WeiderメーカーWEBE14080の使用説明書/サービス説明書
ページ先へ移動 of 16
USER’S MANUAL QUESTIONS? As a manufacturer , we are com- mitted to providing complete customer satisfaction. If you have questions, or find that there are missing or damaged parts, we will guarantee you complete sat- isfaction through direct assis- tance from our factory .
2 LIMITED W ARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3 W ARNING: T o reduce the risk of serious injury , read the following important precau- tions before using the weight bench. 1. Read all instructions in this manual before using the weight bench. 2. Use the weight bench only as described in this manual.
4 Backrest Support Rod “H”-Frame Left Arm Seat Weight T ube Right Arm Leg Lever Weight T ube Large Weight Locking Collar Small Weight Barbell Thank you for selecting the versatile WEIDER ® 141 weight bench. The WEIDER ® 141 weight bench is designed to let you develop every major muscle group of the body .
5 This chart is provided to help you identify the small parts used in assembly . Important: Some parts may have been pre-assembled for shipping purposes. If you cannot find a part in the parts bags, check to see if it has been pre-assembled. The number in parenthesis below each part refers to the key number of the part.
6 Before beginning assembly , carefully read the following information and instructions: • Place all parts in a cleared area and remove the packing materials; do not dispose of the packing materials until assembly is completed. • T ighten all parts as you assemble them, unless instructed to do otherwise.
7 3. Be sure that the “H”-Frame (1) is oriented as shown. The high side of the weight rests must be on the side indicated. Attach the Main Frame (2) to the “H”-Frame (1) with two 5/16” x 2 1/4” Bolts (16) and two 5/16” Nylon Locknuts (19).
8 7. Attach one Backrest Bracket (5) to the Backrest (6) with two 1/4” x 3/4” Screws (13). Be sure the Backrest Bracket is oriented as shown. Attach the other Backrest Bracket to the Backrest with one 1/4” x 3/4” Screw . Be sure the Backrest Bracket is also oriented as shown.
9 1 1. Press two 3/8” Plastic Sleeves (37) into the “H”- Frame (1) as shown. Lubricate a 3/8” x 5” Bolt (8). Insert the Bolt through the hole in the indicated Fly Arm (42). Slide a 3/8” W asher (9) onto the Bolt. Insert the Bolt through the “H”-Frame and the Plastic Sleeves (37).
10 ADJUSTING THE BACKREST The Backrest (6) can be used in either a level position or an inclined position. T o use the Backrest in a level position, remove the Support Rod (7) and lay the Backrest on the Main Frame (2). T o use the Backrest (6) in an inclined position, first lift the Backrest.
THE FOUR BASIC TYPES OF WORKOUTS • Muscle Building In order to increase the size and strength of your muscles, you must push your muscles to a high per- centage of their capacity . Y ou must also progressively increase the intensity of your exercise so that your muscles will continually adapt and grow .
12 for 3 minutes after each set if you are doing a muscle building workout, 1 minute after each set if you are doing a toning workout, and 30 seconds after each set if you are doing a weight loss workout. Plan to spend the first couple of weeks familiarizing yourself with the equipment and learning the proper form for each exercise.
13 MONDA Y Date: / / EXERCISE WEIGHT SETS REPS EXERCISE WEIGHT SETS REPS EXERCISE WEIGHT SETS REPS AEROBIC EXERCISE AEROBIC EXERCISE TUESDA Y Date: / / WEDNESDA Y Date: / / THURSDA Y Date: / / FRIDA Y Date: / / Make photocopies of this page for scheduling and recording your workouts.
14 Key No. Qt y . Description 1 1 “H”-Frame 2 1 Main Frame 3 1 Stabilizer 4 1 Leg Lever 5 2 Backrest Bracket 6 1 Backrest 7 1 Support Rod 8 2 3/8” x 5” Bolt 9 4 3/8” W asher 10 2 Pad T ube 1.
21 10 1 21 45 45 3 27 11 19 25 25 23 23 26 14 19 18 16 16 6 5 13 13 12 12 7 16 13 30 24 23 4 26 41 15 19 31 36 20 17 35 34 22 9 43 9 24 29 24 39 30 33 23 26 40 19 32 42 28 36 8 9 9 24 43 44 2 38 24 37 30 33 39 28 40 32 19 24 23 26 42 8 37 24 15 Exploded Drawing - Model No.
Part No. 148342 H02754-C R1200A Printed in Canada © 2000 ICON Health & Fitness, Inc. T o order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday , 6 a.m. until 6 p.m. Mountain T ime (excluding holidays).
デバイスWeider WEBE14080の購入後に(又は購入する前であっても)重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります:
Weider WEBE14080をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWeider WEBE14080の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Weider WEBE14080の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Weider WEBE14080で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Weider WEBE14080を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWeider WEBE14080の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Weider WEBE14080に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWeider WEBE14080デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。