WalkerメーカーW52C2DWWBの使用説明書/サービス説明書
ページ先へ移動 of 15
Item #: W52C2DW Assembly Instructions For our most current instructions, to request missing, lost or broken parts, or for any other Customer Service issues, please visit our website at www .
Gener al Assembly Guidelines I. Ensure that all parts and hardware are available before beginning assembly . II. Follow each step carefully to ensure the proper assembly of this product. III. T wo people are recommended for ease in the assembly of this product.
Parts List.
Hardware List Extra-large screw Flange screw Handle Drawer stopper.
Insert large dowels (A) into side panels (1,2). Screw cam bolts (C) into side panels (1,2). Insert small dowels (B) into panels (7,8) and slats (3,9). Insert large dowels (A) into slat (3). Attach door stoppers (L) to slat (3) using large screws (N). Attach drawer stopper (M) to slat (9) using medium screw (P).
Attach slat (6) to bottom panel (4) using cam bolt and dowels as guides. Insert cam lock (D) into slat (6) and tighten with a screwdriver . Screw leg (5) into bottom panel (4). Insert large dowels (A) into slat (6). Insert small dowels (B) into bottom panel (4).
Join panels (7,8) together with slat (9). Use dowels as guides. Screw cam bolts (C) into bottom panel (4). Attach drawer stopper (M) to bottom panel (4) using medium screw (P).
Attach slat (3) to the assembly from the previous step using dowels as a guide. Attach the panel assembly from the previous step to bottom panel (4) using cam bolts and dowels as guides. Insert cam locks (D) into panels (7,8) and tighten with a screwdriver .
Attach side panel (2) to the opposite side of the assembly from Step 8 using cam bolts and dowels as guides. Insert cam locks (D) into panel (4) and slats (3,6). T ighten cam locks (D) with a screwdriver . Attach side panel (1) to the assembly from the previous step using cam bolts and dowels as guides.
Insert cam locks (D) into the assembly from Step 10. Attach top panel (10) to the assembly using cam bolts and dowels as guides. T ighten cam locks (D) with a screwdriver .
Attach back panels (1 1,12) to the assembly from the previous step using flange screws (F). Note that back panels (12) will overlap back panel (1 1). Carefully place glass panes (16) into door frames (14,15).
Attach drawer sides (18,19) to drawer back (20) using extra-large screws (E). Note that the thin grooves at the base of each drawer piece will align along the inside of the drawer assembly . Repeat this step for the second drawer . Secure glass panes (16) by attaching metal washers (K) to door frames (14,15) with small screws (Q).
Secure drawer front (17) to the drawer assembly using extra-large screws (E). Attach handle (H) to drawer front (17) using bolt (J). Repeat this step for the second drawer . Slide drawer bottom (21) into place along the thin grooves of the drawer assembly .
Carefully slide both drawers into the stand assembly . Attach doors (14,15) to the stand assembly using medium screws (P) at the hinges. Attach handles (H) to doors (14,15) using bolts (J).
Insert shelf support pins (G) into the stand assembly at the desired shelf heights. Place shelves (13) on shelf support pins (G)..
デバイスWalker W52C2DWWBの購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Walker W52C2DWWBをまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWalker W52C2DWWBの技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Walker W52C2DWWBの取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Walker W52C2DWWBで得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Walker W52C2DWWBを既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWalker W52C2DWWBの不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Walker W52C2DWWBに関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWalker W52C2DWWBデバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。