BelkinメーカーF5D8013の使用説明書/サービス説明書
ページ先へ移動 of 44
F5 D8 01 3 N Wir el ess Notebook Car d User Manual.
T abl e of Contents 1 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Be ne fi ts of a Ho me Ne tw or k . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Intr oduction section 1 1 2 3 4 5 6 Thank you for pur chasing the Belkin N Wireless Notebook Card. Now you can take advantage of this great new technology and gain the freedom to network your home and office computers wir elessly . This Card allows you to connect a notebook computer to your network.
Intr oduction 2 2 Placement of your Wireless Networking Hardware for Optimal Performance Y our wireless connection will be stronger the closer your computer is to your wireless router (or access point). T ypical indoor operating range for your wireless devices is between 100 and 200 feet.
3 Intr oduction section 3 1 2 3 4 5 6 2. Avoid Obstacles and Interference Avoid placing your wireless router (or access point) near devices that may emit radio “noise”, such as microwave ovens.
Intr oduction 4 4 4. Choose the “Quietest” Channel for your Wireless Network In locations where homes or offices are close together , such as apartment buildings or of fice complexes, there may be wireless networks nearby that can conflict with yours.
5 Overvie w section 5 2 3 4 5 6 Pr oduct F eatures The Card complies with the IEEE draft-802.11n specification to communicate with other draft-802.11n-compliant wireless devices at up to 300Mbps*. The Card is also compatible with 802.11g devices at 54Mbps as well as 802.
Overvie w 6 6 Applications and Advantages • Wir eless roaming with a laptop around the home or of fice Offers the fr eedom of networking—without cables • Connection rates of up to 54Mbps Provides immediate wir eless connectivity at home, work, and hotspot locations without compromising the use of existing 802.
7 Overvie w section 7 1 2 3 4 5 6 (a) Power LED Lights up when the Card is powered up (b) Link/Activity LED Lights up when the Card is connected; flashes when wireless activity is detected (c) Card Co.
Installing and Setting up the Car d 8 8 A. Installation Pr ocess f or Windows Vista ***NOTE: At the time of initial release of this product, Windows Vista drivers wer e not available for release and might not be included on the CD shipped with your product.
9 Installing and Setting up the Car d section 9 1 2 3 4 5 6 A.4 Select a destination folder for the software installation by clicking “Browse”; or , simply click “Next” to select a default location. A.5 A Setup Status scr een will let you know where you are in the setup process.
Installing and Setting up the Car d 10 10 A. 9 The Found New Hardware Wizard might appear within 3–15 seconds. If it does, continue to follow the prompts. Select “Locate and install the driver software” to continue. A.10 Y ou might see a screen similar to the one pictured below .
11 Installing and Setting up the Car d section 11 1 2 3 4 5 6 A.14 In the next screen, select an available wireless network and click “Connect”. A.13 In the Network and Sharing Center , click on “Connect to a network”. A.15 Y our Card will attempt to connect to the selected network.
Installing and Setting up the Car d 12 12 B. IInstallation Pr ocess f or Windows Operating Systems other than Windows Vista IMPORT ANT : INST ALL THE SOFTWARE BEFORE INSERTING THE CARD. B.1 Insert the Installation Software CD into your CD-ROM drive. A.
13 Installing and Setting up the Car d section 13 1 2 3 4 5 6 B.3 The InstallShield Wizar d starts the installation process. B.4 Select a destination folder for the software installation by clicking “Browse”; or , simply click “Next” to select a default location.
Installing and Setting up the Car d 14 14 B.9 Y ou might see a screen similar to this one. This DOES NOT mean there is a problem. Our software has been fully tested and is compatible with this operating system. Select “Continue Anyway” and follow the on-screen instructions.
15 Installing and Setting up the Car d section 15 1 2 3 4 5 6 C. Configuration Using the Belkin Wirel ess Networking Utility C.1 After restarting your computer , double-click the Belkin Wir eless Networking Utility icon on the desktop screen. No t e : The Belkin Wireless Networking Utility icon can also be found on the system tray .
Using the Belkin Wir eles s Networking Utility 16 16 After successfully installing the Belkin Wir eless Networking Utility (WNU), configurations for wir eless connection and security are just a few easy clicks away .
17 Using the Belkin Wir eles s Networking Utility section 17 1 2 3 4 5 6 The WNU’ s default screen is the “Curr ent Status” tab. The “Current Status” tab displays the current network status and available networks. Network Status This window displays the connectivity status of the current network.
Using the Belkin Wir eles s Networking Utility 18 18 Connection Failur e Other options will appear during attempts to reconnect. T o stop connecting, click “Stop” and to reattempt connection, click “Retry”. Network Status and Solution Tips T o further understand the current Network Status, click “Open Wireless Utility”.
19 Using the Belkin Wir eles s Networking Utility section 19 1 2 3 4 5 6 The WNU also featur es a “Solution Tips” section that pr ovides troubleshooting guidelines. Set ting Wi r el ess Ne twor k Pr ofil es The “My Connections” tab on the WNU allows you to add, edit, and delete connection profiles.
Using the Belkin Wir eles s Networking Utility 20 20 Note: When you select a network using encryption, you will first see the simple security scr een. Click the “Advanced” button to see other security options (below). Wir ed Equi val en t Priv acy (W EP) is a less secur e, but more widely adopted wireless security protocol.
21 Using the Belkin Wir eles s Networking Utility section 21 1 2 3 4 5 6 Wir el ess Pr otec ted Ac c ess (W P A) is the new standard in the wireless security . However , not all wir eless cards and adapters support this technology . Please check your wireless adapter’ s user manual to check if it supports WP A.
Using the Belkin Wir eles s Networking Utility 22 22 128-Bit Encryption As a result of 64-bit WEP’ s potential security weaknesses, a more secure method of 128-bit encryption was developed. 128-bit encryption includes a key length of 104 bits plus 24 additional bits of system-generated data (128 bits total).
23 Using the Belkin Wir eles s Networking Utility section 23 1 2 3 4 5 6 WP A W PA is a new Wi-Fi standard that improves upon the security features of WEP . T o use WP A security , the drivers and software of your wireless equipment must be upgraded to support it.
Using the Belkin Wir eles s Networking Utility 24 24 Changing the Wir eless Security Settings The Belkin N Wir eless Notebook Card supports the latest WP A security feature as well as the legacy WEP security standard. By default, wireless security is disabled.
25 Using the Belkin Wir eles s Networking Utility section 25 1 2 3 4 5 6 WEP Se tup 64-Bit WEP Encryption 1. Select “WEP” fr om the “Data Encryption” dr op-down menu. 2. After selecting your WEP encryption mode, you can enter your key by typing in the hex key manually .
Using the Belkin Wir eles s Networking Utility 26 26 WA RNING : If you are using a wireless client to turn on the security settings in your wir eless router (or access point), you will temporarily lose your wireless connection until you activate security on your wireless client.
27 Using the Belkin Wir eles s Networking Utility section 27 1 2 3 4 5 6 3. Click “Save” to finish. Encryption in the wireless router (or access point) is now set. Each of the computers on your wireless network will now need to be configured with the same security settings.
Using the Belkin Wir eles s Networking Utility 28 28 3. Click “Save” to finish. Y ou must now set all clients (network cards) to match these settings. Wir eless Networking Utility Options The “Options” tab on the WNU provides the user the ability to customize his or her WNU settings.
29 Using the Belkin Wir eles s Networking Utility section 29 1 2 3 4 5 6 Advanc ed Diagnostic T ools The “Advanced Diagnostic T ools” section is the central control panel for all the settings of the hardware and softwar e components of the wireless network.
T r oubl eshooting 30 30 I can ’t co nnec t to the In tern et wir el essl y. If you are unable to connect to the Internet from a wireless computer , please check the following items: 1. Look at the lights on your wireless router . If you’re using a Belkin Wireless Router , the lights should be as follows: • The “Power” light should be on.
31 T r oubl eshooting section 31 1 2 3 4 5 6 3. The exact window that opens will vary depending on the model of wireless card you have; however , any of the utilities should have a list of “A vailable Networks”. Available networks are wireless networks to which you can connect.
T r oubl eshooting 32 32 The name of your wir eless network DOES NOT appear in the list of “ A vailable Networks”. If the correct network name is not listed, check the SSID settings to see if they match.
33 T r oubl eshooting section 33 1 2 3 4 5 6 Lin k LED is bl inki ng sl owl y; I cann ot co nnec t to a wir el ess ne two rk or the In tern et. If your Card appears to be functioning properly , but yo.
T r oubl eshooting 34 34 Dat a tra nsf er is som etim es sl ow. Wireless technology is radio-based, which means connectivity and the throughput performance between devices decreases when the distance between devices incr eases.
35 T r oubl eshooting section 35 1 2 3 4 5 6 Limiting the wireless transmit rate – Limiting the wireless transmit rate can help improve the maximum wireless range, and connection stability . Most wireless cards have the ability to limit the transmission rate.
T r oubl eshooting 36 36 Car d does not perform or c onnection is unstable when computer has a second built-in wir eless network card (such as a mini PCI or Intel ® Centrino ™ ). This condition occurs if your computer has a built-in wireless card while your Belkin Wir eless Card is also active.
37 T r oubl eshooting section 37 1 2 3 4 5 6 Belkin Wirel ess Comparison Chart Wireless T echnology G (802.11g) G Plus MIMO (802.11g with MIMO MRC) N MIMO (draft 802.
T r oubl eshooting 38 38 T echnical Support Y ou can find technical support information at ww w.bel kin.c om/ net worki ng . If you want to contact technical support by phone, please call: US: 877- 736-5 771 UK: 08 45 607 77 87 Aus tral ia: 1800 23 5 546 New Ze aland : 080 0 235 546 Sin gapor e: 800 61 6 1790 Eur ope : www.
39 Information section 39 1 2 3 4 6 FCC Statement DECLARA TION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMP A TIBILITY W e, Belkin International, Inc., of 501 W est Walnut Street, Compton, CA 90220, declare under our sole responsibility that the product, F5D8013 to which this declaration relates, complies with Part 15 of the FCC Rules.
Information 40 40 Modifications The FCC requir es the user to be notified that any changes or modifications to this device that ar e not expressly appr oved by Belkin International, Inc., may void the user’ s authority to operate the equipment. Belkin Inter national, Inc.
41 Information section 41 1 2 3 4 5 6 Belkin reserves the right to review the damaged Belkin product. All costs of shipping the Belkin pr oduct to Belkin for inspection shall be borne solely by the purchaser .
Belkin Ltd. 4 Pioneer Avenue T uggerah Business Park T uggerah, NSW 2259, Australia +61 (0) 2 4350 4600 +61 (0) 2 4350 4700 fax Belkin B.V . Boeing Avenue 333 1119 PH Schiphol-Rijk, The Netherlands +31 (0) 20 654 7300 +31 (0) 20 654 7349 fax Belkin T ech Support US: 877-736-5771 310-898-1100 ext.
デバイスBelkin F5D8013の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Belkin F5D8013をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはBelkin F5D8013の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Belkin F5D8013の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Belkin F5D8013で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Belkin F5D8013を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はBelkin F5D8013の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Belkin F5D8013に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちBelkin F5D8013デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
