ViewSonicメーカーPJ510の使用説明書/サービス説明書
ページ先へ移動 of 49
PJ510 User Guide.
ViewSonic PJ510 i Content s For Your Records .......... ................. ................................................. .............. ............. 1 Features ................ ............................................... ......................
ii ViewSonic PJ510 OPTION Menu ........ ........................................................... ............................ ........... 29 Lamp ............... ................................. .............................................. .....
1 ViewSonic PJ510 Copyright © V iewSonic Corporation, 2003. All rights reserved. Apple, Mac and ADB registered tr ademarks of Apple Computer , Inc. Microsoft, W indows, W indows NT , and the W indows logo are registered trademarks of Microsoft Corporation in the United S tates and other countries.
ViewSonic PJ510 2 Features Projector Features This multimedia projector is used to project various computer signals as well as NTSC/P AL/ SECAM video signals onto a screen. Little space is required for installation and lar ge images can easily be realized.
3 ViewSonic PJ510 Part Names The Projector Projector (Front/Right) Fastening The Lens Cap T o avoid losing, please fasten the lens cap to the projector using the strap. 1 Fix the strap to the strap ring of lens cap, as the right drawing. 2 Put one piece of the strap into the groove on rivet, as the right drawing.
ViewSonic PJ510 4 Projector (Rear/Lef t) POWER indicator tells the state of power sup- ply . Refer to the section “T urning On/Off Power”. ST ANDBY/ON button prepares for turning the power on/off. Refer to the section “T urning On/Of f Power”.
5 ViewSonic PJ510 The Remote Control RGB button selects the input signal of RGB port . SEARCH button searches for an input signal between the following signal ports of RGB, VIDEO, S-VIDEO and COMPONENT VIDEO. AUTO button executes automatic adjustment (ST ANDBY/ON) button prepares for turning the power on/off.
ViewSonic PJ510 6 Setting Up Arrangement Refer to the illustrations and tables below to determine the screen s i ze and projection distance. The values shown in the table are ca lculated for a full si.
7 ViewSonic PJ510 Adjusting The Projector ’ s Elevator Y ou can use the elevator feet to make adjustme nts if the surface on which you need to set the projector is uneven or if you othe rwise need to adjust the angle of projection. The adjustment range of the elevator feet is 0 to 9 degrees.
ViewSonic PJ510 8 Connecting Y our Devices NOTE: About Plug-and-Pl ay Cap ability • This projector is compatible with VESA DDC 1/2B. Plug-an d-Play can be achieved by connecting this projector to computers that are VESA DDC (display data channel) compatible.
9 ViewSonic PJ510 Please refer to the following for connecting your devices. See the rear of the project or . Y ou can see the ports. Connecting to a computer RGB out RGB cable (D-sub 15 pin) Audio ou.
ViewSonic PJ510 10 Connecting Power Supply 1 Connect the connector of the power cord to the AC inlet of the projector . 2 Firmly plug the power cord’ s plug into the outlet. WA R N I N G • Please use extra caution when c onnecting the power cord as incorr ect or faulty connections may result in FIRE and/or ELECTRIC AL SHOCK.
11 ViewSonic PJ510 Remote Control Putting Batteries 1 Remove the battery cover . Slide back and remove the cover in the direction of the arrow . 2 Insert the batteries. Align and insert the two AA batteries according to their plus and minus terminals (as indicated in the remote control.
ViewSonic PJ510 12 Operating The Remote Control • The remote control works with the projector ’ s remote sensor . • The range of the remote sensor is 3 meters with a 60-degree range (30 degrees to the left a nd right of the remote sensor). Also a remote signal reflected in the screen etc.
13 ViewSonic PJ510 Power ON/OFF T urning On The Power NOTE: T urn the power on/of f in right order . Please power on the projector before the connected devices. Power off the projector af ter the connected devices. 1 Make sure that the power cord is firmly and correctly connected to the projector and outlet.
ViewSonic PJ510 14 Selecting An Input Signal 1 Using the projector ’ s control button Press the INPUT button. As illustrated below , each time you press the INPUT button, the projector switches between its input signal ports. Select the signal you wish to project.
15 ViewSonic PJ510 T urning Off The Power NOTE: T urn the power on/of f in right order . Please power on the projector before the connected devices. Power off the projector af ter the connected devices. 1 Press the ST ANDBY/ON button of the projector or the remote control.
ViewSonic PJ510 16 Operating Adjusting The V olume 1 Press the VOLUME button. As illustrated on the right, a dialog box will appear on the screen to aid you in adjusting the volume. 2 Use the ( S ), ( T ) buttons to a djust the volume. Press the VOLUME button again to close the dialog box and complete this operation.
17 ViewSonic PJ510 Adjusting The Position 1 Press the POSITION button. As illustrated on the right, a dialog box will appear on the screen to aid you in adjusting the position. 2 Use the ( W ), ( X ), ( S ), ( T ) buttons to adjust the position. When you want to initialize the position, press the RESET button during adjustment.
ViewSonic PJ510 18 Using The Automatic Adjustment Feature 1 Press the AUTO button. Automatic Adjustment for RGB Input Horizontal position (H.POS IT), vertical position (V .POSIT), clock phase (H.PHASE) and horizontal size (H.SIZ E) are automatically adjusted.
19 ViewSonic PJ510 Using The Magnify Feature 1 Press the MAGNIFY (ON) button The projector enters MAGNIFY mode. 2 Press the POSITION button, then use the ( W ), ( X ), ( S ), ( T ) buttons to select the area to zoom. Press the POSITION button agai n to finalize the zoom area.
ViewSonic PJ510 20 Signal Searching 1 Press the SEARCH button Cycles through input signals, displaying the images of retrieved signa ls. If no signal is found, it returns to the signal that was selected before the search was initialized. NOTE: • May not function properly with some input signals.
21 ViewSonic PJ510 Multifunctional Settings Using The Menu Functions This projector has the following menus: MAIN, PICTURE-1, PICTURE-2, INPUT , AUTO, SCREEN and OP TION. Each of these menus is operated using the same methods. The basic operations of these menus are as follows.
ViewSonic PJ510 22 MAIN Menu W ith the MAIN menu, the items shown in the T able below can be performed. Perform each operation in accordance with the instructions in the table below .
23 ViewSonic PJ510 PICTURE-1 Menu W ith the PICTURE-1 menu, the items shown in the T able below can be performed. Perform each operation in accord ance with the instructions in the table below .
ViewSonic PJ510 24 PICTURE-1 Menu (Continued) PICTURE-2 Menu W ith the PICTURE-2 menu, the items shown in the T able below can be performed. Perform each operation in accor dance with the instructions in the table below .
25 ViewSonic PJ510 INPUT Menu W ith the INPUT menu, the items shown in the T able below can be performed. Perform e ach ope ration in accordance with the instructions in the table below .
ViewSonic PJ510 26 INPUT Menu(Continued) Item Description VIDEO NR Select a Noise Reduction Mode: HIGH ( S ) Q ( T ) MIDDLE ( S ) Q ( T ) LOW • This function performs only at a VIDEO input or a S-VIDEO input. At a VIDE O inpu t of NTSC 3.58, this function performs only when the TURN OFF is selecte d under the 3D-YCS.
27 ViewSonic PJ510 AUT O Menu W ith the AUTO menu, the items shown in the T able below can be performed. Perform each operation in accordance with the instructions in the table below .
ViewSonic PJ510 28 SCREEN Menu W ith the SCREEN menu, the items s hown in the T able below can be performed. Perform each operation in accord ance with the instructions in the table below .
29 ViewSonic PJ510 OPTION Menu W ith the OP TION menu, the items shown in the T able below can be performed. Perform each operation in accordance with the instructions in the table below .
ViewSonic PJ510 30 Lamp HIGH V OL T AGE HIGH TEMPERA TURE HIGH PRESSURE WA R N I N G The projector uses a high-pressure mercury glass lamp made of glass. The lamp can br eak with a loud bang, or burn out , if jolted or scratched, handled while hot, or worn over time .
31 ViewSonic PJ510 Replacing The Lamp If the indicators or a message prompts you to replace the lamp, replace the lamp as s oon as possible. Using the lamp for long periods of time, or past the replacement date , co uld c aus e i t to bur st.
ViewSonic PJ510 32 Air Filter Caring For The Air Filter The air filter should be cleaned about every 100 hours. If the indicat ors or a message prompts you to clean the air filter , clean the air fi lter as soon as possible. If the air filter becomes clogged by dust or the like, internal temperature rises and could cause malfunction.
33 ViewSonic PJ510 Replacing The Air Filter If the soiling will not come off the air filter , or it becomes damaged, then it needs to be replaced. Please replace the air filter as soon as possible. 1 T urn of f the projector , and unplug the power cord.
ViewSonic PJ510 34 Other Care Caring For The Inside Of The Projector In order to ensure the safe use of your projector , please have it cleaned and inspected by your local dealer about once every 2 years. Never try to care for the inside of the unit yourself.
35 ViewSonic PJ510 T r oubleshooting Related Messages When the unit's power is ON, messages such as those shown below may be displayed. When any such message is displayed on the screen, please respond as described below .
ViewSonic PJ510 36 1 T urn of f the projector , and unplug the power cord. 2 After making sure that th e projector has cooled adequately , remove the filter cover . Hold the release buttons of the filte r cover , while pulling it up. 3 W ipe the transparent area of the filter cover by using a swab or a soft cloth.
37 ViewSonic PJ510 Regarding The Indicator Lamp s Lighting and flashing of the POWER indicator , the LAMP indicator , and the TEMP indicator have the meanings as described in the T able below . Pl ease respond in accordance with the instructions within the T able.
ViewSonic PJ510 38 POWER indicator LAMP indicator TEMP indi- cator Description Lighting or blanking in red Tu r n e d o ff Blinking in red The cooling fan is not operating.
39 ViewSonic PJ510 Phenomena That May Easily Be Mist aken For Machine Defect s NOTE : Although bright spots or dark spots may appear on the screen, this is a unique character istic of liquid crystal displays, and such do not cons titute or imply a machine defect.
ViewSonic PJ510 40 W arranty And Af ter-Service If a problem occurs with the equipment, first refe r to the “T roubleshooting” section of this manual, and run through the suggested checks. If this does not resolve the problem contact your dealer or service company .
41 Vi ewSo nic PJ 510 Specifications NOTE : : : : This specifications are subject to change without notice. (unit: mm) Item Specification Produc t name Liquid c rystal projector Liquid c rys- tal panel Panel si ze 1.4 cm (0 .55 type) Drive system T FT active matrix Pixels 480, 000 pi xels ( 800 horiz ontal x 600 ve rtical) Lens Zoom len s F=1.
ViewSonic PJ510 42 Customer Support For technical support or product se rvice, please contact V iewSonic. NOTE: Y ou will need the product serial number . Country/Region Web site T = T elephone F = F AX Email United S tates viewsonic.com/support T: (800) 688-6688 F: (909) 468-1202 service.
43 ViewSonic PJ510 LIMITED W ARRANTY VIEWSONIC PROJECTOR What the warranty co vers: ViewSonic ® warrants it s products to be free from defects in material and workmanship du ring the warranty period.
ViewSonic PJ510 44 Appendix Power Cord Safety Guidelines Caution: Use a power cable th at is properly grounded. Always use an AC power co rd that meets your country’s safety st andard. AC PLUG CORD PRECAUTION S FOR THE UNITED KINGDOM FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULL Y .
45 ViewSonic PJ510 Compliance Information for U.S.A. This equipment has been tested and found to comply wit h the limits for a Class B digit al device, pursuant to part 15 of the FC C Rules. Thes e limits are design ed to provide reasonable protection ag ainst harmful interference in a resident ial inst allation.
V iewSonic Corporation.
デバイスViewSonic PJ510の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
ViewSonic PJ510をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはViewSonic PJ510の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。ViewSonic PJ510の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。ViewSonic PJ510で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
ViewSonic PJ510を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はViewSonic PJ510の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、ViewSonic PJ510に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちViewSonic PJ510デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。