VTechメーカーVT 9122の使用説明書/サービス説明書
ページ先へ移動 of 25
1 TABLE OF CONTENTS IMPORT ANT SAFETY INSTRUCTIONS.................................................................................2 P ARTS CHECK LIST ....................................................................................................
2 IMPORT ANT SAFETY INSTRUCTIONS When using your telephone equipment, basic saf ety precautions should alwa ys be f ollowed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions.
3 P ARTS CHECK LIST 1 . Base Unit 2 . Handset 3 . Owner’s Man ual 4 . AC P ow er Adaptor 5 . T elephone Cord 6 . Battery Pac k 7 . Belt Clip 8 . W all Mounting Brack et Base Adaptor Belt Clip Handse.
4 HANDSET LA Y OUT 1 . Antenna 2 . LCD Displa y 3 . SELECT 4 . Na vigation Ke ys 5 . PHONE 6 . HOLD/DELETE 7 . MEM/NEW 8 . Headset J ack(2.5mm) 9 . OFF 10 .
5 B ASE LA Y OUT 1 . Phone Cord J ack 2 . Powe r Ja ck 3 . Message Indicator 4 . PO WER LED 5 . IN USE/CHARGE LED 6 . P AG E 3 4 5 6 TEL. LINE 9V DC TEL.
6 The Handset of your VT 9122 is powered by a rechargeab le batter y pack. It charges automati- cally whenev er the Handset is in the Base Unit. The batter y pack needs charging when: • The low battery icon is displayed: • A beep will be generated e very 7 seconds in T ALK mode only .
7 LANGU A GE SELECTION 1. Press PR OG /CHAN, displa y shows “ SET LANGU AGE? ” and the current setting (ENGLISH / FRANCAIS / ESP ANOL) is display ed. 2. Press or to cycle through the different language settings . 3. Press SELECT to confirm your choice .
8 The W all Mount bracket is designed f or use on standard Wall Mount plates only . 1. Line up the tabs on the wall mount adaptor with the holes on the bottom of the Base Unit. Snap the wall mount bra cket firmly in place. 2. Plug the AC adaptor into an electrical outlet, and the DC connector to the back of the Base Unit.
9 If the display sa ys: It means: The Handset is in idle mode Waiting f or dial tone ` Handset is in use Call is on Hold THE HANDSET DISPLA Y GETTING ST ARTED.
10 MAKING CALLS Method 1------Live Dialing Press PHONE . Dial the phone number . Press OFF to end your call. Method 2------Pre-dialing There are 24 digit. Dial the phone number , up to 24 digits. Use the DELETE ke y to backspace if you mak e a dialing mistake.
11 USING REDIAL 1. Press PHONE . Listen f or dial tone. 2. Press REDIAL/ P AUSE. The last number you called will automati- cally be redialed. OR 1. Press REDIAL so that the number is sho wn on the display . 2. Press PHONE It can also be used to store the last number dialed into the phone book.
12 CALLER ID/CALL W AITING ID NO TE : Caller ID and Call Waiting ID are subscription ser vices, pro vided by your regional phone company . Y ou must subscribe to these ser vices in order to benefit from the Caller ID features of y our VT 9122 . Contact your regional phone service provider for details.
13 DIALING FROM CALLER ID 1. Press or /CID until y ou find the desired record 2. Press SELECT to cycle through 3 different dialing strings: 7 digits f or example: 624-5688 10 digits f or example: 800-624-5688 11 digits f or example: 1-800-624-5688 3 .
14 AD V ANCED OPERA TION REVIEWING AND DIALING FROM THE PHONE BOOK PHONE BOOK DIALING 1 . With the Handset in the idle mode, press MEM/NEW and then the memory location number (0...9). If you don’t remember the location number , press or to scroll through all Phone Book entries.
15 Y our VT 9122 is capable of detecting a Visual Message Waiting signal, generated b y many phone ser vice providers . If you subscribe to V oiceMail ser vice from your local telephone company , and a Visual Message W aiting signal is provided, the Base Unit MESSAGE light will glow to alert you to new , unplayed messages .
16 AD V ANCED OPERA TION Y our VT 9122 cordless telephone is equipped with a 2.5mm Headset Ja ck for use with an optional accessory Headset for hands-free operation. If you choose to use the Headset option, you m ust do the following: INST ALLA TION * Obtain an optional accessory Head set, which is compatible with the VT 9122 .
17 T AKING CARE OF Y OUR TELEPHONE Y our cordless telephone contains sophisticated electronic par ts, so it m ust be treated with care. A V OID R OUGH TREA TMENT Place the Handset down gently . Save the original packing materials to protect your telephone if you e ver need to ship it.
18 ADDITIONAL INFORMA TION If you ha v e difficulty operating y our phone , the suggestions below should solv e the prob lem. If you still ha ve difficulty after trying these suggestions, In the US call: VTECH COMMUNICA TIONS at 1-800-595-9511. In Canada call: VTECH ELECTRONICS at 1-800-267-7377 .
19 THE HANDSET DOES NO T RING WHEN Y OU RECEIVE A CALL. • Ensure that the ringer is turned on. • Make sure the telephone line cord is plugged fir mly into the base unit and the telephone jac k. Make sure the po wer cord is plugged in. • Y ou may be too f ar from the base unit.
20 W ARRANTY ST A TEMENT WHA T DOES OUR W ARRANTY CO VER? * Any defect in material or workmanship . FOR HO W LONG AFTER THE ORIGINAL PURCHASE? * T o the original purchaser only-ONE YEAR. WHA T WILL VTECH DO? * At our option, repair or replace your unit.
21 HO W DOES ST A TE LA W OR PRO VINCIAL LA W RELA TE T O THIS W ARRANTY? * This warranty giv es you specific rights. Y ou may also ha ve other rights which vary from state to state or province to province. This equipment complies with P ar ts 15 and 68 of the F ederal Communications Commission ( FCC ) rules for the United States .
22 ADDITIONAL INFORMA TION The telephone company ma y ask you to disconnect this equipment from the line network until the problem has been corrected. FCC P art 15 W ar ning: Changes or modifications to this unit not expressly approved b y the par ty re- sponsible f or compliance's could void the user’ s authority to operate the equip- ment.
23 The REN is useful in determining the number of devices y ou may connect to y our telephone line and still enable the devices to ring when y ou receive a call. The gener al r ule is that the REN value should not e xceed 5.0 total; how ev er , contact your local telephone company f or the specific number in your area.
24 ADDITIONAL INFORMA TION FREQUENCY CONTROL Cr ystal Controlled Dual PLL Synthesizer TRANSMIT FREQUENCY Handset : 925.9 MHz to 927.9 MHz (All 40 channels within this range) Base Unit: 902.1 MHz to 904.1 MHz (All 40 channels within this range) RECEIVE FREQUENCY Handset : 902.
25 VTECH TELECOMMUNICA TIONS L TD. A member of THE VTECH GROUP OF COMP ANIES. Distributed in the U.S .A. by VT ech Communications Inc, Bea ver ton, Oregon, 97008 Distributed in the Canada by VT ech Electronics Canada Ltd., Suite 200-7671 Alderbridge W ay Richmond, B.
デバイスVTech VT 9122の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
VTech VT 9122をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはVTech VT 9122の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。VTech VT 9122の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。VTech VT 9122で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
VTech VT 9122を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はVTech VT 9122の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、VTech VT 9122に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちVTech VT 9122デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。