BelkinメーカーF1D104の使用説明書/サービス説明書
ページ先へ移動 of 18
T he OmniV iew S E 4-P ort User Manual P72464 F1D104 T he OmniV iew S E 4-P ort User Manual ™.
Thank you for purchasing the Belkin Components Omni View ™ SE KVM switch. Controlling multiple PCs fr om one keyboard, mouse and monitor has never been easier! The Omni Vie w ™ SE puts you in contr ol.
T echnical Specifications Console Connectors: Keyboard: 6 pin Mini DIN female Mouse: 6 pin Mini DIN female (for PS/2 mouse) DB9 male (for spare serial mouse) Monitor: HDDB15 female Computer Port Conne.
Pr oduct Detail SLA VE INPUT DB25 Daisy-chain port MASTER INPUT SLA VE OUTPUT DB25 Daisy-chain port DC power jack DIP switches Optional serial mouse connector CONSOLE connectors Keyboard connector PS/.
Make sur e you have the right cables! The Omni Vie w ™ SE r equires cables to connect the eight computers you will be controlling. Below ar e the Belkin part numbers and their descriptions. W e recommend pur chasing Cable Kits based on the type of mouse port your computer uses.
1. Set the DIP switches. If you have only one Omni Vi e w ™ SE, use the MASTER bank setting. If the Omni Vie w ™ SE you ar e using will be daisy-chained off another unit, use a unique slave setting. Please refer to the next section for mor e information regar ding multiple Omni Vie w ™ SE units.
4. Connect the keyboard and mouse to the Omni View ™ SE. If you have an A T -style keyboard, you will need an A T -PS/2 adapter (Belkin Part# F2N017).
Har dwar e Installation (continued) 6. Connect the first computer's mouse cable to the Omni Vie w ™ SE. If using a PS/2 cable (Belkin Part# F2N036-XX), connect one end to the PS/2 mouse port on the computer , and the other end to the PC1 PS/2 mouse port on the back of the Omni Vie w ™ SE.
Har dwar e Installation (continued) 11. Y ou can now power up all of your computers simultaneously . The first computer will show up on the monitor . Check to see if the keyboard and mouse work, as well as the image displayed on the screen. If this is okay , press the SELECT button and check the functionality of the other computers.
9 The Omni Vie w ™ SE is designed to be able to cascade with the Omni Vie w ™ PRO as well. In such a scenario, it is recommended that the Omni View ™ PRO be the MASTER unit, and the Omni Vie w ™ SE units be slave units. This is shown in the diagram above.
10 Daisy-Chained Operation (continued) Adding Slave Units This assumes you already have a MASTER unit (or MASTER and slave units) set-up and working properly . Below is the procedur e of daisy-chaining a new slave unit. • Set the DIP switches of the slave unit to a unique slave BANK setting.
Cable 1 Cable 2 Cable 3 MASTER (Bank 0) slave (Bank 2) slave (Bank 3) Daisy-Chaining the OmniView ™ SE: slave (Bank 1) 11 Daisy-Chained Operation (continued).
12 Usage Keyboard "Hot” Key commands: Y ou can also conveniently command the Omni Vi e w ™ SE to switch ports thr ough simple keyboard key sequences. T o send commands to the Omni Vie w ™ SE, the SCROLL LOCK key must be pressed twice within 2 seconds.
13 Usage (continued) Y ou can switch directly to any port by giving the Omni Vie w ™ SE the BANK and POR T numbers. For instance, if you press [SCROLL LOCK] [SCROLL LOCK] [2] [2], the com- puter on PORT 2 of the Omni View ™ SE set to BANK 2 will be selected.
14 T r oubleshooting General Problems: Q: When cascading, the MASTER unit does not see the slave unit(s). A: • Refer to the Hardwar e Installation section for information on how to properly connect the daisy-chain cable. • Make sur e that the daisy-chain cable that you are using is the F1D108-CBL.
15 T r oubleshooting (continued) Q: The computers boot up fine, but the mouse does not work. A: • Check the cables and make sure they ar e inserted properly in the corr ect ports. • Make sure the mouse works when dir ectly plugged into the computer .
16 T r oubleshooting (continued) work just as long as it is set for PS/2 mode with the correct adapter . A serial- only mouse with a combo mouse adapter WILL NOT work. • Check to make sure that the power adapter is plugged in and is working properly .
17 Infor mation Contacting Belkin Components www .belkin.com FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pr ovide reasonable protection against harmful inter- ference in a r esidential installation.
デバイスBelkin F1D104の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Belkin F1D104をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBelkin F1D104の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Belkin F1D104の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Belkin F1D104で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Belkin F1D104を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBelkin F1D104の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Belkin F1D104に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBelkin F1D104デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。