VTechメーカーVT 9162の使用説明書/サービス説明書
ページ先へ移動 of 42
1 TABLE OF CONTENTS IMPORT ANT SAFETY INSTRUCTIONS ............................................................................3 P ARTS CHECK LIST ........................................................................................................
2 CHANGING PLA YBA CK SPEED ...............................................................................26 A UT O DISCONNECT FOR EXTENSION PHONE PICK-UP .......................................27 MEMOR Y FULL ........................................
3 IMPORT ANT SAFETY INSTRUCTIONS When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury , including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product.
4 P ARTS CHECK LIST Parts Check List: 1. Base Unit 2. Handset 3. W all Mount Brack et 4. Owner’ s Manual 5 . AC Adaptor 6 . T elephone Line Cord 7 . Batter y Pac k 8 . Belt Clip T o purchase replacement batter y packs, call VTECH Communications at 1-800-595-9511.
5 HANDSET LA Y OUT 1. LCD Display 2 . SELECT 3. NA VIGA TION/V olume K eys 4 . PHONE 5. FLASH 6. HOLD 7. Antenna 8. Headset Jack 9. OFF 10. Dialing Ke y s 11.
6 B ASE UNIT LA Y OUT 1. MENU 2. SELECT 3. TIME/SET 4. REPEA T/SLO W 5. MESSAGE WINDOW 6. DELETE 7. MAILBO X PLA Y/STOP 8. REC/MEMO 9. V OLUME 10. ANSWER ON/OFF 11. SKIP/QUICK 12. IN USE/CHARGING 13. PA G E 14 . P ower J ack 15 . T elephone Line Jac k 9162 CANADA 1135 101 611A 0.
7 INST ALLA TION OF B A TTER Y P A CK IN HANDSET GETTING ST AR TED The Handset of your VT 9162 is powered by a rechargeab le batter y pack. It charges automati- cally whene ver the Handset is in the Base Unit.
8 GETTING ST AR TED SETTING UP Y OUR VT9162 When fully charged, you will experience up to 5 hours of continuous talk, or up to 6 days of standby (off the cradle, but not in use). RINGER SELECTION 1. Press PROG /CHAN. 2. Press or until RINGER is displayed.
9 W ALL MOUNTING GETTING ST AR TED The W all Mount br ack et is designed for use on standard W all Mount plates only . 1. Line up the tabs on the wall mount adaptor with the holes on the bottom of the Base Unit. Snap the wall mount bracket firmly in place.
10 THE HANDSET DISPLA Y It means: The Handset is in idle mode A telephone line has not been connected to the Base Unit. Or the line is out of service. Indicates incoming call Waiting f or dial tone Ha.
11 B ASIC OPERA TION B ASIC OPERA TION MAKING CALLS Method 1------Live Dialing Press PHONE . Dial the phone number . Press OFF to end your call. Method 2------Pre-dialing Dial the phone number . Use the ke y to backspace if you mak e a dialing mistak e .
12 B ASIC OPERA TION USING REDIAL 1. Press PHONE . Listen for dial tone. 2. Press REDIAL/ P A USE. The last n umber y ou called will automatically be redialed. OR 1. Press REDIAL . The number will appear on the displa y . 2. Press PHONE . NOTE: If you press REDIAL twice, the redial number will be deleted.
13 B ASIC OPERA TION HOLD T o place your call on hold, press HOLD . Press HOLD again to return to your call. NOTE: If y ou have a call on hold, and pic k up a parallel e xtension phone, your VT 9162 will automatically drop the call and return to idle mode.
14 NO TE : Caller ID and Call W aiting ID are subscr iption ser vices, provided b y your regional phone company . Y ou m ust subscribe to these ser vices in order to benefit from the Caller ID features of your VT 9162. Contact your regional phone service provider for details .
15 CALLER ID /CALL W AITING ID AD V ANCED OPERA TION DELETING RECORDS FROM CALL HIST OR Y DELETE A SPECIFIC CALL 1 . Locate the record you want to delete from call history . 2 . Press SELECT , then press until ERASE flashes. 3 . Press SELECT . The screen displa ys ERASE NO YES ALL and the phone number .
16 5 . Press SELECT . Y ou can now edit the PHONE NUMBER. Press to backspace in order to edit the phone number . 6. Press SELECT . Y our CID record is now in your Phone Book directory . DISPLA Y SCREEN MESSA GES Screen Display: When: PRIV A TE NAME The other party is blocking name information.
17 This cordless phone can store 20 telephone numbers with names, each up to 16 digits long. Entries are stored alphabetically . F or consistency with Caller ID entries, y ou ma y wish to enter last names first. Note: Press OFF at any time to e xit memory .
18 PHONE BOOK EDIT NUMBERS ST ORED IN MEMOR Y 1 . Press (DIR). The screen displa ys DIRECT OR Y . 2 . Press or to scroll alphabetically through numbers stored in memory -OR- Press the dial pad key for the first letter of the entry you want to edit. 3 .
19 AD V ANCED OPERA TION OPTIONAL HEADSET INST ALLA TION & OPERA TING INSTRUCTIONS Y our VT 9162 cordless telephone is equipped with a 2.5mm Headset Jac k for use with an optional accessory Headset for hands-free operation.
20 ANSWERING SYSTEM SETUP Answering System Programming Overview Setup order for the Answering System is: During Answering System setup, the display will flash “ -- ”. If no key is pressed for 20 seconds, the Answering System will beep , and exit prog ram mode.
21 Itad Operation 2. Press REC/MEMO , ”Now recording”, is announced, follo w ed by a beep . Speak towards the front of the Answering System ( max. length: 90 seconds ). 3. Press an y MAILBO X ke y to stop the recording. 4. Y our outgoing message is pla y ed f or you, follo wed by a beep .
22 ANSWERING SYSTEM SETUP Day and Time During initial setup, or after a power failure, the day and time default is set to Monday, 12:00am. The display will flash "CL" to indicate day and time need to be set . 1. Press MENU unit you hear, "Set day and time.
23 Itad Operation ANSWERING SYSTEM SETUP Set Announce Only CAUTION: If you turn on the Announce Only option, your callers cannot leave a message . 1. Press MENU until "Set Announce Only" is announced. 2. Press SELECT until desired setting "ON" or "OFF" is declared.
24 ANSWERING SYSTEM OPERA TIONS Leaving a Message (Incoming Message) The Answering System will answer a call (according to the current ring selection), then play the OGM, followed by a beep to signal the start of recording. • Default mailbox is MAILBOX 1.
25 Itad Operation Saving Messages • The Answering System will automatically save your messages if you do not delete them. The messages will be retained even after a power failure.
26 Itad Operation Check Current Day and Time You can check the current day and time by pressing TIME/SET . After the announcement, the Answering System will generate a beep . ANSWERING SYSTEM OPERATIONS Changing Speaker Volume If you prefer to not hear messages while your callers leave them (call screening), set the volume to the minimum level (1).
27 Itad Operation Auto Disconnect for Extension Phone Pick-up The Answering System will auto-disconnect the telephone line if an extension phone or the cordless Handset accesses the line.
28 ANSWERING SYSTEM OPTERATIONS BASE UNIT MESSAGE WINDOW (LED) • The large Base Unit LED provides useful data on the status of your VT 9162 answering device.
29 REMOTE OPERATION OF ANSWERING SYSTEM Remote operation allows you to control the functions of the Answering System when you are away from the Base, and call from an outside telephone line. The Answering System cannot be accessed from another telephone on the same line.
30 Skip Messages During Playback 1. Press " #6 " once to skip forward to the next message. Stop Message Playback 1. Pressing " #5 " during message playback will stop playback. Deleting Messages 1. Press " #9 " once during message playback to delete the current message.
31 * Voice Menu for Remote Operation The system provides two pre-recorded voice menus to help you during remote operation. Press " 5 ", and you will hear the simple voice menu. The simple voice menu is as follows: Press " # 1 " to play mailbox 1.
32 MAINTENANCE T aking Care Of Y our T elephone Your cordless telephone contains sophisticated electronic parts, so it must be treated with care. Avoid rough treatment Place the Handset down gently. Save the original packing materials to protect your telephone if you ever need to ship it.
33 IN CASE OF DIFFICUL TY If you have difficulty operating your phone, the suggestions below should solve the problem. If you still have difficulty after trying these suggestions, In the US call: VTECH COMMUNICA TIONS at 1-800-595-9511. In Canada call: VTECH ELECTRONICS at 1-800-267-7377 .
34 THE HANDSET DOES NO T RING WHEN Y OU RECEIVE A CALL. • Ensure that the ringer is turned on. • Make sure the telephone line cord is plugged firmly into the base unit and the telephone jack. Make sure the power cord is plugged in. • Y ou may be too far from the base unit.
35 W ARRANTY ST A TEMENT What does this limited warranty cover? • The manufacturer of this VTECH product, VTECH Communications, warr ants to the holder of a valid proof of purchase ("Consumer&q.
36 ADDITIONAL INFORMA TION W ARRANTY ST A TEMENT How do you get warranty service? • T o obtain w arranty ser vice in the United States of Amer ica, call 1-800-595-9511 for instructions regarding where to return the Product. Before calling for service, please check the user's manual.
37 FCC AND IC REGULA TIONS This equipment complies with Parts 15 of the Federal Communications Commission (FCC) rules for the United States. It also complies with regulations RSS210 and CS-03 of Industry and Science Canada.
38 FCC and A CT A Inf ormation If this equipment was approved for connection to the telephone network prior to July 23,2001. It was registered with the F ederal Commissions (FCC) in accordance with P ar t 68 of its rules.
39 a. We recommend that you also write the telephone number on the directory card, so that you can still dial the emergency number manually if the memory dialing feature doesn't work. b. This feature is provided only as a convenience, and the manufacturer assumes no responsibility for customer reliance upon the memory feature.
40 FCC AND IC REGULA TIONS Users should ensure for their own protection that the electrical ground connections of the power utility, telephone lines and internal metallic water pipe system, if present, are connected together. This precaution may be particularly important in rural areas.
41 FREQUENCY CONTROL Crystal Controlled Dual PLL Synthesizer TRANSMIT FREQUENCY Handset: 923.10 MHz to 927.75 MHz (All 30 channels within this range) Base: 902.30 MHz to 906.65 MHz (All 30 channels within this range) RECEIVE FREQUENCY Handset: 902.3 MHz to 906.
42 VTECH TELECOMMUNICA TIONS L T D . A member of THE VTECH GROUP OF COMP ANIES. Distributed in the U .S.A. by VT ech Communications Inc.; Beav erton, OR, 97008 Distributed in Canada b y VT ech Electronics Canada Ltd.; Suite 200,7671 Alderbr idge Wa y , Rich- mond, B.
デバイスVTech VT 9162の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
VTech VT 9162をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはVTech VT 9162の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。VTech VT 9162の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。VTech VT 9162で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
VTech VT 9162を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はVTech VT 9162の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、VTech VT 9162に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちVTech VT 9162デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。