ViewsonicメーカーCDX5550-Lの使用説明書/サービス説明書
ページ先へ移動 of 46
i CDP3235 CDP4235 CDP4235-T CDP4635 CDP4635-T CDX5550-L User Guide Model No. VS14694/VS14693/VS14709/VS14692/VS14710 VS14691 IMPORT ANT : Please read this User Guide to obtain important information on installing and using your product in a safe manner , as well as registering your product for future service.
i Compliance Information For U.S.A. This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
ii Impor tant Safet y Instruc tions 1. Read these instructions completely before using the equipment. 2. Keep these instructions in a safe place. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this equipment near water . W arning: T o reduce the risk of re or electric shock, do not expose this apparatus to rain or moisture.
iii Declarat ion of RoHS C omp liance This product has been designed and manufactured in compliance with Directive 2002/95/EC of the European Parliament and the Council on restriction of the use of ce.
iv Copyright Information Copyright © ViewSonic ® Corporation, 2012. All rights reserved. ViewSonic ® , the three birds logo, OnView ® , ViewMatch ™ , and ViewMeter ® are registered trademarks of ViewSonic ® Corporation. ENERGY STAR ® is a registered trademark of the U.
v T able Of Contents 1. Unpacking and Installation ............................................................................................................ 1 1.1. Unpacking ..........................................................................
vi 4.2.4. PIP menu ..................................................................................................................... 17 4.2.5. CONFIGURA TION1 menu ...................................................................................
1 1. Unpacking and Installation 1.1. Unpacking • This product is packed in a carton, together with the standard accessories. • Any other optional accessories will be packed separately . • Due to the size and weight of this display it is recommended for two people to move it.
2 1.4. Installing and Removing T able Stands (optional) T o install table stands: 1. Power off the display . 2. Spread a protective sheet on a at surface. 3. Grab the carrying handles and place the display face-down on the protective sheet. 4. After inserting the stand in the guide block, tighten the screws on both sides of the display .
3 1.5. Installing and Removing OPS module (CDP4235/CDP4635/CDX5550-L series) (optional) T o install OPS Module: 1. Power off the display . 2. Remove the cover of OPS after take screw off. 3. Insert OPS module and then x by screw . NOTE: Keep the OPS cover for future use.
4 1.6. Mounting on a W all T o mount this display to a wall, you will have to obtain a standard wall-mounting kit (commercially available). We recommend using a mounting interface that complies with TUV -GS and/or UL1678 standard in North America.
5 2. Parts and Functions 2.1. Control Panel MUTE INPUT MENU 1 9 10 2 3 4 5 6 7 8 CDP3235/CDP4235/CDP4635 series 5 4 3 2 1 6 7 8 CDX5550-L 9 MENU 10 1 POWER button Use this button to turn the display on or put the display to standby . 2 MUTE button Switch the audio mute ON/OFF .
6 2.2. Input/Output T erminals (OUT) CDP3235 CDP4235/CDP4635 series CDP3235 CDP4235/CDP4635/CDX5550-L series 16 1 2 3 4 6 7 9 11 10 13 14 10 8 5 15 15 (IN) (OUT) Pr Pb Y (IN) (IN) (OUT) 1 12 (OUT) 1 2 3 4 6 7 9 11 10 13 14 10 8 5 (IN) (OUT) 3 2 Pr Pb Y (IN) (IN) (OUT) 1 12 3 2 15 CDX5550-L 1 MAIN POWER SWITCH Press to switch the main power on/off.
7 2.3. Remote Control 2.3.1. General functions POWER SMART VIDEO SOURCE PIP INPUT ON/OFF CHANGE BRIGHTNESS CONTRAST DISPLAY AUTO ADJUST MUTE VOL UP VOL DOWN EXIT MENU SET AUDIO SOURCE 1 10 11 12 13 14 15 16 17 18 19 20 2 3 4 5 6 7 8 9 1 [POWER] button Press to switch on the display from standby mode.
8 2.3.2. Inserting the batteries in the remote control The remote control is powered by two 1.5V AAA batteries. T o install or replace batteries: 1. Press and then slide the cover to open it. 2. Align the batteries according to the (+) and (–) indications inside the battery compartment.
9 3. Connecting External Equipment 3.1. Using the Switch Cover A cover for the power switch is provided to prevent the display from being turned on or off accidentally . T o lock the cover into position: 1. Align and insert the cover to the indentation located beside the main switch.
10 3.2. Connecting External Equipment (DVD/VCR/VCD) 3.2.1. Using COMPONENT video input Audio Output To [AUDIO IN 2, 3] DVD / VCR / VCD COMPONENT (YPbPr) COMPONENT (YPbPr) 3.
11 3.3. Connecting a PC 3.3.1. Using VGA input To [VGA IN] PC or IBM compatible From analog VGA output Mini D-Sub 15 pin From audio output To [AUDIO IN 1, 2, 3] 3.
12 3.3.3. Using HDMI input To [HDMI IN] PC or IBM compatible From HDMI output 3.3.4. CONNECTING THE TOUCH MODULE There are two ways to connect the touch module. 1. Connect the USB cable on the display to a PC. The touch module supports easy Plug-and-Play operations.
13 3.4. External Audio Connection 3.4.1. Connecting external speakers External speaker 3.4.2. Connecting an external audio device Stereo Amplifier RCA Audio In To [AUDIO OUT].
14 3.5. Connecting Multiple Displays in a Daisy-chain Configuration Y ou can interconnect multiple displays to create a daisy-chain conguration for applications such as a video wall. NOTE: Maximum 9 displays can be used in a daisy-chain conguration.
15 4. OSD Menu An overall view of the On-Screen Display (OSD) structure is shown below . Y ou can use it as a reference for further adjusting your display . 4.1. Navigating the OSD Menu 4.1.1. Navigating the OSD menu using the remote control EXIT MENU SET 1.
16 GAMMA SELECTION Gamma is what controls the overall brightness of an image. Images which are not corrected properly can appear too white or too dark, so controlling the gamma properly can have a huge inuence on the overall picture quality of your display .
17 V ZOOM Expands the vertical size of the image only . H POSITION Moves the horizontal position of the image left or right. V POSITION Moves the vertical position of the image up or down. INPUT RESOLUTION Set the resolution of the VGA input. This is only required when the display is unable to detect the VGA input resolution correctly .
18 By pressing the [ PIP ON/OFF ] button on the remote control, you can change the mode in the order shown below: PIP POP SBS ASPECT SBS FULL OFF The resolutions in the PIP and POP modes are congur.
19 DA TE AND TIME Adjust the current date and time for the display’s internal clock. EXIT MENU :SEL +-:ADJ :RETURN :EXIT MENU DA TE AND TIME YEAR MONTH DAY HOUR MINUTE DAYLIGHT SAVING TIME 2011 08 04 20 20 OFF CURRENT DATE TIME 2011 . 08 . 04 00 : 18 : 10 1.
20 Example: 5 x 5 screen matrix (25 displays) H MONITORS = 5 displays V MONITORS = 5 displays 1 2 6 7 3 4 8 9 5 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 H MONITORS V MONITORS Position • H MONITORS - Select the number of displays on the horizontal side.
21 SCREEN SA VER Choose to enable the panel saving functions to reduce the risk of the “ image persistence ”. EXIT MENU :SEL +-:ADJ :RETURN :EXIT MENU SCREEN SA VER COOLING FAN BRIGHTNESS MOTION AUTO OFF OFF • { COOLING F AN } - Select { ON } to turn on the cooling fan all the time.
22 LAN SETTING Assign { IP ADDRESS }, { SUBNET MASK }, and { DEF AUL T GA TEW A Y } for the display . PIP 1 2 3 EXIT MENU :SEL DHCP CLIENT IP ADDRESS SUBNET MASK DEF AUL T GA TEWA Y LAN SETTING :RETURN :EXIT MENU OFF +-:ADJ • DHCP - Choose to enable or disable the DHCP function.
23 5. Input Mode VGA Resolution: Standard Resolution Active Resolution Refresh Rate Pixel Rate Aspect Ratio Stand for Mode H Pixels V Lines VGA 640 480 60 Hz 25.175 MHz 4:3 Video Graphic Array 480 72 Hz 31.5 MHz 480 75 Hz 31.5 MHz WVGA 720 400 70 Hz 33.
24 6. Cleaning and T roubleshooting 6.1. Cleaning Caution When Using the Display • Do not bring your hands, face or objects close to the ventilation holes of the display . The top of the display is usually very hot due to the high temperature of exhaust air being released through the ventilation holes.
25 6.2. T roubleshooting Symptom Possible Cause Remedy No picture is displayed 1. The power cord is disconnected. 2. The main power switch on the back of the display is not switched on. 3. The selected input has no connection. 4. The display is in standby mode.
26 7. T echnical Specifications CDP3235 Display: Item Specications Screen Size (Active Area) 80.1cm/32”(31.5” viewable) Diagonal, 697.689mm(H), 392.256mm(V) Aspect ratio 16:9 Number of pixels 1366 (H) x 768 (V) Pixel pitch 0.51075 (H) x 0.51075 (V) [mm] Displayable colors 16.
27 Gross Weight 16.5kg VESA Wall mount 400x200mm,200x200, M6 Environmental Condition: Item Specications T emperature Operational 0 ~ 40°C Storage -20 ~ 60°C Humidity Operational 20 ~ 80% RH (No c.
28 CDP4235/CDP4235-T Display: Item Specications Screen Size (Active Area) 42” LCD 106.7cm/42” Diagonal, 930.24mm(H), 523.26mm(V) Aspect ratio 16:9 Backlight CCFL Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.4845 (H) x 0.4845 (V) [mm] Displayable colors 16.
29 VESA Wall mount 400x200mm,200x200, M6 Gross Weight 27.5 Kg 26.8 Kg Environmental Condition: Item Specications T emperature Operational 0 ~ 40°C Storage -20 ~ 60°C Humidity Operational 20 ~ 80%.
30 CDP4635/CDP4635-T Display: Item Specications Screen Size (Active Area) 1 16.8cm/46” Diagonal , 1018.08mm(H), 572.67mm(V) Aspect ratio 16:9 Backlight CCFL Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.53025 (H) x 0.53025 (V) [mm] Displayable colors 16.
31 VESA Wall mount 400x400mm,400x200mm, M6 Gross Weight 31 Kg Environmental Condition: Item Specications T emperature Operational 0 ~ 40°C Storage -20 ~ 60°C Humidity Operational 20 ~ 80% RH (No .
32 CDX5550-L Display: Item Specications Screen Size (Active Area) 138.68cm/55”(54.6” Viewable) Diagonal, 1209.6mm(H), 680.4mm(V) Aspect ratio 16:9 Backlight Direct LED Number of pixels 1920 (H) x 1080 (V) Pixel pitch 0.63 (H) x 0.63 (V) [mm] Displayable colors 16.
33 Environmental Condition: Item Specications T emperature Operational 0 ~ 40°C Storage -20 ~ 60°C Humidity Operational 20 ~ 80% RH (No condensation) Storage 5 ~ 95% RH (No condensation) Altitude.
34 C ustomer Suppor t For technical support or product service, see the table below or contact your reseller . NOTE: Y ou will need the product serial number . Country/Region Website T = Telephone F = FAX Email Australia/New Zealand www.viewsonic.com.
35 Limited W arr ant y VIEWSONIC ® LCD Commercial Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period.
36 Limitation of implied warranties: There are no warranties, express or implied, which extend beyond the description contained herein including the implied warranty of merchantability and tness for a particular purpose. Exclusion of damages: ViewSonic’s liability is limited to the cost of repair or replacement of the product.
37 Mexico Limited Warranty VIEWSONIC ® LCD Commercial Display What the warranty covers: ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during the warranty period.
38 Contact Information for Sales & Authorized Service (Centro Autorizado de Servicio) within Mexico: Name, address, of manufacturer and importers: México, Av. de la Palma #8 Piso 2 Despacho 203, Corporativo Interpalmas, Col. San Fernando Huixquilucan, Estado de México Tel: (55) 3605-1099 http://www.
39.
デバイスViewsonic CDX5550-Lの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Viewsonic CDX5550-Lをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはViewsonic CDX5550-Lの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Viewsonic CDX5550-Lの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Viewsonic CDX5550-Lで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Viewsonic CDX5550-Lを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はViewsonic CDX5550-Lの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Viewsonic CDX5550-Lに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちViewsonic CDX5550-Lデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。