Velodyne AcousticsメーカーHGS-15X THXの使用説明書/サービス説明書
ページ先へ移動 of 20
Velodyne Acoustics, Inc. 345 Digital Drive Morgan Hill, CA 95037 408.465.2800 voice 408.779.9227 fax www.velodyne.com Service E-mail: service@velodyne.
15 ☞ Installation W orksheet Date: _____________ Model/Serial # ________________ Installed by: ____________________ Phone: _______________ Volume Setting: ____________ Output Level (dB): _________ Low Pass X-Over: _________ Hz Phase Pos.
13 ☞ The following conditions require service by a qualified technician: 1 . The power cord has become damaged. 2 . The unit does not appear to operate normally or exhibits a marked change in performance. 3 . The unit has been exposed to water. 4 . Some part of the cabinet or circuitry is physically damaged.
SPECIFICATIONS HGS-15X THX Ultra 2 Cabinet (H/W/D) 19.75" x 18" x 17-7/8" (49 x 45 x 45 cm) Frequency Response 18Hz - 120Hz +/- 3 dB Harmonic Distortion less than .
1 ☞ Congratulations! Congratulations on your purchase of a Velodyne subwoofer system. This system represents the absolute state of the art in accurate low frequency reproduction.
2 ☞ Product Features and Controls • 15" (12.7" piston diameter) subwoofer with tandem 3" voice coils and 220 oz. magnet • Built-in 1250 watt (RMS) high efficiency class D amplifie.
3 ☞ Important!!! Do not use both LINE LEVEL and SPEAKER LEVEL connections simultaneously! Volume control This control allows you to balance the output from the subwoofer to the main speakers/amplifier in your system. This control should be set to achieve similar output level from both the main speakers and subwoofer when listening to music.
4 ☞ A bypass switch is also provided if you wish to use an external crossover. If you are not using an external crossover, we recommend that you use the one provided within the unit for optimum perf.
External remote jack This connection allows an auxiliary infrared remote receiver "eye" to be installed and placed where most convenient. This option is usually only required when the subwoo.
6 ☞ 7 ☞ Subwoofer outputs The Velodyne subwoofer is designed to operate using the full range audio signal for input when using the built-in crossover. Some processors/receivers, have a "subwoofer out" jack that is internally filtered and designed to be used with a conventional amplifier and speaker.
6 ☞ 7 ☞ Subwoofer outputs The Velodyne subwoofer is designed to operate using the full range audio signal for input when using the built-in crossover. Some processors/receivers, have a "subwoofer out" jack that is internally filtered and designed to be used with a conventional amplifier and speaker.
External remote jack This connection allows an auxiliary infrared remote receiver "eye" to be installed and placed where most convenient. This option is usually only required when the subwoo.
4 ☞ A bypass switch is also provided if you wish to use an external crossover. If you are not using an external crossover, we recommend that you use the one provided within the unit for optimum perf.
3 ☞ Important!!! Do not use both LINE LEVEL and SPEAKER LEVEL connections simultaneously! Volume control This control allows you to balance the output from the subwoofer to the main speakers/amplifier in your system. This control should be set to achieve similar output level from both the main speakers and subwoofer when listening to music.
2 ☞ Product Features and Controls • 15" (12.7" piston diameter) subwoofer with tandem 3" voice coils and 220 oz. magnet • Built-in 1250 watt (RMS) high efficiency class D amplifie.
1 ☞ Congratulations! Congratulations on your purchase of a Velodyne subwoofer system. This system represents the absolute state of the art in accurate low frequency reproduction.
13 ☞ The following conditions require service by a qualified technician: 1 . The power cord has become damaged. 2 . The unit does not appear to operate normally or exhibits a marked change in performance. 3 . The unit has been exposed to water. 4 . Some part of the cabinet or circuitry is physically damaged.
SPECIFICATIONS HGS-15X THX Ultra 2 Cabinet (H/W/D) 19.75" x 18" x 17-7/8" (49 x 45 x 45 cm) Frequency Response 18Hz - 120Hz +/- 3 dB Harmonic Distortion less than .
15 ☞ Installation W orksheet Date: _____________ Model/Serial # ________________ Installed by: ____________________ Phone: _______________ Volume Setting: ____________ Output Level (dB): _________ Low Pass X-Over: _________ Hz Phase Pos.
Velodyne Acoustics, Inc. 345 Digital Drive Morgan Hill, CA 95037 408.465.2800 voice 408.779.9227 fax www.velodyne.com Service E-mail: service@velodyne.
デバイスVelodyne Acoustics HGS-15X THXの購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Velodyne Acoustics HGS-15X THXをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはVelodyne Acoustics HGS-15X THXの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Velodyne Acoustics HGS-15X THXの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Velodyne Acoustics HGS-15X THXで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Velodyne Acoustics HGS-15X THXを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はVelodyne Acoustics HGS-15X THXの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Velodyne Acoustics HGS-15X THXに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちVelodyne Acoustics HGS-15X THXデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
