UnidenメーカーUH-042XRの使用説明書/サービス説明書
ページ先へ移動 of 28
UH-042XR Operating Guide.
➤ Do not operate the transmitter of any radio equipment unless all the Radio Frequency (RF) connectors are secured and any open connectors are properly terminated. ➤ Do not operate the transmitter of any radio equipment near electrical blasting caps or in an explosive atmosphere.
Introduction Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 T echnical Support & Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Included in your UH-042XR Package .
The UH-042XR is a portable two-way UHF-CB radio. It is compact, rugged and fits easily in your hand. This hand held UHF radio will give you consistent, outstanding performance in virtually all conditions and situations.
TECHNICAL SUPPORT AND SERVICE Should you find it desirable or necessary to service your UH-042XR , we suggest you contact the Uniden dealer where you purchased your radio.
INCLUDED IN YOUR UH-042XR P ACKAGE 3 Note: If any of these items are missing from the box, contact your Uniden Dealer . Wrist Strap Belt Clip Operating Guide Product Registration Card and other printe.
BA TTERY INST ALLA TION Y our UH042XR radio uses 3 AA ALKALINE batteries for power . Please refer to page 18 should you wish to use rechargeable batteries. T o install the batteries: 1. Make sure your radio is off. 2. Release the battery cover clip, then remove the battery cover .
LOW BA TTERY ALERT The LCD on your radio shows a battery meter in the lower right corner . icon indicates a fully powered unit. As the batteries lose power , will flash. When the batteries in the unit are low , the unit will go into a Battery Low/Sleep Mode.
➤ When you press any key (except PTT), a short tone sounds. ➤ See the Controls and Indicators page at the back of this operating guide for button and key operations. POWER ON/OFF T o turn the unit ON , rotate the [ON/OFF VOL] clockwise until a “click” is heard.
SELECTING A CHANNEL Press [ ▲ ] or [ ▼ ] to select the desired channel. Note: If you press and hold the [ ▲ ] or [ ▼ ], channel numbers will scroll rapidly .
TO OPERA TE IN DUPLEX MODE Eg. CH01 is being used in your area for repeater purpose. Press [DUP] momentarily . The DUP icon appears. Press [DUP] again to deactivate the duplex operation.
Example: CH40 becomes active If the received signal ceases, the unit will wait for at least 3 seconds for the signal to return, otherwise scanning resumes. T o skip the active channel, press [MEM] momentarily . Scanning resumes. T o deactivate SCAN, press the [SCAN] or [PTT] .
PRIORITY CHANNEL The Priority Channel feature allows user to monitor one of 40 channels in the UH-042XR , monitoring it every 1.5secs during Group Scanning . Choosing a Priority Channel The starting channel, when Group Scanning is initiated, is always the Priority Channel .
CONTINUOUS TONE CODED SQUELCH SYSTEM (CTCSS) CTCSS is a feature that allows a group to talk to each other without hearing other users on the same channel. NOTE : Uniden discourages the use of CTCSS feature until the Australian Communications Authority (ACA) grants the use of CTCSS on CB frequencies.
CTCSS Scan Operation 1. Press [SCAN] to start scanning (GS or OS) mode. 2. During scanning if a signal is sensed on a CTCSS CH, the UH-042XR stops for about 400msecs (decode time) to decode the CTCSS code. If there is no code or the receive code does not match the one programmed on the unit, the unit resumes scanning.
BUIL T -IN VOICE ACTIV A TED CIRCUIT (VOX) VOX feature enables user to transmit automatically by speaking on the microphone of the VOX headset (not supplied) without pressing the PTT switch. NOTE: VOX feature will not work without the Headset Microphone.
T o De-activate VOX 1. T urn OFF UH-042XR . 2. Remove VOX Headset from UH-042XR . 3. Press and hold [VOX] while turning the radio ON. “ VOX ” icon disappears. 4. UH-042XR returns to PTT operation. Note: T urning ON the radio without removing the VOX headset will cause the unit to transmit continuously .
BUSY CHANNEL LOCK-OUT(BCL) This feature prevents accidental transmission on a busy channel. This is recommended on channels where CTCSS is being used. If the channel is “ active ” and the signal is coming from a non or different CTCSS code user the BCL feature will prevent you from transmitting.
BACK LIGHT The Liquid Crystal Display (LCD) is backlit for easy viewing at night or in low light situations. The back lighting automatically switches ON every time a key (except PTT) is pressed. It turns OFF 5secs after the last key is pressed. KEYP AD LOCK T o prevent accidental entries, you can lock the keypad.
BA TTERY LEVEL DISPLA Y The icon in the bottom right hand corner of the screen indicates the UH- 042XR current battery voltage level at all times. The battery level is displayed in 3 levels: LEVEL 3 B.
CHARGING BA TTERIES Warning Notice! Use only the AAD042S optional power adaptor if rechargeable batteries will be used in the UH042XR. • T urn the UH042XR [ ON/OFF VOL] knob off and connect the AC adaptor plug to the mic jack. • Battery charging times vary .
* Emergency calling for both simplex and duplex operation Please do not use this channel in non-emergency cases. # Back-up Emergency Channel Ch. Freq. Usage Ch. Freq. Usage 01 476.425 Simplex/Duplex 21 476.925 Simplex 02 476.450 Simplex/Duplex 22 476.
• Speaker Microphone (SM-050) • AC Adaptor (AAD-042S) • VOX Headset (VM-052) • Standard Headset (HM-050) General Channels T ransmit 40 (with Duplex Channel Support) Receive 40 Oper . T emp. 0 ˚ C - +55 ˚ C Antenna Fixed Microphone Built-in Electret type TECHNICAL SPECIFICA TIONS OPTIONAL ACCESSORIES Code No.
Display Liquid Crystal Display Speaker 36mm Round, 8 Ω Power Source AA Size Battery x 3pcs Size (with antenna) 180(H) x 62(W) x 32(D)mm Weight 150g (with Antenna & without Battery) Operating T ime at 17 hrs (1.2V , 600mAH Ni-Cd Batteries) Duty Cycle 25 hrs (1.
UNIDEN UH-042XR UHF CB RADIO Limited One Y ear Warranty Note: Please keep your sales docket as it provides evidence of warranty . Warrantor: Uniden Australia Pty Limited ACN 001 865 498 Uniden New Zea.
os/gs mem bcl ctcss vox dup scan 5 4 13 14 15 6 7 8 9 3 2 1 10 11 12 CONTROLS & INDICA TORS 23.
1. Speaker Jack 2. Microphone Jack 3. On/Off V olume 4. LCD Display 5. Up Button 6. Down Button 7. Microphone 8. Speaker 9. Scan and VOX Button 10. Open/Group Scan and CTCSS Button 11. Memory/BCL Button 12. Duplex and Key Lock On/Off Button 13. PTT (Push-to-talk) Button 14.
© 2000 Uniden Australia Pty Limited/Uniden New Zealand Limited UTZZ01877ZZ.
デバイスUniden UH-042XRの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Uniden UH-042XRをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはUniden UH-042XRの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Uniden UH-042XRの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Uniden UH-042XRで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Uniden UH-042XRを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はUniden UH-042XRの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Uniden UH-042XRに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちUniden UH-042XRデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
