displays your programmed memory locations. 2) Press or , or enter the number ( 0 - 9 ) to select the memory location you would like to dial.
MEMORY DIALING [ 26 ] Memory dialing from Talk Mode 1) Press talk/flash . ¨ Talk ¨ and the volume setting appears. 2) Press mem . 3) Enter a number ( 0 - 9 ) to select the memory location of the desired phone number. The selected phone number is displayed.
MEMORY DIALING MEMORY DIALING [ 2 7 ] Editing a Stored Name and/or Phone Number 1) Press and hold mem until ¨ Memory Store ¨ is displayed. 2) Press or , or enter a number ( 0 - 9 ) to select the memory location you would like to edit. 3) Press select .
MEMORY DIALING [ 28 ] 7) Use the number key, redial/p or delete/ch to edit the phone number. The phone number cannot exceed 20 digits. (See page 22.) If you don´t want to change the phone number, skip this step. 8) Press select . You hear a confirmation tone, and the following screen appears.
MEMORY DIALING MEMORY DIALING [ 2 9 ] Erasing a Stored Name and Phone Number 1) Press and hold mem until ¨ Memory Store ¨ is displayed. 2) Press or , or enter a number ( 0 - 9 ) to select the memory location you would like to erase. 3) Press select .
VOICE MAIL [ 30 ] Edit Number Delete Number Go Back Store Number Number Stored Using One T ouch V oice Mail Access If you subscribe to voice mail service, you can use your phone to access your voice mailbox. The status/Voicemail indicator on the base of your phone flashes whenever you have messages waiting in your voice mailbox.
VOICE MAIL VOICE MAIL [ 3 1 ] Deleting your Voice Mail Access Number 1) When the phone is standby mode, press and hold Voicemail. Following display appears. 2) Press or to select ¨ Delete Number ¨. 3) Press select . Following display appears. 4) Press to move the pointer to ¨ Yes ¨.
CALLER ID FEATURES [ 32 ] Caller ID You must subscribe to Caller ID service to use this feature. When the telephone rings, the Caller ID feature allows you to view the caller´s name and phone number on the display before you answer the phone. The handset displays the phone number of the incoming call, the name, and time.
CALLER ID FEATURES CALLER ID FEATURES [ 3 3 ] 2) When you pick up the phone, the display changes to ¨ Talk ¨ . (AutoTalk feature is set to on.) V iewing the Caller ID Message List The Caller ID list stores information for up to 30 incoming calls - even unanswered calls.
CALLER ID FEATURES [ 34 ] • While using the ¨ Delete All? ¨ or ¨ Delete Message? ¨ screen if no key is pressed for more than 30 seconds, an error tone sounds and the telephone returns to standby. • If you get an incoming call or page, the deleting operation is canceled and you can answer the call or page.
CALLER ID FEATURES CALLER ID FEATURES [ 3 5 ] 3) Press or to select ¨ Yes ¨ or ¨ No ¨ . 4) Press select or delete/ch . When the pointer is at ¨ Yes ¨ : A tone sounds and all stored Caller ID messages are deleted. When the pointer is at ¨ No ¨ : The display returns to the summary screen.
CALLER ID FEATURES [ 36 ] Using the Caller ID List Calling a party from the Caller ID list You can place a call from the Caller ID list. The EXT176 series stores up to 30 messages. 1) Press cid/menu . Select the phone number that you want to dial by pressing or .
CALLER ID FEATURES CALLER ID FEATURES [ 3 7 ] Storing Caller ID messages in Memory dialing Messages shown in the Caller ID list can be stored in memory dialing. Using the incoming call information (i.e., Caller ID list), the phone number of the party on the Caller ID list can be stored in memory.
ADDITIONAL INFORMATION [ 38 ] Changing the Digital Security Code The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. The first time you charge your handset, the security code is automatically set.
ADDITIONAL INFORMATION ADDITIONAL INFORMATION [ 3 9 ] Note on Power Sources Battery replacement and handling When the operating time becomes short, even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year.
ADDITIONAL INFORMATION [ 40 ] T roubleshooting If your phone is not performing to your expectations, please try these simple steps first. Symptom The status/Voicemail LED won't illuminate when the handset is placed in the base. The audio sounds weak and/or scratchy.
ADDITIONAL INFORMATION ADDITIONAL INFORMATION [ 4 1 ] Symptom The handset doesn't ring or receive a page. Severe noise interference. The Caller ID does not display. If you still have a problem. Suggestion • The battery pack may be weak. Charge the battery for 15-20 hours.
ADDITIONAL INFORMATION [ 42 ] Case If the handset or base is exposed to moisture or liquid, but only affects the exterior plastic housing. If moisture or liquid has entered the plastic-housing (i.e. liquid can be heard in the phone or liquid has entered the battery compartment).
ADDITIONAL INFORMATION ADDITIONAL INFORMATION [ 4 3 ] General Information The phone complies with FCC Parts 15 and 68. Operating temperature: -10 ° to 50 ° C (+14 ° F to +122 ° F) Recharge your phone on a regular basis by returning the handset to the base after each phone call.
[ 44 ] Precautions! Before you read anything else, please observe the following: Warning! Uniden America Corporation DOES NOT represent this unit to be water- proof. To reduce the risk of fire, electrical shock, or damage to the unit, DO NOT expose this unit to rain or moisture.
[ 45 ] we recommend that the base not be plugged into a circuit that also powers a major appliance because of the potential for interference. Be certain that the antenna on the unit is fully extended when needed.
ADDITIONAL INFORMATION [ 46 ] I.C. Notice TERMINAL EQUIPMENT NOTICE: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications.
ADDITIONAL INFORMATION [ 4 7 ] A AC adapter information ...................................... 43 Adjusting ringer and earpiece volume .................... 18 B Battery pack Information .................................................. 43 Install ...
Memo EXT176 7/30/2 11:10 AM Page 48.
At Uniden, w e´ll take car e o f you! If you need any assistance with this product, please call our Customer Hotline at 1-800-297-1023 PLEASE DO NOT RETURN THIS PRODUCT TO THE PLACE OF PURCHASE.
EXT176 7/30/2 11:10 AM Page 50.
デバイスUniden EXT 176の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Uniden EXT 176をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUniden EXT 176の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Uniden EXT 176の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Uniden EXT 176で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Uniden EXT 176を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUniden EXT 176の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Uniden EXT 176に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUniden EXT 176デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
