VarimixerメーカーW20Dの使用説明書/サービス説明書
ページ先へ移動 of 28
SPARE PART AND OPERATION MANUAL FOOD MIXER Model W20D.
Caution -READ BEFORE OPERATING- Caution Varimixer recommends that mixer operators be at least 18 years of age and be thoroughly trained on the use of the mixer. Varimixer recommends that the following precautions be adopted to help make the mixer operation safer and more efficient.
Varimixer warrants its commercial mixers to the original purchaser against defects in material or manufacture for a period of one year from the date of original purchase, subject to the following exclusions and limitations. The warranties provided by Varimixer do not apply in the following instances: 1.
TABLE OF CONTENTS Installation Instructions...................................................................................................2 Cleaning Instructions .....................................................................................
CLEANING The mixer should be cleaned daily or after use.The mixer should be cleaned with a soft cloth and clean water. Sulphonated soaps should be used with caution as they destroy the mixer's lubricants. Never use high pressure cleaning for the mixer.
Power Up and Default: 1. Turn power on Mixer. (Plug in 115AC) - 1:00 Appears on the display. - The slow speed LED lights. (Left LED) 2. Press the bar arrow between the slow and fast LEDs. - 2:00 Appears on the display. - The fast speed LED lights. (Right LED) 3.
Change Time in Fixed mode: 1. Press and hold the bar arrow key for 5 sec. and release. 2. The fixed time for the slow speed will appear in the display. - The LED for slow speed lights. (Left LED) 3. Press the time up keys under the display to enter the desired time for slow speed.
5 Body 2 1 3 5 6 4 7 8 9 10 11 12 13 14 15 16 19 17 21 20 18.
Body 6 Figure Number Description Part Number 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. 16. 17. 18. 19. 20. 21. Screw Top Lid (Painted) Rear Access Plate Bushing (Lift Handle) Upper Column Plu.
7 Bowl Arms 1 3 4 5 8 9 6 7 12 11 10 14 16 15 2 13 20N-65.1M 20N-62Z 20N-65.1Z 17 18 19.
8 Bowl Arms Figure Number Description Part Number Ball (Black) Bowl Lift Lever Washer Disc With Arrow Retaining Disc Crank Arm Cotter Pin Key Snap Ring Lift Nut Jam Nut Lift Bolt Bowl Arm Shaft Snap Ring 25U Bowl Arm Snap Ring 25U Bowl Lift Lever Assembly Lift Bolt Assembly Bowl Arm Shaft Assembly STA 3306 20N-62Z STA 6066 20N47.
9 Pulley System 3 4 1 2 5 6 7 8.
10 Pulley System Figure Number Description Part Number Belt Motor Pulley Planetary Pulley Bolt 3/8-16X3/4 Washer Bolt M6X16 Washer Motor 20P-91 6J19 6J60 Local Purchase Item STA 6009 STA 5432 STA 6008 20D-85.
11 Planetary Head 31 33 34 35 27 28 29 30 25 26 14 15 16 17 18 19 12 20 21 22 23 10 9 4 6 7 8 1 2 3 20N-2.1Z 20N-3 20N-2 20N-2.1Z 20N-30 20-33 20-36 20N-101 5 11 24 32 13.
Planetary Head 12 Figure Number Description Part Number Snap Ring Bearing 6206 Snap Ring Bolt M6X16 Main Bearing Head Snap Ring Bearing 6206 Distance Piece Gear Wheel Rim Bolt M8X30 Main Shaft Snap Ri.
13 Attachment Drive 11 3 12 14 13 7 6 4 5 9 10 8 20N-10.6M 1 2 20N-10.6M #12 Hub 20N-10.5M #17 Hub 2” I.D. 1 1/2” I.D. 15.
14 Attachment Drive Figure Number Description Part Number Snap Ring Wormwheel Snap Ring Bearing Distance Piece Bearing Key Shaft F/ #17 Hub Shaft F/ #12 Hub O-ring Hub F/ #17 ( 2” I.
15 Computer Display Control 2 3 1 4 5 6 7.
16 Computer Display Control Figure Number Description Part Number Control Panel Assembly with start/stop buttons and computer display . Start Button Assembly Stop Button Assembly Screw Interface Board Assembly Front Plate Casting Ribbon Cable Cube Relay 20E-605M 31-174.
17 Bowl Screen 1 13 5 6 12 2 3 4 7 8 9 10 11 17 16 18 14 15.
Bowl Screen 18 Figure Number Description Part Number Bowl Screen Kit Bushing Cam Set Screw Screw Microswitch Set Screw Cam Spacer Bolt Nut Bushing Bracket Assembly Nut Bolt Rear Screen Front Screen Chute 225/20N 56SN20-21.1 56SN20-23 STA 5664 STA 5251 56SN20-30 STA 5664 56SN20-22.
19 Tools and Attachments 1, 2 19 19 19 4, 5 6, 7 8 12, 13 21, 21A 22, 22A 27 23, 23A 19 25 26 24 ,3 19 19 16 20.
20 Tools and Attachments Figure Number Description Part Number S/S Bowl 20Qt S/S Bowl 12Qt. S/S Bowl 25Qt. S/S Hook 20Qt. S/S Hook 12Qt. Flat Beater 20Qt. Flat Beater 12Qt. S/S Flat Beater 20 Qt. Wire Whip 20 Qt. Wire Whip 12 Qt. S/S Wing Whip 20 Qt. Pin Rack Bowl Scraper 20 Qt.
21 Wiring Diagram Start Stop N.O. N.C. .3 .4 .1 .2 J5 J6 J7 J8 Bowl Screen Microswitch 3 2 1 4 5 6 2 1 Blue White Green Red Black Orange 115V Motor Plug Black White Green.
22 Bowl Height Adjustment 1 2 3 5 6 4 7 10 8 9 A) Lower the bowl arms. B) Loosen the counter nut (2) and remove the cotter pin. (1) C) Remove the lifting bolt (6) and the lifting nut. (8) D) Adjust the bowl height by turning the lifting nut (8) either in or out, on the .
23 Planetary Head Removal 1 2 3 6 5 4 10 9 8 7 11 12 13 GREASE TYPES ..... -On repair of the planetary head: Grease the toothed wheel and the toothed rim with Nye Gel . 868VH, (PN WHITE GREASE), the needle bearings in the planetary head must not be ..
24 Planetary Head Removal 1. Remove the top lid (1), attachment hub (7), the drive belt (2) and the front .... control panel (4). 2 2. The plastic ring (13) can be removed with a screwdriver by pressing it .... between the plastic ring and the frame, and then prying it down.
5489 Campus Drive Shreveport LA 71129 (800) 222-1138 (318) 635-3131 Fax.
デバイスVarimixer W20Dの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Varimixer W20Dをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはVarimixer W20Dの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Varimixer W20Dの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Varimixer W20Dで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Varimixer W20Dを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はVarimixer W20Dの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Varimixer W20Dに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちVarimixer W20Dデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。