Wesloメーカー831.295021の使用説明書/サービス説明書
ページ先へ移動 of 19
Model No. 831.295021 Serial No. Write the serial number in the space above for future reference. CAUTION Read all precautions and instruc- tions in this manual before using this equipment.
2 T ABLE OF CONTENTS IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
16. The treadmill is capable of high speeds. Adjust the speed in small increments to avoid sudden jumps in speed. 17 . Never leave the treadmill unattended while it is running. Always remove the key and unplug the power cord when the treadmill is not in use.
4 BEFORE YOU BEGIN Handrail Console Storage Latch Key/Clip Circuit Breaker W alking Belt Foot Rails Incline Leg Power Cord FRONT BACK RIGHT SIDE Rear Roller Adjustment Bolts W ater Bottle Holder (Bottle not included) Upright Thank you for selecting the WESLO ® CADENCE 78S treadmill.
5 ASSEMBL Y Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
6 3. If there are plastic ties in the brackets on the Handrails (4), remove the plastic ties. Hold one of the Handrails near the right Upright (38) as shown. Insert the W ire Harness (53) up through the bracket on the Handrail and out of the round hole in the side of the Handrail.
66 5 38 7 7. Attach the Storage Latch (66) to the left Upright (38) with two 3/4” Screws (5). 8. Make sure that all parts used in assembly are properly tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 13).
8 OPERA TION AND ADJUSTMENT THE PRE-LUBRICA TED WALKING BEL T Y our treadmill features a walking belt coated with high- performance lubricant. IMPORT ANT : Never apply sil- icone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear .
9 DIAGRAM OF THE CONSOLE Speed Control Incline Control Displays STEP-BY -STEP CONSOLE OPERA TION Before operating the console, make sure that the power cord is properly plugged in (see page 8). Next, locate the circuit break - er near the power cord. Make sure that the circuit breaker is in the reset position.
10 As you exercise, change the speed of the walking belt as desired by pressing the Speed butto ns. Each time a button is pressed, the speed setting will change by 0.1 mph; if a button is held down, the speed setting will change in increments of 0.5 mph.
1 1 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR ST ORAGE Before folding the treadmill, unplug the power cord. CAUTION: Y ou must be able to safely lift 45 pounds (20 kg) to raise, lower or move the treadmill. 1. Hold the treadmill with your hands in the locations shown at the right.
12 MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below . Find the symptom that applies, and follow the steps listed. If further assistance is needed, call toll-free 1-800-4-MY -HOME ® (1-800-469-4663) .
13 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 8. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may become damaged.
14 CONDITIONING GUIDELINES The following guidelines will help you to plan your exercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician.
T raining Zone Exercise After warming up, increase the intensity of your exer- cise until your pulse is in your training zone for 20 to 60 minutes. (During the first few weeks of your exer - cise program, do not keep your pulse in your training zone for longer than 20 minutes.
Remove this chart and use it to identify small parts during assembly . Save this chart and the EXPLODED DRA WING/P ART LIST for future reference. P ART IDENTIFICA TION CHART 3/4Ó Screw (5)Ð13 1Ó Bo.
P ART LIST—Model No. 831.295021 R1204A 1 4 Front Endcap Screw 2 6 Star W asher 3 2 Plastic T ie 4 2 Handrail 5 24 3/4” Screw 6 1 Key/Clip 7 1 Hole Plug 8 1 Incline Leg 9 2 Handrail Endcap 10 1 Wir.
EXPLODED DRA WINGÑModel No. 831.295021 R0804A 28 30 45 28 28 7 5 94 66 5 41 42 43 41 43 33 28 33 28 41 43 33 31 7 54 82 97 98 99 6 76 69 68 81 27 1 1 28 28 33 28 33 34 28 31 31 28 57 76 46 47 85 80 4.
Part No. 218103 R1204A Printed in USA © 2004 Sears, Roebuck and Co. FULL 90 DA Y W ARRANTY For 90 days from the date of purchase, if failure occurs due to defect in material or workmanship in this Se.
デバイスWeslo 831.295021の購入後に（又は購入する前であっても）重要なポイントは、説明書をよく読むことです。その単純な理由はいくつかあります：
Weslo 831.295021をまだ購入していないなら、この製品の基本情報を理解する良い機会です。まずは上にある説明書の最初のページをご覧ください。そこにはWeslo 831.295021の技術情報の概要が記載されているはずです。デバイスがあなたのニーズを満たすかどうかは、ここで確認しましょう。Weslo 831.295021の取扱説明書の次のページをよく読むことにより、製品の全機能やその取り扱いに関する情報を知ることができます。Weslo 831.295021で得られた情報は、きっとあなたの購入の決断を手助けしてくれることでしょう。
Weslo 831.295021を既にお持ちだが、まだ読んでいない場合は、上記の理由によりそれを行うべきです。そうすることにより機能を適切に使用しているか、又はWeslo 831.295021の不適切な取り扱いによりその寿命を短くする危険を犯していないかどうかを知ることができます。
ですが、ユーザガイドが果たす重要な役割の一つは、Weslo 831.295021に関する問題の解決を支援することです。そこにはほとんどの場合、トラブルシューティング、すなわちWeslo 831.295021デバイスで最もよく起こりうる故障・不良とそれらの対処法についてのアドバイスを見つけることができるはずです。たとえ問題を解決できなかった場合でも、説明書にはカスタマー・サービスセンター又は最寄りのサービスセンターへの問い合わせ先等、次の対処法についての指示があるはずです。
